microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (22 commits)
  [SCSI] ibmvfc: Driver version 1.0.2
  [SCSI] ibmvfc: Add details to async event log
  [SCSI] ibmvfc: Sanitize response lengths
  [SCSI] ibmvfc: Fix for lost async events
  [SCSI] ibmvfc: Fixup host state during reinit
  [SCSI] ibmvfc: Fix another hang on module removal
  [SCSI] ibmvscsi: Fixup desired DMA value for shared memory partitions
  [SCSI] megaraid_sas: remove sysfs dbg_lvl world writeable permissions
  [SCSI] qla2xxx: Update version number to 8.02.01-k7.
  [SCSI] qla2xxx: Explicitly tear-down vports during PCI remove_one().
  [SCSI] qla2xxx: Reference proper ha during SBR handling.
  [SCSI] qla2xxx: Set npiv_supported flag for FCoE HBAs.
  [SCSI] qla2xxx: Don't leak SG-DMA mappings while aborting commands.
  [SCSI] qla2xxx: Correct vport-state management issues during ISP-ABORT.
  [SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
  [SCSI] scsi_dh: Initialize lun_state in check_ownership()
  [SCSI] scsi_dh: Do not use scsilun in rdac hardware handler
  [SCSI] megaraid_sas: version and Documentation Update
  [SCSI] megaraid_sas: add new controllers (0x78 0x79)
  [SCSI] megaraid_sas: add the shutdown DCMD cmd to driver shutdown routine
  ...
This commit is contained in:
Linus Torvalds 2008-08-20 08:42:53 -07:00
Родитель 5f22ca9b13 7d0e367ab3
Коммит c5b0079c0a
15 изменённых файлов: 214 добавлений и 43 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

23
Documentation/scsi/ChangeLog.megaraid_sas
Просмотреть файл

@ -1,3 +1,26 @@
1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro
Bo Yang
2 Current Version : 00.00.04.01
3 Older Version : 00.00.03.22
1. Add the new controller (0078, 0079) support to the driver
Those controllers are LSI's next generatation(gen2) SAS controllers.
1 Release Date : Mon.June. 23 10:12:45 PST 2008 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro
Bo Yang
2 Current Version : 00.00.03.22
3 Older Version : 00.00.03.20
1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro

3
drivers/scsi/device_handler/scsi_dh_rdac.c
Просмотреть файл

@ -376,7 +376,7 @@ static int get_lun(struct scsi_device *sdev, struct rdac_dh_data *h)
if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
return SCSI_DH_NOSYS;
h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
h->lun = inqp->lun[7]; /* Uses only the last byte */
}
return err;
}
@ -386,6 +386,7 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
int err;
struct c9_inquiry *inqp;
h->lun_state = RDAC_LUN_UNOWNED;
err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
if (err == SCSI_DH_OK) {
inqp = &h->inq.c9;

