[media] rc-core: add TX support to the winbond-cir driver
This patch adds preliminary IR TX capabilities to the winbond-cir driver. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Родитель
67cdd42e06
Коммит
c829f2672f
|
@ -19,11 +19,12 @@
|
|||
* o DSDT dumps
|
||||
*
|
||||
* Supported features:
|
||||
* o IR Receive
|
||||
* o IR Transmit
|
||||
* o Wake-On-CIR functionality
|
||||
*
|
||||
* To do:
|
||||
* o Learning
|
||||
* o IR Transmit
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
@ -50,6 +51,8 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/bitrev.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/wait.h>
|
||||
#include <linux/sched.h>
|
||||
#include <media/rc-core.h>
|
||||
|
||||
#define DRVNAME "winbond-cir"
|
||||
|
@ -118,14 +121,24 @@
|
|||
#define WBCIR_IRQ_NONE 0x00
|
||||
/* RX data bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
|
||||
#define WBCIR_IRQ_RX 0x01
|
||||
/* TX data low bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
|
||||
#define WBCIR_IRQ_TX_LOW 0x02
|
||||
/* Over/Under-flow bit for WBCIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
|
||||
#define WBCIR_IRQ_ERR 0x04
|
||||
/* TX data empty bit for WBCEIR_REG_SP3_IER and WBCIR_REG_SP3_EIR */
|
||||
#define WBCIR_IRQ_TX_EMPTY 0x20
|
||||
/* Led enable/disable bit for WBCIR_REG_ECEIR_CTS */
|
||||
#define WBCIR_LED_ENABLE 0x80
|
||||
/* RX data available bit for WBCIR_REG_SP3_LSR */
|
||||
#define WBCIR_RX_AVAIL 0x01
|
||||
/* RX data overrun error bit for WBCIR_REG_SP3_LSR */
|
||||
#define WBCIR_RX_OVERRUN 0x02
|
||||
/* TX End-Of-Transmission bit for WBCIR_REG_SP3_ASCR */
|
||||
#define WBCIR_TX_EOT 0x04
|
||||
/* RX disable bit for WBCIR_REG_SP3_ASCR */
|
||||
#define WBCIR_RX_DISABLE 0x20
|
||||
/* TX data underrun error bit for WBCIR_REG_SP3_ASCR */
|
||||
#define WBCIR_TX_UNDERRUN 0x40
|
||||
/* Extended mode enable bit for WBCIR_REG_SP3_EXCR1 */
|
||||
#define WBCIR_EXT_ENABLE 0x01
|
||||
/* Select compare register in WBCIR_REG_WCEIR_INDEX (bits 5 & 6) */
|
||||
|
@ -154,6 +167,21 @@ enum wbcir_protocol {
|
|||
IR_PROTOCOL_RC6 = 0x2,
|
||||
};
|
||||
|
||||
/* Possible states for IR reception */
|
||||
enum wbcir_rxstate {
|
||||
WBCIR_RXSTATE_INACTIVE = 0,
|
||||
WBCIR_RXSTATE_ACTIVE,
|
||||
WBCIR_RXSTATE_ERROR
|
||||
};
|
||||
|
||||
/* Possible states for IR transmission */
|
||||
enum wbcir_txstate {
|
||||
WBCIR_TXSTATE_INACTIVE = 0,
|
||||
WBCIR_TXSTATE_ACTIVE,
|
||||
WBCIR_TXSTATE_DONE,
|
||||
WBCIR_TXSTATE_ERROR
|
||||
};
|
||||
|
||||
/* Misc */
|
||||
#define WBCIR_NAME "Winbond CIR"
|
||||
#define WBCIR_ID_FAMILY 0xF1 /* Family ID for the WPCD376I */
|
||||
|
@ -166,22 +194,29 @@ enum wbcir_protocol {
|
|||
/* Per-device data */
|
||||
struct wbcir_data {
|
||||
spinlock_t spinlock;
|
||||
struct rc_dev *dev;
|
||||
struct led_classdev led;
|
||||
|
||||
unsigned long wbase; /* Wake-Up Baseaddr */
|
||||
unsigned long ebase; /* Enhanced Func. Baseaddr */
|
||||
unsigned long sbase; /* Serial Port Baseaddr */
|
||||
unsigned int irq; /* Serial Port IRQ */
|
||||
u8 irqmask;
|
||||
|
||||
struct rc_dev *dev;
|
||||
|
||||
/* RX state */
|
||||
enum wbcir_rxstate rxstate;
|
||||
struct led_trigger *rxtrigger;
|
||||
struct led_trigger *txtrigger;
|
||||
struct led_classdev led;
|
||||
struct ir_raw_event rxev;
|
||||
|
||||
/* RX irdata state */
|
||||
bool irdata_active;
|
||||
bool irdata_error;
|
||||
struct ir_raw_event ev;
|
||||
/* TX state */
|
||||
enum wbcir_txstate txstate;
|
||||
struct led_trigger *txtrigger;
|
||||
u32 txlen;
|
||||
u32 txoff;
|
||||
u32 *txbuf;
|
||||
wait_queue_head_t txwaitq;
|
||||
u8 txmask;
|
||||
u32 txcarrier;
|
||||
};
|
||||
|
||||
static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
|
||||
|
@ -193,6 +228,10 @@ static int invert; /* default = 0 */
|
|||
module_param(invert, bool, 0444);
|
||||
MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
|
||||
|
||||
static int txandrx; /* default = 0 */
|
||||
module_param(txandrx, bool, 0444);
|
||||
MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
|
||||
|
||||
static unsigned int wake_sc = 0x800F040C;
|
||||
module_param(wake_sc, uint, 0644);
|
||||
MODULE_PARM_DESC(wake_sc, "Scancode of the power-on IR command");
|
||||
|
@ -228,6 +267,17 @@ wbcir_select_bank(struct wbcir_data *data, enum wbcir_bank bank)
|
|||
outb(bank, data->sbase + WBCIR_REG_SP3_BSR);
|
||||
}
|
||||
|
||||
static inline void
|
||||
wbcir_set_irqmask(struct wbcir_data *data, u8 irqmask)
|
||||
{
|
||||
if (data->irqmask == irqmask)
|
||||
return;
|
||||
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
outb(irqmask, data->sbase + WBCIR_REG_SP3_IER);
|
||||
data->irqmask = irqmask;
|
||||
}
|
||||
|
||||
static enum led_brightness
|
||||
wbcir_led_brightness_get(struct led_classdev *led_cdev)
|
||||
{
|
||||
|
@ -279,39 +329,15 @@ wbcir_to_rc6cells(u8 val)
|
|||
*
|
||||
*****************************************************************************/
|
||||
|
||||
static irqreturn_t
|
||||
wbcir_irq_handler(int irqno, void *cookie)
|
||||
static void
|
||||
wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device)
|
||||
{
|
||||
struct pnp_dev *device = cookie;
|
||||
struct wbcir_data *data = pnp_get_drvdata(device);
|
||||
unsigned long flags;
|
||||
u8 irdata[8];
|
||||
u8 disable = true;
|
||||
u8 status;
|
||||
int i;
|
||||
bool disable = true;
|
||||
unsigned int i;
|
||||
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
|
||||
status = inb(data->sbase + WBCIR_REG_SP3_EIR);
|
||||
|
||||
if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
/* Check for e.g. buffer overflow */
|
||||
if (status & WBCIR_IRQ_ERR) {
|
||||
data->irdata_error = true;
|
||||
ir_raw_event_reset(data->dev);
|
||||
}
|
||||
|
||||
if (!(status & WBCIR_IRQ_RX))
|
||||
goto out;
|
||||
|
||||
if (!data->irdata_active) {
|
||||
data->irdata_active = true;
|
||||
if (data->rxstate == WBCIR_RXSTATE_INACTIVE) {
|
||||
data->rxstate = WBCIR_RXSTATE_ACTIVE;
|
||||
led_trigger_event(data->rxtrigger, LED_FULL);
|
||||
}
|
||||
|
||||
|
@ -325,28 +351,29 @@ wbcir_irq_handler(int irqno, void *cookie)
|
|||
if (irdata[i] != 0xFF && irdata[i] != 0x00)
|
||||
disable = false;
|
||||
|
||||
if (data->irdata_error)
|
||||
if (data->rxstate == WBCIR_RXSTATE_ERROR)
|
||||
continue;
|
||||
|
||||
pulse = irdata[i] & 0x80 ? false : true;
|
||||
duration = (irdata[i] & 0x7F) * 10000; /* ns */
|
||||
|
||||
if (data->ev.pulse != pulse) {
|
||||
if (data->ev.duration != 0) {
|
||||
ir_raw_event_store(data->dev, &data->ev);
|
||||
data->ev.duration = 0;
|
||||
if (data->rxev.pulse != pulse) {
|
||||
if (data->rxev.duration != 0) {
|
||||
ir_raw_event_store(data->dev, &data->rxev);
|
||||
data->rxev.duration = 0;
|
||||
}
|
||||
|
||||
data->ev.pulse = pulse;
|
||||
data->rxev.pulse = pulse;
|
||||
}
|
||||
|
||||
data->ev.duration += duration;
|
||||
data->rxev.duration += duration;
|
||||
}
|
||||
|
||||
if (disable) {
|
||||
if (data->ev.duration != 0 && !data->irdata_error) {
|
||||
ir_raw_event_store(data->dev, &data->ev);
|
||||
data->ev.duration = 0;
|
||||
if (data->rxev.duration != 0 &&
|
||||
data->rxstate != WBCIR_RXSTATE_ERROR) {
|
||||
ir_raw_event_store(data->dev, &data->rxev);
|
||||
data->rxev.duration = 0;
|
||||
}
|
||||
|
||||
/* Set RXINACTIVE */
|
||||
|
@ -357,19 +384,264 @@ wbcir_irq_handler(int irqno, void *cookie)
|
|||
inb(data->sbase + WBCIR_REG_SP3_RXDATA);
|
||||
|
||||
ir_raw_event_reset(data->dev);
|
||||
data->irdata_error = false;
|
||||
data->irdata_active = false;
|
||||
led_trigger_event(data->rxtrigger, LED_OFF);
|
||||
data->rxstate = WBCIR_RXSTATE_INACTIVE;
|
||||
}
|
||||
|
||||
ir_raw_event_handle(data->dev);
|
||||
}
|
||||
|
||||
static void
|
||||
wbcir_irq_tx(struct wbcir_data *data)
|
||||
{
|
||||
unsigned int space;
|
||||
unsigned int used;
|
||||
u8 bytes[16];
|
||||
u8 byte;
|
||||
|
||||
if (!data->txbuf)
|
||||
return;
|
||||
|
||||
switch (data->txstate) {
|
||||
case WBCIR_TXSTATE_INACTIVE:
|
||||
/* TX FIFO empty */
|
||||
space = 16;
|
||||
led_trigger_event(data->txtrigger, LED_FULL);
|
||||
break;
|
||||
case WBCIR_TXSTATE_ACTIVE:
|
||||
/* TX FIFO low (3 bytes or less) */
|
||||
space = 13;
|
||||
break;
|
||||
case WBCIR_TXSTATE_ERROR:
|
||||
space = 0;
|
||||
break;
|
||||
default:
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* TX data is run-length coded in bytes: YXXXXXXX
|
||||
* Y = space (1) or pulse (0)
|
||||
* X = duration, encoded as (X + 1) * 10us (i.e 10 to 1280 us)
|
||||
*/
|
||||
for (used = 0; used < space && data->txoff != data->txlen; used++) {
|
||||
if (data->txbuf[data->txoff] == 0) {
|
||||
data->txoff++;
|
||||
continue;
|
||||
}
|
||||
byte = min((u32)0x80, data->txbuf[data->txoff]);
|
||||
data->txbuf[data->txoff] -= byte;
|
||||
byte--;
|
||||
byte |= (data->txoff % 2 ? 0x80 : 0x00); /* pulse/space */
|
||||
bytes[used] = byte;
|
||||
}
|
||||
|
||||
while (data->txbuf[data->txoff] == 0 && data->txoff != data->txlen)
|
||||
data->txoff++;
|
||||
|
||||
if (used == 0) {
|
||||
/* Finished */
|
||||
if (data->txstate == WBCIR_TXSTATE_ERROR)
|
||||
/* Clear TX underrun bit */
|
||||
outb(WBCIR_TX_UNDERRUN, data->sbase + WBCIR_REG_SP3_ASCR);
|
||||
else
|
||||
data->txstate = WBCIR_TXSTATE_DONE;
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_RX | WBCIR_IRQ_ERR);
|
||||
led_trigger_event(data->txtrigger, LED_OFF);
|
||||
wake_up(&data->txwaitq);
|
||||
} else if (data->txoff == data->txlen) {
|
||||
/* At the end of transmission, tell the hw before last byte */
|
||||
outsb(data->sbase + WBCIR_REG_SP3_TXDATA, bytes, used - 1);
|
||||
outb(WBCIR_TX_EOT, data->sbase + WBCIR_REG_SP3_ASCR);
|
||||
outb(bytes[used - 1], data->sbase + WBCIR_REG_SP3_TXDATA);
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_RX | WBCIR_IRQ_ERR |
|
||||
WBCIR_IRQ_TX_EMPTY);
|
||||
} else {
|
||||
/* More data to follow... */
|
||||
outsb(data->sbase + WBCIR_REG_SP3_RXDATA, bytes, used);
|
||||
if (data->txstate == WBCIR_TXSTATE_INACTIVE) {
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_RX | WBCIR_IRQ_ERR |
|
||||
WBCIR_IRQ_TX_LOW);
|
||||
data->txstate = WBCIR_TXSTATE_ACTIVE;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t
|
||||
wbcir_irq_handler(int irqno, void *cookie)
|
||||
{
|
||||
struct pnp_dev *device = cookie;
|
||||
struct wbcir_data *data = pnp_get_drvdata(device);
|
||||
unsigned long flags;
|
||||
u8 status;
|
||||
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
status = inb(data->sbase + WBCIR_REG_SP3_EIR);
|
||||
status &= data->irqmask;
|
||||
|
||||
if (!status) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
if (status & WBCIR_IRQ_ERR) {
|
||||
/* RX overflow? (read clears bit) */
|
||||
if (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_OVERRUN) {
|
||||
data->rxstate = WBCIR_RXSTATE_ERROR;
|
||||
ir_raw_event_reset(data->dev);
|
||||
}
|
||||
|
||||
/* TX underflow? */
|
||||
if (inb(data->sbase + WBCIR_REG_SP3_ASCR) & WBCIR_TX_UNDERRUN)
|
||||
data->txstate = WBCIR_TXSTATE_ERROR;
|
||||
}
|
||||
|
||||
if (status & WBCIR_IRQ_RX)
|
||||
wbcir_irq_rx(data, device);
|
||||
|
||||
if (status & (WBCIR_IRQ_TX_LOW | WBCIR_IRQ_TX_EMPTY))
|
||||
wbcir_irq_tx(data);
|
||||
|
||||
out:
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
*
|
||||
* RC-CORE INTERFACE FUNCTIONS
|
||||
*
|
||||
*****************************************************************************/
|
||||
|
||||
static int
|
||||
wbcir_txcarrier(struct rc_dev *dev, u32 carrier)
|
||||
{
|
||||
struct wbcir_data *data = dev->priv;
|
||||
unsigned long flags;
|
||||
u8 val;
|
||||
u32 freq;
|
||||
|
||||
freq = DIV_ROUND_CLOSEST(carrier, 1000);
|
||||
if (freq < 30 || freq > 60)
|
||||
return -EINVAL;
|
||||
|
||||
switch (freq) {
|
||||
case 58:
|
||||
case 59:
|
||||
case 60:
|
||||
val = freq - 58;
|
||||
freq *= 1000;
|
||||
break;
|
||||
case 57:
|
||||
val = freq - 27;
|
||||
freq = 56900;
|
||||
break;
|
||||
default:
|
||||
val = freq - 27;
|
||||
freq *= 1000;
|
||||
break;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
if (data->txstate != WBCIR_TXSTATE_INACTIVE) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
if (data->txcarrier != freq) {
|
||||
wbcir_select_bank(data, WBCIR_BANK_7);
|
||||
wbcir_set_bits(data->sbase + WBCIR_REG_SP3_IRTXMC, val, 0x1F);
|
||||
data->txcarrier = freq;
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
wbcir_txmask(struct rc_dev *dev, u32 mask)
|
||||
{
|
||||
struct wbcir_data *data = dev->priv;
|
||||
unsigned long flags;
|
||||
u8 val;
|
||||
|
||||
/* Four outputs, only one output can be enabled at a time */
|
||||
switch (mask) {
|
||||
case 0x1:
|
||||
val = 0x0;
|
||||
break;
|
||||
case 0x2:
|
||||
val = 0x1;
|
||||
break;
|
||||
case 0x4:
|
||||
val = 0x2;
|
||||
break;
|
||||
case 0x8:
|
||||
val = 0x3;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
if (data->txstate != WBCIR_TXSTATE_INACTIVE) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
if (data->txmask != mask) {
|
||||
wbcir_set_bits(data->ebase + WBCIR_REG_ECEIR_CTS, val, 0x0c);
|
||||
data->txmask = mask;
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
wbcir_tx(struct rc_dev *dev, int *buf, u32 bufsize)
|
||||
{
|
||||
struct wbcir_data *data = dev->priv;
|
||||
u32 count;
|
||||
unsigned i;
|
||||
unsigned long flags;
|
||||
|
||||
/* bufsize has been sanity checked by the caller */
|
||||
count = bufsize / sizeof(int);
|
||||
|
||||
/* Not sure if this is possible, but better safe than sorry */
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
if (data->txstate != WBCIR_TXSTATE_INACTIVE) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
/* Convert values to multiples of 10us */
|
||||
for (i = 0; i < count; i++)
|
||||
buf[i] = DIV_ROUND_CLOSEST(buf[i], 10);
|
||||
|
||||
/* Fill the TX fifo once, the irq handler will do the rest */
|
||||
data->txbuf = buf;
|
||||
data->txlen = count;
|
||||
data->txoff = 0;
|
||||
wbcir_irq_tx(data);
|
||||
|
||||
/* Wait for the TX to complete */
|
||||
while (data->txstate == WBCIR_TXSTATE_ACTIVE) {
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
wait_event(data->txwaitq, data->txstate != WBCIR_TXSTATE_ACTIVE);
|
||||
spin_lock_irqsave(&data->spinlock, flags);
|
||||
}
|
||||
|
||||
/* We're done */
|
||||
if (data->txstate == WBCIR_TXSTATE_ERROR)
|
||||
count = -EAGAIN;
|
||||
data->txstate = WBCIR_TXSTATE_INACTIVE;
|
||||
data->txbuf = NULL;
|
||||
spin_unlock_irqrestore(&data->spinlock, flags);
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
*
|
||||
|
@ -551,21 +823,18 @@ finish:
|
|||
wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_CTL, 0x00, 0x01);
|
||||
}
|
||||
|
||||
/* Disable interrupts */
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
|
||||
|
||||
/* Disable LED */
|
||||
data->irdata_active = false;
|
||||
led_trigger_event(data->rxtrigger, LED_OFF);
|
||||
|
||||
/*
|
||||
* ACPI will set the HW disable bit for SP3 which means that the
|
||||
* output signals are left in an undefined state which may cause
|
||||
* spurious interrupts which we need to ignore until the hardware
|
||||
* is reinitialized.
|
||||
*/
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_NONE);
|
||||
disable_irq(data->irq);
|
||||
|
||||
/* Disable LED */
|
||||
led_trigger_event(data->rxtrigger, LED_OFF);
|
||||
led_trigger_event(data->txtrigger, LED_OFF);
|
||||
}
|
||||
|
||||
static int
|
||||
|
@ -581,8 +850,7 @@ wbcir_init_hw(struct wbcir_data *data)
|
|||
u8 tmp;
|
||||
|
||||
/* Disable interrupts */
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_NONE);
|
||||
|
||||
/* Set PROT_SEL, RX_INV, Clear CEIR_EN (needed for the led) */
|
||||
tmp = protocol << 4;
|
||||
|
@ -606,10 +874,11 @@ wbcir_init_hw(struct wbcir_data *data)
|
|||
outb(0x00, data->ebase + WBCIR_REG_ECEIR_CCTL);
|
||||
|
||||
/*
|
||||
* Clear IR LED, set SP3 clock to 24Mhz
|
||||
* Clear IR LED, set SP3 clock to 24Mhz, set TX mask to IRTX1,
|
||||
* set SP3_IRRX_SW to binary 01, helpfully not documented
|
||||
*/
|
||||
outb(0x10, data->ebase + WBCIR_REG_ECEIR_CTS);
|
||||
data->txmask = 0x1;
|
||||
|
||||
/* Enable extended mode */
|
||||
wbcir_select_bank(data, WBCIR_BANK_2);
|
||||
|
@ -657,18 +926,21 @@ wbcir_init_hw(struct wbcir_data *data)
|
|||
wbcir_select_bank(data, WBCIR_BANK_4);
|
||||
outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR1);
|
||||
|
||||
/* Enable MSR interrupt, Clear AUX_IRX */
|
||||
/* Disable MSR interrupt, clear AUX_IRX, mask RX during TX? */
|
||||
wbcir_select_bank(data, WBCIR_BANK_5);
|
||||
outb(0x00, data->sbase + WBCIR_REG_SP3_IRCR2);
|
||||
outb(txandrx ? 0x03 : 0x02, data->sbase + WBCIR_REG_SP3_IRCR2);
|
||||
|
||||
/* Disable CRC */
|
||||
wbcir_select_bank(data, WBCIR_BANK_6);
|
||||
outb(0x20, data->sbase + WBCIR_REG_SP3_IRCR3);
|
||||
|
||||
/* Set RX/TX (de)modulation freq, not really used */
|
||||
/* Set RX demodulation freq, not really used */
|
||||
wbcir_select_bank(data, WBCIR_BANK_7);
|
||||
outb(0xF2, data->sbase + WBCIR_REG_SP3_IRRXDC);
|
||||
|
||||
/* Set TX modulation, 36kHz, 7us pulse width */
|
||||
outb(0x69, data->sbase + WBCIR_REG_SP3_IRTXMC);
|
||||
data->txcarrier = 36000;
|
||||
|
||||
/* Set invert and pin direction */
|
||||
if (invert)
|
||||
|
@ -683,16 +955,23 @@ wbcir_init_hw(struct wbcir_data *data)
|
|||
/* Clear AUX status bits */
|
||||
outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
|
||||
|
||||
/* Clear IR decoding state */
|
||||
data->irdata_active = false;
|
||||
led_trigger_event(data->rxtrigger, LED_OFF);
|
||||
data->irdata_error = false;
|
||||
data->ev.duration = 0;
|
||||
/* Clear RX state */
|
||||
data->rxstate = WBCIR_RXSTATE_INACTIVE;
|
||||
data->rxev.duration = 0;
|
||||
ir_raw_event_reset(data->dev);
|
||||
ir_raw_event_handle(data->dev);
|
||||
|
||||
/*
|
||||
* Check TX state, if we did a suspend/resume cycle while TX was
|
||||
* active, we will have a process waiting in txwaitq.
|
||||
*/
|
||||
if (data->txstate == WBCIR_TXSTATE_ACTIVE) {
|
||||
data->txstate = WBCIR_TXSTATE_ERROR;
|
||||
wake_up(&data->txwaitq);
|
||||
}
|
||||
|
||||
/* Enable interrupts */
|
||||
outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_RX | WBCIR_IRQ_ERR);
|
||||
}
|
||||
|
||||
static int
|
||||
|
@ -729,6 +1008,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
|
|||
pnp_set_drvdata(device, data);
|
||||
|
||||
spin_lock_init(&data->spinlock);
|
||||
init_waitqueue_head(&data->txwaitq);
|
||||
data->ebase = pnp_port_start(device, 0);
|
||||
data->wbase = pnp_port_start(device, 1);
|
||||
data->sbase = pnp_port_start(device, 2);
|
||||
|
@ -807,6 +1087,10 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
|
|||
data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
|
||||
data->dev->input_id.product = WBCIR_ID_FAMILY;
|
||||
data->dev->input_id.version = WBCIR_ID_CHIP;
|
||||
data->dev->map_name = RC_MAP_RC6_MCE;
|
||||
data->dev->s_tx_mask = wbcir_txmask;
|
||||
data->dev->s_tx_carrier = wbcir_txcarrier;
|
||||
data->dev->tx_ir = wbcir_tx;
|
||||
data->dev->priv = data;
|
||||
data->dev->dev.parent = &device->dev;
|
||||
|
||||
|
@ -849,9 +1133,7 @@ wbcir_remove(struct pnp_dev *device)
|
|||
struct wbcir_data *data = pnp_get_drvdata(device);
|
||||
|
||||
/* Disable interrupts */
|
||||
wbcir_select_bank(data, WBCIR_BANK_0);
|
||||
outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
|
||||
|
||||
wbcir_set_irqmask(data, WBCIR_IRQ_NONE);
|
||||
free_irq(data->irq, device);
|
||||
|
||||
/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
|
||||
|
|
Загрузка…
Ссылка в новой задаче