microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: SoC: late DT updates for v4.9 

These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
   automotive SoC similar to the ⅹ8a7795 chip we already support, but
   the dts changes rely on a clock driver change that has been
   merged for v4.9 through the clk tree.
 
 - The Amlogic meson-gxbb (S905) platform gains support for a few
   drivers merged through our tree, in particular the network and
   usb driver changes are required and included here, and also
   the clk tree changes.
 
 - The Allwinner platforms have seen a large-scale change to their
   clk drivers and the dts file updates must come after that.
   This includes the newly added Nextthing GR8 platform, which is
   derived from sun5i/A13.
 
 - Some integrator (arm32) changes rely on clk driver changes.
 
 - A single patch for lpc32xx has no such dependency but wasn't
   added until just before the merge window
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/gzeGCrR//JCVInAQKVhw/5AS5R2S7m7VTlWMvGjvH9ITudYhiAGJP1
 z5nP5SwJsfmSjfvw0kSxGUmsNS3rHutsPMz65EesKqFuC3LPZiqMUqrzxt9iqqJx
 I+XdAxDTnOE1RBZFtB9dL+qLzHQ87pMo6R9dfs32sxb3QuCQBYhcFyLmQDuZuHH0
 yeDi3ARFvgxx/qoRUA7cnSlY5RLNzM44y+Ik/ZcVr4ReqYBC2g5mGi5htoiNSLWR
 nwWR+5hNLAp44OZgkZfNsf6kB9brWDQh3PbnBjy6sKXSBoSVIfxTweh2DMJXbZ7l
 1Ck+S7WyLMhGJp448TcuBykr/l9i3uqNh061XavjwP8CAjAdZ787XlnNSztc2pyh
 dvbI/E76pLGb5ZoFdqlY2Syl63ZFN4K8mjZMSPYfYKf85EDIxe4MYwpbo7/pwzh3
 8OlBwH6r4aUMw+QgE1nx8nsjaCoGDMFdgJeJJaWdriZ6Nst2n5gREk/mzbrAWkNG
 ujChn/6hES9LuE21aCp1ipB7qnnyeRinfqz2acEFxMQxuPdjwKrdJqNsBaTWsapE
 Z+b/BFP+LTdPfHCmMSVwfMrNbwsoY7+L4EXXL36lUgOwcDp0vCXA+PiiahYASewA
 1LDQ3CURCEapdBhVU+06Kb4y5eWU7M7EqpOwpHgRJ92dVxgNxuCfcurvxzqPP1UP
 3O4R7bfUTTg=
 =OmAu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

   - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
     automotive SoC similar to the ⅹ8a7795 chip we already support, but
     the dts changes rely on a clock driver change that has been merged
     for v4.9 through the clk tree.

   - The Amlogic meson-gxbb (S905) platform gains support for a few
     drivers merged through our tree, in particular the network and usb
     driver changes are required and included here, and also the clk
     tree changes.

   - The Allwinner platforms have seen a large-scale change to their clk
     drivers and the dts file updates must come after that. This
     includes the newly added Nextthing GR8 platform, which is derived
     from sun5i/A13.

   - Some integrator (arm32) changes rely on clk driver changes.

   - A single patch for lpc32xx has no such dependency but wasn't added
     until just before the merge window"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  ARM: dts: lpc32xx: add device node for IRAM on-chip memory
  ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
  ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
  ARM: dts: sun8i: add pinmux for UART1 at PG
  dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
  dts: sun8i-h3: add pinmux definitions for I2C0-2
  dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
  dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
  dts: sun8i-h3: add pinmux definitions for UART2-3
  ARM: dts: sun9i: a80-optimus: Disable EHCI1
  ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
  ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
  ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
  ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
  ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
  ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
  ...
This commit is contained in:
Linus Torvalds 2016-10-07 21:34:49 -07:00
Родитель a439f8f287 8185041f5f
Коммит c913fc4146
51 изменённых файлов: 4157 добавлений и 874 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/devicetree/bindings/arm/shmobile.txt
Просмотреть файл

@ -49,6 +49,8 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
- Koelsch (RTP0RC7791SEB00010S)

15
Documentation/devicetree/bindings/firmware/meson/meson_sm.txt Normal file
Просмотреть файл

@ -0,0 +1,15 @@
* Amlogic Secure Monitor
In the Amlogic SoCs the Secure Monitor code is used to provide access to the
NVMEM, enable JTAG, set USB boot, etc...
Required properties for the secure monitor node:
- compatible: Should be "amlogic,meson-gxbb-sm"
Example:
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};

5
Documentation/devicetree/bindings/media/meson-ir.txt
Просмотреть файл

@ -1,7 +1,10 @@
* Amlogic Meson IR remote control receiver
Required properties:
- compatible : should be "amlogic,meson6-ir"
- compatible : depending on the platform this should be one of:
- "amlogic,meson6-ir"
- "amlogic,meson8b-ir"
- "amlogic,meson-gxbb-ir"
- reg : physical base address and length of the device registers
- interrupts : a single specifier for the interrupt from the device

45
Documentation/devicetree/bindings/net/meson-dwmac.txt
Просмотреть файл

@ -1,18 +1,32 @@
* Amlogic Meson DWMAC Ethernet controller
The device inherits all the properties of the dwmac/stmmac devices
described in the file net/stmmac.txt with the following changes.
described in the file stmmac.txt in the current directory with the
following changes.
Required properties:
Required properties on all platforms:
- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac"
and any applicable more detailed version number
described in net/stmmac.txt
- compatible: Depending on the platform this should be one of:
- "amlogic,meson6-dwmac"
- "amlogic,meson8b-dwmac"
- "amlogic,meson-gxbb-dwmac"
Additionally "snps,dwmac" and any applicable more
detailed version number described in net/stmmac.txt
should be used.
- reg: should contain a register range for the dwmac controller and
another one for the Amlogic specific configuration
- reg: The first register range should be the one of the DWMAC
controller. The second range is is for the Amlogic specific
configuration (for example the PRG_ETHERNET register range
on Meson8b and newer)
Example:
Required properties on Meson8b and newer:
- clock-names: Should contain the following:
- "stmmaceth" - see stmmac.txt
- "clkin0" - first parent clock of the internal mux
- "clkin1" - second parent clock of the internal mux
Example for Meson6:
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
@ -23,3 +37,18 @@ Example:
clocks = <&clk81>;
clock-names = "stmmaceth";
}
Example for GXBB:
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000>,
<0x0 0xc8834540 0x0 0x8>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
status = "disabled";
};

39
Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt Normal file
Просмотреть файл

@ -0,0 +1,39 @@
= Amlogic eFuse device tree bindings =
Required properties:
- compatible: should be "amlogic,meson-gxbb-efuse"
= Data cells =
Are child nodes of eFuse, bindings of which as described in
bindings/nvmem/nvmem.txt
Example:
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
= Data consumers =
Are device nodes which consume nvmem data cells.
For example:
eth_mac {
...
nvmem-cells = <&eth_mac>;
nvmem-cell-names = "eth_mac";
};

27
Documentation/devicetree/bindings/phy/meson-usb2-phy.txt Normal file
Просмотреть файл

@ -0,0 +1,27 @@
* Amlogic USB2 PHY
Required properties:
- compatible: Depending on the platform this should be one of:
"amlogic,meson8b-usb2-phy"
"amlogic,meson-gxbb-usb2-phy"
- reg: The base address and length of the registers
- #phys-cells: should be 0 (see phy-bindings.txt in this directory)
- clocks: phandle and clock identifier for the phy clocks
- clock-names: "usb_general" and "usb"
Optional properties:
- resets: reference to the reset controller
- phy-supply: see phy-bindings.txt in this directory
Example:
usb0_phy: usb_phy@0 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0x0 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
phy-supply = <&usb_vbus>;
};

