From bfb34eced5595ee137e46d83d12b50d4ef6fc0c9 Mon Sep 17 00:00:00 2001 From: Md Sadre Alam Date: Tue, 8 Jun 2021 12:18:36 +0530 Subject: [PATCH] mtd: rawnand: qcom: avoid writing to obsolete register QPIC_EBI2_ECC_BUF_CFG register got obsolete from QPIC V2.0 onwards. Avoid writing this register if QPIC version is V2.0 or newer. Signed-off-by: Md Sadre Alam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/1623134916-562-1-git-send-email-mdalam@codeaurora.org --- drivers/mtd/nand/raw/qcom_nandc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 45de67aa86a4..ef0badea4f41 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -734,6 +734,7 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i { struct nand_chip *chip = &host->chip; u32 cmd, cfg0, cfg1, ecc_bch_cfg; + struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip); if (read) { if (host->use_ecc) @@ -762,7 +763,8 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read, i nandc_set_reg(chip, NAND_DEV0_CFG0, cfg0); nandc_set_reg(chip, NAND_DEV0_CFG1, cfg1); nandc_set_reg(chip, NAND_DEV0_ECC_CFG, ecc_bch_cfg); - nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg); + if (!nandc->props->qpic_v2) + nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, host->ecc_buf_cfg); nandc_set_reg(chip, NAND_FLASH_STATUS, host->clrflashstatus); nandc_set_reg(chip, NAND_READ_STATUS, host->clrreadstatus); nandc_set_reg(chip, NAND_EXEC_CMD, 1); @@ -1133,7 +1135,8 @@ static void config_nand_page_read(struct nand_chip *chip) write_reg_dma(nandc, NAND_ADDR0, 2, 0); write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); - write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); + if (!nandc->props->qpic_v2) + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL); @@ -1191,8 +1194,9 @@ static void config_nand_page_write(struct nand_chip *chip) write_reg_dma(nandc, NAND_ADDR0, 2, 0); write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); - write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, - NAND_BAM_NEXT_SGL); + if (!nandc->props->qpic_v2) + write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, + NAND_BAM_NEXT_SGL); } /* @@ -1248,7 +1252,8 @@ static int nandc_param(struct qcom_nand_host *host) | 2 << WR_RD_BSY_GAP | 0 << WIDE_FLASH | 1 << DEV0_CFG1_ECC_DISABLE); - nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE); + if (!nandc->props->qpic_v2) + nandc_set_reg(chip, NAND_EBI2_ECC_BUF_CFG, 1 << ECC_CFG_ECC_DISABLE); /* configure CMD1 and VLD for ONFI param probing in QPIC v1 */ if (!nandc->props->qpic_v2) { @@ -2688,7 +2693,8 @@ static int qcom_nand_attach_chip(struct nand_chip *chip) | ecc_mode << ECC_MODE | host->ecc_bytes_hw << ECC_PARITY_SIZE_BYTES_BCH; - host->ecc_buf_cfg = 0x203 << NUM_STEPS; + if (!nandc->props->qpic_v2) + host->ecc_buf_cfg = 0x203 << NUM_STEPS; host->clrflashstatus = FS_READY_BSY_N; host->clrreadstatus = 0xc0;