usb: dwc3: gadget: align transfers to wMaxPacketSize

Instead of passing quirk_ep_out_aligned_size, we can use one extra TRB
to align transfer to wMaxPacketSize.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This commit is contained in:
Felipe Balbi 2017-01-05 14:58:46 +02:00
Родитель 905dc04ea7
Коммит c6267a5163
2 изменённых файлов: 63 добавлений и 8 удалений

Просмотреть файл

@ -725,6 +725,7 @@ struct dwc3_hwparams {
* @epnum: endpoint number to which this request refers
* @trb: pointer to struct dwc3_trb
* @trb_dma: DMA address of @trb
* @unaligned: true for OUT endpoints with length not divisible by maxp
* @direction: IN or OUT direction flag
* @mapped: true when request has been dma-mapped
* @queued: true when request has been queued to HW
@ -741,6 +742,7 @@ struct dwc3_request {
struct dwc3_trb *trb;
dma_addr_t trb_dma;
unsigned unaligned:1;
unsigned direction:1;
unsigned mapped:1;
unsigned started:1;

Просмотреть файл

@ -992,12 +992,33 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
int i;
for_each_sg(sg, s, req->num_pending_sgs, i) {
unsigned int length = req->request.length;
unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
unsigned int rem = length % maxp;
unsigned chain = true;
if (sg_is_last(s))
chain = false;
dwc3_prepare_one_trb(dep, req, chain, i);
if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
struct dwc3 *dwc = dep->dwc;
struct dwc3_trb *trb;
req->unaligned = true;
/* prepare normal TRB */
dwc3_prepare_one_trb(dep, req, true, i);
/* Now prepare one extra TRB to align transfer size */
trb = &dep->trb_pool[dep->trb_enqueue];
__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
maxp - rem, false, 0,
req->request.stream_id,
req->request.short_not_ok,
req->request.no_interrupt);
} else {
dwc3_prepare_one_trb(dep, req, chain, i);
}
if (!dwc3_calc_trbs_left(dep))
break;
@ -1007,7 +1028,28 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
struct dwc3_request *req)
{
dwc3_prepare_one_trb(dep, req, false, 0);
unsigned int length = req->request.length;
unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
unsigned int rem = length % maxp;
if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
struct dwc3 *dwc = dep->dwc;
struct dwc3_trb *trb;
req->unaligned = true;
/* prepare normal TRB */
dwc3_prepare_one_trb(dep, req, true, 0);
/* Now prepare one extra TRB to align transfer size */
trb = &dep->trb_pool[dep->trb_enqueue];
__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
false, 0, req->request.stream_id,
req->request.short_not_ok,
req->request.no_interrupt);
} else {
dwc3_prepare_one_trb(dep, req, false, 0);
}
}
/*
@ -2031,6 +2073,16 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
/*
* If we're dealing with unaligned size OUT transfer, we will be left
* with one TRB pending in the ring. We need to manually clear HWO bit
* from that TRB.
*/
if (req->unaligned && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
return 1;
}
if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
return 1;
@ -2120,6 +2172,13 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
event, status, chain);
}
if (req->unaligned) {
trb = &dep->trb_pool[dep->trb_dequeue];
ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
event, status, false);
req->unaligned = false;
}
req->request.actual = length - req->remaining;
if ((req->request.actual < length) && req->num_pending_sgs)
@ -3058,12 +3117,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.max_speed = dwc->maximum_speed;
/*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
*/
dwc->gadget.quirk_ep_out_aligned_size = true;
/*
* REVISIT: Here we should clear all pending IRQs to be
* sure we're starting from a well known location.