backlight: ams369fg06: remove redundant variable 'before_power'

'before_power' was used to check the previous status when resume() is
called.  However, FB_BLANK_POWERDOWN was used in suspend() all the time,
so there is no need to check the previous status.  Also, redundant return
variables are removed to reduce the code.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/ams369fg06.c

@@ -545,44 +545,26 @@ static int ams369fg06_remove(struct spi_device *spi)
 }
 
 #if defined(CONFIG_PM)
-static unsigned int before_power;
-
 static int ams369fg06_suspend(struct spi_device *spi, pm_message_t mesg)
 {
-	int ret = 0;
 	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
 
 	dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
 
-	before_power = lcd->power;
-
 	/*
 	 * when lcd panel is suspend, lcd panel becomes off
 	 * regardless of status.
 	 */
-	ret = ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
-
-	return ret;
+	return ams369fg06_power(lcd, FB_BLANK_POWERDOWN);
 }
 
 static int ams369fg06_resume(struct spi_device *spi)
 {
-	int ret = 0;
 	struct ams369fg06 *lcd = dev_get_drvdata(&spi->dev);
 
-	/*
-	 * after suspended, if lcd panel status is FB_BLANK_UNBLANK
-	 * (at that time, before_power is FB_BLANK_UNBLANK) then
-	 * it changes that status to FB_BLANK_POWERDOWN to get lcd on.
-	 */
-	if (before_power == FB_BLANK_UNBLANK)
-		lcd->power = FB_BLANK_POWERDOWN;
+	lcd->power = FB_BLANK_POWERDOWN;
 
-	dev_dbg(&spi->dev, "before_power = %d\n", before_power);
-
-	ret = ams369fg06_power(lcd, before_power);
-
-	return ret;
+	return ams369fg06_power(lcd, FB_BLANK_UNBLANK);
 }
 #else
 #define ams369fg06_suspend	NULL