2
Documentation/devicetree/bindings/usb/dwc2.txt
Просмотреть файл

@ -10,6 +10,8 @@ Required properties:
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt

1
arch/arm/boot/dts/Makefile
Просмотреть файл

@ -745,6 +745,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-pcduino2.dtb \
sun4i-a10-pov-protab2-ips9.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
ntc-gr8-evb.dtb \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \

51
arch/arm/boot/dts/integratorap.dts
Просмотреть файл

@ -19,7 +19,7 @@
bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
};
/* 24 MHz chrystal on the core module */
/* 24 MHz chrystal on the Integrator/AP development board */
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -39,6 +39,34 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <14745600>;
clocks = <&xtal24mhz>;
};
core-module@10000000 {
/* 24 MHz chrystal on the core module */
cm24mhz: cm24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
/* Oscillator on the core module, clocks the CPU core */
cmosc: cmosc@24M {
compatible = "arm,syscon-icst525-integratorap-cm";
#clock-cells = <0>;
lock-offset = <0x14>;
vco-offset = <0x08>;
clocks = <&cm24mhz>;
};
/* Auxilary oscillator on the core module, 32.369MHz at boot */
auxosc: auxosc@24M {
compatible = "arm,syscon-icst525";
#clock-cells = <0>;
lock-offset = <0x14>;
vco-offset = <0x1c>;
clocks = <&cm24mhz>;
};
};
syscon {
@ -47,6 +75,27 @@
interrupt-parent = <&pic>;
/* These are the logical module IRQs */
interrupts = <9>, <10>, <11>, <12>;
/*
* SYSCLK clocks PCIv3 bridge, system controller and the
* logic modules.
*/
sysclk: apsys@24M {
compatible = "arm,syscon-icst525-integratorap-sys";
#clock-cells = <0>;
lock-offset = <0x1c>;
vco-offset = <0x04>;
clocks = <&xtal24mhz>;
};
/* One-bit control for the PCI bus clock (33 or 25 MHz) */
pciclk: pciclk@24M {
compatible = "arm,syscon-icst525-integratorap-pci";
#clock-cells = <0>;
lock-offset = <0x1c>;
vco-offset = <0x04>;
clocks = <&xtal24mhz>;
};
};
timer0: timer@13000000 {

74
arch/arm/boot/dts/integratorcp.dts
Просмотреть файл

@ -58,20 +58,37 @@
core-module@10000000 {
/* 24 MHz chrystal on the core module */
xtal24mhz: xtal24mhz@24M {
cm24mhz: cm24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
/*
* External oscillator on the core module, usually used
* to drive video circuitry. Driven from the 24MHz clock.
*/
auxosc: cm_aux_osc@25M {
/* Oscillator on the core module, clocks the CPU core */
cmcore: cmosc@24M {
compatible = "arm,syscon-icst525-integratorcp-cm-core";
#clock-cells = <0>;
compatible = "arm,integrator-cm-auxosc";
clocks = <&xtal24mhz>;
lock-offset = <0x14>;
vco-offset = <0x08>;
clocks = <&cm24mhz>;
};
/* Oscillator on the core module, clocks the memory bus */
cmmem: cmosc@24M {
compatible = "arm,syscon-icst525-integratorcp-cm-mem";
#clock-cells = <0>;
lock-offset = <0x14>;
vco-offset = <0x08>;
clocks = <&cm24mhz>;
};
/* Auxilary oscillator on the core module, clocks the CLCD */
auxosc: auxosc@24M {
compatible = "arm,syscon-icst525";
#clock-cells = <0>;
lock-offset = <0x14>;
vco-offset = <0x1c>;
clocks = <&cm24mhz>;
};
/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
@ -80,7 +97,7 @@
compatible = "fixed-factor-clock";
clock-div = <3>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
clocks = <&cm24mhz>;
};
/* The timer clock is the 24 MHz oscillator divided to 1MHz */
@ -89,7 +106,7 @@
compatible = "fixed-factor-clock";
clock-div = <24>;
clock-mult = <1>;
clocks = <&xtal24mhz>;
clocks = <&cm24mhz>;
};
};
@ -209,7 +226,42 @@
reg = <0xC0000000 0x1000>;
interrupts = <22>;
clocks = <&auxosc>, <&pclk>;
clock-names = "clcd", "apb_pclk";
clock-names = "clcdclk", "apb_pclk";
port {
/*
* The VGA connected is implemented with a
* THS8134A triple DAC that can be run in 24bit
* or 16bit RGB mode.
*/
clcd_pads: endpoint {
remote-endpoint = <&clcd_panel>;
arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
};
};
panel {
compatible = "panel-dpi";
port {
clcd_panel: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
/* Standard 640x480 VGA timings */
panel-timing {
clock-frequency = <25175000>;
hactive = <640>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vactive = <480>;
vback-porch = <33>;
vfront-porch = <10>;
vsync-len = <2>;
};
};
};
};
};

12
arch/arm/boot/dts/lpc32xx.dtsi
Просмотреть файл

@ -51,9 +51,19 @@
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x20000000 0x20000000 0x30000000>,
ranges = <0x00000000 0x00000000 0x10000000>,
<0x20000000 0x20000000 0x30000000>,
<0xe0000000 0xe0000000 0x04000000>;
iram: sram@08000000 {
compatible = "mmio-sram";
reg = <0x08000000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x08000000 0x20000>;
};
/*
* Enable either SLC or MLC
*/

342
arch/arm/boot/dts/ntc-gr8-evb.dts Normal file
Просмотреть файл

@ -0,0 +1,342 @@
/*
* Copyright 2016 Free Electrons
* Copyright 2016 NextThing Co
*
* Mylène Josserand <mylene.josserand@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "ntc-gr8.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "NextThing GR8-EVB";
compatible = "nextthing,gr8-evb", "nextthing,gr8";
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 10000 0>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
};
};
&be0 {
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
/*
* The interrupt is routed through the "External Fast
* Interrupt Request" pin (ball G13 of the module)
* directly to the main interrupt controller, without
* any other controller interfering.
*/
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
wm8978: codec@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8978";
reg = <0x1a>;
};
pcf8563: rtc@51 {
compatible = "phg,pcf8563";
reg = <0x51>;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&i2s0 {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button@190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
button@390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
button@600 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <600000>;
};
button@800 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <800000>;
};
button@980 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <980000>;
};
button@1180 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1180000>;
};
button@1400 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <1400000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gr8_evb>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
/* MLC Support sucks for now */
status = "disabled";
};
&ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
mmc0_cd_pin_gr8_evb: mmc0-cd-pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_id_pin_gr8_evb: usb0-id-pin@0 {
allwinner,pins = "PG2";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb0_vbus_det_pin_gr8_evb: usb0-vbus-det-pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_gr8_evb: usb1-vbus-pin@0 {
allwinner,pins = "PG13";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins_a>;
status = "okay";
};
&reg_dcdc2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
regulator-always-on;
};
&reg_dcdc3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-sys";
regulator-always-on;
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
regulator-always-on;
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_gr8_evb>;
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&rtp {
allwinner,ts-attached;
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>;
status = "okay";
};
&tve0 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>;
status = "okay";
};
&usb_otg {
/*
* The GR8-EVB has a somewhat interesting design. There's a
* pin supposed to control VBUS, an ID pin, a VBUS detect pin,
* so everything should work just fine.
*
* Except that the pin supposed to control VBUS is not
* connected to any controllable output, neither to the SoC
* through a GPIO or to the PMIC, and it is pulled down,
* meaning that we will never be able to enable VBUS on this
* board.
*/
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_pin_gr8_evb>, <&usb0_vbus_det_pin_gr8_evb>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

