Merge branch 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards

* 'board' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: add minimal support for Nokia RM-696
  ARM: OMAP: enable Bluetooth on the PandaBoard
  ARM: OMAP: pandora: add support for backlight and poweroff
  ARM: OMAP4: board-4430sdp: don't initialize value that is never used
  ARM: OMAP3: cm-t3517: add EMAC support
  ARM: OMAP: move generic EMAC init to separate file
  ARM: OMAP3: RX-51: add explicit mux configuration of tsc2005 control gpios
  ARM: OMAP: Add omap_reserve functionality

  (includes sync-up to 3.3-rc6)
This commit is contained in:
Olof Johansson 2012-03-10 09:15:30 -08:00
Родитель 1ad4fb2f7c 63fc5f3bb3
Коммит c454f81350
205 изменённых файлов: 1503 добавлений и 747 удалений

Просмотреть файл

@ -3780,7 +3780,7 @@ F: Documentation/kdump/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
M: Ian Kent <raven@themaw.net>
L: autofs@linux.kernel.org
L: autofs@vger.kernel.org
S: Maintained
F: fs/autofs4/
@ -4685,7 +4685,7 @@ NTFS FILESYSTEM
M: Anton Altaparmakov <anton@tuxera.com>
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.tuxera.com/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
S: Supported
F: Documentation/filesystems/ntfs.txt
F: fs/ntfs/
@ -7271,7 +7271,7 @@ WATCHDOG DEVICE DRIVERS
M: Wim Van Sebroeck <wim@iguana.be>
L: linux-watchdog@vger.kernel.org
W: http://www.linux-watchdog.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
T: git git://www.linux-watchdog.org/linux-watchdog.git
S: Maintained
F: Documentation/watchdog/
F: drivers/watchdog/

Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

Просмотреть файл

@ -61,7 +61,7 @@
*/
#define IRQ_LPC32XX_JTAG_COMM_TX LPC32XX_SIC1_IRQ(1)
#define IRQ_LPC32XX_JTAG_COMM_RX LPC32XX_SIC1_IRQ(2)
#define IRQ_LPC32XX_GPI_11 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_GPI_28 LPC32XX_SIC1_IRQ(4)
#define IRQ_LPC32XX_TS_P LPC32XX_SIC1_IRQ(6)
#define IRQ_LPC32XX_TS_IRQ LPC32XX_SIC1_IRQ(7)
#define IRQ_LPC32XX_TS_AUX LPC32XX_SIC1_IRQ(8)

Просмотреть файл

@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
},
[IRQ_LPC32XX_GPI_28] = {
.event_group = &lpc32xx_event_pin_regs,
.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
},
[IRQ_LPC32XX_GPIO_00] = {
.event_group = &lpc32xx_event_int_regs,
.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
if (state)
eventreg |= lpc32xx_events[d->irq].mask;
else
else {
eventreg &= ~lpc32xx_events[d->irq].mask;
/*
* When disabling the wakeup, clear the latched
* event
*/
__raw_writel(lpc32xx_events[d->irq].mask,
lpc32xx_events[d->irq].
event_group->rawstat_reg);
}
__raw_writel(eventreg,
lpc32xx_events[d->irq].event_group->enab_reg);
@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
/* Setup SIC1 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
__raw_writel(SIC1_ATR_DEFAULT,
LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
/* Setup SIC2 */
__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
__raw_writel(SIC2_ATR_DEFAULT,
LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
/* Configure supported IRQ's */
for (i = 0; i < NR_IRQS; i++) {

Просмотреть файл

@ -88,6 +88,7 @@ struct uartinit {
char *uart_ck_name;
u32 ck_mode_mask;
void __iomem *pdiv_clk_reg;
resource_size_t mapbase;
};
static struct uartinit uartinit_data[] __initdata = {
@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
.mapbase = LPC32XX_UART5_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
.mapbase = LPC32XX_UART3_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
.mapbase = LPC32XX_UART4_BASE,
},
#endif
#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
.ck_mode_mask =
LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
.mapbase = LPC32XX_UART6_BASE,
},
#endif
};
@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
/* pre-UART clock divider set to 1 */
__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
/*
* Force a flush of the RX FIFOs to work around a
* HW bug
*/
puart = uartinit_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
j = LPC32XX_SUART_FIFO_SIZE;
while (j--)
tmp = __raw_readl(
LPC32XX_UART_DLL_FIFO(puart));
__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
}
/* This needs to be done after all UART clocks are setup */
__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
/* Force a flush of the RX FIFOs to work around a HW bug */
puart = serial_std_platform_data[i].mapbase;
__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

Просмотреть файл

@ -24,7 +24,6 @@
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/pxa168.h>

Просмотреть файл

@ -12,7 +12,6 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

Просмотреть файл

@ -416,13 +416,13 @@ static void __init innovator_init(void)
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
omap1_usb_init(&innovator1510_usb_config);
innovator_config[1].data = &innovator1510_lcd_config;
innovator_config[0].data = &innovator1510_lcd_config;
}
#endif
#ifdef CONFIG_ARCH_OMAP16XX
if (cpu_is_omap1610()) {
omap1_usb_init(&h2_usb_config);
innovator_config[1].data = &innovator1610_lcd_config;
innovator_config[0].data = &innovator1610_lcd_config;
}
#endif
omap_board_config = innovator_config;

Просмотреть файл

@ -245,10 +245,11 @@ config MACH_NOKIA_N8X0
select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RM680
bool "Nokia RM-680 board"
bool "Nokia RM-680/696 board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select MACH_NOKIA_RM696
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
@ -364,8 +365,8 @@ config OMAP3_SDRC_AC_TIMING
going on could result in system crashes;
config OMAP4_ERRATA_I688
bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
depends on ARCH_OMAP4 && BROKEN
bool "OMAP4 errata: Async Bridge Corruption"
depends on ARCH_OMAP4
select ARCH_HAS_BARRIERS
help
If a data is stalled inside asynchronous bridge because of back

Просмотреть файл

@ -270,4 +270,7 @@ smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o
obj-y += $(emac-m) $(emac-y)
obj-y += common-board-devices.o twl-common.o

Просмотреть файл

@ -0,0 +1,117 @@
/*
* Copyright (C) 2011 Ilya Yanok, Emcraft Systems
*
* Based on mach-omap2/board-am3517evm.c
* Copyright (C) 2009 Texas Instruments Incorporated
* Author: Ranjith Lohithakshan <ranjithl@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
* whether express or implied; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/platform_device.h>
#include <plat/irqs.h>
#include <mach/am35xx.h>
#include "control.h"
static struct mdio_platform_data am35xx_emac_mdio_pdata;
static struct resource am35xx_emac_mdio_resources[] = {
DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K),
};
static struct platform_device am35xx_emac_mdio_device = {
.name = "davinci_mdio",
.id = 0,
.num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources),
.resource = am35xx_emac_mdio_resources,
.dev.platform_data = &am35xx_emac_mdio_pdata,
};
static void am35xx_enable_emac_int(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
static void am35xx_disable_emac_int(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
static struct emac_platform_data am35xx_emac_pdata = {
.ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET,
.ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE,
.hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR,
.version = EMAC_VERSION_2,
.interrupt_enable = am35xx_enable_emac_int,
.interrupt_disable = am35xx_disable_emac_int,
};
static struct resource am35xx_emac_resources[] = {
DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000),
DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ),
DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ),
DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ),
DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ),
};
static struct platform_device am35xx_emac_device = {
.name = "davinci_emac",
.id = -1,
.num_resources = ARRAY_SIZE(am35xx_emac_resources),
.resource = am35xx_emac_resources,
.dev = {
.platform_data = &am35xx_emac_pdata,
},
};
void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
{
unsigned int regval;
int err;
am35xx_emac_pdata.rmii_en = rmii_en;
am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
err = platform_device_register(&am35xx_emac_device);
if (err) {
pr_err("AM35x: failed registering EMAC device: %d\n", err);
return;
}
err = platform_device_register(&am35xx_emac_mdio_device);
if (err) {
pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err);
platform_device_unregister(&am35xx_emac_device);
return;
}
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
}

Просмотреть файл

@ -0,0 +1,15 @@
/*
* Copyright (C) 2011 Ilya Yanok, Emcraft Systems
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000
#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en);
#else
static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {}
#endif

Просмотреть файл

@ -322,7 +322,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
.bus_num = 1,
.chip_select = 0,
.max_speed_hz = 24000000,
.irq = ETH_KS8851_IRQ,
/*
* .irq is set to gpio_to_irq(ETH_KS8851_IRQ)
* in omap_4430sdp_init
*/
},
};

