Merge branches 'pci/host', 'pci/host-designware', 'pci/host-hisi', 'pci/host-qcom' and 'pci/host-rcar' into next
* pci/host: PCI: host: Add of_pci_get_host_bridge_resources() stub PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD * pci/host-designware: PCI: designware: Make config accessor override checking symmetric PCI: designware: Simplify control flow * pci/host-hisi: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers * pci/host-qcom: ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: qcom: Add Qualcomm PCIe controller driver PCI: qcom: Document PCIe devicetree bindings PCI: designware: Ensure ATU is enabled before IO/conf space accesses * pci/host-rcar: PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
This commit is contained in:
Коммит
c111e8bf6e
|
@ -1,4 +1,4 @@
|
|||
HiSilicon PCIe host bridge DT description
|
||||
HiSilicon Hip05 and Hip06 PCIe host bridge DT description
|
||||
|
||||
HiSilicon PCIe host controller is based on Designware PCI core.
|
||||
It shares common functions with PCIe Designware core driver and inherits
|
||||
|
@ -7,8 +7,8 @@ Documentation/devicetree/bindings/pci/designware-pci.txt.
|
|||
|
||||
Additional properties are described here:
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain "hisilicon,hip05-pcie".
|
||||
Required properties
|
||||
- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
|
||||
- reg: Should contain rc_dbi, config registers location and length.
|
||||
- reg-names: Must include the following entries:
|
||||
"rc_dbi": controller configuration registers;
|
||||
|
@ -20,7 +20,7 @@ Optional properties:
|
|||
- status: Either "ok" or "disabled".
|
||||
- dma-coherent: Present if DMA operations are coherent.
|
||||
|
||||
Example:
|
||||
Hip05 Example (note that Hip06 is the same except compatible):
|
||||
pcie@0xb0080000 {
|
||||
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
|
||||
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
|
||||
|
|
|
@ -0,0 +1,233 @@
|
|||
* Qualcomm PCI express root complex
|
||||
|
||||
- compatible:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Value should contain
|
||||
- "qcom,pcie-ipq8064" for ipq8064
|
||||
- "qcom,pcie-apq8064" for apq8064
|
||||
- "qcom,pcie-apq8084" for apq8084
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Register ranges as listed in the reg-names property
|
||||
|
||||
- reg-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Must include the following entries
|
||||
- "parf" Qualcomm specific registers
|
||||
- "dbi" Designware PCIe registers
|
||||
- "elbi" External local bus interface registers
|
||||
- "config" PCIe configuration space
|
||||
|
||||
- device_type:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Should be "pci". As specified in designware-pcie.txt
|
||||
|
||||
- #address-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 3. As specified in designware-pcie.txt
|
||||
|
||||
- #size-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 2. As specified in designware-pcie.txt
|
||||
|
||||
- ranges:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
|
||||
- interrupts:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: MSI interrupt
|
||||
|
||||
- interrupt-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "msi"
|
||||
|
||||
- #interrupt-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 1. As specified in designware-pcie.txt
|
||||
|
||||
- interrupt-map-mask:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
|
||||
- interrupt-map:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
|
||||
- clocks:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: List of phandle and clock specifier pairs as listed
|
||||
in clock-names property
|
||||
|
||||
- clock-names:
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain the following entries
|
||||
- "iface" Configuration AHB clock
|
||||
|
||||
- clock-names:
|
||||
Usage: required for ipq/apq8064
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain the following entries
|
||||
- "core" Clocks the pcie hw block
|
||||
- "phy" Clocks the pcie PHY block
|
||||
- clock-names:
|
||||
Usage: required for apq8084
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain the following entries
|
||||
- "aux" Auxiliary (AUX) clock
|
||||
- "bus_master" Master AXI clock
|
||||
- "bus_slave" Slave AXI clock
|
||||
- resets:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: List of phandle and reset specifier pairs as listed
|
||||
in reset-names property
|
||||
|
||||
- reset-names:
|
||||
Usage: required for ipq/apq8064
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain the following entries
|
||||
- "axi" AXI reset
|
||||
- "ahb" AHB reset
|
||||
- "por" POR reset
|
||||
- "pci" PCI reset
|
||||
- "phy" PHY reset
|
||||
|
||||
- reset-names:
|
||||
Usage: required for apq8084
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain the following entries
|
||||
- "core" Core reset
|
||||
|
||||
- power-domains:
|
||||
Usage: required for apq8084
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A phandle and power domain specifier pair to the
|
||||
power domain which is responsible for collapsing
|
||||
and restoring power to the peripheral
|
||||
|
||||
- vdda-supply:
|
||||
Usage: required
|
||||
Value type: <phandle>
|
||||
Definition: A phandle to the core analog power supply
|
||||
|
||||
- vdda_phy-supply:
|
||||
Usage: required for ipq/apq8064
|
||||
Value type: <phandle>
|
||||
Definition: A phandle to the analog power supply for PHY
|
||||
|
||||
- vdda_refclk-supply:
|
||||
Usage: required for ipq/apq8064
|
||||
Value type: <phandle>
|
||||
Definition: A phandle to the analog power supply for IC which generates
|
||||
reference clock
|
||||
|
||||
- phys:
|
||||
Usage: required for apq8084
|
||||
Value type: <phandle>
|
||||
Definition: List of phandle(s) as listed in phy-names property
|
||||
|
||||
- phy-names:
|
||||
