diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 11f5727ea445..42e4ee37ca1f 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -23,7 +23,9 @@ #include #ifdef CONFIG_ARCH_MX3 -# include +#include +#include +#include #endif #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index de026654b00e..0b06941b6139 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,360 +1,45 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_MXC_MX31_H__ -#define __ASM_ARCH_MXC_MX31_H__ - -#ifndef __ASM_ARCH_MXC_HARDWARE_H__ -#error "Do not include directly." -#endif - -/* - * MX31 memory map: - * - * Virt Phys Size What - * --------------------------------------------------------------------------- - * F8000000 1FFC0000 16K IRAM - * F9000000 30000000 256M L2CC - * FC000000 43F00000 1M AIPS 1 - * FC100000 50000000 1M SPBA - * FC200000 53F00000 1M AIPS 2 - * FC500000 60000000 128M ROMPATCH - * FC400000 68000000 128M AVIC - * 70000000 256M IPU (MAX M2) - * 80000000 256M CSD0 SDRAM/DDR - * 90000000 256M CSD1 SDRAM/DDR - * A0000000 128M CS0 Flash - * A8000000 128M CS1 Flash - * B0000000 32M CS2 - * B2000000 32M CS3 - * F4000000 B4000000 32M CS4 - * B6000000 32M CS5 - * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers - * C0000000 64M PCMCIA/CF - */ - -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - /* * IRAM */ -#define IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ -#define IRAM_BASE_ADDR_VIRT 0xF8000000 -#define IRAM_SIZE SZ_16K +#define MX31_IRAM_BASE_ADDR 0x1FFC0000 /* internal ram */ +#define MX31_IRAM_SIZE SZ_16K -/* - * L2CC - */ -#define L2CC_BASE_ADDR 0x30000000 -#define L2CC_BASE_ADDR_VIRT 0xF9000000 -#define L2CC_SIZE SZ_1M - -/* - * AIPS 1 - */ -#define AIPS1_BASE_ADDR 0x43F00000 -#define AIPS1_BASE_ADDR_VIRT 0xFC000000 -#define AIPS1_SIZE SZ_1M - -#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) -#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) -#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) -#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) -#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) -#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) -#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) -#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) #define OTG_BASE_ADDR (AIPS1_BASE_ADDR + 0x00088000) #define ATA_BASE_ADDR (AIPS1_BASE_ADDR + 0x0008C000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) -#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) -#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) -#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) -#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) -#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) -#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) #define UART4_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) #define UART5_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) -#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) - -/* - * SPBA global module enabled #0 - */ -#define SPBA0_BASE_ADDR 0x50000000 -#define SPBA0_BASE_ADDR_VIRT 0xFC100000 -#define SPBA0_SIZE SZ_1M #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) -#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) -#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) #define SIM1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00018000) #define IIM_BASE_ADDR (SPBA0_BASE_ADDR + 0x0001C000) -#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) -#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define MSHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) -#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) -/* - * AIPS 2 - */ -#define AIPS2_BASE_ADDR 0x53F00000 -#define AIPS2_BASE_ADDR_VIRT 0xFC200000 -#define AIPS2_SIZE SZ_1M -#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) #define CSPI3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000) #define