1087
arch/arm/boot/dts/ntc-gr8.dtsi Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

424
arch/arm/boot/dts/sun6i-a31.dtsi
Просмотреть файл

@ -47,7 +47,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
/ {
interrupt-parent = <&gic>;
@ -65,7 +67,10 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll6 0>;
clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>,
<&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>,
<&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>;
status = "disabled";
};
@ -73,7 +78,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&pll6 0>;
clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>,
<&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>;
status = "disabled";
};
};
@ -97,7 +104,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
clocks = <&cpu>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
@ -192,235 +199,6 @@
clock-output-names = "osc32k";
};
pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
};
pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6", "pll6x2";
};
cpu: cpu@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20050 0x4>;
/*
* PLL1 is listed twice here.
* While it looks suspicious, it's actually documented
* that way both in the datasheet and in the code from
* Allwinner.
*/
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
clock-output-names = "cpu";
};
axi: axi@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-axi-clk";
reg = <0x01c20050 0x4>;
clocks = <&cpu>;
clock-output-names = "axi";
};
ahb1: ahb1@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
/*
* Clock AHB1 from PLL6, instead of CPU/AXI which
* has rate changes due to cpufreq. Also the DMA
* controller requires AHB1 clocked from PLL6.
*/
assigned-clocks = <&ahb1>;
assigned-clock-parents = <&pll6 0>;
};
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <5>,
<6>, <8>, <9>,
<10>, <11>, <12>,
<13>, <14>,
<17>, <18>, <19>,
<20>, <21>, <22>,
<23>, <24>, <26>,
<27>, <29>,
<30>, <31>, <32>,
<36>, <37>, <40>,
<43>, <44>, <45>,
<46>, <47>, <50>,
<52>, <55>, <56>,
<57>, <58>;
clock-output-names = "ahb1_mipidsi", "ahb1_ss",
"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
"ahb1_nand0", "ahb1_sdram",
"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
"ahb1_ehci1", "ahb1_ohci0",
"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
"ahb1_drc0", "ahb1_drc1";
};
apb1: apb1@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1>;
clock-output-names = "apb1";
};
apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb1-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <4>,
<5>, <12>,
<13>;
clock-output-names = "apb1_codec", "apb1_digital_mic",
"apb1_pio", "apb1_daudio0",
"apb1_daudio1";
};
apb2: clk@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
clock-output-names = "apb2";
};
apb2_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-indices = <0>, <1>,
<2>, <3>, <16>,
<17>, <18>, <19>,
<20>, <21>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
"apb2_i2c2", "apb2_i2c3",
"apb2_uart0", "apb2_uart1",
"apb2_uart2", "apb2_uart3",
"apb2_uart4", "apb2_uart5";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
};
mmc1_clk: clk@01c2008c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
};
mmc2_clk: clk@01c20090 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
};
mmc3_clk: clk@01c20094 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20094 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc3",
"mmc3_output",
"mmc3_sample";
};
ss_clk: clk@01c2009c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "ss";
};
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi0";
};
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi1";
};
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi2";
};
spi3_clk: clk@01c200ac {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi3";
};
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
clock-indices = <8>, <9>, <10>,
<16>, <17>,
<18>;
clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
"usb_ohci0", "usb_ohci1",
"usb_ohci2";
};
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
@ -463,23 +241,23 @@
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
clocks = <&ccu CLK_AHB1_DMA>;
resets = <&ccu RST_AHB1_DMA>;
#dma-cells = <1>;
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ahb1_gates 8>,
<&mmc0_clk 0>,
<&mmc0_clk 1>,
<&mmc0_clk 2>;
clocks = <&ccu CLK_AHB1_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 8>;
resets = <&ccu RST_AHB1_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -490,15 +268,15 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ahb1_gates 9>,
<&mmc1_clk 0>,
<&mmc1_clk 1>,
<&mmc1_clk 2>;
clocks = <&ccu CLK_AHB1_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 9>;
resets = <&ccu RST_AHB1_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -509,15 +287,15 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ahb1_gates 10>,
<&mmc2_clk 0>,
<&mmc2_clk 1>,
<&mmc2_clk 2>;
clocks = <&ccu CLK_AHB1_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 10>;
resets = <&ccu RST_AHB1_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -528,15 +306,15 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ahb1_gates 11>,
<&mmc3_clk 0>,
<&mmc3_clk 1>,
<&mmc3_clk 2>;
clocks = <&ccu CLK_AHB1_MMC3>,
<&ccu CLK_MMC3>,
<&ccu CLK_MMC3_OUTPUT>,
<&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 11>;
resets = <&ccu RST_AHB1_MMC3>;
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -547,8 +325,8 @@
usb_otg: usb@01c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ahb1_gates 24>;
resets = <&ahb1_rst 24>;
clocks = <&ccu CLK_AHB1_OTG>;
resets = <&ccu RST_AHB1_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
@ -565,15 +343,15 @@
reg-names = "phy_ctrl",
"pmu1",
"pmu2";
clocks = <&usb_clk 8>,
<&usb_clk 9>,
<&usb_clk 10>;
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>,
<&ccu CLK_USB_PHY2>;
clock-names = "usb0_phy",
"usb1_phy",
"usb2_phy";
resets = <&usb_clk 0>,
<&usb_clk 1>,
<&usb_clk 2>;
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>;
reset-names = "usb0_reset",
"usb1_reset",
"usb2_reset";
@ -585,8 +363,8 @@
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 26>;
resets = <&ahb1_rst 26>;
clocks = <&ccu CLK_AHB1_EHCI0>;
resets = <&ccu RST_AHB1_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@ -596,8 +374,8 @@
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 29>, <&usb_clk 16>;
resets = <&ahb1_rst 29>;
clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
resets = <&ccu RST_AHB1_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@ -607,8 +385,8 @@
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 27>;
resets = <&ahb1_rst 27>;
clocks = <&ccu CLK_AHB1_EHCI1>;
resets = <&ccu RST_AHB1_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@ -618,8 +396,8 @@
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 30>, <&usb_clk 17>;
resets = <&ahb1_rst 30>;
clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
resets = <&ccu RST_AHB1_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
@ -629,11 +407,20 @@
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 31>, <&usb_clk 18>;
resets = <&ahb1_rst 31>;
clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>;
resets = <&ccu RST_AHB1_OHCI2>;
status = "disabled";
};
ccu: clock@01c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
@ -641,7 +428,7 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 5>;
clocks = <&ccu CLK_APB1_PIO>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
@ -762,24 +549,6 @@
};
};
ahb1_rst: reset@01c202c0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-ahb1-reset";
reg = <0x01c202c0 0xc>;
};
apb1_rst: reset@01c202d0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d0 0x4>;
};
apb2_rst: reset@01c202d8 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d8 0x4>;
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
@ -816,8 +585,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
resets = <&apb2_rst 16>;
clocks = <&ccu CLK_APB2_UART0>;
resets = <&ccu RST_APB2_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
@ -829,8 +598,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
resets = <&apb2_rst 17>;
clocks = <&ccu CLK_APB2_UART1>;
resets = <&ccu RST_APB2_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
@ -842,8 +611,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
resets = <&apb2_rst 18>;
clocks = <&ccu CLK_APB2_UART2>;
resets = <&ccu RST_APB2_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
@ -855,8 +624,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
resets = <&apb2_rst 19>;
clocks = <&ccu CLK_APB2_UART3>;
resets = <&ccu RST_APB2_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
@ -868,8 +637,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
resets = <&apb2_rst 20>;
clocks = <&ccu CLK_APB2_UART4>;
resets = <&ccu RST_APB2_UART4>;
dmas = <&dma 10>, <&dma 10>;
dma-names = "rx", "tx";
status = "disabled";
@ -881,8 +650,8 @@
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
resets = <&apb2_rst 21>;
clocks = <&ccu CLK_APB2_UART5>;
resets = <&ccu RST_APB2_UART5>;
dmas = <&dma 22>, <&dma 22>;
dma-names = "rx", "tx";
status = "disabled";
@ -892,8 +661,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
clocks = <&ccu CLK_APB2_I2C0>;
resets = <&ccu RST_APB2_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -903,8 +672,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
clocks = <&ccu CLK_APB2_I2C1>;
resets = <&ccu RST_APB2_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -914,8 +683,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
clocks = <&ccu CLK_APB2_I2C2>;
resets = <&ccu RST_APB2_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -925,8 +694,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 3>;
resets = <&apb2_rst 3>;
clocks = <&ccu CLK_APB2_I2C3>;
resets = <&ccu RST_APB2_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -937,9 +706,9 @@
reg = <0x01c30000 0x1054>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
resets = <&ahb1_rst 17>;
resets = <&ccu RST_AHB1_EMAC>;
reset-names = "stmmaceth";
snps,pbl = <2>;
snps,fixed-burst;
@ -953,9 +722,9 @@
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 5>, <&ss_clk>;
clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 5>;
resets = <&ccu RST_AHB1_SS>;
reset-names = "ahb";
};
@ -967,19 +736,19 @@
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 19>;
resets = <&ahb1_rst 19>;
clocks = <&ccu CLK_AHB1_HSTIMER>;
resets = <&ccu RST_AHB1_HSTIMER>;
};
spi0: spi@01c68000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 20>, <&spi0_clk>;
clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
resets = <&ahb1_rst 20>;
resets = <&ccu RST_AHB1_SPI0>;
status = "disabled";
};
@ -987,11 +756,11 @@
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
dma-names = "rx", "tx";
resets = <&ahb1_rst 21>;
resets = <&ccu RST_AHB1_SPI1>;
status = "disabled";
};
@ -999,11 +768,11 @@
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 22>, <&spi2_clk>;
clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma 25>, <&dma 25>;
dma-names = "rx", "tx";
resets = <&ahb1_rst 22>;
resets = <&ccu RST_AHB1_SPI2>;
status = "disabled";
};
@ -1011,11 +780,11 @@
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6b000 0x1000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 23>, <&spi3_clk>;
clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma 26>, <&dma 26>;
dma-names = "rx", "tx";
resets = <&ahb1_rst 23>;
resets = <&ccu RST_AHB1_SPI3>;
status = "disabled";
};
@ -1052,8 +821,9 @@
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
<&pll6 0>;
clocks = <&osc32k>, <&osc24M>,
<&ccu CLK_PLL_PERIPH>,
<&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
};

