usb: gadget: composite: Fix bMaxPower for SuperSpeedPlus

SuperSpeedPlus peripherals must report their bMaxPower of the
configuration descriptor in units of 8mA as per the USB 3.2
specification. The current switch statement in encode_bMaxPower()
only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so
the latter falls back to USB 2.0 encoding which uses 2mA units.
Replace the switch with a simple if/else.

Fixes: eae5820b85 ("usb: gadget: composite: Write SuperSpeedPlus config descriptors")
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>

drivers/usb/gadget/composite.c

@@ -437,12 +437,10 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 		val = CONFIG_USB_GADGET_VBUS_DRAW;
 	if (!val)
 		return 0;
-	switch (speed) {
-	case USB_SPEED_SUPER:
-		return DIV_ROUND_UP(val, 8);
-	default:
+	if (speed < USB_SPEED_SUPER)
 		return DIV_ROUND_UP(val, 2);
-	}
+	else
+		return DIV_ROUND_UP(val, 8);
 }
 
 static int config_buf(struct usb_configuration *config,