Просмотреть файл

@ -39,124 +39,11 @@
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include "am35xx-emac.h"
#include "mux.h"
#include "control.h"
#include "hsmmc.h"
#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
static struct mdio_platform_data am3517_evm_mdio_pdata = {
.bus_freq = AM35XX_EVM_MDIO_FREQUENCY,
};
static struct resource am3517_mdio_resources[] = {
{
.start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
.end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device am3517_mdio_device = {
.name = "davinci_mdio",
.id = 0,
.num_resources = ARRAY_SIZE(am3517_mdio_resources),
.resource = am3517_mdio_resources,
.dev.platform_data = &am3517_evm_mdio_pdata,
};
static struct emac_platform_data am3517_evm_emac_pdata = {
.rmii_en = 1,
};
static struct resource am3517_emac_resources[] = {
{
.start = AM35XX_IPSS_EMAC_BASE,
.end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
.flags = IORESOURCE_MEM,
},
{
.start = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
.end = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
.flags = IORESOURCE_IRQ,
},
{
.start = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
.end = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
.flags = IORESOURCE_IRQ,
},
{
.start = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
.end = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
.flags = IORESOURCE_IRQ,
},
{
.start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
.end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device am3517_emac_device = {
.name = "davinci_emac",
.id = -1,
.num_resources = ARRAY_SIZE(am3517_emac_resources),
.resource = am3517_emac_resources,
};
static void am3517_enable_ethernet_int(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
static void am3517_disable_ethernet_int(void)
{
u32 regval;
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
}
static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
{
unsigned int regval;
pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET;
pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET;
pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET;
pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE;
pdata->version = EMAC_VERSION_2;
pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR;
pdata->interrupt_enable = am3517_enable_ethernet_int;
pdata->interrupt_disable = am3517_disable_ethernet_int;
am3517_emac_device.dev.platform_data = pdata;
platform_device_register(&am3517_emac_device);
platform_device_register(&am3517_mdio_device);
clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
NULL, &am3517_emac_device.dev);
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
return ;
}
#define LCD_PANEL_PWR 176
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
@ -498,7 +385,7 @@ static void __init am3517_evm_init(void)
i2c_register_board_info(1, am3517evm_i2c1_boardinfo,
ARRAY_SIZE(am3517evm_i2c1_boardinfo));
/*Ethernet*/
am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
/* MUSB */
am3517_evm_musb_init();

Просмотреть файл

@ -49,6 +49,7 @@
#include "mux.h"
#include "control.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
@ -291,6 +292,7 @@ static void __init cm_t3517_init(void)
cm_t3517_init_rtc();
cm_t3517_init_usbh();
cm_t3517_init_hecc();
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")

Просмотреть файл

@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
else
*openp = 0;
#ifdef CONFIG_MMC_OMAP
omap_mmc_notify_cover_event(mmc_device, index, *openp);
#else
pr_warn("MMC: notify cover event not available\n");
#endif
}
static int n8x0_mmc_late_init(struct device *dev)

Просмотреть файл

@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
platform_device_register(&leds_gpio);

Просмотреть файл

@ -205,6 +205,7 @@ static void __init omap3logic_init(void)
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
@ -216,6 +217,7 @@ MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,

Просмотреть файл

@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = {
},
};
static struct platform_device pandora_backlight = {
.name = "pandora-backlight",
.id = -1,
};
#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
{ \
.gpio = gpio_num, \
@ -476,6 +481,10 @@ static struct platform_device pandora_vwlan_device = {
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_power_data pandora_power_data = {
.use_poweroff = true,
};
static struct twl4030_platform_data omap3pandora_twldata = {
.gpio = &omap3pandora_gpio_data,
.vmmc1 = &pandora_vmmc1,
@ -486,6 +495,7 @@ static struct twl4030_platform_data omap3pandora_twldata = {
.vsim = &pandora_vsim,
.keypad = &pandora_kp_data,
.bci = &pandora_bci_data,
.power = &pandora_power_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
@ -557,6 +567,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
&pandora_vwlan_device,
&pandora_backlight,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {

Просмотреть файл

@ -91,9 +91,15 @@ static struct platform_device leds_gpio = {
},
};
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
};
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
&btwilink_device,
};
static const struct usbhs_omap_board_data usbhs_bdata __initconst = {

Просмотреть файл

@ -1,5 +1,5 @@
/*
* Board support file for Nokia RM-680.
* Board support file for Nokia RM-680/696.
*
* Copyright (C) 2010 Nokia
*
@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END
MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
.restart = omap_prcm_restart,
MACHINE_END

Просмотреть файл

@ -1105,6 +1105,11 @@ static struct tsc2005_platform_data tsc2005_pdata = {
.esd_timeout_ms = 8000,
};
static struct gpio rx51_tsc2005_gpios[] __initdata = {
{ RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" },
{ RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" },
};
static void rx51_tsc2005_set_reset(bool enable)
{
gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
@ -1114,20 +1119,18 @@ static void __init rx51_init_tsc2005(void)
{
int r;
r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ");
omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP);
r = gpio_request_array(rx51_tsc2005_gpios,
ARRAY_SIZE(rx51_tsc2005_gpios));
if (r < 0) {
printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ");
rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0;
printk(KERN_ERR "tsc2005 board initialization failed\n");
tsc2005_pdata.esd_timeout_ms = 0;
return;
}
r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
"tsc2005 reset");
if (r >= 0) {
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
} else {
printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset");
tsc2005_pdata.esd_timeout_ms = 0;
}
tsc2005_pdata.set_reset = rx51_tsc2005_set_reset;
}
void __init rx51_peripherals_init(void)

Просмотреть файл

@ -132,6 +132,7 @@ void omap3_map_io(void);
void am33xx_map_io(void);
void omap4_map_io(void);
void ti81xx_map_io(void);
void omap_barriers_init(void);
/**
* omap_test_timeout - busy-loop, testing a condition

Просмотреть файл

@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
struct timespec ts_preidle, ts_postidle, ts_idle;
u32 cpu1_state;
int idle_time;
int new_state_idx;
int cpu_id = smp_processor_id();
/* Used to keep track of the total time in idle */
@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
*/
cpu1_state = pwrdm_read_pwrst(cpu1_pd);
if (cpu1_state != PWRDM_POWER_OFF) {
new_state_idx = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
index = drv->safe_state_index;
cx = cpuidle_get_statedata(&dev->states_usage[index]);
}
if (index > 0)

Просмотреть файл

@ -19,6 +19,8 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
.flags = SMSC911X_USE_16BIT,
};
static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
};
/* Generic regulator definition to satisfy smsc911x */
static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
.consumer_supplies = gpmc_smsc911x_supply,
};
static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
.supply_name = "gpmc_smsc911x",
.microvolts = 3300000,
.gpio = -EINVAL,
.startup_delay = 0,
.enable_high = 0,
.enabled_at_boot = 1,
.init_data = &gpmc_smsc911x_reg_init_data,
};
/*
* Platform device id of 42 is a temporary fix to avoid conflicts
* with other reg-fixed-voltage devices. The real fix should
* involve the driver core providing a way of dynamically
* assigning a unique id on registration for platform devices
* in the same name space.
*/
static struct platform_device gpmc_smsc911x_regulator = {
.name = "reg-fixed-voltage",
.id = 42,
.dev = {
.platform_data = &gpmc_smsc911x_fixed_reg_data,
},
};
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpmc_cfg = board_data;
ret = platform_device_register(&gpmc_smsc911x_regulator);
if (ret < 0) {
pr_err("Unable to register smsc911x regulators: %d\n", ret);
return;
}
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;

Просмотреть файл

@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return 0;
}
static int omap_hsmmc_done;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
if (omap_hsmmc_done)
return;
omap_hsmmc_done = 1;
if (!cpu_is_omap44xx()) {
if (cpu_is_omap2430()) {
control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

Просмотреть файл

@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
}
#endif

Просмотреть файл

@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
.ops = &omap2_mbox_ops,
.priv = &omap2_mbox_iva_priv,
};
#endif
struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
#ifdef CONFIG_ARCH_OMAP2
struct omap_mbox *omap2_mboxes[] = {
&mbox_dsp_info,
#ifdef CONFIG_SOC_OMAP2420
&mbox_iva_info,
#endif
NULL
};
#endif
#if defined(CONFIG_ARCH_OMAP4)
@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void)
platform_driver_unregister(&omap2_mbox_driver);
}
module_init(omap2_mbox_init);
/* must be ready before omap3isp is probed */
subsys_initcall(omap2_mbox_init);
module_exit(omap2_mbox_exit);
MODULE_LICENSE("GPL v2");

