diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 33c353bc1c4a..b34441bf8929 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -996,7 +996,6 @@ struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
 	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
 };
 
-/* Use the AB8500 init settings for AB8505 as they are the same right now */
 struct ab8500_regulator_platform_data ab8505_regulator_plat_data = {
 	.reg_init               = ab8505_reg_init,
 	.num_reg_init           = ARRAY_SIZE(ab8505_reg_init),
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 0ef38775a0c1..43be3e0d4e30 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -52,11 +52,13 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
+	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA |
 				MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_MMC_HIGHSPEED,
+				MMC_CAP_MMC_HIGHSPEED |
+				MMC_CAP_ERASE |
+				MMC_CAP_UHS_SDR12 |
+				MMC_CAP_UHS_SDR25,
 	.gpio_wp	= -1,
 	.sigdir		= MCI_ST_FBCLKEN |
 				MCI_ST_CMDDIREN |
@@ -106,8 +108,9 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 
 struct mmci_platform_data mop500_sdi1_data = {
 	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_NONREMOVABLE,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
 #ifdef CONFIG_STE_DMA40
@@ -143,9 +146,13 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 
 struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_MMC_HIGHSPEED,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_8_BIT_DATA |
+				MMC_CAP_NONREMOVABLE |
+				MMC_CAP_MMC_HIGHSPEED |
+				MMC_CAP_ERASE |
+				MMC_CAP_CMD23,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
 #ifdef CONFIG_STE_DMA40
@@ -180,10 +187,13 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi4_data = {
-	.ocr_mask	= MMC_VDD_29_30,
-	.f_max		= 50000000,
-	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_MMC_HIGHSPEED,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_8_BIT_DATA |
+				MMC_CAP_NONREMOVABLE |
+				MMC_CAP_MMC_HIGHSPEED |
+				MMC_CAP_ERASE |
+				MMC_CAP_CMD23,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
 #ifdef CONFIG_STE_DMA40
diff --git a/arch/arm/mach-ux500/db8500-regs.h b/arch/arm/mach-ux500/db8500-regs.h
index b2d7a0b98629..27399553c841 100644
--- a/arch/arm/mach-ux500/db8500-regs.h
+++ b/arch/arm/mach-ux500/db8500-regs.h
@@ -102,7 +102,6 @@
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
 #define U9540_DMC1_BASE		(U8500_PER4_BASE + 0x0A000)
 #define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x68000)
-#define U9540_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x6A000)
 #define U8500_PRCMU_TCPM_BASE   (U8500_PER4_BASE + 0x60000)
 #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
 #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
@@ -184,7 +183,7 @@
 #define U8500_IO_VIRTUAL	0xf0000000
 #define U8500_IO_PHYSICAL	0xa0000000
 /* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM		0xf0000000
+#define UX500_VIRT_ROM		IOMEM(0xf0000000)
 
 /* This macro is used in assembly, so no cast */
 #define IO_ADDRESS(x)           \
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 1cf94ce0feec..ddbdcda8306a 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -227,7 +227,7 @@ static struct resource db8500_prcmu_res[] = {
 	{
 		.name  = "prcmu-tcpm",
 		.start = U8500_PRCMU_TCPM_BASE,
-		.end   = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
+		.end   = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
 		.flags = IORESOURCE_MEM,
 	},
 };
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index 0d33d1a06955..392f2fdb37d0 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -21,11 +21,11 @@
 
 struct dbx500_asic_id dbx500_id;
 
-static unsigned int ux500_read_asicid(phys_addr_t addr)
+static unsigned int __init ux500_read_asicid(phys_addr_t addr)
 {
 	phys_addr_t base = addr & ~0xfff;
 	struct map_desc desc = {
-		.virtual	= UX500_VIRT_ROM,
+		.virtual	= (unsigned long)UX500_VIRT_ROM,
 		.pfn		= __phys_to_pfn(base),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
@@ -37,7 +37,7 @@ static unsigned int ux500_read_asicid(phys_addr_t addr)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	return readl(IOMEM(UX500_VIRT_ROM + (addr & 0xfff)));
+	return readl(UX500_VIRT_ROM + (addr & 0xfff));
 }
 
 static void ux500_print_soc_info(unsigned int asicid)