microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: davinci: da8xx: Remove legacy USB and SATA clock init 

This removes the unused legacy USB and SATA clock init code from
arch/arm/mach-davinci/{devices,usb}-da8xx}.c.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This commit is contained in:
David Lechner 2018-05-18 11:48:24 -05:00 коммит произвёл Sekhar Nori
Родитель cf0a51b4f0
Коммит c0c3fb1a15
3 изменённых файлов: 0 добавлений и 270 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

29
arch/arm/mach-davinci/devices-da8xx.c
Просмотреть файл

@ -30,11 +30,6 @@
#include "cpuidle.h" #include "cpuidle.h"
#include "sram.h" #include "sram.h"
#ifndef CONFIG_COMMON_CLK
#include <mach/clock.h>
#include "clock.h"
#endif
#define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPCC_BASE 0x01c00000
#define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC0_BASE 0x01c08000
#define DA8XX_TPTC1_BASE 0x01c08400 #define DA8XX_TPTC1_BASE 0x01c08400
@ -1045,29 +1040,6 @@ int __init da8xx_register_spi_bus(int instance, unsigned num_chipselect)
} }
#ifdef CONFIG_ARCH_DAVINCI_DA850 #ifdef CONFIG_ARCH_DAVINCI_DA850
#ifndef CONFIG_COMMON_CLK
static struct clk sata_refclk = {
.name = "sata_refclk",
.set_rate = davinci_simple_set_rate,
};
static struct clk_lookup sata_refclk_lookup =
CLK("ahci_da850", "refclk", &sata_refclk);
int __init da850_register_sata_refclk(int rate)
{
int ret;
sata_refclk.rate = rate;
ret = clk_register(&sata_refclk);
if (ret)
return ret;
clkdev_add(&sata_refclk_lookup);
return 0;
}
#else
int __init da850_register_sata_refclk(int rate) int __init da850_register_sata_refclk(int rate)
{ {
struct clk *clk; struct clk *clk;
@ -1078,7 +1050,6 @@ int __init da850_register_sata_refclk(int rate)
return clk_register_clkdev(clk, "refclk", "ahci_da850"); return clk_register_clkdev(clk, "refclk", "ahci_da850");
} }
#endif
static struct resource da850_sata_resources[] = { static struct resource da850_sata_resources[] = {
{ {

3
arch/arm/mach-davinci/include/mach/da8xx.h
Просмотреть файл

@ -103,9 +103,6 @@ int da8xx_register_watchdog(void);
int da8xx_register_usb_phy(void); int da8xx_register_usb_phy(void);
int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb20(unsigned mA, unsigned potpgt);
int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_usb_refclkin(int rate);
int da8xx_register_usb20_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb11_phy_clk(bool use_usb_refclkin);
int da8xx_register_usb_phy_clocks(void); int da8xx_register_usb_phy_clocks(void);
int da850_register_sata_refclk(int rate); int da850_register_sata_refclk(int rate);
int da8xx_register_emac(void); int da8xx_register_emac(void);

