rtc: add support for DS3232 RTC
Add a driver for the DS3232 RTC chip via the I2C bus. Alarms are not supported in this version of the driver. [akpm@linux-foundation.org: fix Kconfig help text] Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Jingchang Lu <b22599@freescale.com> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Cc: Kumar Gala <kumar.gala@freescale.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Roy Zang
Linus Torvalds
Родитель
2f11e57dad
Коммит
c03675f05f
|
|
@ -166,6 +166,16 @@ config RTC_DRV_DS1672
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-ds1672.
|
||||
|
||||
config RTC_DRV_DS3232
|
||||
tristate "Dallas/Maxim DS3232"
|
||||
depends on RTC_CLASS && I2C
|
||||
help
|
||||
If you say yes here you get support for Dallas Semiconductor
|
||||
DS3232 real-time clock chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-ds3232.
|
||||
|
||||
config RTC_DRV_MAX6900
|
||||
tristate "Maxim MAX6900"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -41,6 +41,7 @@ obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o
|
|||
obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
|
||||
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
|
||||
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
|
||||
obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o
|
||||
obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o
|
||||
obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o
|
||||
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,326 @@
|
|||
/*
|
||||
* RTC client/driver for the Maxim/Dallas DS3232 Real-Time Clock over I2C
|
||||
*
|
||||
* Copyright (C) 2009-2010 Freescale Semiconductor.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
/*
|
||||
* It would be more efficient to use i2c msgs/i2c_transfer directly but, as
|
||||
* recommened in .../Documentation/i2c/writing-clients section
|
||||
* "Sending and receiving", using SMBus level communication is preferred.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/workqueue.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define DS3232_REG_SECONDS 0x00
|
||||
#define DS3232_REG_MINUTES 0x01
|
||||
#define DS3232_REG_HOURS 0x02
|
||||
#define DS3232_REG_AMPM 0x02
|
||||
#define DS3232_REG_DAY 0x03
|
||||
#define DS3232_REG_DATE 0x04
|
||||
#define DS3232_REG_MONTH 0x05
|
||||
#define DS3232_REG_CENTURY 0x05
|
||||
#define DS3232_REG_YEAR 0x06
|
||||
#define DS3232_REG_ALARM1 0x07 /* Alarm 1 BASE */
|
||||
#define DS3232_REG_ALARM2 0x0B /* Alarm 2 BASE */
|
||||
#define DS3232_REG_CR 0x0E /* Control register */
|
||||
# define DS3232_REG_CR_nEOSC 0x80
|
||||
# define DS3232_REG_CR_INTCN 0x04
|
||||
# define DS3232_REG_CR_A2IE 0x02
|
||||
# define DS3232_REG_CR_A1IE 0x01
|
||||
|
||||
#define DS3232_REG_SR 0x0F /* control/status register */
|
||||
# define DS3232_REG_SR_OSF 0x80
|
||||
# define DS3232_REG_SR_BSY 0x04
|
||||
# define DS3232_REG_SR_A2F 0x02
|
||||
# define DS3232_REG_SR_A1F 0x01
|
||||
|
||||
struct ds3232 {
|
||||
struct i2c_client *client;
|
||||
struct rtc_device *rtc;
|
||||
struct work_struct work;
|
||||
|
||||
/* The mutex protects alarm operations, and prevents a race
|
||||
* between the enable_irq() in the workqueue and the free_irq()
|
||||
* in the remove function.
|
||||
*/
|
||||
struct mutex mutex;
|
||||
int exiting;
|
||||
};
|
||||
|
||||
static struct i2c_driver ds3232_driver;
|
||||
|
||||
static int ds3232_check_rtc_status(struct i2c_client *client)
|
||||
{
|
||||
int ret = 0;
|
||||
int control, stat;
|
||||
|
||||
stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
||||
if (stat < 0)
|
||||
return stat;
|
||||
|
||||
if (stat & DS3232_REG_SR_OSF)
|
||||
dev_warn(&client->dev,
|
||||
"oscillator discontinuity flagged, "
|
||||
"time unreliable\n");
|
||||
|
||||
stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F);
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* If the alarm is pending, clear it before requesting
|
||||
* the interrupt, so an interrupt event isn't reported
|
||||
* before everything is initialized.