37
drivers/scsi/ibmvscsi/ibmvfc.c
Просмотреть файл

@ -556,11 +556,12 @@ static void ibmvfc_link_down(struct ibmvfc_host *vhost,
/**
* ibmvfc_init_host - Start host initialization
* @vhost: ibmvfc host struct
* @relogin: is this a re-login?
*
* Return value:
* nothing
**/
static void ibmvfc_init_host(struct ibmvfc_host *vhost)
static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
{
struct ibmvfc_target *tgt;
@ -574,6 +575,11 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
}
if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
if (!relogin) {
memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
vhost->async_crq.cur = 0;
}
list_for_each_entry(tgt, &vhost->targets, queue)
tgt->need_login = 1;
scsi_block_requests(vhost->host);
@ -1059,9 +1065,10 @@ static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
{
long timeout = wait_event_timeout(vhost->init_wait_q,
(vhost->state == IBMVFC_ACTIVE ||
vhost->state == IBMVFC_HOST_OFFLINE ||
vhost->state == IBMVFC_LINK_DEAD),
((vhost->state == IBMVFC_ACTIVE ||
vhost->state == IBMVFC_HOST_OFFLINE ||
vhost->state == IBMVFC_LINK_DEAD) &&
vhost->action == IBMVFC_HOST_ACTION_NONE),
(init_timeout * HZ));
return timeout ? 0 : -EIO;
@ -1450,8 +1457,8 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
struct scsi_cmnd *cmnd = evt->cmnd;
int rsp_len = 0;
int sense_len = rsp->fcp_sense_len;
u32 rsp_len = 0;
u32 sense_len = rsp->fcp_sense_len;
if (cmnd) {
if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
@ -1468,7 +1475,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
rsp_len = rsp->fcp_rsp_len;
if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
ibmvfc_log_error(evt);
@ -2077,17 +2084,18 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
{
const char *desc = ibmvfc_get_ae_desc(crq->event);
ibmvfc_log(vhost, 3, "%s event received\n", desc);
ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
" node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
switch (crq->event) {
case IBMVFC_AE_LINK_UP:
case IBMVFC_AE_RESUME:
vhost->events_to_log |= IBMVFC_AE_LINKUP;
ibmvfc_init_host(vhost);
ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_FABRIC:
vhost->events_to_log |= IBMVFC_AE_RSCN;
ibmvfc_init_host(vhost);
ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_NPORT:
case IBMVFC_AE_SCN_GROUP:
@ -2133,13 +2141,13 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
/* Send back a response */
rc = ibmvfc_send_crq_init_complete(vhost);
if (rc == 0)
ibmvfc_init_host(vhost);
ibmvfc_init_host(vhost, 0);
else
dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
break;
case IBMVFC_CRQ_INIT_COMPLETE:
dev_info(vhost->dev, "Partner initialization complete\n");
ibmvfc_init_host(vhost);
ibmvfc_init_host(vhost, 0);
break;
default:
dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
@ -3357,8 +3365,6 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
mad->buffer.va = vhost->login_buf_dma;
mad->buffer.len = sizeof(*vhost->login_buf);
memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
vhost->async_crq.cur = 0;
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
if (!ibmvfc_send_event(evt, vhost, default_timeout))
@ -3601,8 +3607,9 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
}
}
if (vhost->reinit) {
if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
vhost->reinit = 0;
scsi_block_requests(vhost->host);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
} else {
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);

4
drivers/scsi/ibmvscsi/ibmvfc.h
Просмотреть файл

@ -29,8 +29,8 @@
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
#define IBMVFC_DRIVER_VERSION "1.0.1"
#define IBMVFC_DRIVER_DATE "(July 11, 2008)"
#define IBMVFC_DRIVER_VERSION "1.0.2"
#define IBMVFC_DRIVER_DATE "(August 14, 2008)"
#define IBMVFC_DEFAULT_TIMEOUT 15
#define IBMVFC_INIT_TIMEOUT 30

2
drivers/scsi/ibmvscsi/ibmvscsi.c
Просмотреть файл

@ -1636,7 +1636,7 @@ static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
/* add io space for sg data */
desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
IBMVSCSI_CMDS_PER_LUN_DEFAULT);
return desired_io;

119
drivers/scsi/megaraid/megaraid_sas.c
Просмотреть файл

@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
* Version : v00.00.03.20-rc1
* Version : v00.00.04.01-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = {
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
/* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
/* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@ -198,6 +202,9 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
*/
writel(status, &regs->outbound_intr_status);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_status);
return 0;
}
@ -293,6 +300,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
*/
writel(status, &regs->outbound_doorbell_clear);
/* Dummy readl to force pci flush */
readl(&regs->outbound_doorbell_clear);
return 0;
}
/**
@ -317,6 +327,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
};
/**
* The following functions are defined for gen2 (deviceid : 0x78 0x79)
* controllers
*/
/**
* megasas_enable_intr_gen2 - Enables interrupts
* @regs: MFI register set
*/
static inline void
megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
{
writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
/* write ~0x00000005 (4 & 1) to the intr mask*/
writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_disable_intr_gen2 - Disables interrupt
* @regs: MFI register set
*/
static inline void
megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
{
u32 mask = 0xFFFFFFFF;
writel(mask, &regs->outbound_intr_mask);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_mask);
}
/**
* megasas_read_fw_status_reg_gen2 - returns the current FW status value
* @regs: MFI register set
*/
static u32
megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
{
return readl(&(regs)->outbound_scratch_pad);
}
/**
* megasas_clear_interrupt_gen2 - Check & clear interrupt
* @regs: MFI register set
*/
static int
megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
{
u32 status;
/*
* Check if it is our interrupt
*/
status = readl(&regs->outbound_intr_status);
if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
return 1;
/*
* Clear the interrupt by writing back the same value
*/
writel(status, &regs->outbound_doorbell_clear);
/* Dummy readl to force pci flush */
readl(&regs->outbound_intr_status);
return 0;
}
/**
* megasas_fire_cmd_gen2 - Sends command to the FW
* @frame_phys_addr : Physical address of cmd
* @frame_count : Number of frames for the command
* @regs : MFI register set
*/
static inline void
megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
struct megasas_register_set __iomem *regs)
{
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
}
static struct megasas_instance_template megasas_instance_template_gen2 = {
.fire_cmd = megasas_fire_cmd_gen2,
.enable_intr = megasas_enable_intr_gen2,
.disable_intr = megasas_disable_intr_gen2,
.clear_intr = megasas_clear_intr_gen2,
.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
};
/**
* This is the end of set of functions & definitions
* specific to ppc (deviceid : 0x60) controllers
@ -1976,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance)
/*
* Map the message registers
*/
instance->base_addr = pci_resource_start(instance->pdev, 0);
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
instance->base_addr = pci_resource_start(instance->pdev, 1);
} else {
instance->base_addr = pci_resource_start(instance->pdev, 0);
}
if (pci_request_regions(instance->pdev, "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
@ -1998,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
case PCI_DEVICE_ID_LSI_SAS1078DE:
instance->instancet = &megasas_instance_template_ppc;
break;
case PCI_DEVICE_ID_LSI_SAS1078GEN2:
case PCI_DEVICE_ID_LSI_SAS0079GEN2:
instance->instancet = &megasas_instance_template_gen2;
break;
case PCI_DEVICE_ID_LSI_SAS1064R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
@ -2857,6 +2969,7 @@ static void megasas_shutdown(struct pci_dev *pdev)
{
struct megasas_instance *instance = pci_get_drvdata(pdev);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
}
/**
@ -3292,7 +3405,7 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun
return retval;
}
static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
megasas_sysfs_set_dbg_lvl);
static ssize_t

10
drivers/scsi/megaraid/megaraid_sas.h
Просмотреть файл

@ -18,9 +18,9 @@
/*
* MegaRAID SAS Driver meta data
*/
#define MEGASAS_VERSION "00.00.03.20-rc1"
#define MEGASAS_RELDATE "March 10, 2008"
#define MEGASAS_EXT_VERSION "Mon. March 10 11:02:31 PDT 2008"
#define MEGASAS_VERSION "00.00.04.01"
#define MEGASAS_RELDATE "July 24, 2008"
#define MEGASAS_EXT_VERSION "Thu July 24 11:41:51 PST 2008"
/*
* Device IDs
@ -28,6 +28,8 @@
#define PCI_DEVICE_ID_LSI_SAS1078R 0x0060
#define PCI_DEVICE_ID_LSI_SAS1078DE 0x007C
#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413
#define PCI_DEVICE_ID_LSI_SAS1078GEN2 0x0078
#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
/*
* =====================================
@ -580,6 +582,8 @@ struct megasas_ctrl_info {
#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10)
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001
#define MFI_GEN2_ENABLE_INTERRUPT_MASK (0x00000001 | 0x00000004)
/*
* register set for both 1068 and 1078 controllers

11
drivers/scsi/qla2xxx/qla_attr.c
Просмотреть файл

@ -993,6 +993,17 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
/*
* At this point all fcport's software-states are cleared. Perform any
* final cleanup of firmware resources (PCBs and XCBs).
*/
if (fcport->loop_id != FC_NO_LOOP_ID) {
fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
qla2x00_abort_fcport_cmds(fcport);
scsi_target_unblock(&rport->dev);
}

1
drivers/scsi/qla2xxx/qla_def.h
Просмотреть файл

@ -2237,6 +2237,7 @@ typedef struct scsi_qla_host {
#define REGISTER_FDMI_NEEDED 26
#define FCPORT_UPDATE_NEEDED 27
#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
#define UNLOADING 29
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0

8
drivers/scsi/qla2xxx/qla_init.c
Просмотреть файл

@ -976,8 +976,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
&ha->fw_attributes, &ha->fw_memory_size);
qla2x00_resize_request_q(ha);
ha->flags.npiv_supported = 0;
if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
(ha->fw_attributes & BIT_2)) {
if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
IS_QLA84XX(ha)) &&
(ha->fw_attributes & BIT_2)) {
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
((ha->max_npiv_vports + 1) %
@ -3251,6 +3252,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
{
int rval;
uint8_t status = 0;
scsi_qla_host_t *vha;
if (ha->flags.online) {
ha->flags.online = 0;
@ -3265,6 +3267,8 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(ha, 0);
list_for_each_entry(vha, &ha->vp_list, vp_list)
qla2x00_mark_all_devices_lost(vha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,

14
drivers/scsi/qla2xxx/qla_isr.c
Просмотреть файл

@ -879,11 +879,12 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
sp->ha->status_srb = sp;
sp->fcport->ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
"cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, cp, cp->serial_number));
"cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
cp->device->channel, cp->device->id, cp->device->lun, cp,
cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
@ -1184,9 +1185,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
atomic_read(&fcport->state)));
cp->result = DID_BUS_BUSY << 16;
if (atomic_read(&fcport->state) == FCS_ONLINE) {
qla2x00_mark_device_lost(ha, fcport, 1, 1);
}
if (atomic_read(&fcport->state) == FCS_ONLINE)
qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
case CS_RESET:
@ -1229,7 +1229,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
qla2x00_mark_device_lost(ha, fcport, 1, 1);
qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
default:

2
drivers/scsi/qla2xxx/qla_mbx.c
Просмотреть файл

@ -2686,7 +2686,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
wake_up_process(ha->dpc_thread);
qla2xxx_wake_dpc(ha);
}
}

18
drivers/scsi/qla2xxx/qla_os.c
Просмотреть файл

@ -780,7 +780,8 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
sp = pha->outstanding_cmds[cnt];
if (!sp)
continue;
if (ha->vp_idx != sp->ha->vp_idx)
if (ha->vp_idx != sp->fcport->ha->vp_idx)
continue;
match = 0;
switch (type) {
@ -1080,9 +1081,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
sp = ha->outstanding_cmds[cnt];
if (sp) {
ha->outstanding_cmds[cnt] = NULL;
sp->flags = 0;
sp->cmd->result = res;
sp->cmd->host_scribble = (unsigned char *)NULL;
qla2x00_sp_compl(ha, sp);
}
}
@ -1776,10 +1775,15 @@ probe_out:
static void
qla2x00_remove_one(struct pci_dev *pdev)
{
scsi_qla_host_t *ha;
scsi_qla_host_t *ha, *vha, *temp;
ha = pci_get_drvdata(pdev);
list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
fc_vport_terminate(vha->fc_vport);
set_bit(UNLOADING, &ha->dpc_flags);
qla2x00_dfs_remove(ha);
qla84xx_put_chip(ha);
@ -2451,8 +2455,10 @@ qla2x00_do_dpc(void *data)
void
qla2xxx_wake_dpc(scsi_qla_host_t *ha)
{
if (ha->dpc_thread)
wake_up_process(ha->dpc_thread);
struct task_struct *t = ha->dpc_thread;
if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
wake_up_process(t);
}
/*

2
drivers/scsi/qla2xxx/qla_version.h
Просмотреть файл

@ -7,7 +7,7 @@
/*
* Driver version
*/
#define QLA2XXX_VERSION "8.02.01-k6"
#define QLA2XXX_VERSION "8.02.01-k7"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2

3
include/scsi/scsi_device.h
Просмотреть файл

@ -6,6 +6,7 @@
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/blkdev.h>
#include <scsi/scsi.h>
#include <asm/atomic.h>
struct request_queue;
@ -426,7 +427,7 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
static inline int scsi_device_protection(struct scsi_device *sdev)
{
return sdev->inquiry[5] & (1<<0);
return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
#define MODULE_ALIAS_SCSI_DEVICE(type) \