305
arch/arm/boot/dts/sun8i-a23-a33.dtsi
Просмотреть файл

@ -46,7 +46,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
/ {
interrupt-parent = <&gic>;
@ -60,7 +62,9 @@
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&pll6 0>;
clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
<&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
status = "disabled";
};
};
@ -111,151 +115,6 @@
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
pll1: clk@01c20000 {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
};
/* dummy clock until actually implemented */
pll5: pll5_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
clock-output-names = "pll5";
};
pll6: clk@01c20028 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6", "pll6x2";
};
cpu: cpu_clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20050 0x4>;
/*
* PLL1 is listed twice here.
* While it looks suspicious, it's actually documented
* that way both in the datasheet and in the code from
* Allwinner.
*/
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
clock-output-names = "cpu";
};
axi: axi_clk@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-axi-clk";
reg = <0x01c20050 0x4>;
clocks = <&cpu>;
clock-output-names = "axi";
};
ahb1: ahb1_clk@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
};
apb1: apb1_clk@01c20054 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb1>;
clock-output-names = "apb1";
};
apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb1>;
clock-indices = <0>, <5>,
<12>, <13>;
clock-output-names = "apb1_codec", "apb1_pio",
"apb1_daudio0", "apb1_daudio1";
};
apb2: clk@01c20058 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
clock-output-names = "apb2";
};
apb2_gates: clk@01c2006c {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
clock-indices = <0>, <1>,
<2>, <16>,
<17>, <18>,
<19>, <20>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
"apb2_i2c2", "apb2_uart0",
"apb2_uart1", "apb2_uart2",
"apb2_uart3", "apb2_uart4";
};
mmc0_clk: clk@01c20088 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc0",
"mmc0_output",
"mmc0_sample";
};
mmc1_clk: clk@01c2008c {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc1",
"mmc1_output",
"mmc1_sample";
};
mmc2_clk: clk@01c20090 {
#clock-cells = <1>;
compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc2",
"mmc2_output",
"mmc2_sample";
};
nand_clk: clk@01c20080 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>;
clock-output-names = "nand";
};
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "allwinner,sun8i-a23-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
"usb_hsic_12M", "usb_ohci0";
};
};
soc@01c00000 {
@ -268,23 +127,23 @@
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
clocks = <&ccu CLK_BUS_DMA>;
resets = <&ccu RST_BUS_DMA>;
#dma-cells = <1>;
};
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ahb1_gates 8>,
<&mmc0_clk 0>,
<&mmc0_clk 1>,
<&mmc0_clk 2>;
clocks = <&ccu CLK_BUS_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 8>;
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -295,15 +154,15 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ahb1_gates 9>,
<&mmc1_clk 0>,
<&mmc1_clk 1>,
<&mmc1_clk 2>;
clocks = <&ccu CLK_BUS_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 9>;
resets = <&ccu RST_BUS_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -314,15 +173,15 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ahb1_gates 10>,
<&mmc2_clk 0>,
<&mmc2_clk 1>,
<&mmc2_clk 2>;
clocks = <&ccu CLK_BUS_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
resets = <&ahb1_rst 10>;
resets = <&ccu RST_BUS_MMC2>;
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@ -334,21 +193,51 @@
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 13>, <&nand_clk>;
clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 13>;
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@01c19000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c19000 0x0400>;
clocks = <&ccu CLK_BUS_OTG>;
resets = <&ccu RST_BUS_OTG>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@01c19400 {
/*
* compatible and address regions get set in
* SoC specific dtsi file
*/
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>;
clock-names = "usb0_phy",
"usb1_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>;
reset-names = "usb0_reset",
"usb1_reset";
status = "disabled";
#phy-cells = <1>;
};
ehci0: usb@01c1a000 {
compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 26>;
resets = <&ahb1_rst 26>;
clocks = <&ccu CLK_BUS_EHCI>;
resets = <&ccu RST_BUS_EHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
@ -358,18 +247,26 @@
compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 29>, <&usb_clk 16>;
resets = <&ahb1_rst 29>;
clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
resets = <&ccu RST_BUS_OHCI>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ccu: clock@01c20000 {
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@01c20800 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c20800 0x400>;
/* interrupts get set in SoC specific dtsi file */
clocks = <&apb1_gates 5>;
clocks = <&ccu CLK_BUS_PIO>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
@ -382,6 +279,16 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@ -435,24 +342,16 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
ahb1_rst: reset@01c202c0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202c0 0xc>;
};
apb1_rst: reset@01c202d0 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d0 0x4>;
};
apb2_rst: reset@01c202d8 {
#reset-cells = <1>;
compatible = "allwinner,sun6i-a31-clock-reset";
reg = <0x01c202d8 0x4>;
lcd_rgb666_pins: lcd-rgb666@0 {
allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
allwinner,function = "lcd0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
@ -490,8 +389,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
resets = <&apb2_rst 16>;
clocks = <&ccu CLK_BUS_UART0>;
resets = <&ccu RST_BUS_UART0>;
dmas = <&dma 6>, <&dma 6>;
dma-names = "rx", "tx";
status = "disabled";
@ -503,8 +402,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
resets = <&apb2_rst 17>;
clocks = <&ccu CLK_BUS_UART1>;
resets = <&ccu RST_BUS_UART1>;
dmas = <&dma 7>, <&dma 7>;
dma-names = "rx", "tx";
status = "disabled";
@ -516,8 +415,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
resets = <&apb2_rst 18>;
clocks = <&ccu CLK_BUS_UART2>;
resets = <&ccu RST_BUS_UART2>;
dmas = <&dma 8>, <&dma 8>;
dma-names = "rx", "tx";
status = "disabled";
@ -529,8 +428,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
resets = <&apb2_rst 19>;
clocks = <&ccu CLK_BUS_UART3>;
resets = <&ccu RST_BUS_UART3>;
dmas = <&dma 9>, <&dma 9>;
dma-names = "rx", "tx";
status = "disabled";
@ -542,8 +441,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
resets = <&apb2_rst 20>;
clocks = <&ccu CLK_BUS_UART4>;
resets = <&ccu RST_BUS_UART4>;
dmas = <&dma 10>, <&dma 10>;
dma-names = "rx", "tx";
status = "disabled";
@ -553,8 +452,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -564,8 +463,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@ -575,8 +474,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;