|
||||
*/
|
||||
|
||||
control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
||||
if (control < 0)
|
||||
return control;
|
||||
|
||||
control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE);
|
||||
control |= DS3232_REG_CR_INTCN;
|
||||
|
||||
return i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
||||
}
|
||||
|
||||
static int ds3232_read_time(struct device *dev, struct rtc_time *time)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
int ret;
|
||||
u8 buf[7];
|
||||
unsigned int year, month, day, hour, minute, second;
|
||||
unsigned int week, twelve_hr, am_pm;
|
||||
unsigned int century, add_century = 0;
|
||||
|
||||
ret = i2c_smbus_read_i2c_block_data(client, DS3232_REG_SECONDS, 7, buf);
|
||||
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (ret < 7)
|
||||
return -EIO;
|
||||
|
||||
second = buf[0];
|
||||
minute = buf[1];
|
||||
hour = buf[2];
|
||||
week = buf[3];
|
||||
day = buf[4];
|
||||
month = buf[5];
|
||||
year = buf[6];
|
||||
|
||||
/* Extract additional information for AM/PM and century */
|
||||
|
||||
twelve_hr = hour & 0x40;
|
||||
am_pm = hour & 0x20;
|
||||
century = month & 0x80;
|
||||
|
||||
/* Write to rtc_time structure */
|
||||
|
||||
time->tm_sec = bcd2bin(second);
|
||||
time->tm_min = bcd2bin(minute);
|
||||
if (twelve_hr) {
|
||||
/* Convert to 24 hr */
|
||||
if (am_pm)
|
||||
time->tm_hour = bcd2bin(hour & 0x1F) + 12;
|
||||
else
|
||||
time->tm_hour = bcd2bin(hour & 0x1F);
|
||||
} else {
|
||||
time->tm_hour = bcd2bin(hour);
|
||||
}
|
||||
|
||||
time->tm_wday = bcd2bin(week);
|
||||
time->tm_mday = bcd2bin(day);
|
||||
time->tm_mon = bcd2bin(month & 0x7F);
|
||||
if (century)
|
||||
add_century = 100;
|
||||
|
||||
time->tm_year = bcd2bin(year) + add_century;
|
||||
|
||||
return rtc_valid_tm(time);
|
||||
}
|
||||
|
||||
static int ds3232_set_time(struct device *dev, struct rtc_time *time)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
u8 buf[7];
|
||||
|
||||
/* Extract time from rtc_time and load into ds3232*/
|
||||
|
||||
buf[0] = bin2bcd(time->tm_sec);
|
||||
buf[1] = bin2bcd(time->tm_min);
|
||||
buf[2] = bin2bcd(time->tm_hour);
|
||||
buf[3] = bin2bcd(time->tm_wday); /* Day of the week */
|
||||
buf[4] = bin2bcd(time->tm_mday); /* Date */
|
||||
buf[5] = bin2bcd(time->tm_mon);
|
||||
if (time->tm_year >= 100) {
|
||||
buf[5] |= 0x80;
|
||||
buf[6] = bin2bcd(time->tm_year - 100);
|
||||
} else {
|
||||
buf[6] = bin2bcd(time->tm_year);
|
||||
}
|
||||
|
||||
return i2c_smbus_write_i2c_block_data(client,
|
||||
DS3232_REG_SECONDS, 7, buf);
|
||||
}
|
||||
|
||||
static irqreturn_t ds3232_irq(int irq, void *dev_id)
|
||||
{
|
||||
struct i2c_client *client = dev_id;
|
||||
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
||||
|
||||
disable_irq_nosync(irq);
|
||||
schedule_work(&ds3232->work);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void ds3232_work(struct work_struct *work)
|
||||
{
|
||||
struct ds3232 *ds3232 = container_of(work, struct ds3232, work);
|
||||
struct i2c_client *client = ds3232->client;
|
||||
int stat, control;
|
||||
|
||||
mutex_lock(&ds3232->mutex);
|
||||
|
||||
stat = i2c_smbus_read_byte_data(client, DS3232_REG_SR);
|
||||
if (stat < 0)
|
||||
goto unlock;
|
||||
|
||||
if (stat & DS3232_REG_SR_A1F) {
|
||||
control = i2c_smbus_read_byte_data(client, DS3232_REG_CR);
