IIO: hid-sensor-prox: Use generic usage

Use a generic 'hsdev->usage' instead of the HID_USAGE_SENSOR_PROX to
allow this driver to drive the Lenvo custom proximity sensor, which is
registered under a 'custom' usage and not HID_USAGE_SENSOR_PROX.

Add the Lenovo Intelligent Sensing Solution (LISS) human presence sensor
to the platform device ids.

Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Philipp Jungkamp 2022-11-25 00:38:41 +01:00 коммит произвёл Jiri Kosina
Родитель 3a04a1862d
Коммит c8aca355bd
1 изменённых файлов: 23 добавлений и 14 удалений

Просмотреть файл

@ -61,6 +61,7 @@ static int prox_read_raw(struct iio_dev *indio_dev,
long mask)
{
struct prox_state *prox_state = iio_priv(indio_dev);
struct hid_sensor_hub_device *hsdev;
int report_id = -1;
u32 address;
int ret_type;
@ -75,6 +76,7 @@ static int prox_read_raw(struct iio_dev *indio_dev,
report_id = prox_state->prox_attr.report_id;
min = prox_state->prox_attr.logical_minimum;
address = HID_USAGE_SENSOR_HUMAN_PRESENCE;
hsdev = prox_state->common_attributes.hsdev;
break;
default:
report_id = -1;
@ -84,11 +86,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
hid_sensor_power_state(&prox_state->common_attributes,
true);
*val = sensor_hub_input_attr_get_raw_value(
prox_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PROX, address,
report_id,
SENSOR_HUB_SYNC,
min < 0);
hsdev, hsdev->usage, address, report_id,
SENSOR_HUB_SYNC, min < 0);
hid_sensor_power_state(&prox_state->common_attributes,
false);
} else {
@ -191,10 +190,16 @@ static int prox_capture_sample(struct hid_sensor_hub_device *hsdev,
switch (usage_id) {
case HID_USAGE_SENSOR_HUMAN_PRESENCE:
prox_state->human_presence = *(u32 *)raw_data;
ret = 0;
break;
default:
switch (raw_len) {
case 1:
prox_state->human_presence = *(u8 *)raw_data;
return 0;
case 4:
prox_state->human_presence = *(u32 *)raw_data;
return 0;
default:
break;
}
break;
}
@ -244,7 +249,7 @@ static int hid_prox_probe(struct platform_device *pdev)
prox_state->common_attributes.hsdev = hsdev;
prox_state->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev, HID_USAGE_SENSOR_PROX,
ret = hid_sensor_parse_common_attributes(hsdev, hsdev->usage,
&prox_state->common_attributes,
prox_sensitivity_addresses,
ARRAY_SIZE(prox_sensitivity_addresses));
@ -262,7 +267,7 @@ static int hid_prox_probe(struct platform_device *pdev)
ret = prox_parse_report(pdev, hsdev,
(struct iio_chan_spec *)indio_dev->channels,
HID_USAGE_SENSOR_PROX, prox_state);
hsdev->usage, prox_state);
if (ret) {
dev_err(&pdev->dev, "failed to setup attributes\n");
return ret;
@ -291,8 +296,8 @@ static int hid_prox_probe(struct platform_device *pdev)
prox_state->callbacks.send_event = prox_proc_event;
prox_state->callbacks.capture_sample = prox_capture_sample;
prox_state->callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_PROX,
&prox_state->callbacks);
ret = sensor_hub_register_callback(hsdev, hsdev->usage,
&prox_state->callbacks);
if (ret < 0) {
dev_err(&pdev->dev, "callback reg failed\n");
goto error_iio_unreg;
@ -314,7 +319,7 @@ static int hid_prox_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct prox_state *prox_state = iio_priv(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_PROX);
sensor_hub_remove_callback(hsdev, hsdev->usage);
iio_device_unregister(indio_dev);
hid_sensor_remove_trigger(indio_dev, &prox_state->common_attributes);
@ -326,6 +331,10 @@ static const struct platform_device_id hid_prox_ids[] = {
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200011",
},
{
/* Format: HID-SENSOR-tag-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-LISS-0226",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_prox_ids);