9
arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
Просмотреть файл

@ -53,6 +53,15 @@
status = "okay";
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3675";
firmware-name = "gsl3675-gt90h.fw";
touchscreen-size-x = <1792>;
touchscreen-size-y = <1024>;
status = "okay";
};
&lradc {
button@600 {
label = "Back";

9
arch/arm/boot/dts/sun8i-a23-inet86dz.dts
Просмотреть файл

@ -53,6 +53,15 @@
status = "okay";
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";
firmware-name = "gsl1680-inet86dz.fw";
touchscreen-size-x = <960>;
touchscreen-size-y = <640>;
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_dldo1>;
};

26
arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
Просмотреть файл

@ -62,6 +62,13 @@
};
};
&i2c1 {
mma7660: accelerometer@4c {
reg = <0x4c>;
compatible = "fsl,mma7660";
};
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
@ -90,3 +97,22 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&reg_ldo_io1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-touchscreen";
status = "okay";
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";
firmware-name = "gsl1680-polaroid-mid2407pxe03.fw";
touchscreen-size-x = <960>;
touchscreen-size-y = <640>;
touchscreen-inverted-x;
touchscreen-inverted-y;
vddio-supply = <&reg_ldo_io1>;
status = "okay";
};

9
arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
Просмотреть файл

@ -90,3 +90,12 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3670";
firmware-name = "gsl3670-polaroid-mid2809pxe04.fw";
touchscreen-size-x = <1660>;
touchscreen-size-y = <890>;
status = "okay";
};

80
arch/arm/boot/dts/sun8i-a23.dtsi
Просмотреть файл

@ -48,74 +48,10 @@
memory {
reg = <0x40000000 0x40000000>;
};
};
clocks {
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <6>,
<8>, <9>, <10>,
<13>, <14>,
<19>, <20>,
<21>, <24>, <26>,
<29>, <32>, <36>,
<40>, <44>, <46>,
<52>, <53>,
<54>, <57>;
clock-output-names = "ahb1_mipidsi", "ahb1_dma",
"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
"ahb1_nand", "ahb1_sdram",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
"ahb1_csi", "ahb1_be", "ahb1_fe",
"ahb1_gpu", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_drc";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5>;
clock-output-names = "mbus";
};
};
soc@01c00000 {
usb_otg: usb@01c19000 {
compatible = "allwinner,sun6i-a31-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ahb1_gates 24>;
resets = <&ahb1_rst 24>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
status = "disabled";
};
usbphy: phy@01c19400 {
compatible = "allwinner,sun8i-a23-usb-phy";
reg = <0x01c19400 0x10>,
<0x01c1a800 0x4>;
reg-names = "phy_ctrl",
"pmu1";
clocks = <&usb_clk 8>,
<&usb_clk 9>;
clock-names = "usb0_phy",
"usb1_phy";
resets = <&usb_clk 0>,
<&usb_clk 1>;
reset-names = "usb0_reset",
"usb1_reset";
status = "disabled";
#phy-cells = <1>;
};
};
&ccu {
compatible = "allwinner,sun8i-a23-ccu";
};
&pio {
@ -124,3 +60,13 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
&usb_otg {
compatible = "allwinner,sun6i-a31-musb";
};
&usbphy {
compatible = "allwinner,sun8i-a23-usb-phy";
reg = <0x01c19400 0x10>, <0x01c1a800 0x4>;
reg-names = "phy_ctrl", "pmu1";
};

10
arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
Просмотреть файл

@ -58,6 +58,16 @@
status = "okay";
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3675";
firmware-name = "gsl3675-ga10h.fw";
touchscreen-size-x = <1630>;
touchscreen-size-y = <990>;
touchscreen-inverted-y;
status = "okay";
};
&lradc {
button@600 {
label = "Back";

20
arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
Просмотреть файл

@ -49,6 +49,15 @@
model = "INet-D978 Rev 02";
compatible = "primux,inet-d978-rev2", "allwinner,sun8i-a33";
aliases {
serial0 = &uart1;
};
chosen {
/* Delete debug UART as serial0 is the UART for bluetooth */
/delete-property/stdout-path;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@ -86,3 +95,14 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
&r_uart {
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>,
<&uart1_pins_cts_rts_a>;
status = "okay";
};

