Input: edt-ft5x06 - adjust delays to conform datasheet

The FT5x06 datasheet specifies a minimum reset width of 5ms and a
delay between deassertion of reset and start of reporting of 300ms.
Adjust the delays to conform to the datasheet.

With the original delays I sometimes experienced communication
timeouts when initializing the controller.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Lothar Waßmann 2014-03-28 09:27:50 -07:00 коммит произвёл Dmitry Torokhov
Родитель dac90dc232
Коммит c080846749
1 изменённых файлов: 3 добавлений и 3 удалений

Просмотреть файл

@ -635,7 +635,7 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
return error;
}
mdelay(5);
msleep(5);
gpio_set_value(tsdata->wake_pin, 1);
}
if (gpio_is_valid(tsdata->reset_pin)) {
@ -650,9 +650,9 @@ static int edt_ft5x06_ts_reset(struct i2c_client *client,
return error;
}
mdelay(50);
msleep(5);
gpio_set_value(tsdata->reset_pin, 1);
mdelay(100);
msleep(300);
}
return 0;