Usage: required for apq8084
|
||||
Value type: <stringlist>
|
||||
Definition: Should contain "pciephy"
|
||||
|
||||
- <name>-gpios:
|
||||
Usage: optional
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: List of phandle and gpio specifier pairs. Should contain
|
||||
- "perst-gpios" PCIe endpoint reset signal line
|
||||
- "wake-gpios" PCIe endpoint wake signal line
|
||||
|
||||
* Example for ipq/apq8064
|
||||
pcie@1b500000 {
|
||||
compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
|
||||
reg = <0x1b500000 0x1000
|
||||
0x1b502000 0x80
|
||||
0x1b600000 0x100
|
||||
0x0ff00000 0x100000>;
|
||||
reg-names = "dbi", "elbi", "parf", "config";
|
||||
device_type = "pci";
|
||||
linux,pci-domain = <0>;
|
||||
bus-range = <0x00 0xff>;
|
||||
num-lanes = <1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
||||
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
clocks = <&gcc PCIE_A_CLK>,
|
||||
<&gcc PCIE_H_CLK>,
|
||||
<&gcc PCIE_PHY_CLK>;
|
||||
clock-names = "core", "iface", "phy";
|
||||
resets = <&gcc PCIE_ACLK_RESET>,
|
||||
<&gcc PCIE_HCLK_RESET>,
|
||||
<&gcc PCIE_POR_RESET>,
|
||||
<&gcc PCIE_PCI_RESET>,
|
||||
<&gcc PCIE_PHY_RESET>;
|
||||
reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
pinctrl-0 = <&pcie_pins_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
* Example for apq8084
|
||||
pcie0@fc520000 {
|
||||
compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
|
||||
reg = <0xfc520000 0x2000>,
|
||||
<0xff000000 0x1000>,
|
||||
<0xff001000 0x1000>,
|
||||
<0xff002000 0x2000>;
|
||||
reg-names = "parf", "dbi", "elbi", "config";
|
||||
device_type = "pci";
|
||||
linux,pci-domain = <0>;
|
||||
bus-range = <0x00 0xff>;
|
||||
num-lanes = <1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
|
||||
0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
|
||||
interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
|
||||
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
|
||||
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
|
||||
<&gcc GCC_PCIE_0_AUX_CLK>;
|
||||
clock-names = "iface", "master_bus", "slave_bus", "aux";
|
||||
resets = <&gcc GCC_PCIE_0_BCR>;
|
||||
reset-names = "core";
|
||||
power-domains = <&gcc PCIE0_GDSC>;
|
||||
vdda-supply = <&pma8084_l3>;
|
||||
phys = <&pciephy0>;
|
||||
phy-names = "pciephy";
|
||||
perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pcie0_pins_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
|
@ -8240,11 +8240,19 @@ F: drivers/pci/host/pci-xgene-msi.c
|
|||
|
||||
PCIE DRIVER FOR HISILICON
|
||||
M: Zhou Wang <wangzhou1@hisilicon.com>
|
||||
M: Gabriele Paoloni <gabriele.paoloni@huawei.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
|
||||
F: drivers/pci/host/pcie-hisi.c
|
||||
|
||||
PCIE DRIVER FOR QUALCOMM MSM
|
||||
M: Stanimir Varbanov <svarbanov@mm-sol.com>
|
||||
L: linux-pci@vger.kernel.org
|
||||
L: linux-arm-msm@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/pci/host/*qcom*
|
||||
|
||||
PCMCIA SUBSYSTEM
|
||||
P: Linux PCMCIA Team
|
||||
L: linux-pcmcia@lists.infradead.org
|
||||
|
|
|
@ -47,6 +47,18 @@
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pcie_pins: pcie_pinmux {
|
||||
mux {
|
||||
pins = "gpio27";
|
||||
function = "gpio";
|
||||
};
|
||||
conf {
|
||||
pins = "gpio27";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
|
@ -123,6 +135,10 @@
|
|||
pm8921_lvs1: lvs1 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
lvs6 {
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -231,6 +247,16 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
pci@1b500000 {
|
||||
status = "ok";
|
||||
vdda-supply = <&pm8921_s3>;
|
||||
vdda_phy-supply = <&pm8921_lvs6>;
|
||||
vdda_refclk-supply = <&ext_3p3v>;
|
||||
pinctrl-0 = <&pcie_pins>;
|
||||
pinctrl-names = "default";
|
||||
perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
qcom,ssbi@500000 {
|
||||
pmic@0 {
|
||||
gpio@150 {
|
||||
|
|
|
@ -659,5 +659,41 @@
|
|||
compatible = "qcom,tcsr-apq8064", "syscon";
|
||||
reg = <0x1a400000 0x100>;
|
||||
};
|
||||
|
||||
pcie: pci@1b500000 {
|
||||
compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
|
||||
reg = <0x1b500000 0x1000
|
||||
0x1b502000 0x80
|
||||
0x1b600000 0x100
|
||||
0x0ff00000 0x100000>;
|
||||
reg-names = "dbi", "elbi", "parf", "config";
|
||||
device_type = "pci";
|
||||
linux,pci-domain = <0>;
|
||||
bus-range = <0x00 0xff>;
|
||||
num-lanes = <1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
||||
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
|
||||
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
||||
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
||||
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
||||
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
||||
clocks = <&gcc PCIE_A_CLK>,
|
||||
<&gcc PCIE_H_CLK>,
|
||||
<&gcc PCIE_PHY_REF_CLK>;
|
||||
clock-names = "core", "iface", "phy";
|
||||
resets = <&gcc PCIE_ACLK_RESET>,
|
||||
<&gcc PCIE_HCLK_RESET>,
|
||||
<&gcc PCIE_POR_RESET>,
|
||||
<&gcc PCIE_PCI_RESET>,
|
||||
<&gcc PCIE_PHY_RESET>;
|
||||
reset-names = "axi", "ahb", "por", "pci", "phy";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
@ -173,10 +173,21 @@ config PCIE_ALTERA_MSI
|
|||
|
||||
config PCI_HISI
|
||||
depends on OF && ARM64
|
||||
bool "HiSilicon SoC HIP05 PCIe controller"
|
||||
bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
|
||||
select PCIEPORTBUS
|
||||
select PCIE_DW
|
||||
help
|
||||
Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
|
||||
Say Y here if you want PCIe controller support on HiSilicon
|
||||
Hip05 and Hip06 SoCs
|
||||
|
||||
config PCIE_QCOM
|
||||
bool "Qualcomm PCIe controller"
|
||||
depends on ARCH_QCOM && OF
|
||||
select PCIE_DW
|
||||
select PCIEPORTBUS
|
||||
help
|
||||
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
|
||||
PCIe controller uses the Designware core plus Qualcomm-specific
|
||||
hardware wrappers.