|
||||
if (control < 0)
|
||||
goto out;
|
||||
/* disable alarm1 interrupt */
|
||||
control &= ~(DS3232_REG_CR_A1IE);
|
||||
i2c_smbus_write_byte_data(client, DS3232_REG_CR, control);
|
||||
|
||||
/* clear the alarm pend flag */
|
||||
stat &= ~DS3232_REG_SR_A1F;
|
||||
i2c_smbus_write_byte_data(client, DS3232_REG_SR, stat);
|
||||
|
||||
rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF);
|
||||
}
|
||||
|
||||
out:
|
||||
if (!ds3232->exiting)
|
||||
enable_irq(client->irq);
|
||||
unlock:
|
||||
mutex_unlock(&ds3232->mutex);
|
||||
}
|
||||
|
||||
static const struct rtc_class_ops ds3232_rtc_ops = {
|
||||
.read_time = ds3232_read_time,
|
||||
.set_time = ds3232_set_time,
|
||||
};
|
||||
|
||||
static int __devinit ds3232_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct ds3232 *ds3232;
|
||||
int ret;
|
||||
|
||||
ds3232 = kzalloc(sizeof(struct ds3232), GFP_KERNEL);
|
||||
if (!ds3232)
|
||||
return -ENOMEM;
|
||||
|
||||
ds3232->client = client;
|
||||
i2c_set_clientdata(client, ds3232);
|
||||
|
||||
INIT_WORK(&ds3232->work, ds3232_work);
|
||||
mutex_init(&ds3232->mutex);
|
||||
|
||||
ret = ds3232_check_rtc_status(client);
|
||||
if (ret)
|
||||
goto out_free;
|
||||
|
||||
ds3232->rtc = rtc_device_register(client->name, &client->dev,
|
||||
&ds3232_rtc_ops, THIS_MODULE);
|
||||
if (IS_ERR(ds3232->rtc)) {
|
||||
ret = PTR_ERR(ds3232->rtc);
|
||||
dev_err(&client->dev, "unable to register the class device\n");
|
||||
goto out_irq;
|
||||
}
|
||||
|
||||
if (client->irq >= 0) {
|
||||
ret = request_irq(client->irq, ds3232_irq, 0,
|
||||
"ds3232", client);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "unable to request IRQ\n");
|
||||
goto out_free;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
out_irq:
|
||||
if (client->irq >= 0)
|
||||
free_irq(client->irq, client);
|
||||
|
||||
out_free:
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(ds3232);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int __devexit ds3232_remove(struct i2c_client *client)
|
||||
{
|
||||
struct ds3232 *ds3232 = i2c_get_clientdata(client);
|
||||
|
||||
if (client->irq >= 0) {
|
||||
mutex_lock(&ds3232->mutex);
|
||||
ds3232->exiting = 1;
|
||||
mutex_unlock(&ds3232->mutex);
|
||||
|
||||
free_irq(client->irq, client);
|
||||
flush_scheduled_work();
|
||||
}
|
||||
|
||||
rtc_device_unregister(ds3232->rtc);
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(ds3232);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ds3232_id[] = {
|
||||
{ "ds3232", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ds3232_id);
|
||||
|
||||
static struct i2c_driver ds3232_driver = {
|
||||
.driver = {
|
||||
.name = "rtc-ds3232",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = ds3232_probe,
|
||||
.remove = __devexit_p(ds3232_remove),
|
||||
.id_table = ds3232_id,
|
||||
};
|
||||
|
||||
static int __init ds3232_init(void)
|
||||
{
|
||||
return i2c_add_driver(&ds3232_driver);
|
||||
}
|
||||
|
||||
static void __exit ds3232_exit(void)
|
||||
{
|
||||
i2c_del_driver(&ds3232_driver);
|
||||
}
|
||||
|
||||
module_init(ds3232_init);
|
||||
module_exit(ds3232_exit);
|
||||
|
||||
MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>");
|
||||
MODULE_DESCRIPTION("Maxim/Dallas DS3232 RTC Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Загрузка…
Ссылка в новой задаче