Просмотреть файл

@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
static int __init
static int
omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)

Просмотреть файл

@ -24,6 +24,7 @@
#include <plat/irqs.h>
#include <plat/sram.h>
#include <plat/omap-secure.h>
#include <mach/hardware.h>
#include <mach/omap-wakeupgen.h>
@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
void __iomem *dram_sync, *sram_sync;
static phys_addr_t paddr;
static u32 size;
void omap_bus_sync(void)
{
if (dram_sync && sram_sync) {
@ -52,18 +56,20 @@ void omap_bus_sync(void)
}
}
static int __init omap_barriers_init(void)
/* Steal one page physical memory for barrier implementation */
int __init omap_barrier_reserve_memblock(void)
{
struct map_desc dram_io_desc[1];
phys_addr_t paddr;
u32 size;
if (!cpu_is_omap44xx())
return -ENODEV;
size = ALIGN(PAGE_SIZE, SZ_1M);
paddr = arm_memblock_steal(size, SZ_1M);
return 0;
}
void __init omap_barriers_init(void)
{
struct map_desc dram_io_desc[1];
dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
dram_io_desc[0].pfn = __phys_to_pfn(paddr);
dram_io_desc[0].length = size;
@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
(long long) paddr, dram_io_desc[0].virtual);
return 0;
}
core_initcall(omap_barriers_init);
#else
void __init omap_barriers_init(void)
{}
#endif
void __init gic_init_irq(void)

Просмотреть файл

@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
freq = clk->rate;
clk_put(clk);
rcu_read_lock();
opp = opp_find_freq_ceil(dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
pr_err("%s: unable to find boot up OPP for vdd_%s\n",
__func__, vdd_name);
goto exit;
}
bootup_volt = opp_get_voltage(opp);
rcu_read_unlock();
if (!bootup_volt) {
pr_err("%s: unable to find voltage corresponding "
"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

Просмотреть файл

@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
struct omap_hwmod *oh[2];
struct omap_device *od;
struct platform_device *pdev;
int bus_id = -1;
int i;
@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
return;
}
od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
(void *)&usbhs_data, sizeof(usbhs_data),
omap_uhhtll_latency,
ARRAY_SIZE(omap_uhhtll_latency), false);
if (IS_ERR(od)) {
if (IS_ERR(pdev)) {
pr_err("Could not build hwmod devices %s,%s\n",
USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
return;

Просмотреть файл

@ -45,6 +45,7 @@
#include <mach/hx4700.h>
#include <mach/irda.h>
#include <sound/ak4641.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
@ -779,6 +780,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
},
};
/*
* Asahi Kasei AK4641 on I2C
*/
static struct ak4641_platform_data ak4641_info = {
.gpio_power = GPIO27_HX4700_CODEC_ON,
.gpio_npdn = GPIO109_HX4700_CODEC_nPDN,
};
static struct i2c_board_info i2c_board_info[] __initdata = {
{
I2C_BOARD_INFO("ak4641", 0x12),
.platform_data = &ak4641_info,
},
};
static struct platform_device audio = {
.name = "hx4700-audio",
.id = -1,
};
/*
* PCMCIA
*/
@ -805,6 +828,7 @@ static struct platform_device *devices[] __initdata = {
&gpio_vbus,
&power_supply,
&strataflash,
&audio,
&pcmcia,
};
@ -842,6 +866,7 @@ static void __init hx4700_init(void)
pxa_set_ficp_info(&ficp_info);
pxa27x_set_i2c_power_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

Просмотреть файл

@ -25,7 +25,6 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <asm/suspend.h>

Просмотреть файл

@ -22,7 +22,6 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/gpio.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>

Просмотреть файл

@ -15,7 +15,6 @@
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/mfd/88pm860x.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>

Просмотреть файл

@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
#define MAXCTRL_SEL_SH 4
#define MAXCTRL_STR (1u << 7)
extern int max1111_read_channel(int);
/*
* Read MAX1111 ADC
*/
@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
if (machine_is_tosa())
return 0;
extern int max1111_read_channel(int);
/* max1111 accepts channels from 0-3, however,
* it is encoded from 0-7 here in the code.
*/

Просмотреть файл

@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
static unsigned long spitz_charger_wakeup(void)
{
unsigned long ret;
ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
<< GPIO_bit(SPITZ_GPIO_KEY_INT))
| (!gpio_get_value(SPITZ_GPIO_SYNC)
<< GPIO_bit(SPITZ_GPIO_SYNC));
| gpio_get_value(SPITZ_GPIO_SYNC));
return ret;
}

Просмотреть файл

@ -69,6 +69,7 @@ void __init omap_reserve(void)
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
omap_barrier_reserve_memblock();
}
void __init omap_init_consistent_dma_size(void)

Просмотреть файл

@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
{ }
#endif
#ifdef CONFIG_OMAP4_ERRATA_I688
extern int omap_barrier_reserve_memblock(void);
#else
static inline void omap_barrier_reserve_memblock(void)
{ }
#endif
#endif /* __OMAP_SECURE_H__ */

Просмотреть файл

@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_OMAP3(3, igep0020);
DEBUG_LL_OMAP3(3, igep0030);
DEBUG_LL_OMAP3(3, nokia_rm680);
DEBUG_LL_OMAP3(3, nokia_rm696);
DEBUG_LL_OMAP3(3, nokia_rx51);
DEBUG_LL_OMAP3(3, omap3517evm);
DEBUG_LL_OMAP3(3, omap3_beagle);

Просмотреть файл

@ -77,7 +77,6 @@ struct pt_regs {
long syscallno; /* Syscall number (used by strace) */
long dummy; /* Cheap alignment fix */
};
#endif /* __ASSEMBLY__ */
/* TODO: Rename this to REDZONE because that's what it is */
#define STACK_FRAME_OVERHEAD 128 /* size of minimum stack frame */
@ -87,6 +86,13 @@ struct pt_regs {
#define user_stack_pointer(regs) ((unsigned long)(regs)->sp)
#define profile_pc(regs) instruction_pointer(regs)
static inline long regs_return_value(struct pt_regs *regs)
{
return regs->gpr[11];
}
#endif /* __ASSEMBLY__ */
/*
* Offsets used by 'ptrace' system call interface.
*/

Просмотреть файл

@ -17,6 +17,7 @@
#include <linux/init_task.h>
#include <linux/mqueue.h>
#include <linux/export.h>
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);

Просмотреть файл

@ -23,6 +23,7 @@
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
#include <linux/export.h>
#include <linux/irqflags.h>

Просмотреть файл

@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
*/
ret = -1L;
/* Are these regs right??? */
if (unlikely(current->audit_context))
audit_syscall_entry(audit_arch(), regs->syscallno,
regs->gpr[3], regs->gpr[4],
regs->gpr[5], regs->gpr[6]);
audit_syscall_entry(audit_arch(), regs->syscallno,
regs->gpr[3], regs->gpr[4],
regs->gpr[5], regs->gpr[6]);
return ret ? : regs->syscallno;
}
@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
{
int step;
if (unlikely(current->audit_context))
audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]),
regs->gpr[11]);
audit_syscall_exit(regs);
step = test_thread_flag(TIF_SINGLESTEP);
if (step || test_thread_flag(TIF_SYSCALL_TRACE))

Просмотреть файл

@ -31,7 +31,11 @@ ifdef CONFIG_64BIT
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
WIDTH := 64
# FIXME: if no default set, should really try to locate dynamically
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := hppa64-linux-gnu-
endif
else # 32-bit
WIDTH :=
endif

Просмотреть файл

@ -227,6 +227,9 @@ config COMPAT
config SYSVIPC_COMPAT
def_bool y if COMPAT && SYSVIPC
config KEYS_COMPAT
def_bool y if COMPAT && KEYS
config AUDIT_ARCH
def_bool y

Просмотреть файл

@ -172,13 +172,6 @@ static inline int is_compat_task(void)
return is_32bit_task();
}
#else
static inline int is_compat_task(void)
{
return 0;
}
#endif
static inline void __user *arch_compat_alloc_user_space(long len)

Просмотреть файл

@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
#include <linux/elf.h>
#include <asm/ipl.h>

Просмотреть файл

@ -29,7 +29,6 @@
#include <asm/irq.h>
#include <asm/timer.h>
#include <asm/nmi.h>
#include <asm/compat.h>
#include <asm/smp.h>
#include "entry.h"