FIRI_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008C000) -#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) -#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) -#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) -#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) -#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) #define SCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AE000) #define SMN_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AF000) -#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) -#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) -#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) #define MPEG4_ENC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C8000) -#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) -#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) -#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) -#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) -#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) -#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) -#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) -/* - * ROMP and AVIC - */ -#define ROMP_BASE_ADDR 0x60000000 -#define ROMP_BASE_ADDR_VIRT 0xFC500000 -#define ROMP_SIZE SZ_1M +#define MX31_NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define AVIC_BASE_ADDR 0x68000000 -#define AVIC_BASE_ADDR_VIRT 0xFC400000 -#define AVIC_SIZE SZ_1M - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define X_MEMC_BASE_ADDR 0xB8000000 -#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 -#define X_MEMC_SIZE SZ_64K - -#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x0000) -#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) -#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) -#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) -#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) -#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR - -/* - * Memory regions and CS - */ -#define IPU_MEM_BASE_ADDR 0x70000000 -#define CSD0_BASE_ADDR 0x80000000 -#define CSD1_BASE_ADDR 0x90000000 -#define CS0_BASE_ADDR 0xA0000000 -#define CS1_BASE_ADDR 0xA8000000 -#define CS2_BASE_ADDR 0xB0000000 -#define CS3_BASE_ADDR 0xB2000000 - -#define CS4_BASE_ADDR 0xB4000000 -#define CS4_BASE_ADDR_VIRT 0xF4000000 -#define CS4_SIZE SZ_32M - -#define CS5_BASE_ADDR 0xB6000000 -#define PCMCIA_MEM_BASE_ADDR 0xBC000000 - -/*! - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ -#define IO_ADDRESS(x) \ - (void __iomem *) \ - (((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\ - ((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\ - ((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ - ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ - ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ - ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ - ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ - ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ - ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ - -#define IRAM_IO_ADDRESS(x) \ - (((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT) - -#define L2CC_IO_ADDRESS(x) \ - (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) - -#define AIPS1_IO_ADDRESS(x) \ - (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) - -#define SPBA0_IO_ADDRESS(x) \ - (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) - -#define AIPS2_IO_ADDRESS(x) \ - (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) - -#define ROMP_IO_ADDRESS(x) \ - (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) - -#define AVIC_IO_ADDRESS(x) \ - (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) - -#define CS4_IO_ADDRESS(x) \ - (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) - -#define X_MEMC_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -#define PCMCIA_IO_ADDRESS(x) \ - (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) - -/* - * Interrupt numbers - */ -#define MXC_INT_PEN_ADS7843 0 -#define MXC_INT_RESV1 1 -#define MXC_INT_CS8900A 2 -#define MXC_INT_I2C3 3 -#define MXC_INT_I2C2 4 #define MXC_INT_MPEG4_ENCODER 5 -#define MXC_INT_RTIC 6 #define MXC_INT_FIRI 7 -#define MXC_INT_MMC_SDHC2 8 +#define MX31_INT_MMC_SDHC2 8 #define MXC_INT_MMC_SDHC1 9 -#define MXC_INT_I2C 10 -#define MXC_INT_SSI2 11 -#define MXC_INT_SSI1 12 -#define MXC_INT_CSPI2 13 -#define MXC_INT_CSPI1 14 -#define MXC_INT_ATA 15 +#define MX31_INT_SSI2 11 +#define MX31_INT_SSI1 12 #define MXC_INT_MBX 16 #define MXC_INT_CSPI3 17 -#define MXC_INT_UART3 18 -#define MXC_INT_IIM 19 #define MXC_INT_SIM2 20 #define MXC_INT_SIM1 21 -#define MXC_INT_RNGA 22 -#define MXC_INT_EVTMON 23 -#define MXC_INT_KPP 24 -#define MXC_INT_RTC 25 -#define MXC_INT_PWM 26 -#define MXC_INT_EPIT2 27 -#define MXC_INT_EPIT1 28 -#define MXC_INT_GPT 29 -#define MXC_INT_RESV30 30 -#define MXC_INT_RESV31 31 -#define MXC_INT_UART2 32 -#define MXC_INT_NANDFC 33 -#define MXC_INT_SDMA 34 +#define MXC_INT_CCM_DVFS 31 #define MXC_INT_USB1 35 #define MXC_INT_USB2 36 #define MXC_INT_USB3 37 #define MXC_INT_USB4 38 -#define MXC_INT_MSHC1 39 #define MXC_INT_MSHC2 40 -#define MXC_INT_IPU_ERR 41 -#define MXC_INT_IPU_SYN 42 -#define MXC_INT_RESV43 43 -#define MXC_INT_RESV44 44 -#define MXC_INT_UART1 45 #define MXC_INT_UART4 46 #define MXC_INT_UART5 47 -#define MXC_INT_ECT 48 -#define MXC_INT_SCC_SCM 49 -#define MXC_INT_SCC_SMN 50 -#define MXC_INT_GPIO2 51 -#define MXC_INT_GPIO1 52 #define MXC_INT_CCM 53 #define MXC_INT_PCMCIA 54 -#define MXC_INT_WDOG 55 -#define MXC_INT_GPIO3 56 -#define MXC_INT_RESV57 57 -#define MXC_INT_EXT_POWER 58 -#define MXC_INT_EXT_TEMPER 59 -#define MXC_INT_EXT_SENSOR60 60 -#define MXC_INT_EXT_SENSOR61 61 -#define MXC_INT_EXT_WDOG 62 -#define MXC_INT_EXT_TV 63 -#define PROD_SIGNATURE 0x1 /* For MX31 */ - -/* silicon revisions specific to i.MX31 */ -#define CHIP_REV_1_0 0x10 -#define CHIP_REV_1_1 0x11 -#define CHIP_REV_1_2 0x12 -#define CHIP_REV_1_3 0x13 -#define CHIP_REV_2_0 0x20 -#define CHIP_REV_2_1 0x21 -#define CHIP_REV_2_2 0x22 -#define CHIP_REV_2_3 0x23 -#define CHIP_REV_3_0 0x30 -#define CHIP_REV_3_1 0x31 -#define CHIP_REV_3_2 0x32 - -#define SYSTEM_REV_MIN CHIP_REV_1_0 -#define SYSTEM_REV_NUM 3 - -/* gpio and gpio based interrupt handling */ -#define GPIO_DR 0x00 -#define GPIO_GDIR 0x04 -#define GPIO_PSR 0x08 -#define GPIO_ICR1 0x0C -#define GPIO_ICR2 0x10 -#define GPIO_IMR 0x14 -#define GPIO_ISR 0x18 -#define GPIO_INT_LOW_LEV 0x0 -#define GPIO_INT_HIGH_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_FALL_EDGE 0x3 -#define GPIO_INT_NONE 0x4 - -/* Mandatory defines used globally */ - -/* this CPU supports up to 96 GPIOs */ -#define ARCH_NR_GPIOS 96 - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - -/* this is a i.MX31 CPU */ -#define cpu_is_mx31() (1) - -extern unsigned int system_rev; - -static inline int mx31_revision(void) -{ - return system_rev; -} -#endif - -#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h new file mode 100644 index 000000000000..6465fefb42e3 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -0,0 +1,29 @@ +/* + * IRAM + */ +#define MX35_IRAM_BASE_ADDR 0x10000000 /* internal ram */ +#define MX35_IRAM_SIZE SZ_128K + +#define MXC_FEC_BASE_ADDR 0x50038000 +#define MX35_NFC_BASE_ADDR 0xBB000000 + +/* + * Interrupt numbers + */ +#define MXC_INT_OWIRE 2 +#define MX35_INT_MMC_SDHC1 7 +#define MXC_INT_MMC_SDHC2 8 +#define MXC_INT_MMC_SDHC3 9 +#define MX35_INT_SSI1 11 +#define MX35_INT_SSI2 12 +#define MXC_INT_GPU2D 16 +#define MXC_INT_ASRC 17 +#define MXC_INT_USBHS 35 +#define MXC_INT_USBOTG 37 +#define MXC_INT_ESAI 40 +#define MXC_INT_CAN1 43 +#define MXC_INT_CAN2 44 +#define MXC_INT_MLB 46 +#define MXC_INT_SPDIF 47 +#define MXC_INT_FEC 57 + diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h new file mode 100644 index 000000000000..83a172b51b05 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -0,0 +1,290 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_MX31_H__ +#define __ASM_ARCH_MXC_MX31_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* + * MX31 memory map: + * + * Virt Phys Size What + * --------------------------------------------------------------------------- + * FC000000 43F00000 1M AIPS 1 + * FC100000 50000000 1M SPBA + * FC200000 53F00000 1M AIPS 2 + * FC500000 60000000 128M ROMPATCH + * FC400000 68000000 128M AVIC + * 70000000 256M IPU (MAX M2) + * 80000000 256M CSD0 SDRAM/DDR + * 90000000 256M CSD1 SDRAM/DDR + * A0000000 128M CS0 Flash + * A8000000 128M CS1 Flash + * B0000000 32M CS2 + * B2000000 32M CS3 + * F4000000 B4000000 32M CS4 + * B6000000 32M CS5 + * FC320000 B8000000 64K NAND, SDRAM, WEIM, M3IF, EMI controllers + * C0000000 64M PCMCIA/CF + */ + +#define CS0_BASE_ADDR 0xA0000000 +#define CS1_BASE_ADDR 0xA8000000 +#define CS2_BASE_ADDR 0xB0000000 +#define CS3_BASE_ADDR 0xB2000000 + +#define CS4_BASE_ADDR 0xB4000000 +#define CS4_BASE_ADDR_VIRT 0xF4000000 +#define CS4_SIZE SZ_32M + +#define CS5_BASE_ADDR 0xB6000000 +#define PCMCIA_MEM_BASE_ADDR 0xBC000000 + +/* + * L2CC + */ +#define L2CC_BASE_ADDR 0x30000000 +#define L2CC_SIZE SZ_1M + +/* + * AIPS 1 + */ +#define AIPS1_BASE_ADDR 0x43F00000 +#define AIPS1_BASE_ADDR_VIRT 0xFC000000 +#define AIPS1_SIZE SZ_1M + +#define MAX_BASE_ADDR (AIPS1_BASE_ADDR + 0x00004000) +#define EVTMON_BASE_ADDR (AIPS1_BASE_ADDR + 0x00008000) +#define CLKCTL_BASE_ADDR (AIPS1_BASE_ADDR + 0x0000C000) +#define ETB_SLOT4_BASE_ADDR (AIPS1_BASE_ADDR + 0x00010000) +#define ETB_SLOT5_BASE_ADDR (AIPS1_BASE_ADDR + 0x00014000) +#define ECT_CTIO_BASE_ADDR (AIPS1_BASE_ADDR + 0x00018000) +#define I2C_BASE_ADDR (AIPS1_BASE_ADDR + 0x00080000) +#define I2C3_BASE_ADDR (AIPS1_BASE_ADDR + 0x00084000) +#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x00090000) +#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00094000) +#define I2C2_BASE_ADDR (AIPS1_BASE_ADDR + 0x00098000) +#define OWIRE_BASE_ADDR (AIPS1_BASE_ADDR + 0x0009C000) +#define SSI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A0000) +#define CSPI1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A4000) +#define KPP_BASE_ADDR (AIPS1_BASE_ADDR + 0x000A8000) +#define IOMUXC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000AC000) +#define ECT_IP1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) +#define ECT_IP2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) + +/* + * SPBA global module enabled #0 + */ +#define SPBA0_BASE_ADDR 0x50000000 +#define SPBA0_BASE_ADDR_VIRT 0xFC100000 +#define SPBA0_SIZE SZ_1M + +#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define CSPI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) +#define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) +#define ATA_DMA_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) +#define MSHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00024000) +#define SPBA_CTRL_BASE_ADDR (SPBA0_BASE_ADDR + 0x0003C000) + +/* + * AIPS 2 + */ +#define AIPS2_BASE_ADDR 0x53F00000 +#define AIPS2_BASE_ADDR_VIRT 0xFC200000 +#define AIPS2_SIZE SZ_1M +#define CCM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000) +#define GPT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00090000) +#define EPIT1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000) +#define EPIT2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000) +#define GPIO3_BASE_ADDR (AIPS2_BASE_ADDR + 0x000A4000) +#define SCC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000AC000) +#define RNGA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000B0000) +#define IPU_CTRL_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C0000) +#define AUDMUX_BASE_ADDR (AIPS2_BASE_ADDR + 0x000C4000) +#define GPIO1_BASE_ADDR (AIPS2_BASE_ADDR + 0x000CC000) +#define GPIO2_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D0000) +#define SDMA_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D4000) +#define RTC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000D8000) +#define WDOG_BASE_ADDR (AIPS2_BASE_ADDR + 