extcon: usbc-tusb320: Add USB TYPE-C support

The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
which can expose details collected by the TUSB320 in a far more
precise way than extcon. Since there are existing users in the
kernel and in DT which depend on the extcon interface, keep it
for now.

Add TYPE-C interface and expose the supported supply current,
direction and connector polarity via the TYPE-C interface.

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This commit is contained in:
Marek Vasut 2022-07-30 20:05:00 +02:00 коммит произвёл Chanwoo Choi
Родитель 9483811a12
Коммит bf7571c00d
2 изменённых файлов: 160 добавлений и 1 удалений

Просмотреть файл

@ -183,7 +183,7 @@ config EXTCON_USBC_CROS_EC
config EXTCON_USBC_TUSB320
tristate "TI TUSB320 USB-C extcon support"
depends on I2C
depends on I2C && TYPEC
select REGMAP_I2C
help
Say Y here to enable support for USB Type C cable detection extcon

Просмотреть файл

@ -6,6 +6,7 @@
* Author: Michael Auchter <michael.auchter@ni.com>
*/
#include <linux/bitfield.h>
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
@ -13,6 +14,24 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/usb/typec.h>
#define TUSB320_REG8 0x8
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2)
#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5
#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6
#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
#define TUSB320_REG9 0x9
#define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
@ -55,6 +74,10 @@ struct tusb320_priv {
struct extcon_dev *edev;
struct tusb320_ops *ops;
enum tusb320_attached_state state;
struct typec_port *port;
struct typec_capability cap;
enum typec_port_type port_type;
enum typec_pwr_opmode pwr_opmode;
};
static const char * const tusb_attached_states[] = {
@ -184,6 +207,44 @@ static struct tusb320_ops tusb320l_ops = {
.get_revision = tusb320l_get_revision,
};
static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
{
u8 mode;
if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
else /* No other mode is supported. */
return -EINVAL;
return regmap_write_bits(priv->regmap, TUSB320_REG8,
TUSB320_REG8_CURRENT_MODE_ADVERTISE,
FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
mode));
}
static int tusb320_port_type_set(struct typec_port *port,
enum typec_port_type type)
{
struct tusb320_priv *priv = typec_get_drvdata(port);
if (type == TYPEC_PORT_SRC)
return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
else if (type == TYPEC_PORT_SNK)
return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
else if (type == TYPEC_PORT_DRP)
return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
else
return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
}
static const struct typec_operations tusb320_typec_ops = {
.port_type_set = tusb320_port_type_set,
};
static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
{
int state, polarity;
@ -211,6 +272,47 @@ static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
priv->state = state;
}
static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
{
struct typec_port *port = priv->port;
struct device *dev = priv->dev;
u8 mode, role, state;
int ret, reg8;
bool ori;
ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
TYPEC_ORIENTATION_NORMAL);
state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
TUSB320_REG9_ATTACHED_STATE_MASK;
if (state == TUSB320_ATTACHED_STATE_DFP)
role = TYPEC_SOURCE;
else
role = TYPEC_SINK;
typec_set_vconn_role(port, role);
typec_set_pwr_role(port, role);
typec_set_data_role(port, role == TYPEC_SOURCE ?
TYPEC_HOST : TYPEC_DEVICE);
ret = regmap_read(priv->regmap, TUSB320_REG8, &reg8);
if (ret) {
dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
return;
}
mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
else /* Charge through accessory */
typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
}
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
@ -225,6 +327,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
tusb320_extcon_irq_handler(priv, reg);
tusb320_typec_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
@ -260,6 +363,58 @@ static int tusb320_extcon_probe(struct tusb320_priv *priv)
return 0;
}
static int tusb320_typec_probe(struct i2c_client *client,
struct tusb320_priv *priv)
{
struct fwnode_handle *connector;
const char *cap_str;
int ret;
/* The Type-C connector is optional, for backward compatibility. */
connector = device_get_named_child_node(&client->dev, "connector");
if (!connector)
return 0;
/* Type-C connector found. */
ret = typec_get_fw_cap(&priv->cap, connector);
if (ret)
return ret;
priv->port_type = priv->cap.type;
/* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
if (ret)
return ret;
ret = typec_find_pwr_opmode(cap_str);
if (ret < 0)
return ret;
if (ret == TYPEC_PWR_MODE_PD)
return -EINVAL;
priv->pwr_opmode = ret;
/* Initialize the hardware with the devicetree settings. */
ret = tusb320_set_adv_pwr_mode(priv);
if (ret)
return ret;
priv->cap.revision = USB_TYPEC_REV_1_1;
priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
priv->cap.orientation_aware = true;
priv->cap.driver_data = priv;
priv->cap.ops = &tusb320_typec_ops;
priv->cap.fwnode = connector;
priv->port = typec_register_port(&client->dev, &priv->cap);
if (IS_ERR(priv->port))
return PTR_ERR(priv->port);
return 0;
}
static int tusb320_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@ -300,6 +455,10 @@ static int tusb320_probe(struct i2c_client *client,
if (ret)
return ret;
ret = tusb320_typec_probe(client, priv);
if (ret)
return ret;
/* update initial state */
tusb320_irq_handler(client->irq, priv);