microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

MIPS: Netlogic: PIC freq calculation for XLP 9XX/2XX 

Update PIC frequency calculation for XLP9XX and 2XX processors using
the correct PLL registers. This should work for all possible board
configurations.

Signed-off-by: Ganesan Ramalingam <ganesanr@broadcom.com>
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6876/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ganesan Ramalingam 2014-04-29 20:07:51 +05:30 коммит произвёл Ralf Baechle
Родитель 77bef0e4b5
Коммит c065909e47
4 изменённых файлов: 114 добавлений и 34 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
arch/mips/include/asm/netlogic/xlp-hal/iomap.h
Просмотреть файл

@ -120,6 +120,8 @@
#define XLP9XX_IO_UART_OFFSET(node) XLP9XX_HDR_OFFSET(node, 2, 2)
#define XLP9XX_IO_SYS_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 0)
#define XLP9XX_IO_FUSE_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 1)
#define XLP9XX_IO_CLOCK_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 2)
#define XLP9XX_IO_POWER_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 3)
#define XLP9XX_IO_JTAG_OFFSET(node) XLP9XX_HDR_OFFSET(node, 6, 4)
#define XLP9XX_IO_PCIE_OFFSET(node, i) XLP9XX_HDR_OFFSET(node, 1, i)

27
arch/mips/include/asm/netlogic/xlp-hal/sys.h
Просмотреть файл

@ -147,6 +147,28 @@
#define SYS_SYS_PLL_MEM_REQ 0x2a3
#define SYS_PLL_MEM_STAT 0x2a4
/* PLL registers XLP9XX */
#define SYS_9XX_DMC_PLL_CTRL0 0x140
#define SYS_9XX_DMC_PLL_CTRL1 0x141
#define SYS_9XX_DMC_PLL_CTRL2 0x142
#define SYS_9XX_DMC_PLL_CTRL3 0x143
#define SYS_9XX_PLL_CTRL0 0x144
#define SYS_9XX_PLL_CTRL1 0x145
#define SYS_9XX_PLL_CTRL2 0x146
#define SYS_9XX_PLL_CTRL3 0x147
#define SYS_9XX_PLL_CTRL0_DEVX(x) (0x148 + (x) * 4)
#define SYS_9XX_PLL_CTRL1_DEVX(x) (0x149 + (x) * 4)
#define SYS_9XX_PLL_CTRL2_DEVX(x) (0x14a + (x) * 4)
#define SYS_9XX_PLL_CTRL3_DEVX(x) (0x14b + (x) * 4)
#define SYS_9XX_CPU_PLL_CHG_CTRL 0x188
#define SYS_9XX_PLL_CHG_CTRL 0x189
#define SYS_9XX_CLK_DEV_DIS 0x18a
#define SYS_9XX_CLK_DEV_SEL 0x18b
#define SYS_9XX_CLK_DEV_DIV 0x18d
#define SYS_9XX_CLK_DEV_CHG 0x18f
/* Registers changed on 9XX */
#define SYS_9XX_POWER_ON_RESET_CFG 0x00
#define SYS_9XX_CHIP_RESET 0x01
@ -170,6 +192,11 @@
#define nlm_get_fuse_regbase(node) \
(nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
#define nlm_get_clock_pcibase(node) \
nlm_pcicfg_base(XLP9XX_IO_CLOCK_OFFSET(node))
#define nlm_get_clock_regbase(node) \
(nlm_get_clock_pcibase(node) + XLP_IO_PCI_HDRSZ)
unsigned int nlm_get_pic_frequency(int node);
#endif
#endif

5
arch/mips/netlogic/common/time.c
Просмотреть файл

@ -82,6 +82,7 @@ static struct clocksource csrc_pic = {
static void nlm_init_pic_timer(void)
{
uint64_t picbase = nlm_get_node(0)->picbase;
u32 picfreq;
nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
if (current_cpu_data.cputype == CPU_XLR) {
@ -92,7 +93,9 @@ static void nlm_init_pic_timer(void)
csrc_pic.read = nlm_get_pic_timer;
}
csrc_pic.rating = 1000;
clocksource_register_hz(&csrc_pic, pic_timer_freq());
picfreq = pic_timer_freq();
clocksource_register_hz(&csrc_pic, picfreq);
pr_info("PIC clock source added, frequency %d\n", picfreq);
}
void __init plat_time_init(void)

114
arch/mips/netlogic/xlp/nlm_hal.c
Просмотреть файл

@ -234,21 +234,28 @@ unsigned int nlm_get_core_frequency(int node, int core)
return (unsigned int)num;
}
/* Calculate Frequency to the PIC from PLL.
* freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
* ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
/*
* Calculate PIC frequency from PLL registers.
* freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /
* ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
*/
static unsigned int nlm_2xx_get_pic_frequency(int node)
static unsigned int nlm_xlp2_get_pic_frequency(int node)
{
u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx;
u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;
u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk;
sysbase = nlm_get_node(node)->sysbase;
clockbase = nlm_get_clock_regbase(node);
cpu_xlp9xx = cpu_is_xlp9xx();
/* Find ref_clk_base */
ref_clk_select =
(nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
if (cpu_xlp9xx)
ref_clk_select = (nlm_read_sys_reg(sysbase,
SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3;
else
ref_clk_select = (nlm_read_sys_reg(sysbase,
SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
switch (ref_clk_select) {
case 0:
ref_clk = 200000000ULL;
@ -269,30 +276,70 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
}
/* Find the clock source PLL device for PIC */
reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
switch (reg_select) {
case 0:
ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
break;
case 1:
ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
break;
case 2:
ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
break;
case 3:
ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
break;
if (cpu_xlp9xx) {
reg_select = nlm_read_sys_reg(clockbase,
SYS_9XX_CLK_DEV_SEL) & 0x3;
switch (reg_select) {
case 0:
ctrl_val0 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL0);
ctrl_val2 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL2);
break;
case 1:
ctrl_val0 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL0_DEVX(0));
ctrl_val2 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL2_DEVX(0));
break;
case 2:
ctrl_val0 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL0_DEVX(1));
ctrl_val2 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL2_DEVX(1));
break;
case 3:
ctrl_val0 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL0_DEVX(2));
ctrl_val2 = nlm_read_sys_reg(clockbase,
SYS_9XX_PLL_CTRL2_DEVX(2));
break;
}
} else {
reg_select = (nlm_read_sys_reg(sysbase,
SYS_CLK_DEV_SEL) >> 22) & 0x3;
switch (reg_select) {
case 0:
ctrl_val0 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL0);
ctrl_val2 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL2);
break;
case 1:
ctrl_val0 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL0_DEVX(0));
ctrl_val2 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL2_DEVX(0));
break;
case 2:
ctrl_val0 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL0_DEVX(1));
ctrl_val2 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL2_DEVX(1));
break;
case 3:
ctrl_val0 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL0_DEVX(2));
ctrl_val2 = nlm_read_sys_reg(sysbase,
SYS_PLL_CTRL2_DEVX(2));
break;
}
}
vco_post_div = (ctrl_val0 >> 5) & 0x7;
pll_post_div = (ctrl_val0 >> 24) & 0x7;
mdiv = ctrl_val2 & 0xff;
fdiv = (ctrl_val2 >> 8) & 0xfff;
fdiv = (ctrl_val2 >> 8) & 0x1fff;
/* Find PLL post divider value */
switch (pll_post_div) {
@ -322,7 +369,12 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
do_div(pll_out_freq_num, pll_out_freq_den);
/* PIC post divider, which happens after PLL */
pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
if (cpu_xlp9xx)
pic_div = nlm_read_sys_reg(clockbase,
SYS_9XX_CLK_DEV_DIV) & 0x3;
else
pic_div = (nlm_read_sys_reg(sysbase,
SYS_CLK_DEV_DIV) >> 22) & 0x3;
do_div(pll_out_freq_num, 1 << pic_div);
return pll_out_freq_num;
@ -330,12 +382,8 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
unsigned int nlm_get_pic_frequency(int node)
{
/* TODO Has to calculate freq as like 2xx */
if (cpu_is_xlp9xx())
return 250000000;
if (cpu_is_xlpii())
return nlm_2xx_get_pic_frequency(node);
return nlm_xlp2_get_pic_frequency(node);
else
return 133333333;
}