Просмотреть файл

@ -20,8 +20,8 @@
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/seccomp.h>
#include <linux/compat.h>
#include <trace/syscall.h>
#include <asm/compat.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>

Просмотреть файл

@ -46,6 +46,7 @@
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/memory.h>
#include <linux/compat.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
@ -59,7 +60,6 @@
#include <asm/ptrace.h>
#include <asm/sections.h>
#include <asm/ebcdic.h>
#include <asm/compat.h>
#include <asm/kvm_virtio.h>
#include <asm/diag.h>

Просмотреть файл

@ -30,7 +30,6 @@
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
#include <asm/compat.h>
#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))

Просмотреть файл

@ -36,7 +36,6 @@
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mmu_context.h>
#include <asm/compat.h>
#include "../kernel/entry.h"
#ifndef CONFIG_64BIT

Просмотреть файл

@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end)
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size)
{
struct pglist_data *pgdat;
unsigned long zone_start_pfn, zone_end_pfn, nr_pages;
unsigned long start_pfn = PFN_DOWN(start);
unsigned long size_pages = PFN_DOWN(size);
struct zone *zone;
int rc;
pgdat = NODE_DATA(nid);
zone = pgdat->node_zones + ZONE_MOVABLE;
rc = vmem_add_mapping(start, size);
if (rc)
return rc;
rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size));
for_each_zone(zone) {
if (zone_idx(zone) != ZONE_MOVABLE) {
/* Add range within existing zone limits */
zone_start_pfn = zone->zone_start_pfn;
zone_end_pfn = zone->zone_start_pfn +
zone->spanned_pages;
} else {
/* Add remaining range to ZONE_MOVABLE */
zone_start_pfn = start_pfn;
zone_end_pfn = start_pfn + size_pages;
}
if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn)
continue;
nr_pages = (start_pfn + size_pages > zone_end_pfn) ?
zone_end_pfn - start_pfn : size_pages;
rc = __add_pages(nid, zone, start_pfn, nr_pages);
if (rc)
break;
start_pfn += nr_pages;
size_pages -= nr_pages;
if (!size_pages)
break;
}
if (rc)
vmem_remove_mapping(start, size);
return rc;

Просмотреть файл

@ -29,8 +29,8 @@
#include <linux/mman.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/compat.h>
#include <asm/pgalloc.h>
#include <asm/compat.h>
static unsigned long stack_maxrandom_size(void)
{

Просмотреть файл

@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
static inline void perf_events_lapic_init(void) { }
#endif
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
extern void amd_pmu_enable_virt(void);
extern void amd_pmu_disable_virt(void);
#else
static inline void amd_pmu_enable_virt(void) { }
static inline void amd_pmu_disable_virt(void) { }
#endif
#endif /* _ASM_X86_PERF_EVENT_H */

Просмотреть файл

@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb)
l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
}
static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
int index)
static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
{
int node;
@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info);
#define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y]))
#ifdef CONFIG_SMP
static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
{
struct _cpuid4_info *this_leaf, *sibling_leaf;
unsigned long num_threads_sharing;
int index_msb, i, sibling;
struct _cpuid4_info *this_leaf;
int ret, i, sibling;
struct cpuinfo_x86 *c = &cpu_data(cpu);
if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
ret = 0;
if (index == 3) {
ret = 1;
for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
if (!per_cpu(ici_cpuid4_info, i))
continue;
@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
set_bit(sibling, this_leaf->shared_cpu_map);
}
}
return;
} else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
ret = 1;
for_each_cpu(i, cpu_sibling_mask(cpu)) {
if (!per_cpu(ici_cpuid4_info, i))
continue;
this_leaf = CPUID4_INFO_IDX(i, index);
for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
if (!cpu_online(sibling))
continue;
set_bit(sibling, this_leaf->shared_cpu_map);
}
}
}
return ret;
}
static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
{
struct _cpuid4_info *this_leaf, *sibling_leaf;
unsigned long num_threads_sharing;
int index_msb, i;
struct cpuinfo_x86 *c = &cpu_data(cpu);
if (c->x86_vendor == X86_VENDOR_AMD) {
if (cache_shared_amd_cpu_map_setup(cpu, index))
return;
}
this_leaf = CPUID4_INFO_IDX(cpu, index);
num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;

Просмотреть файл

@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
sprintf(name, "threshold_bank%i", bank);
#ifdef CONFIG_SMP
if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */
i = cpumask_first(cpu_llc_shared_mask(cpu));
@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
goto out;
}
#endif
b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
if (!b) {

Просмотреть файл

@ -147,7 +147,9 @@ struct cpu_hw_events {
/*
* AMD specific bits
*/
struct amd_nb *amd_nb;
struct amd_nb *amd_nb;
/* Inverted mask of bits to clear in the perf_ctr ctrl registers */
u64 perf_ctr_virt_mask;
void *kfree_on_online;
};
@ -417,9 +419,11 @@ void x86_pmu_disable_all(void);
static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
u64 enable_mask)
{
u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
if (hwc->extra_reg.reg)
wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
wrmsrl(hwc->config_base, hwc->config | enable_mask);
wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
}
void x86_pmu_enable_all(int added);

Просмотреть файл

@ -1,4 +1,5 @@
#include <linux/perf_event.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/slab.h>
@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu)
struct amd_nb *nb;
int i, nb_id;
if (boot_cpu_data.x86_max_cores < 2)
cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
return;
nb_id = amd_get_nb_id(cpu);
@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = {
.put_event_constraints = amd_put_event_constraints,
.cpu_prepare = amd_pmu_cpu_prepare,
.cpu_starting = amd_pmu_cpu_starting,
.cpu_dead = amd_pmu_cpu_dead,
#endif
.cpu_starting = amd_pmu_cpu_starting,
};
__init int amd_pmu_init(void)
@ -621,3 +624,33 @@ __init int amd_pmu_init(void)
return 0;
}
void amd_pmu_enable_virt(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
cpuc->perf_ctr_virt_mask = 0;
/* Reload all events */
x86_pmu_disable_all();
x86_pmu_enable_all(0);
}
EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
void amd_pmu_disable_virt(void)
{
struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
/*
* We only mask out the Host-only bit so that host-only counting works
* when SVM is disabled. If someone sets up a guest-only counter when
* SVM is disabled the Guest-only bits still gets set and the counter
* will not count anything.
*/
cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
/* Reload all events */
x86_pmu_disable_all();
x86_pmu_enable_all(0);
}
EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);

Просмотреть файл

@ -1531,11 +1531,18 @@ ENTRY(nmi)
/* Use %rdx as out temp variable throughout */
pushq_cfi %rdx
/*
* If %cs was not the kernel segment, then the NMI triggered in user
* space, which means it is definitely not nested.
*/
cmpl $__KERNEL_CS, 16(%rsp)
jne first_nmi
/*
* Check the special variable on the stack to see if NMIs are
* executing.
*/
cmp $1, -8(%rsp)
cmpl $1, -8(%rsp)
je nested_nmi
/*

Просмотреть файл

@ -360,7 +360,6 @@ out:
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
return UCODE_ERROR;
}

Просмотреть файл

@ -29,6 +29,7 @@
#include <linux/ftrace_event.h>
#include <linux/slab.h>
#include <asm/perf_event.h>
#include <asm/tlbflush.h>
#include <asm/desc.h>
#include <asm/kvm_para.h>
@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage)
wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
cpu_svm_disable();
amd_pmu_disable_virt();
}
static int svm_hardware_enable(void *garbage)
@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage)
svm_init_erratum_383();
amd_pmu_enable_virt();
return 0;
}

Просмотреть файл

@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void)
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
#if 0
if (!xen_initial_domain())
#endif
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void)
pgd = (pgd_t *)xen_start_info->pt_base;
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];

Просмотреть файл

@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val)
static pteval_t xen_pte_val(pte_t pte)
{
pteval_t pteval = pte.pte;
#if 0
/* If this is a WC pte, convert back from Xen WC to Linux WC */
if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
WARN_ON(!pat_enabled);
pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
}
#endif
if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
return pteval;
@ -463,7 +463,7 @@ void xen_set_pat(u64 pat)
static pte_t xen_make_pte(pteval_t pte)
{
phys_addr_t addr = (pte & PTE_PFN_MASK);
#if 0
/* If Linux is trying to set a WC pte, then map to the Xen WC.
* If _PAGE_PAT is set, then it probably means it is really
* _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte)
if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
}
#endif
/*
* Unprivileged domains are allowed to do IOMAPpings for
* PCI passthrough, but not map ISA space. The ISA

Просмотреть файл

@ -2,7 +2,7 @@
* ldm - Support for Windows Logical Disk Manager (Dynamic Disks)
*
* Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org>
* Copyright (c) 2001-2007 Anton Altaparmakov
* Copyright (c) 2001-2012 Anton Altaparmakov
* Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
*
* Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads
@ -1341,20 +1341,17 @@ found:
ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num);
return false;
}
if (f->map & (1 << rec)) {
ldm_error ("Duplicate VBLK, part %d.", rec);
f->map &= 0x7F; /* Mark the group as broken */
return false;
}
f->map |= (1 << rec);
if (!rec)
memcpy(f->data, data, VBLK_SIZE_HEAD);
data += VBLK_SIZE_HEAD;
size -= VBLK_SIZE_HEAD;
memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
memcpy(f->data + VBLK_SIZE_HEAD + rec * size, data, size);
return true;
}

Просмотреть файл

@ -1206,9 +1206,9 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
out_unmap_both:
pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->config_regs);
out_unmap_config:
pci_iounmap(dev, card->buffers);
out_unmap_config:
pci_iounmap(dev, card->config_regs);
out_release_regions:
pci_release_regions(dev);
out:

Просмотреть файл

@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
/* Broadcom BCM20702A0 */
{ USB_DEVICE(0x0a5c, 0x21e3) },
{ USB_DEVICE(0x0a5c, 0x21f3) },
{ USB_DEVICE(0x413c, 0x8197) },
{ } /* Terminating entry */
@ -726,9 +727,6 @@ static int btusb_send_frame(struct sk_buff *skb)
usb_fill_bulk_urb(urb, data->udev, pipe,
skb->data, skb->len, btusb_tx_complete, skb);
if (skb->priority >= HCI_PRIO_MAX - 1)
urb->transfer_flags = URB_ISO_ASAP;
hdev->stat.acl_tx++;
break;

Просмотреть файл

@ -714,6 +714,7 @@ static int mv_hash_final(struct ahash_request *req)
{
struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
ahash_request_set_crypt(req, NULL, req->result, 0);
mv_update_hash_req_ctx(ctx, 1, 0);
return mv_handle_req(&req->base);
}

Просмотреть файл

@ -28,6 +28,7 @@
#include "drmP.h"
#include "drm_crtc_helper.h"
#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_encoder.h"
@ -44,8 +45,9 @@ struct exynos_drm_connector {
/* convert exynos_video_timings to drm_display_mode */
static inline void
convert_to_display_mode(struct drm_display_mode *mode,
struct fb_videomode *timing)
struct exynos_drm_panel_info *panel)
{
struct fb_videomode *timing = &panel->timing;
DRM_DEBUG_KMS("%s\n", __FILE__);
mode->clock = timing->pixclock / 1000;
@ -60,6 +62,8 @@ convert_to_display_mode(struct drm_display_mode *mode,
mode->vsync_start = mode->vdisplay + timing->upper_margin;
mode->vsync_end = mode->vsync_start + timing->vsync_len;
mode->vtotal = mode->vsync_end + timing->lower_margin;
mode->width_mm = panel->width_mm;
mode->height_mm = panel->height_mm;
if (timing->vmode & FB_VMODE_INTERLACED)
mode->flags |= DRM_MODE_FLAG_INTERLACE;
@ -148,16 +152,18 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
connector->display_info.raw_edid = edid;
} else {
struct drm_display_mode *mode = drm_mode_create(connector->dev);
struct fb_videomode *timing;
struct exynos_drm_panel_info *panel;
if (display_ops->get_timing)
timing = display_ops->get_timing(manager->dev);
if (display_ops->get_panel)
panel = display_ops->get_panel(manager->dev);
else {
drm_mode_destroy(connector->dev, mode);
return 0;
}
convert_to_display_mode(mode, timing);
convert_to_display_mode(mode, panel);
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_set_name(mode);

Просмотреть файл

@ -136,7 +136,7 @@ struct exynos_drm_overlay {
* @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
* @is_connected: check for that display is connected or not.
* @get_edid: get edid modes from display driver.
* @get_timing: get timing object from display driver.
* @get_panel: get panel object from display driver.
* @check_timing: check if timing is valid or not.
* @power_on: display device on or off.
*/
@ -145,7 +145,7 @@ struct exynos_drm_display_ops {
bool (*is_connected)(struct device *dev);
int (*get_edid)(struct device *dev, struct drm_connector *connector,
u8 *edid, int len);
void *(*get_timing)(struct device *dev);
void *(*get_panel)(struct device *dev);
int (*check_timing)(struct device *dev, void *timing);
int (*power_on)(struct device *dev, int mode);
};

Просмотреть файл

@ -89,7 +89,7 @@ struct fimd_context {
bool suspended;
struct mutex lock;
struct fb_videomode *timing;
struct exynos_drm_panel_info *panel;
};
static bool fimd_display_is_connected(struct device *dev)
@ -101,13 +101,13 @@ static bool fimd_display_is_connected(struct device *dev)
return true;
}
static void *fimd_get_timing(struct device *dev)
static void *fimd_get_panel(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
DRM_DEBUG_KMS("%s\n", __FILE__);
return ctx->timing;
return ctx->panel;
}
static int fimd_check_timing(struct device *dev, void *timing)
@ -131,7 +131,7 @@ static int fimd_display_power_on(struct device *dev, int mode)
static struct exynos_drm_display_ops fimd_display_ops = {
.type = EXYNOS_DISPLAY_TYPE_LCD,
.is_connected = fimd_display_is_connected,
.get_timing = fimd_get_timing,
.get_panel = fimd_get_panel,
.check_timing = fimd_check_timing,
.power_on = fimd_display_power_on,
};
@ -193,7 +193,8 @@ static void fimd_apply(struct device *subdrv_dev)
static void fimd_commit(struct device *dev)
{
struct fimd_context *ctx = get_fimd_context(dev);
struct fb_videomode *timing = ctx->timing;
struct exynos_drm_panel_info *panel = ctx->panel;
struct fb_videomode *timing = &panel->timing;
u32 val;
if (ctx->suspended)
@ -786,7 +787,7 @@ static int __devinit fimd_probe(struct platform_device *pdev)
struct fimd_context *ctx;
struct exynos_drm_subdrv *subdrv;
struct exynos_drm_fimd_pdata *pdata;
struct fb_videomode *timing;
struct exynos_drm_panel_info *panel;
struct resource *res;
int win;
int ret = -EINVAL;
@ -799,9 +800,9 @@ static int __devinit fimd_probe(struct platform_device *pdev)
return -EINVAL;
}
timing = &pdata->timing;
if (!timing) {
dev_err(dev, "timing is null.\n");
panel = &pdata->panel;
if (!panel) {
dev_err(dev, "panel is null.\n");
return -EINVAL;
}
@ -863,16 +864,16 @@ static int __devinit fimd_probe(struct platform_device *pdev)
goto err_req_irq;
}
ctx->clkdiv = fimd_calc_clkdiv(ctx, timing);
ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
ctx->vidcon0 = pdata->vidcon0;
ctx->vidcon1 = pdata->vidcon1;
ctx->default_win = pdata->default_win;
ctx->timing = timing;
ctx->panel = panel;
timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
timing->pixclock, ctx->clkdiv);
panel->timing.pixclock, ctx->clkdiv);
subdrv = &ctx->subdrv;

Просмотреть файл

@ -4680,8 +4680,17 @@ sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
crtc = intel_get_crtc_for_plane(dev, plane);
clock = crtc->mode.clock;
if (!clock) {
*sprite_wm = 0;
return false;
}
line_time_us = (sprite_width * 1000) / clock;
if (!line_time_us) {
*sprite_wm = 0;
return false;
}
line_count = (latency_ns / line_time_us + 1000) / 1000;
line_size = sprite_width * pixel_size;
@ -6175,7 +6184,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
int i;
/* The clocks have to be on to load the palette. */
if (!crtc->enabled)
if (!crtc->enabled || !intel_crtc->active)
return;
/* use legacy palette for Ironlake */
@ -6561,7 +6570,7 @@ intel_framebuffer_create_for_mode(struct drm_device *dev,
mode_cmd.height = mode->vdisplay;
mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
bpp);
mode_cmd.pixel_format = 0;
mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
return intel_framebuffer_create(dev, &mode_cmd, obj);
}
@ -8185,7 +8194,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
if (intel_enable_rc6(dev_priv->dev))
rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
(IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0;
((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |

Просмотреть файл

@ -301,7 +301,7 @@ static int init_ring_common(struct intel_ring_buffer *ring)
I915_WRITE_CTL(ring,
((ring->size - PAGE_SIZE) & RING_NR_PAGES)
| RING_REPORT_64K | RING_VALID);
| RING_VALID);
/* If the head is still not zero, the ring is dead */
if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
@ -1132,18 +1132,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
struct drm_device *dev = ring->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long end;
u32 head;
/* If the reported head position has wrapped or hasn't advanced,
* fallback to the slow and accurate path.
*/
head = intel_read_status_page(ring, 4);
if (head > ring->head) {
ring->head = head;
ring->space = ring_space(ring);
if (ring->space >= n)
return 0;
}
trace_i915_ring_wait_begin(ring);
if (drm_core_check_feature(dev, DRIVER_GEM))

Просмотреть файл

@ -1304,6 +1304,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p, u32 idx,
h0 = G_038004_TEX_HEIGHT(word1) + 1;
d0 = G_038004_TEX_DEPTH(word1);
nfaces = 1;
array = 0;
switch (G_038000_DIM(word0)) {
case V_038000_SQ_TEX_DIM_1D:
case V_038000_SQ_TEX_DIM_2D:

Просмотреть файл

@ -1117,13 +1117,23 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
(connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
struct drm_display_mode *mode;
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_ON);
ret = radeon_ddc_get_modes(radeon_connector);
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_ON);
ret = radeon_ddc_get_modes(radeon_connector);
if (!radeon_dig_connector->edp_on)
atombios_set_edp_panel_power(connector,
ATOM_TRANSMITTER_ACTION_POWER_OFF);
} else {
/* need to setup ddc on the bridge */
if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
ENCODER_OBJECT_ID_NONE) {
if (encoder)
radeon_atom_ext_encoder_setup_ddc(encoder);
}
ret = radeon_ddc_get_modes(radeon_connector);
}
if (ret > 0) {
if (encoder) {
@ -1134,7 +1144,6 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
return ret;
}
encoder = radeon_best_single_encoder(connector);
if (!encoder)
return 0;

Просмотреть файл

@ -597,13 +597,13 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev,
if (bo_va == NULL)
return 0;
list_del(&bo_va->bo_list);
mutex_lock(&vm->mutex);
radeon_mutex_lock(&rdev->cs_mutex);
radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
radeon_mutex_unlock(&rdev->cs_mutex);
list_del(&bo_va->vm_list);
mutex_unlock(&vm->mutex);
list_del(&bo_va->bo_list);
kfree(bo_va);
return 0;

Просмотреть файл

@ -178,6 +178,16 @@ static inline void f75375_write16(struct i2c_client *client, u8 reg,
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
static void f75375_write_pwm(struct i2c_client *client, int nr)
{
struct f75375_data *data = i2c_get_clientdata(client);
if (data->kind == f75387)
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
else
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
}
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@ -254,6 +264,36 @@ static inline u16 rpm_to_reg(int rpm)
return 1500000 / rpm;
}
static bool duty_mode_enabled(u8 pwm_enable)
{
switch (pwm_enable) {
case 0: /* Manual, duty mode (full speed) */
case 1: /* Manual, duty mode */
case 4: /* Auto, duty mode */
return true;
case 2: /* Auto, speed mode */
case 3: /* Manual, speed mode */
return false;
default:
BUG();
}
}
static bool auto_mode_enabled(u8 pwm_enable)
{
switch (pwm_enable) {
case 0: /* Manual, duty mode (full speed) */
case 1: /* Manual, duty mode */
case 3: /* Manual, speed mode */
return false;
case 2: /* Auto, speed mode */
case 4: /* Auto, duty mode */
return true;
default:
BUG();
}
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@ -287,6 +327,11 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr,
if (err < 0)
return err;
if (auto_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
mutex_lock(&data->update_lock);
data->fan_target[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
@ -307,9 +352,13 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
if (err < 0)
return err;
if (auto_mode_enabled(data->pwm_enable[nr]) ||
!duty_mode_enabled(data->pwm_enable[nr]))
return -EINVAL;
mutex_lock(&data->update_lock);
data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
f75375_write_pwm(client, nr);
mutex_unlock(&data->update_lock);
return count;
}
@ -327,11 +376,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
struct f75375_data *data = i2c_get_clientdata(client);
u8 fanmode;
if (val < 0 || val > 3)
if (val < 0 || val > 4)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
if (data->kind == f75387) {
/* For now, deny dangerous toggling of duty mode */
if (duty_mode_enabled(data->pwm_enable[nr]) !=
duty_mode_enabled(val))
return -EOPNOTSUPP;
/* clear each fanX_mode bit before setting them properly */
fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
@ -345,12 +398,14 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
case 2: /* AUTOMATIC*/
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
case 2: /* Automatic, speed mode */
break;
case 3: /* fan speed */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
break;
case 4: /* Automatic, pwm */
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
break;
}
} else {
/* clear each fanX_mode bit before setting them properly */
@ -368,14 +423,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
break;
case 3: /* fan speed */
break;
case 4: /* Automatic pwm */
return -EINVAL;
}
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
if (val == 0)
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
f75375_write_pwm(client, nr);
return 0;
}
@ -726,14 +782,17 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
if (manu && duty)
/* speed */
if (!manu && duty)
/* auto, pwm */
data->pwm_enable[nr] = 4;
else if (manu && !duty)
/* manual, speed */
data->pwm_enable[nr] = 3;
else if (!manu && duty)
/* automatic */
else if (!manu && !duty)
/* automatic, speed */
data->pwm_enable[nr] = 2;
else
/* manual */
/* manual, pwm */
data->pwm_enable[nr] = 1;
} else {
if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
@ -758,9 +817,11 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
!duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
continue;
data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
f75375_write_pwm(client, nr);
}
}
@ -787,7 +848,7 @@ static int f75375_probe(struct i2c_client *client,
if (err)
goto exit_free;
if (data->kind == f75375) {
if (data->kind != f75373) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);

Просмотреть файл

@ -72,6 +72,7 @@
#define MXS_I2C_QUEUESTAT (0x70)
#define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000
#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F
#define MXS_I2C_QUEUECMD (0x80)
@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
int ret;
int flags;
init_completion(&i2c->cmd_complete);
dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
msg->addr, msg->len, msg->flags, stop);
if (msg->len == 0)
return -EINVAL;
init_completion(&i2c->cmd_complete);
flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
if (msg->flags & I2C_M_RD)
@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
{
struct mxs_i2c_dev *i2c = dev_id;
u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
bool is_last_cmd;
if (!stat)
return IRQ_NONE;
@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
else
i2c->cmd_err = 0;
complete(&i2c->cmd_complete);
is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
if (is_last_cmd || i2c->cmd_err)
complete(&i2c->cmd_complete);
writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
return IRQ_HANDLED;
}