|
||||
|
||||
endmenu
|
||||
|
|
|
@ -21,3 +21,4 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
|
|||
obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
|
||||
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
|
||||
obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
|
||||
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
|
||||
|
|
|
@ -302,7 +302,8 @@ static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
|
|||
}
|
||||
|
||||
ret = devm_request_irq(&pdev->dev, pp->irq,
|
||||
dra7xx_pcie_msi_irq_handler, IRQF_SHARED,
|
||||
dra7xx_pcie_msi_irq_handler,
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
"dra7-pcie-msi", pp);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to request irq\n");
|
||||
|
|
|
@ -522,7 +522,8 @@ static int __init exynos_add_pcie_port(struct pcie_port *pp,
|
|||
|
||||
ret = devm_request_irq(&pdev->dev, pp->msi_irq,
|
||||
exynos_pcie_msi_irq_handler,
|
||||
IRQF_SHARED, "exynos-pcie", pp);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
"exynos-pcie", pp);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to request msi irq\n");
|
||||
return ret;
|
||||
|
|
|
@ -537,7 +537,8 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp,
|
|||
|
||||
ret = devm_request_irq(&pdev->dev, pp->msi_irq,
|
||||
imx6_pcie_msi_handler,
|
||||
IRQF_SHARED, "mx6-pcie-msi", pp);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
"mx6-pcie-msi", pp);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "failed to request MSI irq\n");
|
||||
return ret;
|
||||
|
|
|
@ -1288,7 +1288,7 @@ static int tegra_pcie_enable_msi(struct tegra_pcie *pcie)
|
|||
|
||||
msi->irq = err;
|
||||
|
||||
err = request_irq(msi->irq, tegra_pcie_msi_irq, 0,
|
||||
err = request_irq(msi->irq, tegra_pcie_msi_irq, IRQF_NO_THREAD,
|
||||
tegra_msi_irq_chip.name, pcie);
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
|
||||
|
|
|
@ -128,32 +128,26 @@ static inline void dw_pcie_writel_rc(struct pcie_port *pp, u32 val, u32 reg)
|
|||
static int dw_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
|
||||
u32 *val)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (pp->ops->rd_own_conf)
|
||||
ret = pp->ops->rd_own_conf(pp, where, size, val);
|
||||
else
|
||||
ret = dw_pcie_cfg_read(pp->dbi_base + where, size, val);
|
||||
return pp->ops->rd_own_conf(pp, where, size, val);
|
||||
|
||||
return ret;
|
||||
return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
|
||||
}
|
||||
|
||||
static int dw_pcie_wr_own_conf(struct pcie_port *pp, int where, int size,
|
||||
u32 val)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (pp->ops->wr_own_conf)
|
||||
ret = pp->ops->wr_own_conf(pp, where, size, val);
|
||||
else
|
||||
ret = dw_pcie_cfg_write(pp->dbi_base + where, size, val);
|
||||
return pp->ops->wr_own_conf(pp, where, size, val);
|
||||
|
||||
return ret;
|
||||
return dw_pcie_cfg_write(pp->dbi_base + where, size, val);
|
||||
}
|
||||
|
||||
static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
|
||||
int type, u64 cpu_addr, u64 pci_addr, u32 size)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | index,
|
||||
PCIE_ATU_VIEWPORT);
|
||||
dw_pcie_writel_rc(pp, lower_32_bits(cpu_addr), PCIE_ATU_LOWER_BASE);
|
||||
|
@ -164,6 +158,12 @@ static void dw_pcie_prog_outbound_atu(struct pcie_port *pp, int index,
|
|||
dw_pcie_writel_rc(pp, upper_32_bits(pci_addr), PCIE_ATU_UPPER_TARGET);
|
||||
dw_pcie_writel_rc(pp, type, PCIE_ATU_CR1);
|
||||
dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
|
||||
|
||||
/*
|
||||
* Make sure ATU enable takes effect before any subsequent config
|
||||
* and I/O accesses.
|
||||
*/
|
||||
dw_pcie_readl_rc(pp, PCIE_ATU_CR2, &val);
|
||||
}
|
||||
|
||||
static struct irq_chip dw_msi_irq_chip = {
|
||||
|
@ -384,8 +384,8 @@ int dw_pcie_link_up(struct pcie_port *pp)
|
|||
{
|
||||
if (pp->ops->link_up)
|
||||
return pp->ops->link_up(pp);
|
||||
else
|
||||
return 0;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
|
||||
|
@ -572,6 +572,9 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|||
u64 cpu_addr;
|
||||
void __iomem *va_cfg_base;
|
||||
|
||||
if (pp->ops->rd_other_conf)
|
||||
return pp->ops->rd_other_conf(pp, bus, devfn, where, size, val);
|
||||
|
||||
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
||||
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
||||
|
||||
|
@ -606,6 +609,9 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
|
|||
u64 cpu_addr;
|
||||
void __iomem *va_cfg_base;
|
||||
|
||||
if (pp->ops->wr_other_conf)
|
||||
return pp->ops->wr_other_conf(pp, bus, devfn, where, size, val);
|
||||
|
||||
busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
|
||||
PCIE_ATU_FUNC(PCI_FUNC(devfn));
|
||||
|
||||
|
@ -659,46 +665,30 @@ static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
|
|||
int size, u32 *val)
|
||||
{
|
||||
struct pcie_port *pp = bus->sysdata;
|
||||
int ret;
|
||||
|
||||
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
|
||||
*val = 0xffffffff;
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
}
|
||||
|
||||
if (bus->number != pp->root_bus_nr)
|
||||
if (pp->ops->rd_other_conf)
|
||||
ret = pp->ops->rd_other_conf(pp, bus, devfn,
|
||||
where, size, val);
|
||||
else
|
||||
ret = dw_pcie_rd_other_conf(pp, bus, devfn,
|
||||
where, size, val);
|
||||
else
|
||||
ret = dw_pcie_rd_own_conf(pp, where, size, val);
|
||||
if (bus->number == pp->root_bus_nr)
|
||||
return dw_pcie_rd_own_conf(pp, where, size, val);
|
||||
|
||||
return ret;
|
||||
return dw_pcie_rd_other_conf(pp, bus, devfn, where, size, val);
|
||||
}
|
||||
|
||||
static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
||||
int where, int size, u32 val)
|
||||
{
|
||||
struct pcie_port *pp = bus->sysdata;
|
||||
int ret;
|
||||
|
||||
if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
|
||||
return PCIBIOS_DEVICE_NOT_FOUND;
|
||||
|
||||
if (bus->number != pp->root_bus_nr)
|
||||
if (pp->ops->wr_other_conf)
|
||||
ret = pp->ops->wr_other_conf(pp, bus, devfn,
|
||||
where, size, val);
|
||||
else
|
||||
ret = dw_pcie_wr_other_conf(pp, bus, devfn,
|
||||
where, size, val);
|
||||
else
|
||||
ret = dw_pcie_wr_own_conf(pp, where, size, val);
|
||||
if (bus->number == pp->root_bus_nr)
|
||||
return dw_pcie_wr_own_conf(pp, where, size, val);
|
||||
|
||||
return ret;
|
||||
return dw_pcie_wr_other_conf(pp, bus, devfn, where, size, val);
|
||||
}
|
||||
|
||||
static struct pci_ops dw_pcie_ops = {
|
||||
|
|
|
@ -1,10 +1,11 @@
|
|||
/*
|
||||
* PCIe host controller driver for HiSilicon Hip05 SoC
|
||||
* PCIe host controller driver for HiSilicon SoCs
|
||||
*
|
||||
* Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com
|
||||
*
|
||||
* Author: Zhou Wang <wangzhou1@hisilicon.com>
|
||||
* Dacai Zhu <zhudacai@hisilicon.com>
|
||||
* Authors: Zhou Wang <wangzhou1@hisilicon.com>
|
||||
* Dacai Zhu <zhudacai@hisilicon.com>
|
||||
* Gabriele Paoloni <gabriele.paoloni@huawei.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
|
@ -16,21 +17,31 @@
|
|||
#include <linux/of_address.h>
|
||||
#include <linux/of_pci.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include "pcie-designware.h"
|
||||
|
||||
#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818
|
||||
#define PCIE_LTSSM_LINKUP_STATE 0x11
|
||||
#define PCIE_LTSSM_STATE_MASK 0x3F
|
||||
#define PCIE_LTSSM_LINKUP_STATE 0x11
|
||||
#define PCIE_LTSSM_STATE_MASK 0x3F
|
||||
#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818
|
||||
#define PCIE_SYS_STATE4 0x31c
|
||||
#define PCIE_HIP06_CTRL_OFF 0x1000
|
||||
|
||||
#define to_hisi_pcie(x) container_of(x, struct hisi_pcie, pp)
|
||||
|
||||
struct hisi_pcie;
|
||||
|
||||
struct pcie_soc_ops {
|
||||
int (*hisi_pcie_link_up)(struct hisi_pcie *pcie);
|
||||
};
|
||||
|
||||
struct hisi_pcie {
|
||||
struct regmap *subctrl;
|
||||
void __iomem *reg_base;
|
||||
u32 port_id;
|
||||
struct pcie_port pp;
|
||||
struct pcie_soc_ops *soc_ops;
|
||||
};
|
||||
|
||||
static inline void hisi_pcie_apb_writel(struct hisi_pcie *pcie,
|
||||
|
@ -44,7 +55,7 @@ static inline u32 hisi_pcie_apb_readl(struct hisi_pcie *pcie, u32 reg)
|
|||
return readl(pcie->reg_base + reg);
|
||||
}
|
||||
|
||||
/* Hip05 PCIe host only supports 32-bit config access */
|
||||
/* HipXX PCIe host only supports 32-bit config access */
|
||||
static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size,
|
||||
u32 *val)
|
||||
{
|
||||
|
@ -67,7 +78,7 @@ static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size,
|
|||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
/* Hip05 PCIe host only supports 32-bit config access */
|
||||
/* HipXX PCIe host only supports 32-bit config access */
|
||||
static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size,
|
||||
u32 val)
|
||||
{
|
||||
|
@ -94,10 +105,9 @@ static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size,
|
|||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static int hisi_pcie_link_up(struct pcie_port *pp)
|
||||
static int hisi_pcie_link_up_hip05(struct hisi_pcie *hisi_pcie)
|
||||
{
|
||||
u32 val;
|
||||
struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
|
||||
|
||||
regmap_read(hisi_pcie->subctrl, PCIE_SUBCTRL_SYS_STATE4_REG +
|
||||
0x100 * hisi_pcie->port_id, &val);
|
||||
|
@ -105,6 +115,23 @@ static int hisi_pcie_link_up(struct pcie_port *pp)
|
|||
return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
|
||||
}
|
||||
|
||||
static int hisi_pcie_link_up_hip06(struct hisi_pcie *hisi_pcie)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
val = hisi_pcie_apb_readl(hisi_pcie, PCIE_HIP06_CTRL_OFF +
|
||||
PCIE_SYS_STATE4);
|
||||
|
||||
return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
|
||||
}
|
||||
|
||||
static int hisi_pcie_link_up(struct pcie_port *pp)
|
||||
{
|
||||
struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
|
||||
|
||||
return hisi_pcie->soc_ops->hisi_pcie_link_up(hisi_pcie);
|
||||
}
|
||||
|
||||
static struct pcie_host_ops hisi_pcie_host_ops = {
|
||||
.rd_own_conf = hisi_pcie_cfg_read,
|
||||
.wr_own_conf = hisi_pcie_cfg_write,
|
||||
|
@ -143,7 +170,9 @@ static int __init hisi_pcie_probe(struct platform_device *pdev)
|
|||
{
|
||||
struct hisi_pcie *hisi_pcie;
|
||||
struct pcie_port *pp;
|
||||
const struct of_device_id *match;
|
||||
struct resource *reg;
|
||||
struct device_driver *driver;
|
||||
int ret;
|
||||
|
||||
hisi_pcie = devm_kzalloc(&pdev->dev, sizeof(*hisi_pcie), GFP_KERNEL);
|
||||
|
@ -152,6 +181,10 @@ static int __init hisi_pcie_probe(struct platform_device *pdev)
|
|||
|
||||
pp = &hisi_pcie->pp;
|
||||
pp->dev = &pdev->dev;
|
||||
driver = (pdev->dev).driver;
|
||||
|
||||
match = of_match_device(driver->of_match_table, &pdev->dev);
|
||||
hisi_pcie->soc_ops = (struct pcie_soc_ops *) match->data;
|
||||
|
||||
hisi_pcie->subctrl =
|
||||
syscon_regmap_lookup_by_compatible("hisilicon,pcie-sas-subctrl");
|
||||
|
@ -180,11 +213,27 @@ static int __init hisi_pcie_probe(struct platform_device *pdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct pcie_soc_ops hip05_ops = {
|
||||
&hisi_pcie_link_up_hip05
|
||||
};
|
||||
|
||||
static struct pcie_soc_ops hip06_ops = {
|
||||
&hisi_pcie_link_up_hip06
|
||||
};
|
||||
|
||||
static const struct of_device_id hisi_pcie_of_match[] = {
|
||||
{.compatible = "hisilicon,hip05-pcie",},
|
||||
{
|
||||
.compatible = "hisilicon,hip05-pcie",
|
||||
.data = (void *) &hip05_ops,
|
||||
},
|
||||
{
|
||||
.compatible = "hisilicon,hip06-pcie",
|
||||
.data = (void *) &hip06_ops,
|
||||
},
|
||||
{},
|
||||
};
|
||||
|
||||
|
||||
MODULE_DEVICE_TABLE(of, hisi_pcie_of_match);
|
||||
|
||||
static struct platform_driver hisi_pcie_driver = {
|
||||
|
@ -196,3 +245,8 @@ static struct platform_driver hisi_pcie_driver = {
|
|||
};
|
||||
|
||||
module_platform_driver(hisi_pcie_driver);
|
||||
|
||||
MODULE_AUTHOR("Zhou Wang <wangzhou1@hisilicon.com>");
|
||||
MODULE_AUTHOR("Dacai Zhu <zhudacai@hisilicon.com>");
|
||||
MODULE_AUTHOR("Gabriele Paoloni <gabriele.paoloni@huawei.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
|
@ -0,0 +1,616 @@
|
|||
/*
|
||||
* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
|
||||
* Copyright 2015 Linaro Limited.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#include "pcie-designware.h"
|
||||
|
||||
#define PCIE20_PARF_PHY_CTRL 0x40
|
||||
#define PCIE20_PARF_PHY_REFCLK 0x4C
|
||||
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
||||
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
|
||||
#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
|
||||
|
||||
#define PCIE20_ELBI_SYS_CTRL 0x04
|
||||
#define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0)
|
||||
|
||||
#define PCIE20_CAP 0x70
|
||||
|
||||
#define PERST_DELAY_US 1000
|
||||
|
||||
struct qcom_pcie_resources_v0 {
|
||||
struct clk *iface_clk;
|
||||
struct clk *core_clk;
|
||||
struct clk *phy_clk;
|
||||
struct reset_control *pci_reset;
|
||||
struct reset_control *axi_reset;
|
||||
struct reset_control *ahb_reset;
|
||||
struct reset_control *por_reset;
|
||||
struct reset_control *phy_reset;
|
||||
struct regulator *vdda;
|
||||
struct regulator *vdda_phy;
|
||||
struct regulator *vdda_refclk;
|
||||
};
|
||||
|
||||
struct qcom_pcie_resources_v1 {
|
||||
struct clk *iface;
|
||||
struct clk *aux;
|
||||
struct clk *master_bus;
|
||||
struct clk *slave_bus;
|
||||
struct reset_control *core;
|
||||
struct regulator *vdda;
|
||||
};
|
||||
|
||||
union qcom_pcie_resources {
|
||||
struct qcom_pcie_resources_v0 v0;
|
||||
struct qcom_pcie_resources_v1 v1;
|
||||
};
|
||||
|
||||
struct qcom_pcie;
|
||||
|
||||
struct qcom_pcie_ops {
|
||||
int (*get_resources)(struct qcom_pcie *pcie);
|
||||
int (*init)(struct qcom_pcie *pcie);
|
||||
void (*deinit)(struct qcom_pcie *pcie);
|
||||
};
|
||||
|
||||
struct qcom_pcie {
|
||||
struct pcie_port pp;
|
||||
struct device *dev;
|
||||
union qcom_pcie_resources res;
|
||||
void __iomem *parf;
|
||||
void __iomem *dbi;
|
||||
void __iomem *elbi;
|
||||
struct phy *phy;
|
||||
struct gpio_desc *reset;
|
||||
struct qcom_pcie_ops *ops;
|
||||
};
|
||||
|
||||
#define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
|
||||
|
||||
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
||||
{
|
||||
gpiod_set_value(pcie->reset, 1);
|
||||
usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
|
||||
}
|
||||
|
||||
static void qcom_ep_reset_deassert(struct qcom_pcie *pcie)
|
||||
{
|
||||
gpiod_set_value(pcie->reset, 0);
|
||||
usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
|
||||
}
|
||||
|
||||
static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg)
|
||||
{
|
||||
struct pcie_port *pp = arg;
|
||||
|
||||
return dw_handle_msi_irq(pp);
|
||||
}
|
||||
|
||||
static int qcom_pcie_establish_link(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct device *dev = pcie->dev;
|
||||
unsigned int retries = 0;
|
||||
u32 val;
|
||||
|
||||
if (dw_pcie_link_up(&pcie->pp))
|
||||
return 0;
|
||||
|
||||
/* enable link training */
|
||||
val = readl(pcie->elbi + PCIE20_ELBI_SYS_CTRL);
|
||||
val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE;
|
||||
writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
|
||||
|
||||
do {
|
||||
if (dw_pcie_link_up(&pcie->pp))
|
||||
return 0;
|
||||
usleep_range(250, 1000);
|
||||
} while (retries < 200);
|
||||
|
||||
dev_warn(dev, "phy link never came up\n");
|
||||
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
struct device *dev = pcie->dev;
|
||||
|
||||
res->vdda = devm_regulator_get(dev, "vdda");
|
||||
if (IS_ERR(res->vdda))
|
||||
return PTR_ERR(res->vdda);
|
||||
|
||||
res->vdda_phy = devm_regulator_get(dev, "vdda_phy");
|
||||
if (IS_ERR(res->vdda_phy))
|
||||
return PTR_ERR(res->vdda_phy);
|
||||
|
||||
res->vdda_refclk = devm_regulator_get(dev, "vdda_refclk");
|
||||
if (IS_ERR(res->vdda_refclk))
|
||||
return PTR_ERR(res->vdda_refclk);
|
||||
|
||||
res->iface_clk = devm_clk_get(dev, "iface");
|
||||
if (IS_ERR(res->iface_clk))
|
||||
return PTR_ERR(res->iface_clk);
|
||||
|
||||
res->core_clk = devm_clk_get(dev, "core");
|
||||
if (IS_ERR(res->core_clk))
|
||||
return PTR_ERR(res->core_clk);
|
||||
|
||||
res->phy_clk = devm_clk_get(dev, "phy");
|
||||
if (IS_ERR(res->phy_clk))
|
||||
return PTR_ERR(res->phy_clk);
|
||||
|
||||
res->pci_reset = devm_reset_control_get(dev, "pci");
|
||||
if (IS_ERR(res->pci_reset))
|
||||
return PTR_ERR(res->pci_reset);
|
||||
|
||||
res->axi_reset = devm_reset_control_get(dev, "axi");
|
||||
if (IS_ERR(res->axi_reset))
|
||||
return PTR_ERR(res->axi_reset);
|
||||
|
||||
res->ahb_reset = devm_reset_control_get(dev, "ahb");
|
||||
if (IS_ERR(res->ahb_reset))
|
||||
return PTR_ERR(res->ahb_reset);
|
||||
|
||||
res->por_reset = devm_reset_control_get(dev, "por");
|
||||
if (IS_ERR(res->por_reset))
|
||||
return PTR_ERR(res->por_reset);
|
||||
|
||||
res->phy_reset = devm_reset_control_get(dev, "phy");
|
||||
if (IS_ERR(res->phy_reset))
|
||||
return PTR_ERR(res->phy_reset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qcom_pcie_get_resources_v1(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
struct device *dev = pcie->dev;
|
||||
|
||||
res->vdda = devm_regulator_get(dev, "vdda");
|
||||
if (IS_ERR(res->vdda))
|
||||
return PTR_ERR(res->vdda);
|
||||
|
||||
res->iface = devm_clk_get(dev, "iface");
|
||||
if (IS_ERR(res->iface))
|
||||
return PTR_ERR(res->iface);
|
||||
|
||||
res->aux = devm_clk_get(dev, "aux");
|
||||
if (IS_ERR(res->aux))
|
||||
return PTR_ERR(res->aux);
|
||||
|
||||
res->master_bus = devm_clk_get(dev, "master_bus");
|
||||
if (IS_ERR(res->master_bus))
|
||||
return PTR_ERR(res->master_bus);
|
||||
|
||||
res->slave_bus = devm_clk_get(dev, "slave_bus");
|
||||
if (IS_ERR(res->slave_bus))
|
||||
return PTR_ERR(res->slave_bus);
|
||||
|
||||
res->core = devm_reset_control_get(dev, "core");
|
||||
if (IS_ERR(res->core))
|
||||
return PTR_ERR(res->core);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void qcom_pcie_deinit_v0(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
|
||||
reset_control_assert(res->pci_reset);
|
||||
reset_control_assert(res->axi_reset);
|
||||
reset_control_assert(res->ahb_reset);
|
||||
reset_control_assert(res->por_reset);
|
||||
reset_control_assert(res->pci_reset);
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
regulator_disable(res->vdda);
|
||||
regulator_disable(res->vdda_phy);
|
||||
regulator_disable(res->vdda_refclk);
|
||||
}
|
||||
|
||||
static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
|
||||
struct device *dev = pcie->dev;
|
||||
u32 val;
|
||||
int ret;
|
||||
|
||||
ret = regulator_enable(res->vdda);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot enable vdda regulator\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regulator_enable(res->vdda_refclk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot enable vdda_refclk regulator\n");
|
||||
goto err_refclk;
|
||||
}
|
||||
|
||||
ret = regulator_enable(res->vdda_phy);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot enable vdda_phy regulator\n");
|
||||
goto err_vdda_phy;
|
||||
}
|
||||
|
||||
ret = reset_control_assert(res->ahb_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot assert ahb reset\n");
|
||||
goto err_assert_ahb;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->iface_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
goto err_assert_ahb;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->phy_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable phy clock\n");
|
||||
goto err_clk_phy;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->core_clk);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable core clock\n");
|
||||
goto err_clk_core;
|
||||
}
|
||||
|
||||
ret = reset_control_deassert(res->ahb_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert ahb reset\n");
|
||||
goto err_deassert_ahb;
|
||||
}
|
||||
|
||||
/* enable PCIe clocks and resets */
|
||||
val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
||||
val &= ~BIT(0);
|
||||
writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
||||
|
||||
/* enable external reference clock */
|
||||
val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
||||
val |= BIT(16);
|
||||
writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
||||
|
||||
ret = reset_control_deassert(res->phy_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert phy reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = reset_control_deassert(res->pci_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert pci reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = reset_control_deassert(res->por_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert por reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = reset_control_deassert(res->axi_reset);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert axi reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* wait for clock acquisition */
|
||||
usleep_range(1000, 1500);
|
||||
|
||||
return 0;
|
||||
|
||||
err_deassert_ahb:
|
||||
clk_disable_unprepare(res->core_clk);
|
||||
err_clk_core:
|
||||
clk_disable_unprepare(res->phy_clk);
|
||||
err_clk_phy:
|
||||
clk_disable_unprepare(res->iface_clk);
|
||||
err_assert_ahb:
|
||||
regulator_disable(res->vdda_phy);
|
||||
err_vdda_phy:
|
||||
regulator_disable(res->vdda_refclk);
|
||||
err_refclk:
|
||||
regulator_disable(res->vdda);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
|
||||
reset_control_assert(res->core);
|
||||
clk_disable_unprepare(res->slave_bus);
|
||||
clk_disable_unprepare(res->master_bus);
|
||||
clk_disable_unprepare(res->iface);
|
||||
clk_disable_unprepare(res->aux);
|
||||
regulator_disable(res->vdda);
|
||||
}
|
||||
|
||||
static int qcom_pcie_init_v1(struct qcom_pcie *pcie)
|
||||
{
|
||||
struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
|
||||
struct device *dev = pcie->dev;
|
||||
int ret;
|
||||
|
||||
ret = reset_control_deassert(res->core);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot deassert core reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->aux);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable aux clock\n");
|
||||
goto err_res;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->iface);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable iface clock\n");
|
||||
goto err_aux;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->master_bus);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable master_bus clock\n");
|
||||
goto err_iface;
|
||||
}
|
||||
|
||||
ret = clk_prepare_enable(res->slave_bus);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot prepare/enable slave_bus clock\n");
|
||||
goto err_master;
|
||||
}
|
||||
|
||||
ret = regulator_enable(res->vdda);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot enable vdda regulator\n");
|
||||
goto err_slave;
|
||||
}
|
||||
|
||||
/* change DBI base address */
|
||||
writel(0, pcie->parf + PCIE20_PARF_DBI_BASE_ADDR);
|
||||
|
||||
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
||||
u32 val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
||||
|
||||
val |= BIT(31);
|
||||
writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
|
||||
}
|
||||
|
||||
return 0;
|
||||
err_slave:
|
||||
clk_disable_unprepare(res->slave_bus);
|
||||
err_master:
|
||||
clk_disable_unprepare(res->master_bus);
|
||||
err_iface:
|
||||
clk_disable_unprepare(res->iface);
|
||||
err_aux:
|
||||
clk_disable_unprepare(res->aux);
|
||||
err_res:
|
||||
reset_control_assert(res->core);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int qcom_pcie_link_up(struct pcie_port *pp)
|
||||
{
|
||||
struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
u16 val = readw(pcie->dbi + PCIE20_CAP + PCI_EXP_LNKSTA);
|
||||
|
||||
return !!(val & PCI_EXP_LNKSTA_DLLLA);
|
||||
}
|
||||
|
||||
static void qcom_pcie_host_init(struct pcie_port *pp)
|
||||
{
|
||||
struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
||||
int ret;
|
||||
|
||||
qcom_ep_reset_assert(pcie);
|
||||
|
||||
ret = pcie->ops->init(pcie);
|
||||
if (ret)
|
||||
goto err_deinit;
|
||||
|
||||
ret = phy_power_on(pcie->phy);
|
||||
if (ret)
|
||||
goto err_deinit;
|
||||
|
||||
dw_pcie_setup_rc(pp);
|
||||
|
||||
if (IS_ENABLED(CONFIG_PCI_MSI))
