diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 000000000000..841a3d284bbf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIECFG controller + +maintainers: + - Chuanjia Liu + - Jianjun Wang + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 7468d666763a..57ae73462272 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -8,7 +8,7 @@ Required properties: "mediatek,mt7623-pcie" "mediatek,mt7629-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg: Base addresses and lengths of the root ports. - reg-names: Names of the above areas to use during resource lookup. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) @@ -47,9 +47,12 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. -Required properties for MT2712/MT7622: +Required properties for MT2712/MT7622/MT7629: -interrupts: A list of interrupt outputs of the controller, must have one entry for each PCIe port +- interrupt-names: Must include the following entries: + - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received +- linux,pci-domain: PCI domain ID. Should be unique for each host controller In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -143,130 +146,143 @@ Examples for MT7623: Examples for MT2712: - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; Examples for MT7622: - pcie: pcie@1a140000 { + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 4cb5ea8e1069..2f3f974977a3 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -23,6 +24,7 @@ #include #include #include +#include #include #include "../pci.h" @@ -207,6 +209,7 @@ struct mtk_pcie_port { * struct mtk_pcie - PCIe host information * @dev: pointer to PCIe device * @base: IO mapped register base + * @cfg: IO mapped register map for PCIe config * @free_ck: free-run reference clock * @mem: non-prefetchable memory resource * @ports: pointer to PCIe port information @@ -215,6 +218,7 @@ struct mtk_pcie_port { struct mtk_pcie { struct device *dev; void __iomem *base; + struct regmap *cfg; struct clk *free_ck; struct list_head ports; @@ -646,7 +650,11 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port, return err; } - port->irq = platform_get_irq(pdev, port->slot); + if (of_find_property(dev->of_node, "interrupt-names", NULL)) + port->irq = platform_get_irq_byname(pdev, "pcie_irq"); + else + port->irq = platform_get_irq(pdev, port->slot); + if (port->irq < 0) return port->irq; @@ -678,6 +686,10 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) val |= PCIE_CSR_LTSSM_EN(port->slot) | PCIE_CSR_ASPM_L1_EN(port->slot); writel(val, pcie->base + PCIE_SYS_CFG_V2); + } else if (pcie->cfg) { + val = PCIE_CSR_LTSSM_EN(port->slot) | + PCIE_CSR_ASPM_L1_EN(port->slot); + regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val); } /* Assert all reset signals */ @@ -981,6 +993,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) struct device *dev = pcie->dev; struct platform_device *pdev = to_platform_device(dev); struct resource *regs; + struct device_node *cfg_node; int err; /* get shared registers, which are optional */ @@ -991,6 +1004,14 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) return PTR_ERR(pcie->base); } + cfg_node = of_find_compatible_node(NULL, NULL, + "mediatek,generic-pciecfg"); + if (cfg_node) { + pcie->cfg = syscon_node_to_regmap(cfg_node); + if (IS_ERR(pcie->cfg)) + return PTR_ERR(pcie->cfg); + } + pcie->free_ck = devm_clk_get(dev, "free_ck"); if (IS_ERR(pcie->free_ck)) { if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER) @@ -1023,22 +1044,27 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie) struct device *dev = pcie->dev; struct device_node *node = dev->of_node, *child; struct mtk_pcie_port *port, *tmp; - int err; + int err, slot; - for_each_available_child_of_node(node, child) { - int slot; + slot = of_get_pci_domain_nr(dev->of_node); + if (slot < 0) { + for_each_available_child_of_node(node, child) { + err = of_pci_get_devfn(child); + if (err < 0) { + dev_err(dev, "failed to get devfn: %d\n", err); + goto error_put_node; + } - err = of_pci_get_devfn(child); - if (err < 0) { - dev_err(dev, "failed to parse devfn: %d\n", err); - goto error_put_node; + slot = PCI_SLOT(err); + + err = mtk_pcie_parse_port(pcie, child, slot); + if (err) + goto error_put_node; } - - slot = PCI_SLOT(err); - - err = mtk_pcie_parse_port(pcie, child, slot); + } else { + err = mtk_pcie_parse_port(pcie, node, slot); if (err) - goto error_put_node; + return err; } err = mtk_pcie_subsys_powerup(pcie);