net: qmi_wwan: support devices having a shared QMI/wwan interface

Use the new cdc-wdm subdriver interface to create a device management
device even for USB devices having a single combined QMI/wwan USB
interface with three endpoints (int, bulk in, bulk out) instead of
separate data and control interfaces.

Some Huawei devices can be switched to a single interface mode for
use with other operating systems than Linux.  This adds support
for these devices when they run in such non-Linux modes.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Bjørn Mork 2012-03-09 12:35:05 +01:00 коммит произвёл Greg Kroah-Hartman
Родитель 423ce8caab
Коммит c3ecb08abe
1 изменённых файлов: 152 добавлений и 16 удалений

Просмотреть файл

@ -13,6 +13,7 @@
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
/* The name of the CDC Device Management driver */
#define DM_DRIVER "cdc_wdm"
@ -64,6 +65,9 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
struct usb_cdc_ether_desc *cdc_ether = NULL;
u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
u32 found = 0;
atomic_t *pmcount = (void *)&dev->data[1];
atomic_set(pmcount, 0);
/*
* assume a data interface has no additional descriptors and
@ -170,13 +174,127 @@ err:
return status;
}
/* stolen from cdc_ether.c */
/* using a counter to merge subdriver requests with our own into a combined state */
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
dev->intf->needs_remote_wakeup = on;
return 0;
atomic_t *pmcount = (void *)&dev->data[1];
int rv = 0;
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
/* need autopm_get/put here to ensure the usbcore sees the new value */
rv = usb_autopm_get_interface(dev->intf);
if (rv < 0)
goto err;
dev->intf->needs_remote_wakeup = on;
usb_autopm_put_interface(dev->intf);
}
err:
return rv;
}
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
return qmi_wwan_manage_power(dev, on);
}
/* Some devices combine the "control" and "data" functions into a
* single interface with all three endpoints: interrupt + bulk in and
* out
*
* Setting up cdc-wdm as a subdriver owning the interrupt endpoint
* will let it provide userspace access to the encapsulated QMI
* protocol without interfering with the usbnet operations.
*/
static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
{
int rv;
struct usb_driver *subdriver = NULL;
atomic_t *pmcount = (void *)&dev->data[1];
atomic_set(pmcount, 0);
/* collect all three endpoints */
rv = usbnet_get_endpoints(dev, intf);
if (rv < 0)
goto err;
/* require interrupt endpoint for subdriver */
if (!dev->status) {
rv = -EINVAL;
goto err;
}
subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
if (IS_ERR(subdriver)) {
rv = PTR_ERR(subdriver);
goto err;
}
/* can't let usbnet use the interrupt endpoint */
dev->status = NULL;
/* save subdriver struct for suspend/resume wrappers */
dev->data[0] = (unsigned long)subdriver;
err:
return rv;
}
static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
{
struct usb_driver *subdriver = (void *)dev->data[0];
if (subdriver && subdriver->disconnect)
subdriver->disconnect(intf);
dev->data[0] = (unsigned long)NULL;
}
/* suspend/resume wrappers calling both usbnet and the cdc-wdm
* subdriver if present.
*
* NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
* wrappers for those without adding usbnet reset support first.
*/
static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct usb_driver *subdriver = (void *)dev->data[0];
int ret;
ret = usbnet_suspend(intf, message);
if (ret < 0)
goto err;
if (subdriver && subdriver->suspend)
ret = subdriver->suspend(intf, message);
if (ret < 0)
usbnet_resume(intf);
err:
return ret;
}
static int qmi_wwan_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
struct usb_driver *subdriver = (void *)dev->data[0];
int ret = 0;
if (subdriver && subdriver->resume)
ret = subdriver->resume(intf);
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
subdriver->suspend(intf, PMSG_SUSPEND);
err:
return ret;
}
static const struct driver_info qmi_wwan_info = {
.description = "QMI speaking wwan device",
.flags = FLAG_WWAN,
@ -184,19 +302,37 @@ static const struct driver_info qmi_wwan_info = {
.manage_power = qmi_wwan_manage_power,
};
static const struct driver_info qmi_wwan_shared = {
.description = "QMI speaking wwan device with combined interface",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
};
#define HUAWEI_VENDOR_ID 0x12D1
static const struct usb_device_id products[] = {
{
/* Huawei E392, E398 and possibly others sharing both device id and more... */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
.driver_info = (unsigned long)&qmi_wwan_info,
}, {
}, /* END */
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* Huawei E392, E398 and possibly others in "Windows mode"
* using a combined control and data interface without any CDC
* functional descriptors
*/
.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = HUAWEI_VENDOR_ID,
.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 17,
.driver_info = (unsigned long)&qmi_wwan_shared,
},
{ } /* END */
};
MODULE_DEVICE_TABLE(usb, products);
@ -205,9 +341,9 @@ static struct usb_driver qmi_wwan_driver = {
.id_table = products,
.probe = usbnet_probe,
.disconnect = usbnet_disconnect,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
.reset_resume = usbnet_resume,
.suspend = qmi_wwan_suspend,
.resume = qmi_wwan_resume,
.reset_resume = qmi_wwan_resume,
.supports_autosuspend = 1,
};