Просмотреть файл

@ -44,7 +44,8 @@ static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes;
@ -67,7 +68,8 @@ static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
ssize_t bytes, rest;
@ -97,7 +99,8 @@ static ssize_t debug_write_pagetable(struct file *file,
struct iotlb_entry e;
struct cr_regs cr;
int err;
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct omap_iommu *obj = dev_to_omap_iommu(dev);
char buf[MAXCOLUMN], *p = buf;
count = min(count, sizeof(buf));
@ -184,7 +187,8 @@ out:
static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
size_t bytes;
@ -212,7 +216,8 @@ static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct omap_iommu *obj = dev_to_omap_iommu(dev);
char *p, *buf;
struct iovm_struct *tmp;
int uninitialized_var(i);
@ -254,7 +259,7 @@ static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
char *p, *buf;
struct iovm_struct *area;
ssize_t bytes;
@ -268,8 +273,8 @@ static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
mutex_lock(&iommu_debug_lock);
area = omap_find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
area = omap_find_iovm_area(dev, (u32)ppos);
if (!area) {
bytes = -EINVAL;
goto err_out;
}
@ -287,7 +292,7 @@ err_out:
static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
size_t count, loff_t *ppos)
{
struct omap_iommu *obj = file->private_data;
struct device *dev = file->private_data;
struct iovm_struct *area;
char *p, *buf;
@ -305,8 +310,8 @@ static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
goto err_out;
}
area = omap_find_iovm_area(obj, (u32)ppos);
if (IS_ERR(area)) {
area = omap_find_iovm_area(dev, (u32)ppos);
if (!area) {
count = -EINVAL;
goto err_out;
}
@ -350,7 +355,7 @@ DEBUG_FOPS(mem);
{ \
struct dentry *dent; \
dent = debugfs_create_file(#attr, mode, parent, \
obj, &debug_##attr##_fops); \
dev, &debug_##attr##_fops); \
if (!dent) \
return -ENOMEM; \
}
@ -362,20 +367,29 @@ static int iommu_debug_register(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_iommu *obj = platform_get_drvdata(pdev);
struct omap_iommu_arch_data *arch_data;
struct dentry *d, *parent;
if (!obj || !obj->dev)
return -EINVAL;
arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL);
if (!arch_data)
return -ENOMEM;
arch_data->iommu_dev = obj;
dev->archdata.iommu = arch_data;
d = debugfs_create_dir(obj->name, iommu_debug_root);
if (!d)
return -ENOMEM;
goto nomem;
parent = d;
d = debugfs_create_u8("nr_tlb_entries", 400, parent,
(u8 *)&obj->nr_tlb_entries);
if (!d)
return -ENOMEM;
goto nomem;
DEBUG_ADD_FILE_RO(ver);
DEBUG_ADD_FILE_RO(regs);
@ -384,6 +398,22 @@ static int iommu_debug_register(struct device *dev, void *data)
DEBUG_ADD_FILE_RO(mmap);
DEBUG_ADD_FILE(mem);
return 0;
nomem:
kfree(arch_data);
return -ENOMEM;
}
static int iommu_debug_unregister(struct device *dev, void *data)
{
if (!dev->archdata.iommu)
return 0;
kfree(dev->archdata.iommu);
dev->archdata.iommu = NULL;
return 0;
}
@ -411,6 +441,7 @@ module_init(iommu_debug_init)
static void __exit iommu_debugfs_exit(void)
{
debugfs_remove_recursive(iommu_debug_root);
omap_foreach_iommu_device(NULL, iommu_debug_unregister);
}
module_exit(iommu_debugfs_exit)

Просмотреть файл

@ -1223,7 +1223,8 @@ static int __init omap_iommu_init(void)
return platform_driver_register(&omap_iommu_driver);
}
module_init(omap_iommu_init);
/* must be ready before omap3isp is probed */
subsys_initcall(omap_iommu_init);
static void __exit omap_iommu_exit(void)
{

Просмотреть файл

@ -95,11 +95,16 @@ static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
}
static int sja1000_is_absent(struct sja1000_priv *priv)
{
return (priv->read_reg(priv, REG_MOD) == 0xFF);
}
static int sja1000_probe_chip(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
if (priv->reg_base && (priv->read_reg(priv, 0) == 0xFF)) {
if (priv->reg_base && sja1000_is_absent(priv)) {
printk(KERN_INFO "%s: probing @0x%lX failed\n",
DRV_NAME, dev->base_addr);
return 0;
@ -493,6 +498,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
while ((isrc = priv->read_reg(priv, REG_IR)) && (n < SJA1000_MAX_IRQ)) {
n++;
status = priv->read_reg(priv, REG_SR);
/* check for absent controller due to hw unplug */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
if (isrc & IRQ_WUI)
dev_warn(dev->dev.parent, "wakeup interrupt\n");
@ -509,6 +517,9 @@ irqreturn_t sja1000_interrupt(int irq, void *dev_id)
while (status & SR_RBS) {
sja1000_rx(dev);
status = priv->read_reg(priv, REG_SR);
/* check for absent controller */
if (status == 0xFF && sja1000_is_absent(priv))
return IRQ_NONE;
}
}
if (isrc & (IRQ_DOI | IRQ_EI | IRQ_BEI | IRQ_EPI | IRQ_ALI)) {

Просмотреть файл

@ -2244,10 +2244,6 @@ static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
dev_info(&adapter->pdev->dev, "tx locked\n");
return NETDEV_TX_LOCKED;
}
if (skb->mark == 0x01)
type = atl1c_trans_high;
else
type = atl1c_trans_normal;
if (atl1c_tpd_avail(adapter, type) < tpd_req) {
/* no enough descriptor, just stop queue */

Просмотреть файл

@ -2339,7 +2339,7 @@ static inline int __init b44_pci_init(void)
return err;
}
static inline void __exit b44_pci_exit(void)
static inline void b44_pci_exit(void)
{
#ifdef CONFIG_B44_PCI
ssb_pcihost_unregister(&b44_pci_driver);

Просмотреть файл

@ -3584,7 +3584,11 @@ static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
fl6.flowi6_oif = dst_addr->sin6_scope_id;
*dst = ip6_route_output(&init_net, NULL, &fl6);
if (*dst)
if ((*dst)->error) {
dst_release(*dst);
*dst = NULL;
return -ENETUNREACH;
} else
return 0;
#endif

Просмотреть файл

@ -157,7 +157,7 @@ static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
*fcoe_enc_error = (desc->flags &
CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
*fcoe_eof = (u8)((desc->checksum_fcoe >>
*fcoe_eof = (u8)((le16_to_cpu(desc->checksum_fcoe) >>
CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
*checksum = 0;

Просмотреть файл

@ -72,7 +72,7 @@ static int enic_set_port_profile(struct enic *enic, int vf)
struct enic_port_profile *pp;
struct vic_provinfo *vp;
const u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
const u16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
const __be16 os_type = htons(VIC_GENERIC_PROV_OS_TYPE_LINUX);
char uuid_str[38];
char client_mac_str[18];
u8 *client_mac;

Просмотреть файл

@ -2328,19 +2328,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
((new_mtu) < IPV6_MIN_MTU))
return -EINVAL;
if (new_mtu > 4000) {
jme->reg_rxcs &= ~RXCS_FIFOTHNP;
jme->reg_rxcs |= RXCS_FIFOTHNP_64QW;
jme_restart_rx_engine(jme);
} else {
jme->reg_rxcs &= ~RXCS_FIFOTHNP;
jme->reg_rxcs |= RXCS_FIFOTHNP_128QW;
jme_restart_rx_engine(jme);
}
netdev->mtu = new_mtu;
netdev_update_features(netdev);
jme_restart_rx_engine(jme);
jme_reset_link(jme);
return 0;

Просмотреть файл

@ -730,7 +730,7 @@ enum jme_rxcs_values {
RXCS_RETRYCNT_60 = 0x00000F00,
RXCS_DEFAULT = RXCS_FIFOTHTP_128T |
RXCS_FIFOTHNP_128QW |
RXCS_FIFOTHNP_16QW |
RXCS_DMAREQSZ_128B |
RXCS_RETRYGAP_256ns |
RXCS_RETRYCNT_32,

Просмотреть файл

@ -1036,7 +1036,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
struct mlx4_priv *priv = mlx4_priv(dev);
int vec = 0, err = 0, i;
spin_lock(&priv->msix_ctl.pool_lock);
mutex_lock(&priv->msix_ctl.pool_lock);
for (i = 0; !vec && i < dev->caps.comp_pool; i++) {
if (~priv->msix_ctl.pool_bm & 1ULL << i) {
priv->msix_ctl.pool_bm |= 1ULL << i;
@ -1058,7 +1058,7 @@ int mlx4_assign_eq(struct mlx4_dev *dev, char* name, int * vector)
eq_set_ci(&priv->eq_table.eq[vec], 1);
}
}
spin_unlock(&priv->msix_ctl.pool_lock);
mutex_unlock(&priv->msix_ctl.pool_lock);
if (vec) {
*vector = vec;
@ -1079,13 +1079,13 @@ void mlx4_release_eq(struct mlx4_dev *dev, int vec)
if (likely(i >= 0)) {
/*sanity check , making sure were not trying to free irq's
Belonging to a legacy EQ*/
spin_lock(&priv->msix_ctl.pool_lock);
mutex_lock(&priv->msix_ctl.pool_lock);
if (priv->msix_ctl.pool_bm & 1ULL << i) {
free_irq(priv->eq_table.eq[vec].irq,
&priv->eq_table.eq[vec]);
priv->msix_ctl.pool_bm &= ~(1ULL << i);
}
spin_unlock(&priv->msix_ctl.pool_lock);
mutex_unlock(&priv->msix_ctl.pool_lock);
}
}