244
arch/arm/boot/dts/sun8i-a33.dtsi
Просмотреть файл

@ -59,107 +59,179 @@
};
};
de: display-engine {
compatible = "allwinner,sun8i-a33-display-engine";
allwinner,pipelines = <&fe0>;
status = "disabled";
};
memory {
reg = <0x40000000 0x80000000>;
};
clocks {
/* Dummy clock for pll11 (DDR1) until actually implemented */
pll11: pll11_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
clock-output-names = "pll11";
};
ahb1_gates: clk@01c20060 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
clock-indices = <1>, <5>,
<6>, <8>, <9>,
<10>, <13>, <14>,
<19>, <20>,
<21>, <24>, <26>,
<29>, <32>, <36>,
<40>, <44>, <46>,
<52>, <53>,
<54>, <57>,
<58>;
clock-output-names = "ahb1_mipidsi", "ahb1_ss",
"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
"ahb1_hstimer", "ahb1_spi0",
"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
"ahb1_csi", "ahb1_be", "ahb1_fe",
"ahb1_gpu", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_drc",
"ahb1_sat";
};
ss_clk: clk@01c2009c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "ss";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
clock-output-names = "mbus";
};
};
soc@01c00000 {
tcon0: lcd-controller@01c0c000 {
compatible = "allwinner,sun8i-a33-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_LCD>,
<&ccu CLK_LCD_CH0>;
clock-names = "ahb",
"tcon-ch0";
clock-output-names = "tcon-pixel-clock";
resets = <&ccu RST_BUS_LCD>;
reset-names = "lcd";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_drc0: endpoint@0 {
reg = <0>;
remote-endpoint = <&drc0_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
crypto: crypto-engine@01c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 5>, <&ss_clk>;
clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 5>;
resets = <&ccu RST_BUS_SS>;
reset-names = "ahb";
};
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
clocks = <&ahb1_gates 24>;
resets = <&ahb1_rst 24>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
fe0: display-frontend@01e00000 {
compatible = "allwinner,sun8i-a33-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
<&ccu CLK_DRAM_DE_FE>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_BUS_DE_FE>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
};
};
};
usbphy: phy@01c19400 {
compatible = "allwinner,sun8i-a33-usb-phy";
reg = <0x01c19400 0x14>,
<0x01c1a800 0x4>;
reg-names = "phy_ctrl",
"pmu1";
clocks = <&usb_clk 8>,
<&usb_clk 9>;
clock-names = "usb0_phy",
"usb1_phy";
resets = <&usb_clk 0>,
<&usb_clk 1>;
reset-names = "usb0_reset",
"usb1_reset";
status = "disabled";
#phy-cells = <1>;
be0: display-backend@01e60000 {
compatible = "allwinner,sun8i-a33-display-backend";
reg = <0x01e60000 0x10000>, <0x01e80000 0x1000>;
reg-names = "be", "sat";
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
<&ccu CLK_DRAM_DE_BE>, <&ccu CLK_BUS_SAT>;
clock-names = "ahb", "mod",
"ram", "sat";
resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
reset-names = "be", "sat";
assigned-clocks = <&ccu CLK_DE_BE>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_drc0: endpoint@0 {
reg = <0>;
remote-endpoint = <&drc0_in_be0>;
};
};
};
};
drc0: drc@01e70000 {
compatible = "allwinner,sun8i-a33-drc";
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
<&ccu CLK_DRAM_DRC>;
clock-names = "ahb", "mod", "ram";
resets = <&ccu RST_BUS_DRC>;
assigned-clocks = <&ccu CLK_DRC>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
drc0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
drc0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
drc0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_drc0>;
};
};
};
};
};
};
&ccu {
compatible = "allwinner,sun8i-a33-ccu";
};
&pio {
compatible = "allwinner,sun8i-a33-pinctrl";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
@ -173,3 +245,13 @@
};
};
&usb_otg {
compatible = "allwinner,sun8i-a33-musb";
};
&usbphy {
compatible = "allwinner,sun8i-a33-usb-phy";
reg = <0x01c19400 0x14>, <0x01c1a800 0x4>;
reg-names = "phy_ctrl", "pmu1";
};

2
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
Просмотреть файл

@ -185,7 +185,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};

18
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
Просмотреть файл

@ -186,6 +186,24 @@
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usb1_vbus_pin_a {
allwinner,pins = "PG13";
};

18
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
Просмотреть файл

@ -139,6 +139,24 @@
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usbphy {
/* USB VBUS is always on */
status = "okay";

18
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
Просмотреть файл

@ -161,6 +161,24 @@
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
status = "disabled";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
status = "disabled";
};
&usbphy {
/* USB VBUS is always on */
status = "okay";

85
arch/arm/boot/dts/sun8i-h3.dtsi
Просмотреть файл

@ -327,6 +327,27 @@
interrupt-controller;
#interrupt-cells = <3>;
i2c0_pins: i2c0 {
allwinner,pins = "PA11", "PA12";
allwinner,function = "i2c0";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins: i2c1 {
allwinner,pins = "PA18", "PA19";
allwinner,function = "i2c1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins: i2c2 {
allwinner,pins = "PE12", "PE13";
allwinner,function = "i2c2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@ -367,12 +388,33 @@
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
uart1_pins: uart1 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_rts_cts_pins: uart1_rts_cts {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins: uart2 {
allwinner,pins = "PA0", "PA1";
allwinner,function = "uart2";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins: uart3 {
allwinner,pins = "PG13", "PG14";
allwinner,function = "uart3";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
@ -449,6 +491,45 @@
status = "disabled";
};
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@01c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,

116
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
Просмотреть файл

@ -253,6 +253,122 @@
reg_rtc_ldo: rtc_ldo {
regulator-name = "vcc-rtc-vdd1v8-io";
};
sw {
/* unused */
};
};
};
axp806: pmic@745 {
compatible = "x-powers,axp806";
reg = <0x745>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
bldoin-supply = <&reg_dcdce>;
regulators {
reg_s_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
aldo2 {
/*
* unused, but use a different name to
* avoid name clash with axp809's aldo's
*/
regulator-name = "s_aldo2";
};
aldo3 {
/*
* unused, but use a different name to
* avoid name clash with axp809's aldo's
*/
regulator-name = "s_aldo3";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-name = "vcc18-efuse-adc-display-csi";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-name =
"vdd18-drampll-vcc18-pll-cpvdd";
};
bldo3 {
/* unused */
};
reg_bldo4: bldo4 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vcc12-hsic";
};
reg_cldo1: cldo1 {
/*
* This was 3V in the original design, but
* 3.3V is the recommended supply voltage
* for the Ethernet PHY.
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
reg_cldo2: cldo2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-cam";
};
reg_cldo3: cldo3 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io-wifi-codec-io2";
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpub";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-vpu";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
regulator-name = "vcc-bldo-codec-ldoin";
};
sw {
/*
* unused, but use a different name to
* avoid name clash with axp809's sw
*/
regulator-name = "s_sw";
};
};
};

123
arch/arm/boot/dts/sun9i-a80-optimus.dts
Просмотреть файл

@ -112,7 +112,8 @@
};
&ehci1 {
status = "okay";
/* Enable if HSIC peripheral is connected */
status = "disabled";
};
&ehci2 {
@ -325,6 +326,122 @@
reg_rtc_ldo: rtc_ldo {
regulator-name = "vcc-rtc-vdd1v8-io";
};
sw {
/* unused */
};
};
};
axp806: pmic@745 {
compatible = "x-powers,axp806";
reg = <0x745>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
bldoin-supply = <&reg_dcdce>;
regulators {
reg_s_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
aldo2 {
/*
* unused, but use a different name to
* avoid name clash with axp809's aldo's
*/
regulator-name = "s_aldo2";
};
aldo3 {
/*
* unused, but use a different name to
* avoid name clash with axp809's aldo's
*/
regulator-name = "s_aldo3";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-name = "vcc18-efuse-adc-display-csi";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
regulator-name =
"vdd18-drampll-vcc18-pll-cpvdd";
};
bldo3 {
/* unused */
};
reg_bldo4: bldo4 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vcc12-hsic";
};
reg_cldo1: cldo1 {
/*
* This was 3V in the original design, but
* 3.3V is the recommended supply voltage
* for the Ethernet PHY.
*/
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-gmac-phy";
};
reg_cldo2: cldo2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-cam";
};
reg_cldo3: cldo3 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "vcc-io-wifi-codec-io2";
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-cpub";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-vpu";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
regulator-name = "vcc-bldo-codec-ldoin";
};
sw {
/*
* unused, but use a different name to
* avoid name clash with axp809's sw
*/
regulator-name = "s_sw";
};
};
};
@ -367,7 +484,9 @@
};
&usbphy2 {
status = "okay";
phy-supply = <&reg_bldo4>;
/* Enable if HSIC peripheral is connected */
status = "disabled";
};
&usbphy3 {

36
arch/arm/mach-integrator/integrator_ap.c
Просмотреть файл

@ -17,33 +17,19 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/syscore_ops.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/stat.h>
#include <linux/termios.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "hardware.h"
#include "cm.h"
@ -68,14 +54,8 @@ static void __iomem *ebi_base;
/*
* Logical Physical
* ef000000 Cache flush
* f1100000 11000000 System controller registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
* f1700000 17000000 UART 1
* f1a00000 1a000000 Debug LEDs
* f1b00000 1b000000 GPIO
*/
static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
@ -89,16 +69,6 @@ static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
.pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}
};
@ -196,16 +166,10 @@ static void __init ap_init_irq_of(void)
/* For the Device Tree, add in the UART callbacks as AUXDATA */
static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
"rtc", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
"uart0", &ap_uart_data),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
"uart1", &ap_uart_data),
OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
"kmi0", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
"kmi1", NULL),
{ /* sentinel */ },
};

123
arch/arm/mach-integrator/integrator_cp.c
Просмотреть файл

@ -7,67 +7,40 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/string.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
#include <linux/platform_data/video-clcd-versatile.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/gfp.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/sched_clock.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "hardware.h"
#include "cm.h"
#include "common.h"
/* Base address to the core module header */
static struct regmap *cm_map;
/* Base address to the CP controller */
static void __iomem *intcp_con_base;
#define INTCP_PA_CLCD_BASE 0xc0000000
#define CM_COUNTER_OFFSET 0x28
/*
* Logical Physical
* f1000000 10000000 Core module registers
* f1300000 13000000 Counter/Timer
* f1400000 14000000 Interrupt controller
* f1600000 16000000 UART 0
* f1700000 17000000 UART 1
* f1a00000 1a000000 Debug LEDs
* fc900000 c9000000 GPIO
* fca00000 ca000000 SIC
*/
static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
{
.virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
.length = SZ_4K,
@ -77,16 +50,6 @@ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
.pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
@ -121,66 +84,20 @@ static struct mmci_platform_data mmc_data = {
.gpio_cd = -1,
};
/*
* CLCD support
*/
/*
* Ensure VGA is selected.
*/
static void cp_clcd_enable(struct clcd_fb *fb)
{
struct fb_var_screeninfo *var = &fb->fb.var;
u32 val = CM_CTRL_STATIC1 | CM_CTRL_STATIC2
| CM_CTRL_LCDEN0 | CM_CTRL_LCDEN1;
if (var->bits_per_pixel <= 8 ||
(var->bits_per_pixel == 16 && var->green.length == 5))
/* Pseudocolor, RGB555, BGR555 */
val |= CM_CTRL_LCDMUXSEL_VGA555_TFT555;
else if (fb->fb.var.bits_per_pixel <= 16)
/* truecolor RGB565 */
val |= CM_CTRL_LCDMUXSEL_VGA565_TFT555;
else
val = 0; /* no idea for this, don't trust the docs */
cm_control(CM_CTRL_LCDMUXSEL_MASK|
CM_CTRL_LCDEN0|
CM_CTRL_LCDEN1|
CM_CTRL_STATIC1|
CM_CTRL_STATIC2|
CM_CTRL_STATIC|
CM_CTRL_n24BITEN, val);
}
static int cp_clcd_setup(struct clcd_fb *fb)
{
fb->panel = versatile_clcd_get_panel("VGA");
if (!fb->panel)
return -EINVAL;
return versatile_clcd_setup_dma(fb, SZ_1M);
}
static struct clcd_board clcd_data = {
.name = "Integrator/CP",
.caps = CLCD_CAP_5551 | CLCD_CAP_RGB565 | CLCD_CAP_888,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = cp_clcd_enable,
.setup = cp_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
};
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static u64 notrace intcp_read_sched_clock(void)
{
return readl(REFCOUNTER);
unsigned int val;
/* MMIO so discard return code */
regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
return val;
}
static void __init intcp_init_early(void)
{
cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
if (IS_ERR(cm_map))
return;
sched_clock_register(intcp_read_sched_clock, 32, 24000000);
}
@ -195,22 +112,8 @@ static void __init intcp_init_irq_of(void)
* and enforce the bus names since these are used for clock lookups.
*/
static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE,
"rtc", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE,
"uart1", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI0_BASE,
"kmi0", NULL),
OF_DEV_AUXDATA("arm,primecell", KMI1_BASE,
"kmi1", NULL),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
"mmci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE,
"aaci", &mmc_data),
OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE,
"clcd", &clcd_data),
{ /* sentinel */ },
};

11
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
Просмотреть файл

@ -87,3 +87,14 @@
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&i2c_A {
status = "okay";
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};

6
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
Просмотреть файл

@ -50,3 +50,9 @@
compatible = "amlogic,p200", "amlogic,meson-gxbb";
model = "Amlogic Meson GXBB P200 Development Board";
};
&i2c_B {
status = "okay";
pinctrl-0 = <&i2c_b_pins>;
pinctrl-names = "default";
};

35
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
Просмотреть файл

@ -57,6 +57,19 @@
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
usb_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
/* signal name in schematic: USB_PWR_EN */
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
/* This UART is brought out to the DB9 connector */
@ -72,3 +85,25 @@
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_pwr>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};

42
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
Просмотреть файл

@ -52,6 +52,19 @@
chosen {
stdout-path = "serial0:115200n8";
};
usb_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "USB0_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&uart_AO {
@ -60,3 +73,32 @@
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_vbus>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};

329
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
Просмотреть файл

@ -45,6 +45,9 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>
/ {
compatible = "amlogic,meson-gxbb";
@ -99,6 +102,30 @@
method = "smc";
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@ -124,6 +151,25 @@
#size-cells = <2>;
ranges;
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000000 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
clock-names = "usb_general", "usb";
status = "disabled";
};
usb1_phy: phy@c0000020 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
@ -153,6 +199,27 @@
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
@ -160,6 +227,51 @@
clocks = <&xtal>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
@ -203,6 +315,56 @@
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
uart_AO: serial@4c0 {
@ -212,6 +374,30 @@
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
@ -251,6 +437,16 @@
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
@ -263,6 +459,25 @@
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
@ -287,6 +502,30 @@
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
@ -306,6 +545,55 @@
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
};
};
@ -321,6 +609,15 @@
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
mailbox: mailbox@404 {
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
apb: apb@d0000000 {
@ -331,14 +628,40 @@
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
usb0: usb@c9000000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9000000 0x0 0x40000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb0_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
usb1: usb@c9100000 {
compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
reg = <0x0 0xc9100000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "otg";
phys = <&usb1_phy>;
phy-names = "usb2-phy";
dr_mode = "host";
status = "disabled";
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson6-dwmac", "snps,dwmac";
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&xtal>;
clock-names = "stmmaceth";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
status = "disabled";
};

2
arch/arm64/boot/dts/renesas/Makefile
Просмотреть файл

@ -1,4 +1,4 @@
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb
always := $(dtb-y)

328
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts Normal file
Просмотреть файл

