powerpc/64: Replace CURRENT_THREAD_INFO with PACA_THREAD_INFO

Now that current_thread_info is located at the beginning of 'current'
task struct, CURRENT_THREAD_INFO macro is not really needed any more.

This patch replaces it by loads of the value at PACA_THREAD_INFO(r13).

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Add PACA_THREAD_INFO rather than using PACACURRENT]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/exception-64s.h

@@ -671,7 +671,7 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 
 #define RUNLATCH_ON				\
 BEGIN_FTR_SECTION				\
-	CURRENT_THREAD_INFO(r3, r1);		\
+	ld	r3, PACA_THREAD_INFO(r13);	\
 	ld	r4,TI_LOCAL_FLAGS(r3);		\
 	andi.	r0,r4,_TLF_RUNLATCH;		\
 	beql	ppc64_runlatch_on_trampoline;	\
@@ -721,7 +721,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
 #ifdef CONFIG_PPC_970_NAP
 #define FINISH_NAP				\
 BEGIN_FTR_SECTION				\
-	CURRENT_THREAD_INFO(r11, r1);		\
+	ld	r11, PACA_THREAD_INFO(r13);	\
 	ld	r9,TI_LOCAL_FLAGS(r11);		\
 	andi.	r10,r9,_TLF_NAPPING;		\
 	bnel	power4_fixup_nap;		\

arch/powerpc/include/asm/thread_info.h

@@ -17,10 +17,6 @@
 
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 
-#ifdef CONFIG_PPC64
-#define CURRENT_THREAD_INFO(dest, sp)	stringify_in_c(ld dest, PACACURRENT(r13))
-#endif
-
 #ifndef __ASSEMBLY__
 #include <linux/cache.h>
 #include <asm/processor.h>

arch/powerpc/kernel/asm-offsets.c

@@ -182,6 +182,8 @@ int main(void)
 	OFFSET(PACAPROCSTART, paca_struct, cpu_start);
 	OFFSET(PACAKSAVE, paca_struct, kstack);
 	OFFSET(PACACURRENT, paca_struct, __current);
+	DEFINE(PACA_THREAD_INFO, offsetof(struct paca_struct, __current) +
+				 offsetof(struct task_struct, thread_info));
 	OFFSET(PACASAVEDMSR, paca_struct, saved_msr);
 	OFFSET(PACAR1, paca_struct, saved_r1);
 	OFFSET(PACATOC, paca_struct, kernel_toc);

arch/powerpc/kernel/entry_64.S

@@ -166,7 +166,7 @@ system_call:			/* label this so stack traces look sane */
 	li	r10,IRQS_ENABLED
 	std	r10,SOFTE(r1)
 
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACA_THREAD_INFO(r13)
 	ld	r10,TI_FLAGS(r11)
 	andi.	r11,r10,_TIF_SYSCALL_DOTRACE
 	bne	.Lsyscall_dotrace		/* does not return */
@@ -213,7 +213,7 @@ system_call:			/* label this so stack traces look sane */
 	ld	r3,RESULT(r1)
 #endif
 
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_THREAD_INFO(r13)
 
 	ld	r8,_MSR(r1)
 #ifdef CONFIG_PPC_BOOK3S
@@ -346,7 +346,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
 	/* Repopulate r9 and r10 for the syscall path */
 	addi	r9,r1,STACK_FRAME_OVERHEAD
-	CURRENT_THREAD_INFO(r10, r1)
+	ld	r10, PACA_THREAD_INFO(r13)
 	ld	r10,TI_FLAGS(r10)
 
 	cmpldi	r0,NR_syscalls
@@ -740,7 +740,7 @@ _GLOBAL(ret_from_except_lite)
 	mtmsrd	r10,1		  /* Update machine state */
 #endif /* CONFIG_PPC_BOOK3E */
 
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_THREAD_INFO(r13)
 	ld	r3,_MSR(r1)
 #ifdef CONFIG_PPC_BOOK3E
 	ld	r10,PACACURRENT(r13)
@@ -854,7 +854,7 @@ resume_kernel:
 1:	bl	preempt_schedule_irq
 
 	/* Re-test flags and eventually loop */
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_THREAD_INFO(r13)
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b

arch/powerpc/kernel/exceptions-64e.S

@@ -493,7 +493,7 @@ exc_##n##_bad_stack:							    \
  * interrupts happen before the wait instruction.
  */
 #define CHECK_NAPPING()							\
-	CURRENT_THREAD_INFO(r11, r1);					\
+	ld	r11, PACA_THREAD_INFO(r13);				\
 	ld	r10,TI_LOCAL_FLAGS(r11);				\
 	andi.	r9,r10,_TLF_NAPPING;					\
 	beq+	1f;							\

arch/powerpc/kernel/exceptions-64s.S

@@ -1629,7 +1629,7 @@ do_hash_page:
 	ori	r0,r0,DSISR_BAD_FAULT_64S@l
 	and.	r0,r4,r0		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACA_THREAD_INFO(r13)
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
 	bne	77f			/* then don't call hash_page now */

arch/powerpc/kernel/idle_book3e.S

@@ -63,7 +63,7 @@ _GLOBAL(\name)
 1:	/* Let's set the _TLF_NAPPING flag so interrupts make us return
 	 * to the right spot
 	*/
-	CURRENT_THREAD_INFO(r11, r1)
+	ld	r11, PACACURRENT(r13)
 	ld	r10,TI_LOCAL_FLAGS(r11)
 	ori	r10,r10,_TLF_NAPPING
 	std	r10,TI_LOCAL_FLAGS(r11)

arch/powerpc/kernel/idle_power4.S

@@ -68,7 +68,7 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-	CURRENT_THREAD_INFO(r9, r1)
+	ld	r9, PACA_THREAD_INFO(r13)
 	ld	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
 	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
 	std	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */

arch/powerpc/kernel/trace/ftrace_64_mprofile.S

@@ -229,7 +229,7 @@ ftrace_call:
 	 *  - r0, r11 & r12 are free
 	 */
 livepatch_handler:
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_THREAD_INFO(r13)
 
 	/* Allocate 3 x 8 bytes */
 	ld	r11, TI_livepatch_sp(r12)
@@ -256,7 +256,7 @@ livepatch_handler:
 	 * restore it.
 	 */
 
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_THREAD_INFO(r13)
 
 	ld	r11, TI_livepatch_sp(r12)
 
@@ -273,7 +273,7 @@ livepatch_handler:
 	ld	r2,  -24(r11)
 
 	/* Pop livepatch stack frame */
-	CURRENT_THREAD_INFO(r12, r1)
+	ld	r12, PACA_THREAD_INFO(r13)
 	subi	r11, r11, 24
 	std	r11, TI_livepatch_sp(r12)