From aa6eca5b81663a59e1a8765481eb48fa2edfab05 Mon Sep 17 00:00:00 2001 From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:55 +0800 Subject: [PATCH 1/4] dt-bindings: PCI: mediatek: Update the Device tree bindings There are two independent PCIe controllers in MT2712 and MT7622 platform. Each of them should contain an independent MSI domain. In old dts architecture, MSI domain will be inherited from the root bridge, and all of the devices will share the same MSI domain. Hence that, the PCIe devices will not work properly if the irq number which required is more than 32. Split the PCIe node for MT2712 and MT7622 platform to comply with the hardware design and fix MSI issue. Link: https://lore.kernel.org/r/20210823032800.1660-2-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring Acked-by: Ryder Lee --- .../bindings/pci/mediatek-pcie-cfg.yaml | 39 ++++ .../devicetree/bindings/pci/mediatek-pcie.txt | 212 ++++++++++-------- 2 files changed, 153 insertions(+), 98 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 000000000000..841a3d284bbf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PCIECFG controller + +maintainers: + - Chuanjia Liu + - Jianjun Wang + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 7468d666763a..57ae73462272 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -8,7 +8,7 @@ Required properties: "mediatek,mt7623-pcie" "mediatek,mt7629-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg: Base addresses and lengths of the root ports. - reg-names: Names of the above areas to use during resource lookup. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) @@ -47,9 +47,12 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. -Required properties for MT2712/MT7622: +Required properties for MT2712/MT7622/MT7629: -interrupts: A list of interrupt outputs of the controller, must have one entry for each PCIe port +- interrupt-names: Must include the following entries: + - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received +- linux,pci-domain: PCI domain ID. Should be unique for each host controller In addition, the device tree node must have sub-nodes describing each PCIe port interface, having the following mandatory properties: @@ -143,130 +146,143 @@ Examples for MT7623: Examples for MT2712: - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; Examples for MT7622: - pcie: pcie@1a140000 { + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; #address-cells = <3>; #size-cells = <2>; - interrupts = , - ; + interrupts = ; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; }; }; From 87e8657ba99cac87b84c7f8ead91b44d88345504 Mon Sep 17 00:00:00 2001 From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:56 +0800 Subject: [PATCH 2/4] PCI: mediatek: Add new method to get shared pcie-cfg base address For the new dts format, add a new method to get shared pcie-cfg base address and use it to configure the PCIECFG controller Link: https://lore.kernel.org/r/20210823032800.1660-3-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu Signed-off-by: Lorenzo Pieralisi Acked-by: Ryder Lee --- drivers/pci/controller/pcie-mediatek.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 25bee693834f..4296d9e04240 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -23,6 +24,7 @@ #include #include #include +#include #include #include "../pci.h" @@ -207,6 +209,7 @@ struct mtk_pcie_port { * struct mtk_pcie - PCIe host information * @dev: pointer to PCIe device * @base: IO mapped register base + * @cfg: IO mapped register map for PCIe config * @free_ck: free-run reference clock * @mem: non-prefetchable memory resource * @ports: pointer to PCIe port information @@ -215,6 +218,7 @@ struct mtk_pcie_port { struct mtk_pcie { struct device *dev; void __iomem *base; + struct regmap *cfg; struct clk *free_ck; struct list_head ports; @@ -682,6 +686,10 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port) val |= PCIE_CSR_LTSSM_EN(port->slot) | PCIE_CSR_ASPM_L1_EN(port->slot); writel(val, pcie->base + PCIE_SYS_CFG_V2); + } else if (pcie->cfg) { + val = PCIE_CSR_LTSSM_EN(port->slot) | + PCIE_CSR_ASPM_L1_EN(port->slot); + regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val); } /* Assert all reset signals */ @@ -985,6 +993,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) struct device *dev = pcie->dev; struct platform_device *pdev = to_platform_device(dev); struct resource *regs; + struct device_node *cfg_node; int err; /* get shared registers, which are optional */ @@ -995,6 +1004,14 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) return PTR_ERR(pcie->base); } + cfg_node = of_find_compatible_node(NULL, NULL, + "mediatek,generic-pciecfg"); + if (cfg_node) { + pcie->cfg = syscon_node_to_regmap(cfg_node); + if (IS_ERR(pcie->cfg)) + return PTR_ERR(pcie->cfg); + } + pcie->free_ck = devm_clk_get(dev, "free_ck"); if (IS_ERR(pcie->free_ck)) { if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER) From 436960bb0045854119a61efab20578f55b311a87 Mon Sep 17 00:00:00 2001 From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:57 +0800 Subject: [PATCH 3/4] PCI: mediatek: Add new method to get irq number Use platform_get_irq_byname() to get the irq number if the "interrupt-names" property is defined. Link: https://lore.kernel.org/r/20210823032800.1660-4-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Ryder Lee --- drivers/pci/controller/pcie-mediatek.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 4296d9e04240..19e35ac62d43 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -654,7 +654,11 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port, return err; } - port->irq = platform_get_irq(pdev, port->slot); + if (of_find_property(dev->of_node, "interrupt-names", NULL)) + port->irq = platform_get_irq_byname(pdev, "pcie_irq"); + else + port->irq = platform_get_irq(pdev, port->slot); + if (port->irq < 0) return port->irq; From 77216702c8f6288f948ee230772b4612b835c5d6 Mon Sep 17 00:00:00 2001 From: Chuanjia Liu Date: Mon, 23 Aug 2021 11:27:58 +0800 Subject: [PATCH 4/4] PCI: mediatek: Use PCI domain to handle ports detection Use of_get_pci_domain_nr() to get the pci domain. If the "linux,pci-domain" property is present, we assume that the PCIe bridge is an individual bridge, hence we only need to parse one port. Link: https://lore.kernel.org/r/20210823032800.1660-5-chuanjia.liu@mediatek.com Signed-off-by: Chuanjia Liu [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Ryder Lee --- drivers/pci/controller/pcie-mediatek.c | 29 +++++++++++++++----------- 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 19e35ac62d43..928e0983a900 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -1048,22 +1048,27 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie) struct device *dev = pcie->dev; struct device_node *node = dev->of_node, *child; struct mtk_pcie_port *port, *tmp; - int err; + int err, slot; - for_each_available_child_of_node(node, child) { - int slot; + slot = of_get_pci_domain_nr(dev->of_node); + if (slot < 0) { + for_each_available_child_of_node(node, child) { + err = of_pci_get_devfn(child); + if (err < 0) { + dev_err(dev, "failed to get devfn: %d\n", err); + goto error_put_node; + } - err = of_pci_get_devfn(child); - if (err < 0) { - dev_err(dev, "failed to parse devfn: %d\n", err); - goto error_put_node; + slot = PCI_SLOT(err); + + err = mtk_pcie_parse_port(pcie, child, slot); + if (err) + goto error_put_node; } - - slot = PCI_SLOT(err); - - err = mtk_pcie_parse_port(pcie, child, slot); + } else { + err = mtk_pcie_parse_port(pcie, node, slot); if (err) - goto error_put_node; + return err; } err = mtk_pcie_subsys_powerup(pcie);