usb: gadget: pxa25x_udc: move register definitions from arch

ixp4xx and pxa25x both use this driver and provide a slightly
different set of register definitions for it. Aside from that,
the definition in the ixp4xx-regs.h header conflicts with the
on in the pxa27x device driver when compile-testing that:

In file included from ../drivers/usb/gadget/udc/pxa27x_udc.c:37:0:
../drivers/usb/gadget/udc/pxa27x_udc.h:26:0: warning: "UDCCR" redefined
 #define UDCCR  0x0000  /* UDC Control Register */
 ^
In file included from ../arch/arm/mach-ixp4xx/include/mach/hardware.h:27:0,
                 from ../arch/arm/mach-ixp4xx/include/mach/io.h:18,
                 from ../arch/arm/include/asm/io.h:194,
                 from ../include/linux/io.h:25,
                 from ../include/linux/irq.h:24,
                 from ../drivers/usb/gadget/udc/pxa27x_udc.c:23:
../arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h:415:0: note: this is the location of the previous definition
 #define UDCCR  IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)

This addresses both issues by moving all the definitions into the
pxa25x_udc driver itself. It turns out the only difference between
them was 'UDCCS_IO_ROF', and that could well be a mistake when it
was incorrectly copied from pxa25x to ixp4xx.

Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This commit is contained in:
Arnd Bergmann 2016-01-28 17:17:02 +01:00 коммит произвёл Felipe Balbi
Родитель 21a596c17b
Коммит c5418a0b98
3 изменённых файлов: 155 добавлений и 367 удалений

Просмотреть файл

@ -395,204 +395,6 @@
#define CRP_AD_CBE_BESL 20
#define CRP_AD_CBE_WRITE 0x00010000
/*
* USB Device Controller
*
* These are used by the USB gadget driver, so they don't follow the
* IXP4XX_ naming convetions.
*
*/
# define IXP4XX_USB_REG(x) (*((volatile u32 *)(x)))
/* UDC Undocumented - Reserved1 */
#define UDC_RES1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)
/* UDC Undocumented - Reserved2 */
#define UDC_RES2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)
/* UDC Undocumented - Reserved3 */
#define UDC_RES3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)
/* UDC Control Register */
#define UDCCR IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)
/* UDC Endpoint 0 Control/Status Register */
#define UDCCS0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)
/* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)
/* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)
/* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)
/* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)
/* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)
/* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)
/* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)
/* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)
/* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)
/* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)
/* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)
/* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)
/* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)
/* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)
/* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)
/* UDC Frame Number Register High */
#define UFNRH IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)
/* UDC Frame Number Register Low */
#define UFNRL IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)
/* UDC Byte Count Reg 2 */
#define UBCR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)
/* UDC Byte Count Reg 4 */
#define UBCR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)
/* UDC Byte Count Reg 7 */
#define UBCR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)
/* UDC Byte Count Reg 9 */
#define UBCR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)
/* UDC Byte Count Reg 12 */
#define UBCR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)
/* UDC Byte Count Reg 14 */
#define UBCR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)
/* UDC Endpoint 0 Data Register */
#define UDDR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)
/* UDC Endpoint 1 Data Register */
#define UDDR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)
/* UDC Endpoint 2 Data Register */
#define UDDR2 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)
/* UDC Endpoint 3 Data Register */
#define UDDR3 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)
/* UDC Endpoint 4 Data Register */
#define UDDR4 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)
/* UDC Endpoint 5 Data Register */
#define UDDR5 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)
/* UDC Endpoint 6 Data Register */
#define UDDR6 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)
/* UDC Endpoint 7 Data Register */
#define UDDR7 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)
/* UDC Endpoint 8 Data Register */
#define UDDR8 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)
/* UDC Endpoint 9 Data Register */
#define UDDR9 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)
/* UDC Endpoint 10 Data Register */
#define UDDR10 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)
/* UDC Endpoint 11 Data Register */
#define UDDR11 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)
/* UDC Endpoint 12 Data Register */
#define UDDR12 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)
/* UDC Endpoint 13 Data Register */
#define UDDR13 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)
/* UDC Endpoint 14 Data Register */
#define UDDR14 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)
/* UDC Endpoint 15 Data Register */
#define UDDR15 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)
/* UDC Interrupt Control Register 0 */
#define UICR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)
/* UDC Interrupt Control Register 1 */
#define UICR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)
/* UDC Status Interrupt Register 0 */
#define USIR0 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)
/* UDC Status Interrupt Register 1 */
#define USIR1 IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/* "fuse" bits of IXP_EXP_CFG2 */

Просмотреть файл

@ -1,163 +0,0 @@
#ifndef _ASM_ARCH_PXA25X_UDC_H
#define _ASM_ARCH_PXA25X_UDC_H
#ifdef _ASM_ARCH_PXA27X_UDC_H
#error "You can't include both PXA25x and PXA27x UDC support"
#endif
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
#define UDCCR __REG(0x40600000) /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
#endif

Просмотреть файл

@ -48,18 +48,167 @@
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
/*
* This driver is PXA25x only. Grab the right register definitions.
*/
#ifdef CONFIG_ARCH_PXA
#include <mach/pxa25x-udc.h>
#include <mach/hardware.h>
#endif
#ifdef CONFIG_ARCH_LUBBOCK
#include <mach/lubbock.h>
#endif
#ifdef CONFIG_ARCH_IXP4XX
#define __UDC_REG(x) (*((volatile u32 *)(IXP4XX_USB_BASE_VIRT + (x))))
#endif
#ifdef CONFIG_ARCH_PXA
#define __UDC_REG(x) __REG(0x40600000 + (x))
#endif
#define UDCCR __UDC_REG(0x0000) /* UDC Control Register */
#define UDC_RES1 __UDC_REG(0x0004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __UDC_REG(0x0008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __UDC_REG(0x000C) /* UDC Undocumented - Reserved3 */
#define UDCCS0 __UDC_REG(0x0010) /* UDC Endpoint 0 Control/Status Register */
#define UDCCS1 __UDC_REG(0x0014) /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS2 __UDC_REG(0x0018) /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS3 __UDC_REG(0x001C) /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS4 __UDC_REG(0x0020) /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS5 __UDC_REG(0x0024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS6 __UDC_REG(0x0028) /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS7 __UDC_REG(0x002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS8 __UDC_REG(0x0030) /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS9 __UDC_REG(0x0034) /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS10 __UDC_REG(0x0038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS11 __UDC_REG(0x003C) /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS12 __UDC_REG(0x0040) /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS13 __UDC_REG(0x0044) /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS14 __UDC_REG(0x0048) /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS15 __UDC_REG(0x004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UFNRH __UDC_REG(0x0060) /* UDC Frame Number Register High */
#define UFNRL __UDC_REG(0x0064) /* UDC Frame Number Register Low */
#define UBCR2 __UDC_REG(0x0068) /* UDC Byte Count Reg 2 */
#define UBCR4 __UDC_REG(0x006c) /* UDC Byte Count Reg 4 */
#define UBCR7 __UDC_REG(0x0070) /* UDC Byte Count Reg 7 */
#define UBCR9 __UDC_REG(0x0074) /* UDC Byte Count Reg 9 */
#define UBCR12 __UDC_REG(0x0078) /* UDC Byte Count Reg 12 */
#define UBCR14 __UDC_REG(0x007c) /* UDC Byte Count Reg 14 */
#define UDDR0 __UDC_REG(0x0080) /* UDC Endpoint 0 Data Register */
#define UDDR1 __UDC_REG(0x0100) /* UDC Endpoint 1 Data Register */
#define UDDR2 __UDC_REG(0x0180) /* UDC Endpoint 2 Data Register */
#define UDDR3 __UDC_REG(0x0200) /* UDC Endpoint 3 Data Register */
#define UDDR4 __UDC_REG(0x0400) /* UDC Endpoint 4 Data Register */
#define UDDR5 __UDC_REG(0x00A0) /* UDC Endpoint 5 Data Register */
#define UDDR6 __UDC_REG(0x0600) /* UDC Endpoint 6 Data Register */
#define UDDR7 __UDC_REG(0x0680) /* UDC Endpoint 7 Data Register */
#define UDDR8 __UDC_REG(0x0700) /* UDC Endpoint 8 Data Register */
#define UDDR9 __UDC_REG(0x0900) /* UDC Endpoint 9 Data Register */
#define UDDR10 __UDC_REG(0x00C0) /* UDC Endpoint 10 Data Register */
#define UDDR11 __UDC_REG(0x0B00) /* UDC Endpoint 11 Data Register */
#define UDDR12 __UDC_REG(0x0B80) /* UDC Endpoint 12 Data Register */
#define UDDR13 __UDC_REG(0x0C00) /* UDC Endpoint 13 Data Register */
#define UDDR14 __UDC_REG(0x0E00) /* UDC Endpoint 14 Data Register */
#define UDDR15 __UDC_REG(0x00E0) /* UDC Endpoint 15 Data Register */
#define UICR0 __UDC_REG(0x0050) /* UDC Interrupt Control Register 0 */
#define UICR1 __UDC_REG(0x0054) /* UDC Interrupt Control Register 1 */
#define USIR0 __UDC_REG(0x0058) /* UDC Status Interrupt Register 0 */
#define USIR1 __UDC_REG(0x005C) /* UDC Status Interrupt Register 1 */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#ifdef CONFIG_ARCH_IXP4XX /* FIXME: is this right?, datasheed says '2' */
#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */
#endif
#ifdef CONFIG_ARCH_PXA
#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
#endif
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
/*
* This driver handles the USB Device Controller (UDC) in Intel's PXA 25x
* series processors. The UDC for the IXP 4xx series is very similar.