238
arch/arm/mach-davinci/usb-da8xx.c
Просмотреть файл

@ -20,11 +20,6 @@
#include <mach/da8xx.h> #include <mach/da8xx.h>
#include <mach/irqs.h> #include <mach/irqs.h>
#ifndef CONFIG_COMMON_CLK
#include <mach/clock.h>
#include "clock.h"
#endif
#define DA8XX_USB0_BASE 0x01e00000 #define DA8XX_USB0_BASE 0x01e00000
#define DA8XX_USB1_BASE 0x01e25000 #define DA8XX_USB1_BASE 0x01e25000
@ -87,11 +82,6 @@ static struct platform_device da8xx_usb20_dev = {
.name = "musb-da8xx", .name = "musb-da8xx",
.id = -1, .id = -1,
.dev = { .dev = {
/*
* Setting init_name so that clock lookup will work in
* usb20_phy_clk_enable() even if this device is not registered.
*/
.init_name = "musb-da8xx",
.platform_data = &usb_data, .platform_data = &usb_data,
.dma_mask = &usb_dmamask, .dma_mask = &usb_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32), .coherent_dma_mask = DMA_BIT_MASK(32),
@ -140,234 +130,6 @@ int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
return platform_device_register(&da8xx_usb11_device); return platform_device_register(&da8xx_usb11_device);
} }
#ifndef CONFIG_COMMON_CLK
static struct clk usb_refclkin = {
.name = "usb_refclkin",
.set_rate = davinci_simple_set_rate,
};
static struct clk_lookup usb_refclkin_lookup =
CLK(NULL, "usb_refclkin", &usb_refclkin);
/**
* da8xx_register_usb_refclkin - register USB_REFCLKIN clock
*
* @rate: The clock rate in Hz
*
* This clock is only needed if the board provides an external USB_REFCLKIN
* signal, in which case it will be used as the parent of usb20_phy_clk and/or
* usb11_phy_clk.
*/
int __init da8xx_register_usb_refclkin(int rate)
{
int ret;
usb_refclkin.rate = rate;
ret = clk_register(&usb_refclkin);
if (ret)
return ret;
clkdev_add(&usb_refclkin_lookup);
return 0;
}
static void usb20_phy_clk_enable(struct clk *clk)
{
u32 val;
u32 timeout = 500000; /* 500 msec */
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
davinci_clk_enable(usb20_clk);
/*
* Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
* host may use the PLL clock without USB 2.0 OTG being used.
*/
val &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
val |= CFGCHIP2_PHY_PLLON;
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
while (--timeout) {
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
if (val & CFGCHIP2_PHYCLKGD)
goto done;
udelay(1);
}
pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
done:
davinci_clk_disable(usb20_clk);
}
static void usb20_phy_clk_disable(struct clk *clk)
{
u32 val;
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
val |= CFGCHIP2_PHYPWRDN;
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
}
static int usb20_phy_clk_set_parent(struct clk *clk, struct clk *parent)
{
u32 val;
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* Set the mux depending on the parent clock. */
if (parent == &usb_refclkin) {
val &= ~CFGCHIP2_USB2PHYCLKMUX;
} else if (strcmp(parent->name, "pll0_aux_clk") == 0) {
val |= CFGCHIP2_USB2PHYCLKMUX;
} else {
pr_err("Bad parent on USB 2.0 PHY clock\n");
return -EINVAL;
}
/* reference frequency also comes from parent clock */
val &= ~CFGCHIP2_REFFREQ_MASK;
switch (clk_get_rate(parent)) {
case 12000000:
val |= CFGCHIP2_REFFREQ_12MHZ;
break;
case 13000000:
val |= CFGCHIP2_REFFREQ_13MHZ;
break;
case 19200000:
val |= CFGCHIP2_REFFREQ_19_2MHZ;
break;
case 20000000:
val |= CFGCHIP2_REFFREQ_20MHZ;
break;
case 24000000:
val |= CFGCHIP2_REFFREQ_24MHZ;
break;
case 26000000:
val |= CFGCHIP2_REFFREQ_26MHZ;
break;
case 38400000:
val |= CFGCHIP2_REFFREQ_38_4MHZ;
break;
case 40000000:
val |= CFGCHIP2_REFFREQ_40MHZ;
break;
case 48000000:
val |= CFGCHIP2_REFFREQ_48MHZ;
break;
default:
pr_err("Bad parent clock rate on USB 2.0 PHY clock\n");
return -EINVAL;
}
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
return 0;
}
static struct clk usb20_phy_clk = {
.name = "usb0_clk48",
.clk_enable = usb20_phy_clk_enable,
.clk_disable = usb20_phy_clk_disable,
.set_parent = usb20_phy_clk_set_parent,
};
static struct clk_lookup usb20_phy_clk_lookup =
CLK("da8xx-usb-phy", "usb0_clk48", &usb20_phy_clk);
/**
* da8xx_register_usb20_phy_clk - register USB0PHYCLKMUX clock
*
* @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
* or "pll0_aux" if false.
*/
int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
{
struct clk *parent;
int ret;
usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
ret = PTR_ERR_OR_ZERO(usb20_clk);
if (ret)
return ret;
parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
ret = PTR_ERR_OR_ZERO(parent);
if (ret) {
clk_put(usb20_clk);
return ret;
}
usb20_phy_clk.parent = parent;
ret = clk_register(&usb20_phy_clk);
if (!ret)
clkdev_add(&usb20_phy_clk_lookup);
clk_put(parent);
return ret;
}
static int usb11_phy_clk_set_parent(struct clk *clk, struct clk *parent)
{
u32 val;
val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
/* Set the USB 1.1 PHY clock mux based on the parent clock. */
if (parent == &usb20_phy_clk) {
val &= ~CFGCHIP2_USB1PHYCLKMUX;
} else if (parent == &usb_refclkin) {
val |= CFGCHIP2_USB1PHYCLKMUX;
} else {
pr_err("Bad parent on USB 1.1 PHY clock\n");
return -EINVAL;
}
writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
return 0;
}
static struct clk usb11_phy_clk = {
.name = "usb1_clk48",
.set_parent = usb11_phy_clk_set_parent,
};
static struct clk_lookup usb11_phy_clk_lookup =
CLK("da8xx-usb-phy", "usb1_clk48", &usb11_phy_clk);
/**
* da8xx_register_usb11_phy_clk - register USB1PHYCLKMUX clock
*
* @use_usb_refclkin: Selects the parent clock - either "usb_refclkin" if true
* or "usb0_clk48" if false.
*/
int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin)
{
struct clk *parent;
int ret = 0;
if (use_usb_refclkin)
parent = clk_get(NULL, "usb_refclkin");
else
parent = clk_get(&da8xx_usb_phy.dev, "usb0_clk48");
if (IS_ERR(parent))
return PTR_ERR(parent);
usb11_phy_clk.parent = parent;
ret = clk_register(&usb11_phy_clk);
if (!ret)
clkdev_add(&usb11_phy_clk_lookup);
clk_put(parent);
return ret;
}
#endif
static struct platform_device da8xx_usb_phy_clks_device = { static struct platform_device da8xx_usb_phy_clks_device = {
.name = "da830-usb-phy-clks", .name = "da830-usb-phy-clks",
.id = -1, .id = -1,