|
||||
dw_pcie_msi_init(pp);
|
||||
|
||||
qcom_ep_reset_deassert(pcie);
|
||||
|
||||
ret = qcom_pcie_establish_link(pcie);
|
||||
if (ret)
|
||||
goto err;
|
||||
|
||||
return;
|
||||
err:
|
||||
qcom_ep_reset_assert(pcie);
|
||||
phy_power_off(pcie->phy);
|
||||
err_deinit:
|
||||
pcie->ops->deinit(pcie);
|
||||
}
|
||||
|
||||
static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
|
||||
u32 *val)
|
||||
{
|
||||
/* the device class is not reported correctly from the register */
|
||||
if (where == PCI_CLASS_REVISION && size == 4) {
|
||||
*val = readl(pp->dbi_base + PCI_CLASS_REVISION);
|
||||
*val &= 0xff; /* keep revision id */
|
||||
*val |= PCI_CLASS_BRIDGE_PCI << 16;
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
return dw_pcie_cfg_read(pp->dbi_base + where, size, val);
|
||||
}
|
||||
|
||||
static struct pcie_host_ops qcom_pcie_dw_ops = {
|
||||
.link_up = qcom_pcie_link_up,
|
||||
.host_init = qcom_pcie_host_init,
|
||||
.rd_own_conf = qcom_pcie_rd_own_conf,
|
||||
};
|
||||
|
||||
static const struct qcom_pcie_ops ops_v0 = {
|
||||
.get_resources = qcom_pcie_get_resources_v0,
|
||||
.init = qcom_pcie_init_v0,
|
||||
.deinit = qcom_pcie_deinit_v0,
|
||||
};
|
||||
|
||||
static const struct qcom_pcie_ops ops_v1 = {
|
||||
.get_resources = qcom_pcie_get_resources_v1,
|
||||
.init = qcom_pcie_init_v1,
|
||||
.deinit = qcom_pcie_deinit_v1,
|
||||
};
|
||||
|
||||
static int qcom_pcie_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *res;
|
||||
struct qcom_pcie *pcie;
|
||||
struct pcie_port *pp;
|
||||
int ret;
|
||||
|
||||
pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
|
||||
if (!pcie)
|
||||
return -ENOMEM;
|
||||
|
||||
pcie->ops = (struct qcom_pcie_ops *)of_device_get_match_data(dev);
|
||||
pcie->dev = dev;
|
||||
|
||||
pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(pcie->reset))
|
||||
return PTR_ERR(pcie->reset);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
|
||||
pcie->parf = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(pcie->parf))
|
||||
return PTR_ERR(pcie->parf);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
|
||||
pcie->dbi = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(pcie->dbi))
|
||||
return PTR_ERR(pcie->dbi);
|
||||
|
||||
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
|
||||
pcie->elbi = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(pcie->elbi))
|
||||
return PTR_ERR(pcie->elbi);
|
||||
|
||||
pcie->phy = devm_phy_optional_get(dev, "pciephy");
|
||||
if (IS_ERR(pcie->phy))
|
||||
return PTR_ERR(pcie->phy);
|
||||
|
||||
ret = pcie->ops->get_resources(pcie);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pp = &pcie->pp;
|
||||
pp->dev = dev;
|
||||
pp->dbi_base = pcie->dbi;
|
||||
pp->root_bus_nr = -1;
|
||||
pp->ops = &qcom_pcie_dw_ops;
|
||||
|
||||
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
||||
pp->msi_irq = platform_get_irq_byname(pdev, "msi");
|
||||
if (pp->msi_irq < 0)
|
||||
return pp->msi_irq;
|
||||
|
||||
ret = devm_request_irq(dev, pp->msi_irq,
|
||||
qcom_pcie_msi_irq_handler,
|
||||
IRQF_SHARED, "qcom-pcie-msi", pp);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot request msi irq\n");
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
ret = phy_init(pcie->phy);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = dw_pcie_host_init(pp);
|
||||
if (ret) {
|
||||
dev_err(dev, "cannot initialize host\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, pcie);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qcom_pcie_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct qcom_pcie *pcie = platform_get_drvdata(pdev);
|
||||
|
||||
qcom_ep_reset_assert(pcie);
|
||||
phy_power_off(pcie->phy);
|
||||
phy_exit(pcie->phy);
|
||||
pcie->ops->deinit(pcie);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id qcom_pcie_match[] = {
|
||||
{ .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 },
|
||||
{ .compatible = "qcom,pcie-apq8064", .data = &ops_v0 },
|
||||
{ .compatible = "qcom,pcie-apq8084", .data = &ops_v1 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, qcom_pcie_match);
|
||||
|
||||
static struct platform_driver qcom_pcie_driver = {
|
||||
.probe = qcom_pcie_probe,
|
||||
.remove = qcom_pcie_remove,
|
||||
.driver = {
|
||||
.name = "qcom-pcie",
|
||||
.of_match_table = qcom_pcie_match,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(qcom_pcie_driver);
|
||||
|
||||
MODULE_AUTHOR("Stanimir Varbanov <svarbanov@mm-sol.com>");
|
||||
MODULE_DESCRIPTION("Qualcomm PCIe root complex driver");
|
||||
MODULE_LICENSE("GPL v2");
|
|
@ -26,6 +26,7 @@
|
|||
#include <linux/of_platform.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define DRV_NAME "rcar-pcie"
|
||||
|
@ -94,6 +95,11 @@
|
|||
#define H1_PCIEPHYDOUTR 0x040014
|
||||
#define H1_PCIEPHYSR 0x040018
|
||||
|
||||
/* R-Car Gen2 PHY */
|
||||
#define GEN2_PCIEPHYADDR 0x780
|
||||
#define GEN2_PCIEPHYDATA 0x784
|
||||
#define GEN2_PCIEPHYCTRL 0x78c
|
||||
|
||||
#define INT_PCI_MSI_NR 32
|
||||
|
||||
#define RCONF(x) (PCICONF(0)+(x))
|
||||
|
@ -124,16 +130,7 @@ static inline struct rcar_msi *to_rcar_msi(struct msi_controller *chip)
|
|||
}
|
||||
|
||||
/* Structure representing the PCIe interface */
|
||||
/*
|
||||
* ARM pcibios functions expect the ARM struct pci_sys_data as the PCI
|
||||
* sysdata. Add pci_sys_data as the first element in struct gen_pci so
|
||||
* that when we use a gen_pci pointer as sysdata, it is also a pointer to
|
||||
* a struct pci_sys_data.
|
||||
*/
|
||||
struct rcar_pcie {
|
||||
#ifdef CONFIG_ARM
|
||||
struct pci_sys_data sys;
|
||||
#endif
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct list_head resources;
|
||||
|
@ -576,6 +573,26 @@ static int rcar_pcie_hw_init_h1(struct rcar_pcie *pcie)
|
|||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
static int rcar_pcie_hw_init_gen2(struct rcar_pcie *pcie)
|
||||
{
|
||||
/*
|
||||
* These settings come from the R-Car Series, 2nd Generation User's
|
||||
* Manual, section 50.3.1 (2) Initialization of the physical layer.
|
||||
*/
|
||||
rcar_pci_write_reg(pcie, 0x000f0030, GEN2_PCIEPHYADDR);
|
||||
rcar_pci_write_reg(pcie, 0x00381203, GEN2_PCIEPHYDATA);
|
||||
rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
|
||||
rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
|
||||
|
||||
rcar_pci_write_reg(pcie, 0x000f0054, GEN2_PCIEPHYADDR);
|
||||
/* The following value is for DC connection, no termination resistor */
|
||||
rcar_pci_write_reg(pcie, 0x13802007, GEN2_PCIEPHYDATA);
|
||||
rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL);
|
||||
rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL);
|
||||
|
||||
return rcar_pcie_hw_init(pcie);
|
||||
}
|
||||
|
||||
static int rcar_msi_alloc(struct rcar_msi *chip)
|
||||
{
|
||||
int msi;
|
||||
|
@ -718,14 +735,16 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
|
|||
|
||||
/* Two irqs are for MSI, but they are also used for non-MSI irqs */
|
||||
err = devm_request_irq(&pdev->dev, msi->irq1, rcar_pcie_msi_irq,
|
||||
IRQF_SHARED, rcar_msi_irq_chip.name, pcie);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
rcar_msi_irq_chip.name, pcie);
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
|
||||
goto err;
|
||||
}
|
||||
|
||||
err = devm_request_irq(&pdev->dev, msi->irq2, rcar_pcie_msi_irq,
|
||||
IRQF_SHARED, rcar_msi_irq_chip.name, pcie);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
rcar_msi_irq_chip.name, pcie);
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev, "failed to request IRQ: %d\n", err);
|
||||
goto err;
|
||||
|
@ -915,9 +934,9 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie,
|
|||
|
||||
static const struct of_device_id rcar_pcie_of_match[] = {
|
||||
{ .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 },
|
||||
{ .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init },
|
||||
{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init },
|
||||
{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
|
||||
{ .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init_gen2 },
|
||||
{ .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init_gen2 },
|
||||
{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init_gen2 },
|
||||
{ .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init },
|
||||
{},
|
||||
};
|
||||
|
@ -1003,32 +1022,51 @@ static int rcar_pcie_probe(struct platform_device *pdev)
|
|||
if (err)
|
||||
return err;
|
||||
|
||||
of_id = of_match_device(rcar_pcie_of_match, pcie->dev);
|
||||
if (!of_id || !of_id->data)
|
||||
return -EINVAL;
|
||||
hw_init_fn = of_id->data;
|
||||
|
||||
pm_runtime_enable(pcie->dev);
|
||||
err = pm_runtime_get_sync(pcie->dev);
|
||||
if (err < 0) {
|
||||
dev_err(pcie->dev, "pm_runtime_get_sync failed\n");
|
||||
goto err_pm_disable;
|
||||
}
|
||||
|
||||
/* Failure to get a link might just be that no cards are inserted */
|
||||
err = hw_init_fn(pcie);
|
||||
if (err) {
|
||||
dev_info(&pdev->dev, "PCIe link down\n");
|
||||
err = 0;
|
||||
goto err_pm_put;
|
||||
}
|
||||
|
||||
data = rcar_pci_read_reg(pcie, MACSR);
|
||||
dev_info(&pdev->dev, "PCIe x%d: link up\n", (data >> 20) & 0x3f);
|
||||
|
||||
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
||||
err = rcar_pcie_enable_msi(pcie);
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev,
|
||||
"failed to enable MSI support: %d\n",
|
||||
err);
|
||||
return err;
|
||||
goto err_pm_put;
|
||||
}
|
||||
}
|
||||
|
||||
of_id = of_match_device(rcar_pcie_of_match, pcie->dev);
|
||||
if (!of_id || !of_id->data)
|
||||
return -EINVAL;
|
||||
hw_init_fn = of_id->data;
|
||||
err = rcar_pcie_enable(pcie);
|
||||
if (err)
|
||||
goto err_pm_put;
|
||||
|
||||
/* Failure to get a link might just be that no cards are inserted */
|
||||
err = hw_init_fn(pcie);
|
||||
if (err) {
|
||||
dev_info(&pdev->dev, "PCIe link down\n");
|
||||
return 0;
|
||||
}
|
||||
return 0;
|
||||
|
||||
data = rcar_pci_read_reg(pcie, MACSR);
|
||||
dev_info(&pdev->dev, "PCIe x%d: link up\n", (data >> 20) & 0x3f);
|
||||
err_pm_put:
|
||||
pm_runtime_put(pcie->dev);
|
||||
|
||||
return rcar_pcie_enable(pcie);
|
||||
err_pm_disable:
|
||||
pm_runtime_disable(pcie->dev);
|
||||
return err;
|
||||
}
|
||||
|
||||
static struct platform_driver rcar_pcie_driver = {
|
||||
|
|
|
@ -279,7 +279,8 @@ static int spear13xx_add_pcie_port(struct pcie_port *pp,
|
|||
return -ENODEV;
|
||||
}
|
||||
ret = devm_request_irq(dev, pp->irq, spear13xx_pcie_irq_handler,
|
||||
IRQF_SHARED, "spear1340-pcie", pp);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
"spear1340-pcie", pp);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to request irq %d\n", pp->irq);
|
||||
return ret;
|
||||
|
|
|
@ -781,7 +781,8 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
|
|||
|
||||
port->irq = irq_of_parse_and_map(node, 0);
|
||||
err = devm_request_irq(dev, port->irq, xilinx_pcie_intr_handler,
|
||||
IRQF_SHARED, "xilinx-pcie", port);
|
||||
IRQF_SHARED | IRQF_NO_THREAD,
|
||||
"xilinx-pcie", port);
|
||||
if (err) {
|
||||
dev_err(dev, "unable to request irq %d\n", port->irq);
|
||||
return err;
|
||||
|
|
|
@ -59,6 +59,13 @@ static inline void of_pci_check_probe_only(void) { }
|
|||
int of_pci_get_host_bridge_resources(struct device_node *dev,
|
||||
unsigned char busno, unsigned char bus_max,
|
||||
struct list_head *resources, resource_size_t *io_base);
|
||||
#else
|
||||
static inline int of_pci_get_host_bridge_resources(struct device_node *dev,
|
||||
unsigned char busno, unsigned char bus_max,
|
||||
struct list_head *resources, resource_size_t *io_base)
|
||||
{
|
||||
return -EINVAL;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_OF) && defined(CONFIG_PCI_MSI)
|
||||
|
|
Загрузка…
Ссылка в новой задаче