0x000DC000) +#define PWM_BASE_ADDR (AIPS2_BASE_ADDR + 0x000E0000) +#define RTIC_BASE_ADDR (AIPS2_BASE_ADDR + 0x000EC000) + +/* + * ROMP and AVIC + */ +#define ROMP_BASE_ADDR 0x60000000 +#define ROMP_BASE_ADDR_VIRT 0xFC500000 +#define ROMP_SIZE SZ_1M + +#define AVIC_BASE_ADDR 0x68000000 +#define AVIC_BASE_ADDR_VIRT 0xFC400000 +#define AVIC_SIZE SZ_1M + +/* + * NAND, SDRAM, WEIM, M3IF, EMI controllers + */ +#define X_MEMC_BASE_ADDR 0xB8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xFC320000 +#define X_MEMC_SIZE SZ_64K + +#define ESDCTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define EMI_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) +#define PCMCIA_CTL_BASE_ADDR EMI_CTL_BASE_ADDR + +/* + * Memory regions and CS + */ +#define IPU_MEM_BASE_ADDR 0x70000000 +#define CSD0_BASE_ADDR 0x80000000 +#define CSD1_BASE_ADDR 0x90000000 + +/*! + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (void __iomem *) \ + (((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\ + ((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\ + ((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\ + ((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\ + ((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\ + ((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\ + 0xDEADBEEF) + +/* + * define the address mapping macros: in physical address order + */ +#define L2CC_IO_ADDRESS(x) \ + (((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT) + +#define AIPS1_IO_ADDRESS(x) \ + (((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT) + +#define SPBA0_IO_ADDRESS(x) \ + (((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT) + +#define AIPS2_IO_ADDRESS(x) \ + (((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT) + +#define ROMP_IO_ADDRESS(x) \ + (((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) \ + (((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* + * Interrupt numbers + */ +#define MXC_INT_I2C3 3 +#define MXC_INT_I2C2 4 +#define MXC_INT_RTIC 6 +#define MXC_INT_I2C 10 +#define MXC_INT_CSPI2 13 +#define MXC_INT_CSPI1 14 +#define MXC_INT_ATA 15 +#define MXC_INT_UART3 18 +#define MXC_INT_IIM 19 +#define MXC_INT_RNGA 22 +#define MXC_INT_EVTMON 23 +#define MXC_INT_KPP 24 +#define MXC_INT_RTC 25 +#define MXC_INT_PWM 26 +#define MXC_INT_EPIT2 27 +#define MXC_INT_EPIT1 28 +#define MXC_INT_GPT 29 +#define MXC_INT_POWER_FAIL 30 +#define MXC_INT_UART2 32 +#define MXC_INT_NANDFC 33 +#define MXC_INT_SDMA 34 +#define MXC_INT_MSHC1 39 +#define MXC_INT_IPU_ERR 41 +#define MXC_INT_IPU_SYN 42 +#define MXC_INT_UART1 45 +#define MXC_INT_ECT 48 +#define MXC_INT_SCC_SCM 49 +#define MXC_INT_SCC_SMN 50 +#define MXC_INT_GPIO2 51 +#define MXC_INT_GPIO1 52 +#define MXC_INT_WDOG 55 +#define MXC_INT_GPIO3 56 +#define MXC_INT_EXT_POWER 58 +#define MXC_INT_EXT_TEMPER 59 +#define MXC_INT_EXT_SENSOR60 60 +#define MXC_INT_EXT_SENSOR61 61 +#define MXC_INT_EXT_WDOG 62 +#define MXC_INT_EXT_TV 63 + +#define PROD_SIGNATURE 0x1 /* For MX31 */ + +/* silicon revisions specific to i.MX31 */ +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_3 0x13 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 +#define CHIP_REV_2_2 0x22 +#define CHIP_REV_2_3 0x23 +#define CHIP_REV_3_0 0x30 +#define CHIP_REV_3_1 0x31 +#define CHIP_REV_3_2 0x32 + +#define SYSTEM_REV_MIN CHIP_REV_1_0 +#define SYSTEM_REV_NUM 3 + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x00 +#define GPIO_GDIR 0x04 +#define GPIO_PSR 0x08 +#define GPIO_ICR1 0x0C +#define GPIO_ICR2 0x10 +#define GPIO_IMR 0x14 +#define GPIO_ISR 0x18 +#define GPIO_INT_LOW_LEV 0x0 +#define GPIO_INT_HIGH_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_FALL_EDGE 0x3 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this CPU supports up to 96 GPIOs */ +#define ARCH_NR_GPIOS 96 + +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +extern unsigned int system_rev; + +static inline int mx31_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ +