i2c: add i2c bus driver for NVIDIA GPU
Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C controller which can be accessed over I2C. This driver adds I2C bus driver to communicate with Type-C controller. I2C client driver will be part of USB Type-C UCSI driver. Signed-off-by: Ajay Gupta <ajayg@nvidia.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [wsa: kept Makefile sorting] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
Ajay Gupta
Wolfram Sang
Родитель
848bd3f3de
Коммит
c71bcdcb42
|
|
@ -0,0 +1,18 @@
|
|||
Kernel driver i2c-nvidia-gpu
|
||||
|
||||
Datasheet: not publicly available.
|
||||
|
||||
Authors:
|
||||
Ajay Gupta <ajayg@nvidia.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing
|
||||
and later GPUs and it is used to communicate with Type-C controller on GPUs.
|
||||
|
||||
If your 'lspci -v' listing shows something like the following,
|
||||
|
||||
01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1)
|
||||
|
||||
then this driver should support the I2C controller of your GPU.
|
||||
|
|
@ -6861,6 +6861,13 @@ L: linux-acpi@vger.kernel.org
|
|||
S: Maintained
|
||||
F: drivers/i2c/i2c-core-acpi.c
|
||||
|
||||
I2C CONTROLLER DRIVER FOR NVIDIA GPU
|
||||
M: Ajay Gupta <ajayg@nvidia.com>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/i2c/busses/i2c-nvidia-gpu
|
||||
F: drivers/i2c/busses/i2c-nvidia-gpu.c
|
||||
|
||||
I2C MUXES
|
||||
M: Peter Rosin <peda@axentia.se>
|
||||
L: linux-i2c@vger.kernel.org
|
||||
|
|
|
|||
|
|
@ -224,6 +224,15 @@ config I2C_NFORCE2_S4985
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-nforce2-s4985.
|
||||
|
||||
config I2C_NVIDIA_GPU
|
||||
tristate "NVIDIA GPU I2C controller"
|
||||
depends on PCI
|
||||
help
|
||||
If you say yes to this option, support will be included for the
|
||||
NVIDIA GPU I2C controller which is used to communicate with the GPU's
|
||||
Type-C controller. This driver can also be built as a module called
|
||||
i2c-nvidia-gpu.
|
||||
|
||||
config I2C_SIS5595
|
||||
tristate "SiS 5595"
|
||||
depends on PCI
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ obj-$(CONFIG_I2C_ISCH) += i2c-isch.o
|
|||
obj-$(CONFIG_I2C_ISMT) += i2c-ismt.o
|
||||
obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o
|
||||
obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o
|
||||
obj-$(CONFIG_I2C_NVIDIA_GPU) += i2c-nvidia-gpu.o
|
||||
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
|
||||
obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
|
||||
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,368 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Nvidia GPU I2C controller Driver
|
||||
*
|
||||
* Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
|
||||
* Author: Ajay Gupta <ajayg@nvidia.com>
|
||||
*/
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pci.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
|
||||
#include <asm/unaligned.h>
|
||||
|
||||
/* I2C definitions */
|
||||
#define I2C_MST_CNTL 0x00
|
||||
#define I2C_MST_CNTL_GEN_START BIT(0)
|
||||
#define I2C_MST_CNTL_GEN_STOP BIT(1)
|
||||
#define I2C_MST_CNTL_CMD_READ (1 << 2)
|
||||
#define I2C_MST_CNTL_CMD_WRITE (2 << 2)
|
||||
#define I2C_MST_CNTL_BURST_SIZE_SHIFT 6
|
||||
#define I2C_MST_CNTL_GEN_NACK BIT(28)
|
||||
#define I2C_MST_CNTL_STATUS GENMASK(30, 29)
|
||||
#define I2C_MST_CNTL_STATUS_OKAY (0 << 29)
|
||||
#define I2C_MST_CNTL_STATUS_NO_ACK (1 << 29)
|
||||
#define I2C_MST_CNTL_STATUS_TIMEOUT (2 << 29)
|
||||
#define I2C_MST_CNTL_STATUS_BUS_BUSY (3 << 29)
|
||||
#define I2C_MST_CNTL_CYCLE_TRIGGER BIT(31)
|
||||
|
||||
#define I2C_MST_ADDR 0x04
|
||||
|
||||
#define I2C_MST_I2C0_TIMING 0x08
|
||||
#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ 0x10e
|
||||
#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT 16
|
||||
#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX 255
|
||||
#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK BIT(24)
|
||||
|
||||
#define I2C_MST_DATA 0x0c
|
||||
|
||||
#define I2C_MST_HYBRID_PADCTL 0x20
|
||||
#define I2C_MST_HYBRID_PADCTL_MODE_I2C BIT(0)
|
||||
#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV BIT(14)
|
||||
#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV BIT(15)
|
||||
|
||||
struct gpu_i2c_dev {
|
||||
struct device *dev;
|
||||
void __iomem *regs;
|
||||
struct i2c_adapter adapter;
|
||||
struct i2c_board_info *gpu_ccgx_ucsi;
|
||||
};
|
||||
|
||||
static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
/* enable I2C */
|
||||
val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
|
||||
val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
|
||||
I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
|
||||
I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
|
||||
writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
|
||||
|
||||
/* enable 100KHZ mode */
|
||||
val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
|
||||
val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
|
||||
<< I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
|
||||
val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
|
||||
writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
|
||||
}
|
||||
|
||||
static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
|
||||
{
|
||||
unsigned long target = jiffies + msecs_to_jiffies(1000);
|
||||
u32 val;
|
||||
|
||||
do {
|
||||
val = readl(i2cd->regs + I2C_MST_CNTL);
|
||||
if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
|
||||
break;
|
||||
if ((val & I2C_MST_CNTL_STATUS) !=
|
||||
I2C_MST_CNTL_STATUS_BUS_BUSY)
|
||||
break;
|
||||
usleep_range(500, 600);
|
||||
} while (time_is_after_jiffies(target));
|
||||
|
||||
if (time_is_before_jiffies(target)) {
|
||||
dev_err(i2cd->dev, "i2c timeout error %x\n", val);
|
||||
return -ETIME;
|
||||
}
|
||||
|
||||
val = readl(i2cd->regs + I2C_MST_CNTL);
|
||||
switch (val & I2C_MST_CNTL_STATUS) {
|
||||
case I2C_MST_CNTL_STATUS_OKAY:
|
||||
return 0;
|
||||
case I2C_MST_CNTL_STATUS_NO_ACK:
|
||||
return -EIO;
|
||||
case I2C_MST_CNTL_STATUS_TIMEOUT:
|
||||
return -ETIME;
|
||||
default:
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
|
||||
{
|
||||
int status;
|
||||
u32 val;
|
||||
|
||||
val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
|
||||
(len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
|
||||
I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
|
||||
writel(val, i2cd->regs + I2C_MST_CNTL);
|
||||
|
||||
status = gpu_i2c_check_status(i2cd);
|
||||
if (status < 0)
|
||||
return status;
|
||||
|
||||
val = readl(i2cd->regs + I2C_MST_DATA);
|
||||
switch (len) {
|
||||
case 1:
|
||||
data[0] = val;
|
||||
break;
|
||||
case 2:
|
||||
put_unaligned_be16(val, data);
|
||||
break;
|
||||
case 3:
|
||||
put_unaligned_be16(val >> 8, data);
|
||||
data[2] = val;
|
||||
break;
|
||||
case 4:
|
||||
put_unaligned_be32(val, data);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
|
||||
{
|
||||
writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
|
||||
return gpu_i2c_check_status(i2cd);
|
||||
}
|
||||
|
||||
static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
|
||||
{
|
||||
writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
|
||||
return gpu_i2c_check_status(i2cd);
|
||||
}
|
||||
|
||||
static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
|
||||
{
|
||||
u32 val;
|
||||
|
||||
writel(data, i2cd->regs + I2C_MST_DATA);
|
||||
|
||||
val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
|
||||
writel(val, i2cd->regs + I2C_MST_CNTL);
|
||||
|
||||
return gpu_i2c_check_status(i2cd);
|
||||
}
|
||||
|
||||
static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
|
||||
struct i2c_msg *msgs, int num)
|
||||
{
|
||||
struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
|
||||
int status, status2;
|
||||
int i, j;
|
||||
|
||||
/*
|
||||
* The controller supports maximum 4 byte read due to known
|
||||
* limitation of sending STOP after every read.
|
||||
*/
|
||||
for (i = 0; i < num; i++) {
|
||||
if (msgs[i].flags & I2C_M_RD) {
|
||||
/* program client address before starting read */
|
||||
writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
|
||||
/* gpu_i2c_read has implicit start */
|
||||
status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
|
||||
if (status < 0)
|
||||
goto stop;
|
||||
} else {
|
||||
u8 addr = i2c_8bit_addr_from_msg(msgs + i);
|
||||
|
||||
status = gpu_i2c_start(i2cd);
|
||||
if (status < 0) {
|
||||
if (i == 0)
|
||||
return status;
|
||||
goto stop;
|
||||
}
|
||||
|
||||
status = gpu_i2c_write(i2cd, addr);
|
||||
if (status < 0)
|
||||
goto stop;
|
||||
|
||||
for (j = 0; j < msgs[i].len; j++) {
|
||||
status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
|
||||
if (status < 0)
|
||||
goto stop;
|
||||
}
|
||||
}
|
||||
}
|
||||
status = gpu_i2c_stop(i2cd);
|
||||
if (status < 0)
|
||||
return status;
|
||||
|
||||
return i;
|
||||
stop:
|
||||
status2 = gpu_i2c_stop(i2cd);
|
||||
if (status2 < 0)
|
||||
dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
|
||||
return status;
|
||||
}
|
||||
|
||||
static const struct i2c_adapter_quirks gpu_i2c_quirks = {
|
||||
.max_read_len = 4,
|
||||
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
|
||||
};
|
||||
|
||||
static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm gpu_i2c_algorithm = {
|
||||
.master_xfer = gpu_i2c_master_xfer,
|
||||
.functionality = gpu_i2c_functionality,
|
||||
};
|
||||
|
||||
/*
|
||||
* This driver is for Nvidia GPU cards with USB Type-C interface.
|
||||
* We want to identify the cards using vendor ID and class code only
|
||||
* to avoid dependency of adding product id for any new card which
|
||||
* requires this driver.
|
||||
* Currently there is no class code defined for UCSI device over PCI
|
||||
* so using UNKNOWN class for now and it will be updated when UCSI
|
||||
* over PCI gets a class code.
|
||||
* There is no other NVIDIA cards with UNKNOWN class code. Even if the
|
||||
* driver gets loaded for an undesired card then eventually i2c_read()
|
||||
* (initiated from UCSI i2c_client) will timeout or UCSI commands will
|
||||
* timeout.
|
||||
*/
|
||||
#define PCI_CLASS_SERIAL_UNKNOWN 0x0c80
|
||||
static const struct pci_device_id gpu_i2c_ids[] = {
|
||||
{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
||||
PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
|
||||
|
||||
static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
|
||||
{
|
||||
struct i2c_client *ccgx_client;
|
||||
|
||||
i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
|
||||
sizeof(*i2cd->gpu_ccgx_ucsi),
|
||||
GFP_KERNEL);
|
||||
if (!i2cd->gpu_ccgx_ucsi)
|
||||
return -ENOMEM;
|
||||
|
||||
strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
|
||||
sizeof(i2cd->gpu_ccgx_ucsi->type));
|
||||
i2cd->gpu_ccgx_ucsi->addr = 0x8;
|
||||
i2cd->gpu_ccgx_ucsi->irq = irq;
|
||||
ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
|
||||
if (!ccgx_client)
|
||||
return -ENODEV;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||||
{
|
||||
struct gpu_i2c_dev *i2cd;
|
||||
int status;
|
||||
|
||||
i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
|
||||
if (!i2cd)
|
||||
return -ENOMEM;
|
||||
|
||||
i2cd->dev = &pdev->dev;
|
||||
dev_set_drvdata(&pdev->dev, i2cd);
|
||||
|
||||
status = pcim_enable_device(pdev);
|
||||
if (status < 0) {
|
||||
dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
|
||||
return status;
|
||||
}
|
||||
|
||||
pci_set_master(pdev);
|
||||
|
||||
i2cd->regs = pcim_iomap(pdev, 0, 0);
|
||||
if (!i2cd->regs) {
|
||||
dev_err(&pdev->dev, "pcim_iomap failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
|
||||
if (status < 0) {
|
||||
dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
|
||||
return status;
|
||||
}
|
||||
|
||||
gpu_enable_i2c_bus(i2cd);
|
||||
|
||||
i2c_set_adapdata(&i2cd->adapter, i2cd);
|
||||
i2cd->adapter.owner = THIS_MODULE;
|
||||
strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
|
||||
sizeof(i2cd->adapter.name));
|
||||
i2cd->adapter.algo = &gpu_i2c_algorithm;
|
||||
i2cd->adapter.quirks = &gpu_i2c_quirks;
|
||||
i2cd->adapter.dev.parent = &pdev->dev;
|
||||
status = i2c_add_adapter(&i2cd->adapter);
|
||||
if (status < 0)
|
||||
goto free_irq_vectors;
|
||||
|
||||
status = gpu_populate_client(i2cd, pdev->irq);
|
||||
if (status < 0) {
|
||||
dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
|
||||
goto del_adapter;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
del_adapter:
|
||||
i2c_del_adapter(&i2cd->adapter);
|
||||
free_irq_vectors:
|
||||
pci_free_irq_vectors(pdev);
|
||||
return status;
|
||||
}
|
||||
|
||||
static void gpu_i2c_remove(struct pci_dev *pdev)
|
||||
{
|
||||
struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
i2c_del_adapter(&i2cd->adapter);
|
||||
pci_free_irq_vectors(pdev);
|
||||
}
|
||||
|
||||
static int gpu_i2c_resume(struct device *dev)
|
||||
{
|
||||
struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
|
||||
|
||||
gpu_enable_i2c_bus(i2cd);
|
||||
return 0;
|
||||
}
|
||||
|
||||
UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL);
|
||||
|
||||
static struct pci_driver gpu_i2c_driver = {
|
||||
.name = "nvidia-gpu",
|
||||
.id_table = gpu_i2c_ids,
|
||||
.probe = gpu_i2c_probe,
|
||||
.remove = gpu_i2c_remove,
|
||||
.driver = {
|
||||
.pm = &gpu_i2c_driver_pm,
|
||||
},
|
||||
};
|
||||
|
||||
module_pci_driver(gpu_i2c_driver);
|
||||
|
||||
MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
|
||||
MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче