microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'Space-cleanup' 

Arnd Bergmann says:

====================
drivers/net/Space.c cleanup

I discovered that there are still a couple of drivers that rely on
beiong statically initialized from drivers/net/Space.c the way
we did in the last century. As it turns out, there are a couple
of simplifications that can be made here, as well as some minor
bugfixes.

There are four classes of drivers that use this:

- most 10mbit ISA bus ethernet drivers (and one 100mbit one)
- both ISA localtalk drivers
- several m68k ethernet drivers
- one obsolete WAN driver

I found that the drivers using in arch/m68k/ don't actually benefit
from being probed this way as they do not rely on the netdev= command
line arguments, they have simply never been changed to work like a
modern driver.

I had previously sent a patch to remove the sbni/granch driver, and
there were no objections to this patch but forgot to resend it after
some discussion about another patch in the same series.

For the ISA drivers, there is usually no way to probe multiple devices
at boot time other than the netdev= arguments, so all that logic is left
in place for the moment, but centralized in a single file that only gets
included in the kernel build if one or more of the drivers are built-in.

I'm also changing the old-style init_module() functions in these drivers
to static functions with a module_init() annotation, to more closely
resemble modern drivers. These are the last drivers in the kernel to
still use init_module/cleanup_module, removing those may enable future
cleanups to the module loading process.

       Arnd

Changes in v2:

- replace xsurf100 change with Michael's version
- make it PATCH instead of RFC
- rebase to net-next as of August 3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2021-08-03 13:05:27 +01:00
Родитель 2dbf4c2e7e a07d8ecf6b
Коммит c8f6c77d06
42 изменённых файлов: 271 добавлений и 2162 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/admin-guide/kernel-parameters.txt
Просмотреть файл

@ -4945,8 +4945,6 @@
sa1100ir [NET]
See drivers/net/irda/sa1100_ir.c.
sbni= [NET] Granch SBNI12 leased line adapter
sched_verbose [KNL] Enables verbose scheduler debug messages.
schedstats= [KNL,X86] Enable or disable scheduled statistics.

7
drivers/net/Kconfig
Просмотреть файл

@ -606,4 +606,11 @@ config NET_FAILOVER
a VM with direct attached VF by failing over to the paravirtual
datapath when the VF is unplugged.
config NETDEV_LEGACY_INIT
bool
depends on ISA
help
Drivers that call netdev_boot_setup_check() should select this
symbol, everything else no longer needs it.
endif # NETDEVICES

3
drivers/net/Makefile
Просмотреть файл

@ -18,7 +18,8 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET) += loopback.o
obj-$(CONFIG_NETDEV_LEGACY_INIT) += Space.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-y += phy/
obj-y += mdio/

178
drivers/net/Space.c
Просмотреть файл

@ -30,6 +30,148 @@
#include <linux/netlink.h>
#include <net/Space.h>
/*
* This structure holds boot-time configured netdevice settings. They
* are then used in the device probing.
*/
struct netdev_boot_setup {
char name[IFNAMSIZ];
struct ifmap map;
};
#define NETDEV_BOOT_SETUP_MAX 8
/******************************************************************************
*
* Device Boot-time Settings Routines
*
******************************************************************************/
/* Boot time configuration table */
static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
/**
* netdev_boot_setup_add - add new setup entry
* @name: name of the device
* @map: configured settings for the device
*
* Adds new setup entry to the dev_boot_setup list. The function
* returns 0 on error and 1 on success. This is a generic routine to
* all netdevices.
*/
static int netdev_boot_setup_add(char *name, struct ifmap *map)
{
struct netdev_boot_setup *s;
int i;
s = dev_boot_setup;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
memset(s[i].name, 0, sizeof(s[i].name));
strlcpy(s[i].name, name, IFNAMSIZ);
memcpy(&s[i].map, map, sizeof(s[i].map));
break;
}
}
return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
}
/**
* netdev_boot_setup_check - check boot time settings
* @dev: the netdevice
*
* Check boot time settings for the device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found, 1 if they are.
*/
int netdev_boot_setup_check(struct net_device *dev)
{
struct netdev_boot_setup *s = dev_boot_setup;
int i;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
!strcmp(dev->name, s[i].name)) {
dev->irq = s[i].map.irq;
dev->base_addr = s[i].map.base_addr;
dev->mem_start = s[i].map.mem_start;
dev->mem_end = s[i].map.mem_end;
return 1;
}
}
return 0;
}
EXPORT_SYMBOL(netdev_boot_setup_check);
/**
* netdev_boot_base - get address from boot time settings
* @prefix: prefix for network device
* @unit: id for network device
*
* Check boot time settings for the base address of device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found.
*/
static unsigned long netdev_boot_base(const char *prefix, int unit)
{
const struct netdev_boot_setup *s = dev_boot_setup;
char name[IFNAMSIZ];
int i;
sprintf(name, "%s%d", prefix, unit);
/*
* If device already registered then return base of 1
* to indicate not to probe for this interface
*/
if (__dev_get_by_name(&init_net, name))
return 1;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
if (!strcmp(name, s[i].name))
return s[i].map.base_addr;
return 0;
}
/*
* Saves at boot time configured settings for any netdevice.
*/
static int __init netdev_boot_setup(char *str)
{
int ints[5];
struct ifmap map;
str = get_options(str, ARRAY_SIZE(ints), ints);
if (!str || !*str)
return 0;
/* Save settings */
memset(&map, 0, sizeof(map));
if (ints[0] > 0)
map.irq = ints[1];
if (ints[0] > 1)
map.base_addr = ints[2];
if (ints[0] > 2)
map.mem_start = ints[3];
if (ints[0] > 3)
map.mem_end = ints[4];
/* Add new entry to the list */
return netdev_boot_setup_add(str, &map);
}
__setup("netdev=", netdev_boot_setup);
static int __init ether_boot_setup(char *str)
{
return netdev_boot_setup(str);
}
__setup("ether=", ether_boot_setup);
/* A unified ethernet device probe. This is the easiest way to have every
* ethernet adaptor have the name "eth[0123...]".
*/
@ -77,39 +219,15 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_SMC9194
{smc_init, 0},
#endif
#ifdef CONFIG_CS89x0
#ifndef CONFIG_CS89x0_PLATFORM
#ifdef CONFIG_CS89x0_ISA
{cs89x0_probe, 0},
#endif
#endif
#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */
{i82596_probe, 0}, /* I82596 */
#endif
#ifdef CONFIG_NI65
{ni65_probe, 0},
#endif
{NULL, 0},
};
static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */
{atarilance_probe, 0},
#endif
#ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */
{sun3lance_probe, 0},
#endif
#ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */
{sun3_82586_probe, 0},
#endif
#ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */
{apne_probe, 0},
#endif
#ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */
{mvme147lance_probe, 0},
#endif
{NULL, 0},
};
/* Unified ethernet device probe, segmented per architecture and
* per bus interface. This drives the legacy devices only for now.
*/
@ -121,8 +239,7 @@ static void __init ethif_probe2(int unit)
if (base_addr == 1)
return;
(void)(probe_list2(unit, m68k_probes, base_addr == 0) &&
probe_list2(unit, isa_probes, base_addr == 0));
probe_list2(unit, isa_probes, base_addr == 0);
}
/* Statically configured drivers -- order matters here. */
@ -130,10 +247,6 @@ static int __init net_olddevs_init(void)
{
int num;
#ifdef CONFIG_SBNI
for (num = 0; num < 8; ++num)
sbni_probe(num);
#endif
for (num = 0; num < 8; ++num)
ethif_probe2(num);
@ -142,9 +255,6 @@ static int __init net_olddevs_init(void)
cops_probe(1);
cops_probe(2);
#endif
#ifdef CONFIG_LTPC
ltpc_probe();
#endif
return 0;
}

4
drivers/net/appletalk/Kconfig
Просмотреть файл

@ -52,7 +52,9 @@ config LTPC
config COPS
tristate "COPS LocalTalk PC support"
depends on DEV_APPLETALK && (ISA || EISA)
depends on DEV_APPLETALK && ISA
depends on NETDEVICES
select NETDEV_LEGACY_INIT
help
This allows you to use COPS AppleTalk cards to connect to LocalTalk
networks. You also need version 1.3.3 or later of the netatalk

7
drivers/net/appletalk/ltpc.c
Просмотреть файл

@ -1015,7 +1015,7 @@ static const struct net_device_ops ltpc_netdev = {
.ndo_set_rx_mode = set_multicast_list,
};
struct net_device * __init ltpc_probe(void)
static struct net_device * __init ltpc_probe(void)
{
struct net_device *dev;
int err = -ENOMEM;
@ -1221,12 +1221,10 @@ static int __init ltpc_setup(char *str)
}
__setup("ltpc=", ltpc_setup);
#endif /* MODULE */
#endif
static struct net_device *dev_ltpc;
#ifdef MODULE
MODULE_LICENSE("GPL");
module_param(debug, int, 0);
module_param_hw(io, int, ioport, 0);
@ -1244,7 +1242,6 @@ static int __init ltpc_module_init(void)
return PTR_ERR_OR_ZERO(dev_ltpc);
}
module_init(ltpc_module_init);
#endif
static void __exit ltpc_cleanup(void)
{

3
drivers/net/ethernet/3com/3c509.c
Просмотреть файл

@ -302,7 +302,6 @@ static int el3_isa_match(struct device *pdev, unsigned int ndev)
return -ENOMEM;
SET_NETDEV_DEV(dev, pdev);
netdev_boot_setup_check(dev);
if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
free_netdev(dev);
@ -421,7 +420,6 @@ static int el3_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
netdev_boot_setup_check(dev);
el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP);
pnp_set_drvdata(pdev, dev);
@ -590,7 +588,6 @@ static int el3_eisa_probe(struct device *device)
}
SET_NETDEV_DEV(dev, device);
netdev_boot_setup_check(dev);
el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
eisa_set_drvdata (edev, dev);

3
drivers/net/ethernet/3com/3c515.c
Просмотреть файл

@ -407,7 +407,7 @@ MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt
/* we will need locking (and refcounting) if we ever use it for more */
static LIST_HEAD(root_corkscrew_dev);
int init_module(void)
static int corkscrew_init_module(void)
{
int found = 0;
if (debug >= 0)
@ -416,6 +416,7 @@ int init_module(void)
found++;
return found ? 0 : -ENODEV;
}
module_init(corkscrew_init_module);
#else
struct net_device *tc515_probe(int unit)

1
drivers/net/ethernet/3com/Kconfig
Просмотреть файл

@ -34,6 +34,7 @@ config EL3
config 3C515
tristate "3c515 ISA \"Fast EtherLink\""
depends on ISA && ISA_DMA_API && !PPC32
select NETDEV_LEGACY_INIT
help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y here.

3
drivers/net/ethernet/8390/Kconfig
Просмотреть файл

@ -102,6 +102,7 @@ config MCF8390
config NE2000
tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
select NETDEV_LEGACY_INIT if ISA
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.
@ -169,6 +170,7 @@ config STNIC
config ULTRA
tristate "SMC Ultra support"
depends on ISA
select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.
@ -186,6 +188,7 @@ config ULTRA
config WD80x3
tristate "WD80*3 support"
depends on ISA
select NETDEV_LEGACY_INIT
select CRC32
help
If you have a network (Ethernet) card of this type, say Y here.

11
drivers/net/ethernet/8390/apne.c
Просмотреть файл

@ -75,7 +75,6 @@
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
struct net_device * __init apne_probe(int unit);
static int apne_probe1(struct net_device *dev, int ioaddr);
static void apne_reset_8390(struct net_device *dev);
@ -120,7 +119,7 @@ static u32 apne_msg_enable;
module_param_named(msg_enable, apne_msg_enable, uint, 0444);
MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)");
struct net_device * __init apne_probe(int unit)
static struct net_device * __init apne_probe(void)
{
struct net_device *dev;
struct ei_device *ei_local;
@ -150,10 +149,6 @@ struct net_device * __init apne_probe(int unit)
dev = alloc_ei_netdev();
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
}
ei_local = netdev_priv(dev);
ei_local->msg_enable = apne_msg_enable;
@ -554,12 +549,11 @@ static irqreturn_t apne_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
#ifdef MODULE
static struct net_device *apne_dev;
static int __init apne_module_init(void)
{
apne_dev = apne_probe(-1);
apne_dev = apne_probe();
return PTR_ERR_OR_ZERO(apne_dev);
}
@ -579,7 +573,6 @@ static void __exit apne_module_exit(void)
}
module_init(apne_module_init);
module_exit(apne_module_exit);
#endif
static int init_pcmcia(void)
{

7
drivers/net/ethernet/8390/ax88796.c
Просмотреть файл

@ -101,6 +101,13 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
return (struct ax_device *)(ei_local + 1);
}
void ax_NS8390_reinit(struct net_device *dev)
{
ax_NS8390_init(dev, 1);
}
EXPORT_SYMBOL_GPL(ax_NS8390_reinit);
/*
* ax_initial_check
*

5
drivers/net/ethernet/8390/ne.c
Просмотреть файл

@ -923,7 +923,7 @@ static void __init ne_add_devices(void)
}
#ifdef MODULE
int __init init_module(void)
static int __init ne_init(void)
{
int retval;
ne_add_devices();
@ -940,6 +940,7 @@ int __init init_module(void)
ne_loop_rm_unreg(0);
return retval;
}
module_init(ne_init);
#else /* MODULE */
static int __init ne_init(void)
{
@ -951,6 +952,7 @@ static int __init ne_init(void)
}
module_init(ne_init);
#ifdef CONFIG_NETDEV_LEGACY_INIT
struct net_device * __init ne_probe(int unit)
{
int this_dev;
@ -991,6 +993,7 @@ struct net_device * __init ne_probe(int unit)
return ERR_PTR(-ENODEV);
}
#endif
#endif /* MODULE */
static void __exit ne_exit(void)

9
drivers/net/ethernet/8390/smc-ultra.c
Просмотреть файл

@ -522,7 +522,6 @@ static void ultra_pio_input(struct net_device *dev, int count,
/* We know skbuffs are padded to at least word alignment. */
insw(ioaddr + IOPD, buf, (count+1)>>1);
}
static void ultra_pio_output(struct net_device *dev, int count,
const unsigned char *buf, const int start_page)
{
@ -572,8 +571,7 @@ MODULE_LICENSE("GPL");
/* This is set up so that only a single autoprobe takes place per call.
ISA device autoprobes on a running machine are not recommended. */
int __init
init_module(void)
static int __init ultra_init_module(void)
{
struct net_device *dev;
int this_dev, found = 0;
@ -600,6 +598,7 @@ init_module(void)
return 0;
return -ENXIO;
}
module_init(ultra_init_module);
static void cleanup_card(struct net_device *dev)
{
@ -613,8 +612,7 @@ static void cleanup_card(struct net_device *dev)
iounmap(ei_status.mem);
}
void __exit
cleanup_module(void)
static void __exit ultra_cleanup_module(void)
{
int this_dev;
@ -627,4 +625,5 @@ cleanup_module(void)
}
}
}
module_exit(ultra_cleanup_module);
#endif /* MODULE */

7
drivers/net/ethernet/8390/wd.c
Просмотреть файл

@ -519,7 +519,7 @@ MODULE_LICENSE("GPL");
/* This is set up so that only a single autoprobe takes place per call.
ISA device autoprobes on a running machine are not recommended. */
int __init init_module(void)
static int __init wd_init_module(void)
{
struct net_device *dev;
int this_dev, found = 0;
@ -548,6 +548,7 @@ int __init init_module(void)
return 0;
return -ENXIO;
}
module_init(wd_init_module);
static void cleanup_card(struct net_device *dev)
{
@ -556,8 +557,7 @@ static void cleanup_card(struct net_device *dev)
iounmap(ei_status.mem);
}
void __exit
cleanup_module(void)
static void __exit wd_cleanup_module(void)
{
int this_dev;
@ -570,4 +570,5 @@ cleanup_module(void)
}
}
}
module_exit(wd_cleanup_module);
#endif /* MODULE */

9
drivers/net/ethernet/8390/xsurf100.c
Просмотреть файл

@ -22,8 +22,6 @@
#define XS100_8390_DATA_WRITE32_BASE 0x0C80
#define XS100_8390_DATA_AREA_SIZE 0x80
#define __NS8390_init ax_NS8390_init
/* force unsigned long back to 'void __iomem *' */
#define ax_convert_addr(_a) ((void __force __iomem *)(_a))
@ -42,10 +40,7 @@
/* Ensure we have our RCR base value */
#define AX88796_PLATFORM
static unsigned char version[] =
"ax88796.c: Copyright 2005,2007 Simtec Electronics\n";
#include "lib8390.c"
#include "8390.h"
/* from ne.c */
#define NE_CMD EI_SHIFT(0x00)
@ -232,7 +227,7 @@ static void xs100_block_output(struct net_device *dev, int count,
if (jiffies - dma_start > 2 * HZ / 100) { /* 20ms */
netdev_warn(dev, "timeout waiting for Tx RDC.\n");
ei_local->reset_8390(dev);
ax_NS8390_init(dev, 1);
ax_NS8390_reinit(dev);
break;
}
}

2
drivers/net/ethernet/amd/Kconfig
Просмотреть файл

@ -46,6 +46,7 @@ config AMD8111_ETH
config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
select NETDEV_LEGACY_INIT
help
If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type.
@ -132,6 +133,7 @@ config PCMCIA_NMCLAN
config NI65
tristate "NI6510 support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32
select NETDEV_LEGACY_INIT
help
If you have a network (Ethernet) card of this type, say Y here.

11
drivers/net/ethernet/amd/atarilance.c
Просмотреть файл

@ -367,7 +367,7 @@ static void *slow_memcpy( void *dst, const void *src, size_t len )
}
struct net_device * __init atarilance_probe(int unit)
struct net_device * __init atarilance_probe(void)
{
int i;
static int found;
@ -382,10 +382,6 @@ struct net_device * __init atarilance_probe(int unit)
dev = alloc_etherdev(sizeof(struct lance_private));
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
}
for( i = 0; i < N_LANCE_ADDR; ++i ) {
if (lance_probe1( dev, &lance_addr_list[i] )) {
@ -1137,13 +1133,11 @@ static int lance_set_mac_address( struct net_device *dev, void *addr )
return 0;
}
#ifdef MODULE
static struct net_device *atarilance_dev;
static int __init atarilance_module_init(void)
{
atarilance_dev = atarilance_probe(-1);
atarilance_dev = atarilance_probe();
return PTR_ERR_OR_ZERO(atarilance_dev);
}
@ -1155,4 +1149,3 @@ static void __exit atarilance_module_exit(void)
}
module_init(atarilance_module_init);
module_exit(atarilance_module_exit);
#endif /* MODULE */

6
drivers/net/ethernet/amd/lance.c
Просмотреть файл

@ -327,7 +327,7 @@ MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)");
MODULE_PARM_DESC(irq, "LANCE/PCnet IRQ number (ignored for some devices)");
MODULE_PARM_DESC(lance_debug, "LANCE/PCnet debug level (0-7)");
int __init init_module(void)
static int __init lance_init_module(void)
{
struct net_device *dev;
int this_dev, found = 0;
@ -356,6 +356,7 @@ int __init init_module(void)
return 0;
return -ENXIO;
}
module_init(lance_init_module);
static void cleanup_card(struct net_device *dev)
{
@ -368,7 +369,7 @@ static void cleanup_card(struct net_device *dev)
kfree(lp);
}
void __exit cleanup_module(void)
static void __exit lance_cleanup_module(void)
{
int this_dev;
@ -381,6 +382,7 @@ void __exit cleanup_module(void)
}
}
}
module_exit(lance_cleanup_module);
#endif /* MODULE */
MODULE_LICENSE("GPL");

16
drivers/net/ethernet/amd/mvme147.c
Просмотреть файл

@ -68,7 +68,7 @@ static const struct net_device_ops lance_netdev_ops = {
};
/* Initialise the one and only on-board 7990 */
struct net_device * __init mvme147lance_probe(int unit)
static struct net_device * __init mvme147lance_probe(void)
{
struct net_device *dev;
static int called;
@ -86,9 +86,6 @@ struct net_device * __init mvme147lance_probe(int unit)
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0)
sprintf(dev->name, "eth%d", unit);
/* Fill the dev fields */
dev->base_addr = (unsigned long)MVME147_LANCE_BASE;
dev->netdev_ops = &lance_netdev_ops;
@ -179,22 +176,21 @@ static int m147lance_close(struct net_device *dev)
return 0;
}
#ifdef MODULE
MODULE_LICENSE("GPL");
static struct net_device *dev_mvme147_lance;
int __init init_module(void)
static int __init m147lance_init(void)
{
dev_mvme147_lance = mvme147lance_probe(-1);
dev_mvme147_lance = mvme147lance_probe();
return PTR_ERR_OR_ZERO(dev_mvme147_lance);
}
module_init(m147lance_init);
void __exit cleanup_module(void)
static void __exit m147lance_exit(void)
{
struct m147lance_private *lp = netdev_priv(dev_mvme147_lance);
unregister_netdev(dev_mvme147_lance);
free_pages(lp->ram, 3);
free_netdev(dev_mvme147_lance);
}
#endif /* MODULE */
module_exit(m147lance_exit);

6
drivers/net/ethernet/amd/ni65.c
Просмотреть файл

@ -1230,18 +1230,20 @@ MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)");
MODULE_PARM_DESC(io, "ni6510 I/O base address");
MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
int __init init_module(void)
static int __init ni65_init_module(void)
{
dev_ni65 = ni65_probe(-1);
return PTR_ERR_OR_ZERO(dev_ni65);
}
module_init(ni65_init_module);
void __exit cleanup_module(void)
static void __exit ni65_cleanup_module(void)
{
unregister_netdev(dev_ni65);
cleanup_card(dev_ni65);
free_netdev(dev_ni65);
}
module_exit(ni65_cleanup_module);
#endif /* MODULE */
MODULE_LICENSE("GPL");

19
drivers/net/ethernet/amd/sun3lance.c
Просмотреть файл

@ -245,7 +245,7 @@ static void set_multicast_list( struct net_device *dev );
/************************* End of Prototypes **************************/
struct net_device * __init sun3lance_probe(int unit)
static struct net_device * __init sun3lance_probe(void)
{
struct net_device *dev;
static int found;
@ -272,10 +272,6 @@ struct net_device * __init sun3lance_probe(int unit)
dev = alloc_etherdev(sizeof(struct lance_private));
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
}
if (!lance_probe(dev))
goto out;
@ -924,17 +920,16 @@ static void set_multicast_list( struct net_device *dev )
}
#ifdef MODULE
static struct net_device *sun3lance_dev;
int __init init_module(void)
static int __init sun3lance_init(void)
{
sun3lance_dev = sun3lance_probe(-1);
sun3lance_dev = sun3lance_probe();
return PTR_ERR_OR_ZERO(sun3lance_dev);
}
module_init(sun3lance_init);
void __exit cleanup_module(void)
static void __exit sun3lance_cleanup(void)
{
unregister_netdev(sun3lance_dev);
#ifdef CONFIG_SUN3
@ -942,6 +937,4 @@ void __exit cleanup_module(void)
#endif
free_netdev(sun3lance_dev);
}
#endif /* MODULE */
module_exit(sun3lance_cleanup);

2
drivers/net/ethernet/broadcom/genet/bcmgenet.c
Просмотреть файл

@ -3972,8 +3972,6 @@ static int bcmgenet_probe(struct platform_device *pdev)
*/
dev->needed_headroom += 64;
netdev_boot_setup_check(dev);
priv->dev = dev;
priv->pdev = pdev;

27
drivers/net/ethernet/cirrus/Kconfig
Просмотреть файл

@ -6,7 +6,7 @@
config NET_VENDOR_CIRRUS
bool "Cirrus devices"
default y
depends on ISA || EISA || ARM || MAC
depends on ISA || EISA || ARM || MAC || COMPILE_TEST
help
If you have a network (Ethernet) card belonging to this class, say Y.
@ -18,9 +18,16 @@ config NET_VENDOR_CIRRUS
if NET_VENDOR_CIRRUS
config CS89x0
tristate "CS89x0 support"
depends on ISA || EISA || ARM
tristate
config CS89x0_ISA
tristate "CS89x0 ISA driver support"
depends on HAS_IOPORT_MAP
depends on ISA
depends on !PPC32
depends on CS89x0_PLATFORM=n
select NETDEV_LEGACY_INIT
select CS89x0
help
Support for CS89x0 chipset based Ethernet cards. If you have a
network (Ethernet) card of this type, say Y and read the file
@ -30,15 +37,15 @@ config CS89x0
will be called cs89x0.
config CS89x0_PLATFORM
bool "CS89x0 platform driver support" if HAS_IOPORT_MAP
default !HAS_IOPORT_MAP
depends on CS89x0
tristate "CS89x0 platform driver support"
depends on ARM || COMPILE_TEST
select CS89x0
help
Say Y to compile the cs89x0 driver as a platform driver. This
makes this driver suitable for use on certain evaluation boards
such as the iMX21ADS.
Say Y to compile the cs89x0 platform driver. This makes this driver
suitable for use on certain evaluation boards such as the iMX21ADS.
If you are unsure, say N.
To compile this driver as a module, choose M here. The module
will be called cs89x0.
config EP93XX_ETH
tristate "EP93xx Ethernet support"

31
drivers/net/ethernet/cirrus/cs89x0.c
Просмотреть файл

@ -104,7 +104,7 @@ static char version[] __initdata =
* them to system IRQ numbers. This mapping is card specific and is set to
* the configuration of the Cirrus Eval board for this chip.
*/
#ifndef CONFIG_CS89x0_PLATFORM
#if IS_ENABLED(CONFIG_CS89x0_ISA)
static unsigned int netcard_portlist[] __used __initdata = {
0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240,
0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0
@ -292,7 +292,7 @@ write_irq(struct net_device *dev, int chip_type, int irq)
int i;
if (chip_type == CS8900) {
#ifndef CONFIG_CS89x0_PLATFORM
#if IS_ENABLED(CONFIG_CS89x0_ISA)
/* Search the mapping table for the corresponding IRQ pin. */
for (i = 0; i != ARRAY_SIZE(cs8900_irq_map); i++)
if (cs8900_irq_map[i] == irq)
@ -859,7 +859,7 @@ net_open(struct net_device *dev)
goto bad_out;
}
} else {
#if !defined(CONFIG_CS89x0_PLATFORM)
#if IS_ENABLED(CONFIG_CS89x0_ISA)
if (((1 << dev->irq) & lp->irq_map) == 0) {
pr_err("%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
@ -1523,7 +1523,7 @@ cs89x0_probe1(struct net_device *dev, void __iomem *ioaddr, int modular)
dev->irq = i;
} else {
i = lp->isa_config & INT_NO_MASK;
#ifndef CONFIG_CS89x0_PLATFORM
#if IS_ENABLED(CONFIG_CS89x0_ISA)
if (lp->chip_type == CS8900) {
/* Translate the IRQ using the IRQ mapping table. */
if (i >= ARRAY_SIZE(cs8900_irq_map))
@ -1576,7 +1576,7 @@ out1:
return retval;
}
#ifndef CONFIG_CS89x0_PLATFORM
#if IS_ENABLED(CONFIG_CS89x0_ISA)
/*
* This function converts the I/O port address used by the cs89x0_probe() and
* init_module() functions to the I/O memory address used by the
@ -1682,11 +1682,7 @@ out:
pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");
return ERR_PTR(err);
}
#endif
#endif
#if defined(MODULE) && !defined(CONFIG_CS89x0_PLATFORM)
#else
static struct net_device *dev_cs89x0;
/* Support the 'debug' module parm even if we're compiled for non-debug to
@ -1757,9 +1753,9 @@ MODULE_LICENSE("GPL");
* (hw or software util)
*/
int __init init_module(void)
static int __init cs89x0_isa_init_module(void)
{
struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
struct net_device *dev;
struct net_local *lp;
int ret = 0;
@ -1768,6 +1764,7 @@ int __init init_module(void)
#else
debug = 0;
#endif
dev = alloc_etherdev(sizeof(struct net_local));
if (!dev)
return -ENOMEM;
@ -1826,9 +1823,9 @@ out:
free_netdev(dev);
return ret;
}
module_init(cs89x0_isa_init_module);
void __exit
cleanup_module(void)
static void __exit cs89x0_isa_cleanup_module(void)
{
struct net_local *lp = netdev_priv(dev_cs89x0);
@ -1838,9 +1835,11 @@ cleanup_module(void)
release_region(dev_cs89x0->base_addr, NETCARD_IO_EXTENT);
free_netdev(dev_cs89x0);
}
#endif /* MODULE && !CONFIG_CS89x0_PLATFORM */
module_exit(cs89x0_isa_cleanup_module);
#endif /* MODULE */
#endif /* CONFIG_CS89x0_ISA */
#ifdef CONFIG_CS89x0_PLATFORM
#if IS_ENABLED(CONFIG_CS89x0_PLATFORM)
static int __init cs89x0_platform_probe(struct platform_device *pdev)
{
struct net_device *dev = alloc_etherdev(sizeof(struct net_local));

24
drivers/net/ethernet/i825xx/82596.c
Просмотреть файл

@ -1110,9 +1110,6 @@ static void print_eth(unsigned char *add, char *str)
add, add + 6, add, add[12], add[13], str);
}
static int io = 0x300;
static int irq = 10;
static const struct net_device_ops i596_netdev_ops = {
.ndo_open = i596_open,
.ndo_stop = i596_close,
@ -1123,7 +1120,7 @@ static const struct net_device_ops i596_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
struct net_device * __init i82596_probe(int unit)
static struct net_device * __init i82596_probe(void)
{
struct net_device *dev;
int i;
@ -1140,14 +1137,6 @@ struct net_device * __init i82596_probe(int unit)
if (!dev)
return ERR_PTR(-ENOMEM);
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
} else {
dev->base_addr = io;
dev->irq = irq;
}
#ifdef ENABLE_MVME16x_NET
if (MACH_IS_MVME16x) {
if (mvme16x_config & MVME16x_CONFIG_NO_ETHERNET) {
@ -1515,22 +1504,22 @@ static void set_multicast_list(struct net_device *dev)
}
}
#ifdef MODULE
static struct net_device *dev_82596;
static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "i82596 debug mask");
int __init init_module(void)
static int __init i82596_init(void)
{
if (debug >= 0)
i596_debug = debug;
dev_82596 = i82596_probe(-1);
dev_82596 = i82596_probe();
return PTR_ERR_OR_ZERO(dev_82596);
}
module_init(i82596_init);
void __exit cleanup_module(void)
static void __exit i82596_cleanup(void)
{
unregister_netdev(dev_82596);
#ifdef __mc68000__
@ -1544,5 +1533,4 @@ void __exit cleanup_module(void)
free_page ((u32)(dev_82596->mem_start));
free_netdev(dev_82596);
}
#endif /* MODULE */
module_exit(i82596_cleanup);

17
drivers/net/ethernet/i825xx/sun3_82586.c
Просмотреть файл

@ -29,6 +29,7 @@ static int rfdadd = 0; /* rfdadd=1 may be better for 8K MEM cards */
static int fifo=0x8; /* don't change */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
@ -276,7 +277,7 @@ static void alloc586(struct net_device *dev)
memset((char *)p->scb,0,sizeof(struct scb_struct));
}
struct net_device * __init sun3_82586_probe(int unit)
static int __init sun3_82586_probe(void)
{
struct net_device *dev;
unsigned long ioaddr;
@ -291,25 +292,20 @@ struct net_device * __init sun3_82586_probe(int unit)
break;
default:
return ERR_PTR(-ENODEV);
return -ENODEV;
}
if (found)
return ERR_PTR(-ENODEV);
return -ENODEV;
ioaddr = (unsigned long)ioremap(IE_OBIO, SUN3_82586_TOTAL_SIZE);
if (!ioaddr)
return ERR_PTR(-ENOMEM);
return -ENOMEM;
found = 1;
dev = alloc_etherdev(sizeof(struct priv));
if (!dev)
goto out;
if (unit >= 0) {
sprintf(dev->name, "eth%d", unit);
netdev_boot_setup_check(dev);
}
dev->irq = IE_IRQ;
dev->base_addr = ioaddr;
err = sun3_82586_probe1(dev, ioaddr);
@ -326,8 +322,9 @@ out1:
free_netdev(dev);
out:
iounmap((void __iomem *)ioaddr);
return ERR_PTR(err);
return err;
}
module_init(sun3_82586_probe);
static const struct net_device_ops sun3_82586_netdev_ops = {
.ndo_open = sun3_82586_open,

2
drivers/net/ethernet/natsemi/jazzsonic.c
Просмотреть файл

@ -193,8 +193,6 @@ static int jazz_sonic_probe(struct platform_device *pdev)
SET_NETDEV_DEV(dev, &pdev->dev);
platform_set_drvdata(pdev, dev);
netdev_boot_setup_check(dev);
dev->base_addr = res->start;
dev->irq = platform_get_irq(pdev, 0);
err = sonic_probe1(dev);

1
drivers/net/ethernet/natsemi/xtsonic.c
Просмотреть файл

@ -215,7 +215,6 @@ int xtsonic_probe(struct platform_device *pdev)
lp->device = &pdev->dev;
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
netdev_boot_setup_check(dev);
dev->base_addr = resmem->start;
dev->irq = resirq->start;

1
drivers/net/ethernet/smsc/Kconfig
Просмотреть файл

@ -23,6 +23,7 @@ config SMC9194
tristate "SMC 9194 support"
depends on ISA
select CRC32
select NETDEV_LEGACY_INIT
help
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or

6
drivers/net/ethernet/smsc/smc9194.c
Просмотреть файл

@ -1508,7 +1508,7 @@ MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)");
int __init init_module(void)
static int __init smc_init_module(void)
{
if (io == 0)
printk(KERN_WARNING
@ -1518,13 +1518,15 @@ int __init init_module(void)
devSMC9194 = smc_init(-1);
return PTR_ERR_OR_ZERO(devSMC9194);
}
module_init(smc_init_module);
void __exit cleanup_module(void)
static void __exit smc_cleanup_module(void)
{
unregister_netdev(devSMC9194);
free_irq(devSMC9194->irq, devSMC9194);
release_region(devSMC9194->base_addr, SMC_IO_EXTENT);
free_netdev(devSMC9194);
}
module_exit(smc_cleanup_module);
#endif /* MODULE */

51
drivers/net/wan/Kconfig
Просмотреть файл

@ -290,30 +290,6 @@ config SLIC_DS26522
To compile this driver as a module, choose M here: the
module will be called slic_ds26522.
config DSCC4_PCISYNC
bool "Etinc PCISYNC features"
depends on DSCC4
help
Due to Etinc's design choice for its PCISYNC cards, some operations
are only allowed on specific ports of the DSCC4. This option is the
only way for the driver to know that it shouldn't return a success
code for these operations.
Please say Y if your card is an Etinc's PCISYNC.
config DSCC4_PCI_RST
bool "Hard reset support"
depends on DSCC4
help
Various DSCC4 bugs forbid any reliable software reset of the ASIC.
As a replacement, some vendors provide a way to assert the PCI #RST
pin of DSCC4 through the GPIO port of the card. If you choose Y,
the driver will make use of this feature before module removal
(i.e. rmmod). The feature is known to be available on Commtech's
cards. Contact your manufacturer for details.
Say Y if your card supports this feature.
config IXP4XX_HSS
tristate "Intel IXP4xx HSS (synchronous serial port) support"
depends on HDLC && IXP4XX_NPE && IXP4XX_QMGR
@ -337,33 +313,6 @@ config LAPBETHER
To compile this driver as a module, choose M here: the
module will be called lapbether.
If unsure, say N.
config SBNI
tristate "Granch SBNI12 Leased Line adapter support"
depends on X86
help
Driver for ISA SBNI12-xx cards which are low cost alternatives to
leased line modems.
You can find more information and last versions of drivers and
utilities at <http://www.granch.ru/>. If you have any question you
can send email to <sbni@granch.ru>.
To compile this driver as a module, choose M here: the
module will be called sbni.
If unsure, say N.
config SBNI_MULTILINE
bool "Multiple line feature support"
depends on SBNI
help
Schedule traffic for some parallel lines, via SBNI12 adapters.
If you have two computers connected with two parallel lines it's
possible to increase transfer rate nearly twice. You should have
a program named 'sbniconfig' to configure adapters.
If unsure, say N.