Просмотреть файл

@ -531,15 +531,14 @@ int mlx4_change_port_types(struct mlx4_dev *dev,
for (port = 0; port < dev->caps.num_ports; port++) {
/* Change the port type only if the new type is different
* from the current, and not set to Auto */
if (port_types[port] != dev->caps.port_type[port + 1]) {
if (port_types[port] != dev->caps.port_type[port + 1])
change = 1;
dev->caps.port_type[port + 1] = port_types[port];
}
}
if (change) {
mlx4_unregister_device(dev);
for (port = 1; port <= dev->caps.num_ports; port++) {
mlx4_CLOSE_PORT(dev, port);
dev->caps.port_type[port] = port_types[port - 1];
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, "
@ -986,6 +985,9 @@ static int map_bf_area(struct mlx4_dev *dev)
resource_size_t bf_len;
int err = 0;
if (!dev->caps.bf_reg_size)
return -ENXIO;
bf_start = pci_resource_start(dev->pdev, 2) +
(dev->caps.num_uars << PAGE_SHIFT);
bf_len = pci_resource_len(dev->pdev, 2) -
@ -1825,7 +1827,7 @@ slave_start:
goto err_master_mfunc;
priv->msix_ctl.pool_bm = 0;
spin_lock_init(&priv->msix_ctl.pool_lock);
mutex_init(&priv->msix_ctl.pool_lock);
mlx4_enable_msi_x(dev);
if ((mlx4_is_mfunc(dev)) &&

Просмотреть файл

@ -697,7 +697,7 @@ struct mlx4_sense {
struct mlx4_msix_ctl {
u64 pool_bm;
spinlock_t pool_lock;
struct mutex pool_lock;
};
struct mlx4_steer {

Просмотреть файл

@ -1545,7 +1545,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
netdev->irq = platform_get_irq(pdev, 0);
if (netdev->irq < 0) {
if ((int)netdev->irq < 0) {
err = netdev->irq;
goto err_get_irq;
}

Просмотреть файл

@ -156,11 +156,10 @@ static int efx_init_rx_buffers_skb(struct efx_rx_queue *rx_queue)
if (unlikely(!skb))
return -ENOMEM;
/* Adjust the SKB for padding and checksum */
/* Adjust the SKB for padding */
skb_reserve(skb, NET_IP_ALIGN);
rx_buf->len = skb_len - NET_IP_ALIGN;
rx_buf->is_page = false;
skb->ip_summed = CHECKSUM_UNNECESSARY;
rx_buf->dma_addr = pci_map_single(efx->pci_dev,
skb->data, rx_buf->len,
@ -496,6 +495,7 @@ static void efx_rx_packet_gro(struct efx_channel *channel,
EFX_BUG_ON_PARANOID(!checksummed);
rx_buf->u.skb = NULL;
skb->ip_summed = CHECKSUM_UNNECESSARY;
gro_result = napi_gro_receive(napi, skb);
}

Просмотреть файл

@ -1009,7 +1009,7 @@ static void emac_rx_handler(void *token, int len, int status)
int ret;
/* free and bail if we are shutting down */
if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
if (unlikely(!netif_running(ndev))) {
dev_kfree_skb_any(skb);
return;
}
@ -1038,7 +1038,9 @@ static void emac_rx_handler(void *token, int len, int status)
recycle:
ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
skb_tailroom(skb), GFP_KERNEL);
if (WARN_ON(ret < 0))
WARN_ON(ret == -ENOMEM);
if (unlikely(ret < 0))
dev_kfree_skb_any(skb);
}

Просмотреть файл

@ -30,16 +30,16 @@
#include <asm/irq.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IC1001 PHY drivers");
MODULE_DESCRIPTION("ICPlus IP175C/IP101A/IP101G/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
/* IP101A/IP1001 */
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_APS_ON 2 /* IP101A APS Mode bit */
/* IP101A/G - IP1001 */
#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */
#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */
#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */
#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */
#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */
static int ip175c_config_init(struct phy_device *phydev)
{
@ -98,20 +98,24 @@ static int ip175c_config_init(struct phy_device *phydev)
static int ip1xx_reset(struct phy_device *phydev)
{
int err, bmcr;
int bmcr;
/* Software Reset PHY */
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
bmcr |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, bmcr);
if (err < 0)
return err;
bmcr = phy_write(phydev, MII_BMCR, bmcr);
if (bmcr < 0)
return bmcr;
do {
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
} while (bmcr & BMCR_RESET);
return err;
return 0;
}
static int ip1001_config_init(struct phy_device *phydev)
@ -124,7 +128,10 @@ static int ip1001_config_init(struct phy_device *phydev)
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP1001_SPEC_CTRL_STATUS_2);
if (c < 0)
return c;
c |= IP1001_APS_ON;
c = phy_write(phydev, IP1001_SPEC_CTRL_STATUS_2, c);
if (c < 0)
return c;
@ -132,14 +139,19 @@ static int ip1001_config_init(struct phy_device *phydev)
/* Additional delay (2ns) used to adjust RX clock phase
* at RGMII interface */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
if (c < 0)
return c;
c |= IP1001_PHASE_SEL_MASK;
c = phy_write(phydev, IP10XX_SPEC_CTRL_STATUS, c);
if (c < 0)
return c;
}
return c;
return 0;
}
static int ip101a_config_init(struct phy_device *phydev)
static int ip101a_g_config_init(struct phy_device *phydev)
{
int c;
@ -149,7 +161,7 @@ static int ip101a_config_init(struct phy_device *phydev)
/* Enable Auto Power Saving mode */
c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
c |= IP101A_APS_ON;
c |= IP101A_G_APS_ON;
return c;
}
@ -191,6 +203,7 @@ static struct phy_driver ip1001_driver = {
.phy_id_mask = 0x0ffffff0,
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.flags = PHY_HAS_INTERRUPT,
.config_init = &ip1001_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
@ -199,13 +212,14 @@ static struct phy_driver ip1001_driver = {
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver ip101a_driver = {
static struct phy_driver ip101a_g_driver = {
.phy_id = 0x02430c54,
.name = "ICPlus IP101A",
.name = "ICPlus IP101A/G",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause,
.config_init = &ip101a_config_init,
.flags = PHY_HAS_INTERRUPT,
.config_init = &ip101a_g_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.suspend = genphy_suspend,
@ -221,7 +235,7 @@ static int __init icplus_init(void)
if (ret < 0)
return -ENODEV;
ret = phy_driver_register(&ip101a_driver);
ret = phy_driver_register(&ip101a_g_driver);
if (ret < 0)
return -ENODEV;
@ -231,7 +245,7 @@ static int __init icplus_init(void)
static void __exit icplus_exit(void)
{
phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip101a_driver);
phy_driver_unregister(&ip101a_g_driver);
phy_driver_unregister(&ip175c_driver);
}
@ -241,6 +255,7 @@ module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
{ 0x02430d90, 0x0ffffff0 },
{ 0x02430c54, 0x0ffffff0 },
{ }
};

Просмотреть файл

@ -2024,14 +2024,22 @@ ppp_mp_reconstruct(struct ppp *ppp)
continue;
}
if (PPP_MP_CB(p)->sequence != seq) {
u32 oldseq;
/* Fragment `seq' is missing. If it is after
minseq, it might arrive later, so stop here. */
if (seq_after(seq, minseq))
break;
/* Fragment `seq' is lost, keep going. */
lost = 1;
oldseq = seq;
seq = seq_before(minseq, PPP_MP_CB(p)->sequence)?
minseq + 1: PPP_MP_CB(p)->sequence;
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"lost frag %u..%u\n",
oldseq, seq-1);
goto again;
}
@ -2076,6 +2084,10 @@ ppp_mp_reconstruct(struct ppp *ppp)
struct sk_buff *tmp2;
skb_queue_reverse_walk_from_safe(list, p, tmp2) {
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"discarding frag %u\n",
PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
@ -2091,6 +2103,17 @@ ppp_mp_reconstruct(struct ppp *ppp)
/* If we have discarded any fragments,
signal a receive error. */
if (PPP_MP_CB(head)->sequence != ppp->nextseq) {
skb_queue_walk_safe(list, p, tmp) {
if (p == head)
break;
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
"discarding frag %u\n",
PPP_MP_CB(p)->sequence);
__skb_unlink(p, list);
kfree_skb(p);
}
if (ppp->debug & 1)
netdev_printk(KERN_DEBUG, ppp->dev,
" missed pkts %u..%u\n",

Просмотреть файл

@ -573,6 +573,13 @@ static const struct usb_device_id products [] = {
.driver_info = 0,
},
/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
{
USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = 0,
},
/*
* WHITELIST!!!
*

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше