rtc: Ramtron FM3130 RTC support
Ramtron FM3130 is a chip with two separate devices inside, RTC clock and FRAM. This driver provides only RTC functionality. This chip is met in lots of custom boards with AT91SAMXXXX CPU I work with, is cheap and in no way better or worse than any other RTC on market. While it is mostly met on much smaller devices, I think it is great to have it supported in Linux. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Sergey Lapin
Linus Torvalds
Родитель
e6d2bb2bac
Коммит
c6d8f400cc
|
|
@ -256,6 +256,17 @@ config RTC_DRV_S35390A
|
|||
This driver can also be built as a module. If so the module
|
||||
will be called rtc-s35390a.
|
||||
|
||||
config RTC_DRV_FM3130
|
||||
tristate "Ramtron FM3130"
|
||||
help
|
||||
If you say Y here you will get support for the
|
||||
Ramtron FM3130 RTC chips.
|
||||
Ramtron FM3130 is a chip with two separate devices inside,
|
||||
RTC clock and FRAM. This driver provides only RTC functionality.
|
||||
|
||||
This driver can also be built as a module. If so the module
|
||||
will be called rtc-fm3130.
|
||||
|
||||
endif # I2C
|
||||
|
||||
comment "SPI RTC drivers"
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
|
|||
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
|
||||
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
|
||||
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
|
||||
obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
|
||||
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
|
||||
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
|
||||
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
|
||||
|
|
@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
|
|||
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
|
||||
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
|
||||
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
|
||||
obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
|
||||
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
|
||||
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
|
||||
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
|
||||
|
|
@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
|
|||
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
|
||||
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
|
||||
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
|
||||
obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,501 @@
|
|||
/*
|
||||
* rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
|
||||
*
|
||||
* Copyright (C) 2008 Sergey Lapin
|
||||
* Based on ds1307 driver by James Chapman and David Brownell
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/bcd.h>
|
||||
|
||||
#define FM3130_RTC_CONTROL (0x0)
|
||||
#define FM3130_CAL_CONTROL (0x1)
|
||||
#define FM3130_RTC_SECONDS (0x2)
|
||||
#define FM3130_RTC_MINUTES (0x3)
|
||||
#define FM3130_RTC_HOURS (0x4)
|
||||
#define FM3130_RTC_DAY (0x5)
|
||||
#define FM3130_RTC_DATE (0x6)
|
||||
#define FM3130_RTC_MONTHS (0x7)
|
||||
#define FM3130_RTC_YEARS (0x8)
|
||||
|
||||
#define FM3130_ALARM_SECONDS (0x9)
|
||||
#define FM3130_ALARM_MINUTES (0xa)
|
||||
#define FM3130_ALARM_HOURS (0xb)
|
||||
#define FM3130_ALARM_DATE (0xc)
|
||||
#define FM3130_ALARM_MONTHS (0xd)
|
||||
#define FM3130_ALARM_WP_CONTROL (0xe)
|
||||
|
||||
#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
|
||||
#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
|
||||
#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
|
||||
#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
|
||||
#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
|
||||
#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
|
||||
#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
|
||||
#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
|
||||
#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
|
||||
|
||||
#define FM3130_CLOCK_REGS 7
|
||||
#define FM3130_ALARM_REGS 5
|
||||
|
||||
struct fm3130 {
|
||||
u8 reg_addr_time;
|
||||
u8 reg_addr_alarm;
|
||||
u8 regs[15];
|
||||
struct i2c_msg msg[4];
|
||||
struct i2c_client *client;
|
||||
struct rtc_device *rtc;
|
||||
int data_valid;
|
||||
int alarm;
|
||||
};
|
||||
static const struct i2c_device_id fm3130_id[] = {
|
||||
{ "fm3130-rtc", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, fm3130_id);
|
||||
|
||||
#define FM3130_MODE_NORMAL 0
|
||||
#define FM3130_MODE_WRITE 1
|
||||
#define FM3130_MODE_READ 2
|
||||
|
||||
static void fm3130_rtc_mode(struct device *dev, int mode)
|
||||
{
|
||||
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
||||
|
||||
fm3130->regs[FM3130_RTC_CONTROL] =
|
||||
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
||||
switch (mode) {
|
||||
case FM3130_MODE_NORMAL:
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &=
|
||||
~(FM3130_RTC_CONTROL_BIT_WRITE |
|
||||
FM3130_RTC_CONTROL_BIT_READ);
|
||||
break;
|
||||
case FM3130_MODE_WRITE:
|
||||
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
|
||||
break;
|
||||
case FM3130_MODE_READ:
|
||||
fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
|
||||
break;
|
||||
default:
|
||||
dev_dbg(dev, "invalid mode %d\n", mode);
|
||||
break;
|
||||
}
|
||||
/* Checking for alarm */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
||||
fm3130->alarm = 1;
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
||||
}
|
||||
i2c_smbus_write_byte_data(fm3130->client,
|
||||
FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
|
||||
}
|
||||
|
||||
static int fm3130_get_time(struct device *dev, struct rtc_time *t)
|
||||
{
|
||||
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
||||
int tmp;
|
||||
|
||||
if (!fm3130->data_valid) {
|
||||
/* We have invalid data in RTC, probably due
|
||||
to battery faults or other problems. Return EIO
|
||||
for now, it will allow us to set data later insted
|
||||
of error during probing which disables device */
|
||||
return -EIO;
|
||||
}
|
||||
fm3130_rtc_mode(dev, FM3130_MODE_READ);
|
||||
|
||||
/* read the RTC date and time registers all at once */
|
||||
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
|
||||
fm3130->msg, 2);
|
||||
if (tmp != 2) {
|
||||
dev_err(dev, "%s error %d\n", "read", tmp);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
||||
|
||||
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
|
||||
"%02x %02x %02x %02x %02x %02x %02x\n",
|
||||
"read",
|
||||
fm3130->regs[0], fm3130->regs[1],
|
||||
fm3130->regs[2], fm3130->regs[3],
|
||||
fm3130->regs[4], fm3130->regs[5],
|
||||
fm3130->regs[6], fm3130->regs[7],
|
||||
fm3130->regs[8], fm3130->regs[9],
|
||||
fm3130->regs[0xa], fm3130->regs[0xb],
|
||||
fm3130->regs[0xc], fm3130->regs[0xd],
|
||||
fm3130->regs[0xe]);
|
||||
|
||||
t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
|
||||
t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
||||
tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
|
||||
t->tm_hour = BCD2BIN(tmp);
|
||||
t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
|
||||
t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
||||
tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
|
||||
t->tm_mon = BCD2BIN(tmp) - 1;
|
||||
|
||||
/* assume 20YY not 19YY, and ignore CF bit */
|
||||
t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100;
|
||||
|
||||
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
||||
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
||||
"read", t->tm_sec, t->tm_min,
|
||||
t->tm_hour, t->tm_mday,
|
||||
t->tm_mon, t->tm_year, t->tm_wday);
|
||||
|
||||
/* initial clock setting can be undefined */
|
||||
return rtc_valid_tm(t);
|
||||
}
|
||||
|
||||
|
||||
static int fm3130_set_time(struct device *dev, struct rtc_time *t)
|
||||
{
|
||||
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
||||
int tmp, i;
|
||||
u8 *buf = fm3130->regs;
|
||||
|
||||
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
||||
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
||||
"write", t->tm_sec, t->tm_min,
|
||||
t->tm_hour, t->tm_mday,
|
||||
t->tm_mon, t->tm_year, t->tm_wday);
|
||||
|
||||
/* first register addr */
|
||||
buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec);
|
||||
buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min);
|
||||
buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour);
|
||||
buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1);
|
||||
buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday);
|
||||
buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1);
|
||||
|
||||
/* assume 20YY not 19YY */
|
||||
tmp = t->tm_year - 100;
|
||||
buf[FM3130_RTC_YEARS] = BIN2BCD(tmp);
|
||||
|
||||
dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
|
||||
"%02x %02x %02x %02x %02x %02x %02x %02x\n",
|
||||
"write", buf[0], buf[1], buf[2], buf[3],
|
||||
buf[4], buf[5], buf[6], buf[7],
|
||||
buf[8], buf[9], buf[0xa], buf[0xb],
|
||||
buf[0xc], buf[0xd], buf[0xe]);
|
||||
|
||||
fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
|
||||
|
||||
/* Writing time registers, we don't support multibyte transfers */
|
||||
for (i = 0; i < FM3130_CLOCK_REGS; i++) {
|
||||
i2c_smbus_write_byte_data(fm3130->client,
|
||||
FM3130_RTC_SECONDS + i,
|
||||
fm3130->regs[FM3130_RTC_SECONDS + i]);
|
||||
}
|
||||
|
||||
fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
|
||||
|
||||
/* We assume here that data are valid once written */
|
||||
if (!fm3130->data_valid)
|
||||
fm3130->data_valid = 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
||||
int tmp;
|
||||
struct rtc_time *tm = &alrm->time;
|
||||
/* read the RTC alarm registers all at once */
|
||||
tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
|
||||
&fm3130->msg[2], 2);
|
||||
if (tmp != 2) {
|
||||
dev_err(dev, "%s error %d\n", "read", tmp);
|
||||
return -EIO;
|
||||
}
|
||||
dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
|
||||
fm3130->regs[FM3130_ALARM_SECONDS],
|
||||
fm3130->regs[FM3130_ALARM_MINUTES],
|
||||
fm3130->regs[FM3130_ALARM_HOURS],
|
||||
fm3130->regs[FM3130_ALARM_DATE],
|
||||
fm3130->regs[FM3130_ALARM_MONTHS]);
|
||||
|
||||
|
||||
tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
|
||||
tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
|
||||
tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
|
||||
tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
|
||||
tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
|
||||
if (tm->tm_mon > 0)
|
||||
tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
|
||||
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
||||
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
||||
"read alarm", tm->tm_sec, tm->tm_min,
|
||||
tm->tm_hour, tm->tm_mday,
|
||||
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct fm3130 *fm3130 = dev_get_drvdata(dev);
|
||||
struct rtc_time *tm = &alrm->time;
|
||||
int i;
|
||||
|
||||
dev_dbg(dev, "%s secs=%d, mins=%d, "
|
||||
"hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
|
||||
"write alarm", tm->tm_sec, tm->tm_min,
|
||||
tm->tm_hour, tm->tm_mday,
|
||||
tm->tm_mon, tm->tm_year, tm->tm_wday);
|
||||
|
||||
if (tm->tm_sec != -1)
|
||||
fm3130->regs[FM3130_ALARM_SECONDS] =
|
||||
BIN2BCD(tm->tm_sec) | 0x80;
|
||||
|
||||
if (tm->tm_min != -1)
|
||||
fm3130->regs[FM3130_ALARM_MINUTES] =
|
||||
BIN2BCD(tm->tm_min) | 0x80;
|
||||
|
||||
if (tm->tm_hour != -1)
|
||||
fm3130->regs[FM3130_ALARM_HOURS] =
|
||||
BIN2BCD(tm->tm_hour) | 0x80;
|
||||
|
||||
if (tm->tm_mday != -1)
|
||||
fm3130->regs[FM3130_ALARM_DATE] =
|
||||
BIN2BCD(tm->tm_mday) | 0x80;
|
||||
|
||||
if (tm->tm_mon != -1)
|
||||
fm3130->regs[FM3130_ALARM_MONTHS] =
|
||||
BIN2BCD(tm->tm_mon + 1) | 0x80;
|
||||
|
||||
dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
|
||||
fm3130->regs[FM3130_ALARM_SECONDS],
|
||||
fm3130->regs[FM3130_ALARM_MINUTES],
|
||||
fm3130->regs[FM3130_ALARM_HOURS],
|
||||
fm3130->regs[FM3130_ALARM_DATE],
|
||||
fm3130->regs[FM3130_ALARM_MONTHS]);
|
||||
/* Writing time registers, we don't support multibyte transfers */
|
||||
for (i = 0; i < FM3130_ALARM_REGS; i++) {
|
||||
i2c_smbus_write_byte_data(fm3130->client,
|
||||
FM3130_ALARM_SECONDS + i,
|
||||
fm3130->regs[FM3130_ALARM_SECONDS + i]);
|
||||
}
|
||||
fm3130->regs[FM3130_RTC_CONTROL] =
|
||||
i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
|
||||
/* Checking for alarm */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
||||
fm3130->alarm = 1;
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
||||
}
|
||||
if (alrm->enabled) {
|
||||
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
||||
(fm3130->regs[FM3130_RTC_CONTROL] &
|
||||
~(FM3130_RTC_CONTROL_BIT_CAL)) |
|
||||
FM3130_RTC_CONTROL_BIT_AEN);
|
||||
} else {
|
||||
i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &
|
||||
~(FM3130_RTC_CONTROL_BIT_AEN));
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct rtc_class_ops fm3130_rtc_ops = {
|
||||
.read_time = fm3130_get_time,
|
||||
.set_time = fm3130_set_time,
|
||||
.read_alarm = fm3130_read_alarm,
|
||||
.set_alarm = fm3130_set_alarm,
|
||||
};
|
||||
|
||||
static struct i2c_driver fm3130_driver;
|
||||
|
||||
static int __devinit fm3130_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct fm3130 *fm3130;
|
||||
int err = -ENODEV;
|
||||
int tmp;
|
||||
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
||||
|
||||
if (!i2c_check_functionality(adapter,
|
||||
I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
||||
return -EIO;
|
||||
|
||||
fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
|
||||
|
||||
if (!fm3130)
|
||||
return -ENOMEM;
|
||||
|
||||
fm3130->client = client;
|
||||
i2c_set_clientdata(client, fm3130);
|
||||
fm3130->reg_addr_time = FM3130_RTC_SECONDS;
|
||||
fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
|
||||
|
||||
/* Messages to read time */
|
||||
fm3130->msg[0].addr = client->addr;
|
||||
fm3130->msg[0].flags = 0;
|
||||
fm3130->msg[0].len = 1;
|
||||
fm3130->msg[0].buf = &fm3130->reg_addr_time;
|
||||
|
||||
fm3130->msg[1].addr = client->addr;
|
||||
fm3130->msg[1].flags = I2C_M_RD;
|
||||
fm3130->msg[1].len = FM3130_CLOCK_REGS;
|
||||
fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
|
||||
|
||||
/* Messages to read alarm */
|
||||
fm3130->msg[2].addr = client->addr;
|
||||
fm3130->msg[2].flags = 0;
|
||||
fm3130->msg[2].len = 1;
|
||||
fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
|
||||
|
||||
fm3130->msg[3].addr = client->addr;
|
||||
fm3130->msg[3].flags = I2C_M_RD;
|
||||
fm3130->msg[3].len = FM3130_ALARM_REGS;
|
||||
fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
|
||||
|
||||
fm3130->data_valid = 0;
|
||||
|
||||
tmp = i2c_transfer(adapter, fm3130->msg, 4);
|
||||
if (tmp != 4) {
|
||||
pr_debug("read error %d\n", tmp);
|
||||
err = -EIO;
|
||||
goto exit_free;
|
||||
}
|
||||
|
||||
fm3130->regs[FM3130_RTC_CONTROL] =
|
||||
i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
|
||||
fm3130->regs[FM3130_CAL_CONTROL] =
|
||||
i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
|
||||
|
||||
/* Checking for alarm */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
|
||||
fm3130->alarm = 1;
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
|
||||
}
|
||||
|
||||
/* Disabling calibration mode */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
|
||||
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &
|
||||
~(FM3130_RTC_CONTROL_BIT_CAL));
|
||||
dev_warn(&client->dev, "Disabling calibration mode!\n");
|
||||
|
||||
/* Disabling read and write modes */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
|
||||
fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
|
||||
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &
|
||||
~(FM3130_RTC_CONTROL_BIT_READ |
|
||||
FM3130_RTC_CONTROL_BIT_WRITE));
|
||||
dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
|
||||
|
||||
/* oscillator off? turn it on, so clock can tick. */
|
||||
if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
|
||||
i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
|
||||
fm3130->regs[FM3130_CAL_CONTROL] &
|
||||
~(FM3130_CAL_CONTROL_BIT_nOSCEN));
|
||||
|
||||
/* oscillator fault? clear flag, and warn */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
|
||||
dev_warn(&client->dev, "Low battery!\n");
|
||||
|
||||
/* oscillator fault? clear flag, and warn */
|
||||
if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
|
||||
i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
|
||||
fm3130->regs[FM3130_RTC_CONTROL] &
|
||||
~FM3130_RTC_CONTROL_BIT_POR);
|
||||
dev_warn(&client->dev, "SET TIME!\n");
|
||||
}
|
||||
/* ACS is controlled by alarm */
|
||||
i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
|
||||
|
||||
/* TODO */
|
||||
/* TODO need to sanity check alarm */
|
||||
tmp = fm3130->regs[FM3130_RTC_SECONDS];
|
||||
tmp = BCD2BIN(tmp & 0x7f);
|
||||
if (tmp > 60)
|
||||
goto exit_bad;
|
||||
tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
|
||||
if (tmp > 60)
|
||||
goto exit_bad;
|
||||
|
||||
tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
|
||||
if (tmp == 0 || tmp > 31)
|
||||
goto exit_bad;
|
||||
|
||||
tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
|
||||
if (tmp == 0 || tmp > 12)
|
||||
goto exit_bad;
|
||||
|
||||
tmp = fm3130->regs[FM3130_RTC_HOURS];
|
||||
|
||||
fm3130->data_valid = 1;
|
||||
|
||||
exit_bad:
|
||||
if (!fm3130->data_valid)
|
||||
dev_dbg(&client->dev,
|
||||
"%s: %02x %02x %02x %02x %02x %02x %02x %02x"
|
||||
"%02x %02x %02x %02x %02x %02x %02x\n",
|
||||
"bogus registers",
|
||||
fm3130->regs[0], fm3130->regs[1],
|
||||
fm3130->regs[2], fm3130->regs[3],
|
||||
fm3130->regs[4], fm3130->regs[5],
|
||||
fm3130->regs[6], fm3130->regs[7],
|
||||
fm3130->regs[8], fm3130->regs[9],
|
||||
fm3130->regs[0xa], fm3130->regs[0xb],
|
||||
fm3130->regs[0xc], fm3130->regs[0xd],
|
||||
fm3130->regs[0xe]);
|
||||
|
||||
/* We won't bail out here because we just got invalid data.
|
||||
Time setting from u-boot doesn't work anyway */
|
||||
fm3130->rtc = rtc_device_register(client->name, &client->dev,
|
||||
&fm3130_rtc_ops, THIS_MODULE);
|
||||
if (IS_ERR(fm3130->rtc)) {
|
||||
err = PTR_ERR(fm3130->rtc);
|
||||
dev_err(&client->dev,
|
||||
"unable to register the class device\n");
|
||||
goto exit_free;
|
||||
}
|
||||
return 0;
|
||||
exit_free:
|
||||
kfree(fm3130);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit fm3130_remove(struct i2c_client *client)
|
||||
{
|
||||
struct fm3130 *fm3130 = i2c_get_clientdata(client);
|
||||
|
||||
rtc_device_unregister(fm3130->rtc);
|
||||
kfree(fm3130);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver fm3130_driver = {
|
||||
.driver = {
|
||||
.name = "rtc-fm3130",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = fm3130_probe,
|
||||
.remove = __devexit_p(fm3130_remove),
|
||||
.id_table = fm3130_id,
|
||||
};
|
||||
|
||||
static int __init fm3130_init(void)
|
||||
{
|
||||
return i2c_add_driver(&fm3130_driver);
|
||||
}
|
||||
module_init(fm3130_init);
|
||||
|
||||
static void __exit fm3130_exit(void)
|
||||
{
|
||||
i2c_del_driver(&fm3130_driver);
|
||||
}
|
||||
module_exit(fm3130_exit);
|
||||
|
||||
MODULE_DESCRIPTION("RTC driver for FM3130");
|
||||
MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
Загрузка…
Ссылка в новой задаче