ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug

Anders Grafström reports that footbridge fails to build after 1c4a4f4.
Fix this by adding the necessary definitions for __pfn_to_bus and
__bus_to_pfn.

Reported-by: Anders Grafström <anders.grafstrom@netinsight.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-clps711x/include/mach/memory.h

@@ -30,6 +30,8 @@
 
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) - PHYS_OFFSET)
+#define __bus_to_pfn(x)		__phys_to_pfn((x) + PHYS_OFFSET)
 
 #endif
 

arch/arm/mach-footbridge/common.c

@@ -201,6 +201,11 @@ void __init footbridge_map_io(void)
 
 #ifdef CONFIG_FOOTBRIDGE_ADDIN
 
+static inline unsigned long fb_bus_sdram_offset(void)
+{
+	return *CSR_PCISDRAMBASE & 0xfffffff0;
+}
+
 /*
  * These two functions convert virtual addresses to PCI addresses and PCI
  * addresses to virtual addresses.  Note that it is only legal to use these
@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res)
 {
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
-	return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
+	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
 }
 EXPORT_SYMBOL(__virt_to_bus);
 
 unsigned long __bus_to_virt(unsigned long res)
 {
-	res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
-	res += PAGE_OFFSET;
+	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
 
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res)
 }
 EXPORT_SYMBOL(__bus_to_virt);
 
+unsigned long __pfn_to_bus(unsigned long pfn)
+{
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__pfn_to_bus);
+
+unsigned long __bus_to_pfn(unsigned long bus)
+{
+	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__bus_to_pfn);
+
 #endif

arch/arm/mach-footbridge/include/mach/memory.h

@@ -29,6 +29,8 @@
 #ifndef __ASSEMBLY__
 extern unsigned long __virt_to_bus(unsigned long);
 extern unsigned long __bus_to_virt(unsigned long);
+extern unsigned long __pfn_to_bus(unsigned long);
+extern unsigned long __bus_to_pfn(unsigned long);
 #endif
 #define __virt_to_bus	__virt_to_bus
 #define __bus_to_virt	__bus_to_virt
@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long);
 #elif defined(CONFIG_FOOTBRIDGE_HOST)
 
 /*
- * The footbridge is programmed to expose the system RAM at the corresponding
- * address.  So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
- * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
- * The only requirement is that the RAM isn't placed at bus address 0 which
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
  * would clash with VGA cards.
  */
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
+#define BUS_OFFSET		0xe0000000
+#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
+#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #else
 

arch/arm/mach-integrator/include/mach/memory.h

@@ -28,6 +28,7 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #endif

arch/arm/mach-ixp2000/include/mach/memory.h

@@ -17,11 +17,15 @@
 
 #include <mach/ixp2000-regs.h>
 
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+#define IXP2000_PCI_SDRAM_OFFSET	(*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
 
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+#define __phys_to_bus(x)	((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #endif
 

arch/arm/mach-ixp23xx/include/mach/memory.h

@@ -19,16 +19,15 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
 
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+#define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #define arch_is_coherent()	1
 

arch/arm/mach-s3c24a0/include/mach/memory.h

@@ -15,5 +15,7 @@
 
 #define __virt_to_bus(x) __virt_to_phys(x)
 #define __bus_to_virt(x) __phys_to_virt(x)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 
 #endif