microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

mtd: rawnand: qcom: avoid writing to obsolete register 

QPIC_EBI2_ECC_BUF_CFG register got obsolete from QPIC V2.0 onwards.
Avoid writing this register if QPIC version is V2.0 or newer.

Signed-off-by: Md Sadre Alam <mdalam@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1623134916-562-1-git-send-email-mdalam@codeaurora.org
This commit is contained in:
Md Sadre Alam 2021-06-08 12:18:36 +05:30 коммит произвёл Miquel Raynal
Родитель f856c4e9cf
Коммит bfb34eced5
1 изменённых файлов: 12 добавлений и 6 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

18
drivers/mtd/nand/raw/qcom_nandc.c
Просмотреть файл

@ -734,6 +734,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
{
struct nand_chip *chip = &host->chip;
u32 cmd, cfg0, cfg1, ecc_bch_cfg;
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
if (read) {
if (host->use_ecc)
@ -762,7 +763,8 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i
nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0);
nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1);
nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg);
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
if (!nandc->props->qpic_v2)
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg);
nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus);
nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus);
nandc_set_reg(chip, NAND_EXEC_CMD, 1);
@ -1133,7 +1135,8 @@ static void config_nand_page_read(struct nand_chip *chip)
write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
if (!nandc->props->qpic_v2)
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0);
write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1,
NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL);
@ -1191,8 +1194,9 @@ static void config_nand_page_write(struct nand_chip *chip)
write_reg_dma(nandc, NAND_ADDR0, 2, 0);
write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0);
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
NAND_BAM_NEXT_SGL);
if (!nandc->props->qpic_v2)
write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1,
NAND_BAM_NEXT_SGL);
}
/*
@ -1248,7 +1252,8 @@ static int nandc_param(struct qcom_nand_host *host)
| 2 << WR_RD_BSY_GAP
| 0 << WIDE_FLASH
| 1 << DEV0_CFG1_ECC_DISABLE);
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
if (!nandc->props->qpic_v2)
nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE);
/* configure CMD1 and VLD for ONFI param probing in QPIC v1 */
if (!nandc->props->qpic_v2) {
@ -2688,7 +2693,8 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
| ecc_mode << ECC_MODE
| host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH;
host->ecc_buf_cfg = 0x203 << NUM_STEPS;
if (!nandc->props->qpic_v2)
host->ecc_buf_cfg = 0x203 << NUM_STEPS;
host->clrflashstatus = FS_READY_BSY_N;
host->clrreadstatus = 0xc0;