hwmon: (lm90) Improve error handling

Replace devm_add_action() with devm_add_action_or_reset(),
and check its return value.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

drivers/hwmon/lm90.c

@@ -1551,9 +1551,7 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
 	if (config != data->config_orig) /* Only write if changed */
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 
-	devm_add_action(&client->dev, lm90_restore_conf, data);
-
-	return 0;
+	return devm_add_action_or_reset(&client->dev, lm90_restore_conf, data);
 }
 
 static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
@@ -1640,7 +1638,9 @@ static int lm90_probe(struct i2c_client *client,
 		return err;
 	}
 
-	devm_add_action(dev, lm90_regulator_disable, regulator);
+	err = devm_add_action_or_reset(dev, lm90_regulator_disable, regulator);
+	if (err)
+		return err;
 
 	data = devm_kzalloc(dev, sizeof(struct lm90_data), GFP_KERNEL);
 	if (!data)
@@ -1696,7 +1696,9 @@ static int lm90_probe(struct i2c_client *client,
 		err = device_create_file(dev, &dev_attr_pec);
 		if (err)
 			return err;
-		devm_add_action(dev, lm90_remove_pec, dev);
+		err = devm_add_action_or_reset(dev, lm90_remove_pec, dev);
+		if (err)
+			return err;
 	}
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,