1
drivers/net/wan/Makefile
Просмотреть файл

@ -22,7 +22,6 @@ obj-$(CONFIG_FARSYNC) += farsync.o
obj-$(CONFIG_LANMEDIA) += lmc/
obj-$(CONFIG_LAPBETHER) += lapbether.o
obj-$(CONFIG_SBNI) += sbni.o
obj-$(CONFIG_N2) += n2.o
obj-$(CONFIG_C101) += c101.o
obj-$(CONFIG_WANXL) += wanxl.o

6
drivers/net/wan/hostess_sv11.c
Просмотреть файл

@ -319,16 +319,18 @@ MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11");
static struct z8530_dev *sv11_unit;
int init_module(void)
static int sv11_module_init(void)
{
sv11_unit = sv11_init(io, irq);
if (!sv11_unit)
return -ENODEV;
return 0;
}
module_init(sv11_module_init);
void cleanup_module(void)
static void sv11_module_cleanup(void)
{
if (sv11_unit)
sv11_shutdown(sv11_unit);
}
module_exit(sv11_module_cleanup);

1639
drivers/net/wan/sbni.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

147
drivers/net/wan/sbni.h
Просмотреть файл

@ -1,147 +0,0 @@
/* sbni.h: definitions for a Granch SBNI12 driver, version 5.0.0
* Written 2001 Denis I.Timofeev (timofeev@granch.ru)
* This file is distributed under the GNU GPL
*/
#ifndef SBNI_H
#define SBNI_H
#ifdef SBNI_DEBUG
#define DP( A ) A
#else
#define DP( A )
#endif
/* We don't have official vendor id yet... */
#define SBNI_PCI_VENDOR 0x55
#define SBNI_PCI_DEVICE 0x9f
#define ISA_MODE 0x00
#define PCI_MODE 0x01
#define SBNI_IO_EXTENT 4
enum sbni_reg {
CSR0 = 0,
CSR1 = 1,
DAT = 2
};
/* CSR0 mapping */
enum {
BU_EMP = 0x02,
RC_CHK = 0x04,
CT_ZER = 0x08,
TR_REQ = 0x10,
TR_RDY = 0x20,
EN_INT = 0x40,
RC_RDY = 0x80
};
/* CSR1 mapping */
#define PR_RES 0x80
struct sbni_csr1 {
#ifdef __LITTLE_ENDIAN_BITFIELD
u8 rxl : 5;
u8 rate : 2;
u8 : 1;
#else
u8 : 1;
u8 rate : 2;
u8 rxl : 5;
#endif
};
/* fields in frame header */
#define FRAME_ACK_MASK (unsigned short)0x7000
#define FRAME_LEN_MASK (unsigned short)0x03FF
#define FRAME_FIRST (unsigned short)0x8000
#define FRAME_RETRY (unsigned short)0x0800
#define FRAME_SENT_BAD (unsigned short)0x4000
#define FRAME_SENT_OK (unsigned short)0x3000
/* state flags */
enum {
FL_WAIT_ACK = 0x01,
FL_NEED_RESEND = 0x02,
FL_PREV_OK = 0x04,
FL_SLOW_MODE = 0x08,
FL_SECONDARY = 0x10,
#ifdef CONFIG_SBNI_MULTILINE
FL_SLAVE = 0x20,
#endif
FL_LINE_DOWN = 0x40
};
enum {
DEFAULT_IOBASEADDR = 0x210,
DEFAULT_INTERRUPTNUMBER = 5,
DEFAULT_RATE = 0,
DEFAULT_FRAME_LEN = 1012
};
#define DEF_RXL_DELTA -1
#define DEF_RXL 0xf
#define SBNI_SIG 0x5a
#define SBNI_MIN_LEN 60 /* Shortest Ethernet frame without FCS */
#define SBNI_MAX_FRAME 1023
#define ETHER_MAX_LEN 1518
#define SBNI_TIMEOUT (HZ/10)
#define TR_ERROR_COUNT 32
#define CHANGE_LEVEL_START_TICKS 4
#define SBNI_MAX_NUM_CARDS 16
/* internal SBNI-specific statistics */
struct sbni_in_stats {
u32 all_rx_number;
u32 bad_rx_number;
u32 timeout_number;
u32 all_tx_number;
u32 resend_tx_number;
};
/* SBNI ioctl params */
#define SIOCDEVGETINSTATS SIOCDEVPRIVATE
#define SIOCDEVRESINSTATS SIOCDEVPRIVATE+1
#define SIOCDEVGHWSTATE SIOCDEVPRIVATE+2
#define SIOCDEVSHWSTATE SIOCDEVPRIVATE+3
#define SIOCDEVENSLAVE SIOCDEVPRIVATE+4
#define SIOCDEVEMANSIPATE SIOCDEVPRIVATE+5
/* data packet for SIOCDEVGHWSTATE/SIOCDEVSHWSTATE ioctl requests */
struct sbni_flags {
u32 rxl : 4;
u32 rate : 2;
u32 fixed_rxl : 1;
u32 slow_mode : 1;
u32 mac_addr : 24;
};
/*
* CRC-32 stuff
*/
#define CRC32(c,crc) (crc32tab[((size_t)(crc) ^ (c)) & 0xff] ^ (((crc) >> 8) & 0x00FFFFFF))
/* CRC generator 0xEDB88320 */
/* CRC remainder 0x2144DF1C */
/* CRC initial value 0x00000000 */
#define CRC32_REMAINDER 0x2144DF1C
#define CRC32_INITIAL 0x00000000
#ifndef __initdata
#define __initdata
#endif
#endif

13
include/linux/netdevice.h
Просмотреть файл

@ -295,18 +295,6 @@ enum netdev_state_t {
};
/*
* This structure holds boot-time configured netdevice settings. They
* are then used in the device probing.
*/
struct netdev_boot_setup {
char name[IFNAMSIZ];
struct ifmap map;
};
#define NETDEV_BOOT_SETUP_MAX 8
int __init netdev_boot_setup(char *str);
struct gro_list {
struct list_head list;
int count;
@ -2939,7 +2927,6 @@ static inline struct net_device *first_net_device_rcu(struct net *net)
}
int netdev_boot_setup_check(struct net_device *dev);
unsigned long netdev_boot_base(const char *prefix, int unit);
struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
const char *hwaddr);
struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);

10
include/net/Space.h
Просмотреть файл

@ -8,23 +8,13 @@ struct net_device *ultra_probe(int unit);
struct net_device *wd_probe(int unit);
struct net_device *ne_probe(int unit);
struct net_device *fmv18x_probe(int unit);
struct net_device *i82596_probe(int unit);
struct net_device *ni65_probe(int unit);
struct net_device *sonic_probe(int unit);
struct net_device *smc_init(int unit);
struct net_device *atarilance_probe(int unit);
struct net_device *sun3lance_probe(int unit);
struct net_device *sun3_82586_probe(int unit);
struct net_device *apne_probe(int unit);
struct net_device *cs89x0_probe(int unit);
struct net_device *mvme147lance_probe(int unit);
struct net_device *tc515_probe(int unit);
struct net_device *lance_probe(int unit);
struct net_device *cops_probe(int unit);
struct net_device *ltpc_probe(void);
/* Fibre Channel adapters */
int iph5526_probe(struct net_device *dev);
/* SBNI adapters */
int sbni_probe(int unit);

3
include/net/ax88796.h
Просмотреть файл

@ -38,4 +38,7 @@ struct ax_plat_data {
int (*check_irq)(struct platform_device *pdev);
};
/* exported from ax88796.c for xsurf100.c */
extern void ax_NS8390_reinit(struct net_device *dev);
#endif /* __NET_AX88796_PLAT_H */

6
init/main.c
Просмотреть файл

@ -1221,7 +1221,7 @@ trace_initcall_start_cb(void *data, initcall_t fn)
{
ktime_t *calltime = (ktime_t *)data;
printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current));
printk(KERN_DEBUG "calling %pS @ %i irqs_disabled() %d\n", fn, task_pid_nr(current), irqs_disabled());
*calltime = ktime_get();
}
@ -1235,8 +1235,8 @@ trace_initcall_finish_cb(void *data, initcall_t fn, int ret)
rettime = ktime_get();
delta = ktime_sub(rettime, *calltime);
duration = (unsigned long long) ktime_to_ns(delta) >> 10;
printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n",
fn, ret, duration);
printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs, irqs_disabled() %d\n",
fn, ret, duration, irqs_disabled());
}
static ktime_t initcall_calltime;

125
net/core/dev.c
Просмотреть файл

@ -676,131 +676,6 @@ void dev_remove_offload(struct packet_offload *po)
}
EXPORT_SYMBOL(dev_remove_offload);
/******************************************************************************
*
* Device Boot-time Settings Routines
*
******************************************************************************/
/* Boot time configuration table */
static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
/**
* netdev_boot_setup_add - add new setup entry
* @name: name of the device
* @map: configured settings for the device
*
* Adds new setup entry to the dev_boot_setup list. The function
* returns 0 on error and 1 on success. This is a generic routine to
* all netdevices.
*/
static int netdev_boot_setup_add(char *name, struct ifmap *map)
{
struct netdev_boot_setup *s;
int i;
s = dev_boot_setup;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
memset(s[i].name, 0, sizeof(s[i].name));
strlcpy(s[i].name, name, IFNAMSIZ);
memcpy(&s[i].map, map, sizeof(s[i].map));
break;
}
}
return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
}
/**
* netdev_boot_setup_check - check boot time settings
* @dev: the netdevice
*
* Check boot time settings for the device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found, 1 if they are.
*/
int netdev_boot_setup_check(struct net_device *dev)
{
struct netdev_boot_setup *s = dev_boot_setup;
int i;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
!strcmp(dev->name, s[i].name)) {
dev->irq = s[i].map.irq;
dev->base_addr = s[i].map.base_addr;
dev->mem_start = s[i].map.mem_start;
dev->mem_end = s[i].map.mem_end;
return 1;
}
}
return 0;
}
EXPORT_SYMBOL(netdev_boot_setup_check);
/**
* netdev_boot_base - get address from boot time settings
* @prefix: prefix for network device
* @unit: id for network device
*
* Check boot time settings for the base address of device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found.
*/
unsigned long netdev_boot_base(const char *prefix, int unit)
{
const struct netdev_boot_setup *s = dev_boot_setup;
char name[IFNAMSIZ];
int i;
sprintf(name, "%s%d", prefix, unit);
/*
* If device already registered then return base of 1
* to indicate not to probe for this interface
*/
if (__dev_get_by_name(&init_net, name))
return 1;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
if (!strcmp(name, s[i].name))
return s[i].map.base_addr;
return 0;
}
/*
* Saves at boot time configured settings for any netdevice.
*/
int __init netdev_boot_setup(char *str)
{
int ints[5];
struct ifmap map;
str = get_options(str, ARRAY_SIZE(ints), ints);
if (!str || !*str)
return 0;
/* Save settings */
memset(&map, 0, sizeof(map));
if (ints[0] > 0)
map.irq = ints[1];
if (ints[0] > 1)
map.base_addr = ints[2];
if (ints[0] > 2)
map.mem_start = ints[3];
if (ints[0] > 3)
map.mem_end = ints[4];
/* Add new entry to the list */
return netdev_boot_setup_add(str, &map);
}
__setup("netdev=", netdev_boot_setup);
/*******************************************************************************
*
* Device Interface Subroutines

2
net/ethernet/eth.c
Просмотреть файл

@ -62,8 +62,6 @@
#include <linux/uaccess.h>
#include <net/pkt_sched.h>
__setup("ether=", netdev_boot_setup);
/**
* eth_header - create the Ethernet header
* @skb: buffer to alter