Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3479/1: Corgi SSP: Fix potential concurrent access problem
  [ARM] 3478/1: SharpSL SCOOP: Fix potenial build failure

arch/arm/common/scoop.c

@@ -18,6 +18,18 @@
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code.
+
+   This file is never modular so this symbol is always
+   accessile to the board support files.
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+EXPORT_SYMBOL(platform_scoop_config);
+
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
 struct  scoop_dev {

arch/arm/mach-pxa/corgi_ssp.c

@@ -196,12 +196,9 @@ static int __init corgi_ssp_probe(struct platform_device *dev)
 	int ret;
 
 	/* Chip Select - Disable All */
-	GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /* output */
-	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111); /* output */
-	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);  /* High - Disable MAX1111*/
-	GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846);  /* output */
-	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);   /* High - Disable ADS7846*/
+	pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
+        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
+        pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
 
 	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
 

drivers/pcmcia/pxa2xx_sharpsl.c

@@ -26,14 +26,6 @@
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
-
-/* PCMCIA to Scoop linkage
-
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device so this structure
-   is used which is setup by the platform code
-*/
-struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
 static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)