@ -0,0 +1,328 @@
/*
* Device Tree Source for the H3ULCB board
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2016 Cogent Embedded, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
#include "r8a7795.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Renesas H3ULCB board based on r8a7795";
compatible = "renesas,h3ulcb", "renesas,r8a7795";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
leds {
compatible = "gpio-leds";
led5 {
gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
};
led6 {
gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
};
};
keyboard {
compatible = "gpio-keys";
key-1 {
linux,code = <KEY_1>;
label = "SW3";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
rsnd_ak4613: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4613>;
};
};
};
&extal_clk {
clock-frequency = <16666666>;
};
&extalr_clk {
clock-frequency = <32768>;
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
scif_clk_pins: scif_clk {
groups = "scif_clk_a";
function = "scif_clk";
};
i2c2_pins: i2c2 {
groups = "i2c2_a";
function = "i2c2";
};
avb_pins: avb {
groups = "avb_mdc";
function = "avb";
};
sdhi0_pins_3v3: sd0_3v3 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_1v8: sd0_1v8 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
function = "ssi";
};
sound_clk_pins: sound-clk {
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout3_a";
function = "audio_clk";
};
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
};
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
status = "okay";
};
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <100000>;
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x12_clk>;
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
};
&rcar_sound {
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <11289600>;
status = "okay";
/* update <audio_clk_b> to <cs2000> */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>,
<&audio_clk_c>,
<&cpg CPG_CORE R8A7795_CLK_S0D4>;
rcar_sound,dai {
dai0 {
playback = <&ssi0 &src0 &dvc0>;
capture = <&ssi1 &src1 &dvc1>;
};
};
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins_3v3>;
pinctrl-1 = <&sdhi0_pins_1v8>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
status = "okay";
};
&ssi1 {
shared-pin;
};
&wdt0 {
timeout-sec = <60>;
status = "okay";
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <900>;
rxdv-skew-ps = <0>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
rxd3-skew-ps = <0>;
txc-skew-ps = <900>;
txen-skew-ps = <0>;
txd0-skew-ps = <0>;
txd1-skew-ps = <0>;
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};
&ehci1 {
status = "okay";
};
&ohci1 {
status = "okay";
};

87
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
Просмотреть файл

@ -110,6 +110,17 @@
1800000 0>;
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
audio_clkout: audio_clkout {
/*
* This is same as <&rcar_sound 0>
@ -135,6 +146,52 @@
sound-dai = <&ak4613>;
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&extal_clk {
@ -172,6 +229,11 @@
function = "avb";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
function = "du";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@ -193,6 +255,11 @@
function = "audio_clk";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
@ -369,6 +436,14 @@
status = "okay";
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
@ -383,6 +458,10 @@
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
@ -391,6 +470,10 @@
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
@ -399,6 +482,10 @@
status = "okay";
};
&hsusb {
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
status = "okay";

276
arch/arm64/boot/dts/renesas/r8a7795.dtsi
Просмотреть файл

@ -328,7 +328,8 @@
};
audma0: dma-controller@ec700000 {
compatible = "renesas,rcar-dmac";
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
@ -360,7 +361,8 @@
};
audma1: dma-controller@ec720000 {
compatible = "renesas,rcar-dmac";
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
@ -1098,6 +1100,7 @@
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 314>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@ -1107,6 +1110,7 @@
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 313>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
@ -1116,8 +1120,8 @@
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 312>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@ -1126,8 +1130,8 @@
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 311>;
max-frequency = <200000000>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
cap-mmc-highspeed;
status = "disabled";
};
@ -1224,6 +1228,23 @@
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7795",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
pciec0: pcie@fe000000 {
compatible = "renesas,pcie-r8a7795";
reg = <0 0xfe000000 0 0x80000>;
@ -1273,5 +1294,252 @@
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
};
vspbc: vsp@fe920000 {
compatible = "renesas,vsp2";
reg = <0 0xfe920000 0 0x8000>;
interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 624>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpvb1>;
};
fcpvb1: fcp@fe92f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfe92f000 0 0x200>;
clocks = <&cpg CPG_MOD 606>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
fcpf0: fcp@fe950000 {
compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
clocks = <&cpg CPG_MOD 615>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
fcpf1: fcp@fe951000 {
compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
reg = <0 0xfe951000 0 0x200>;
clocks = <&cpg CPG_MOD 614>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
fcpf2: fcp@fe952000 {
compatible = "renesas,r8a7795-fcpf", "renesas,fcpf";
reg = <0 0xfe952000 0 0x200>;
clocks = <&cpg CPG_MOD 613>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
vspbd: vsp@fe960000 {
compatible = "renesas,vsp2";
reg = <0 0xfe960000 0 0x8000>;
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 626>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpvb0>;
};
fcpvb0: fcp@fe96f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfe96f000 0 0x200>;
clocks = <&cpg CPG_MOD 607>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
vspi0: vsp@fe9a0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9a0000 0 0x8000>;
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 631>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpvi0>;
};
fcpvi0: fcp@fe9af000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfe9af000 0 0x200>;
clocks = <&cpg CPG_MOD 611>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
vspi1: vsp@fe9b0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9b0000 0 0x8000>;
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 630>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpvi1>;
};
fcpvi1: fcp@fe9bf000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfe9bf000 0 0x200>;
clocks = <&cpg CPG_MOD 610>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
vspi2: vsp@fe9c0000 {
compatible = "renesas,vsp2";
reg = <0 0xfe9c0000 0 0x8000>;
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 629>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpvi2>;
};
fcpvi2: fcp@fe9cf000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfe9cf000 0 0x200>;
clocks = <&cpg CPG_MOD 609>;
power-domains = <&sysc R8A7795_PD_A3VP>;
};
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x4000>;
interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 623>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,fcp = <&fcpvd0>;
};
fcpvd0: fcp@fea27000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfea27000 0 0x200>;
clocks = <&cpg CPG_MOD 603>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
vspd1: vsp@fea28000 {
compatible = "renesas,vsp2";
reg = <0 0xfea28000 0 0x4000>;
interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 622>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,fcp = <&fcpvd1>;
};
fcpvd1: fcp@fea2f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
vspd2: vsp@fea30000 {
compatible = "renesas,vsp2";
reg = <0 0xfea30000 0 0x4000>;
interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 621>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,fcp = <&fcpvd2>;
};
fcpvd2: fcp@fea37000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfea37000 0 0x200>;
clocks = <&cpg CPG_MOD 601>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
vspd3: vsp@fea38000 {
compatible = "renesas,vsp2";
reg = <0 0xfea38000 0 0x4000>;
interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 620>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
renesas,fcp = <&fcpvd3>;
};
fcpvd3: fcp@fea3f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
reg = <0 0xfea3f000 0 0x200>;
clocks = <&cpg CPG_MOD 600>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
};
fdp1@fe940000 {
compatible = "renesas,fdp1";
reg = <0 0xfe940000 0 0x2400>;
interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 119>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpf0>;
};
fdp1@fe944000 {
compatible = "renesas,fdp1";
reg = <0 0xfe944000 0 0x2400>;
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 118>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpf1>;
};
fdp1@fe948000 {
compatible = "renesas,fdp1";
reg = <0 0xfe948000 0 0x2400>;
interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 117>;
power-domains = <&sysc R8A7795_PD_A3VP>;
renesas,fcp = <&fcpf2>;
};
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>,
<0 0xfeb90000 0 0x14>;
reg-names = "du", "lvds.0";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
<&cpg CPG_MOD 727>;
clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2 &vspd3>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
du_out_rgb: endpoint {
};
};
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
};
};
port@2 {
reg = <2>;
du_out_hdmi1: endpoint {
};
};
port@3 {
reg = <3>;
du_out_lvds0: endpoint {
};
};
};
};
};
};

16
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
Просмотреть файл

@ -31,11 +31,27 @@
};
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
scif_clk_pins: scif_clk {
groups = "scif_clk_a";
function = "scif_clk";
};
};
&extal_clk {
clock-frequency = <16666666>;
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};

117
arch/arm64/boot/dts/renesas/r8a7796.dtsi
Просмотреть файл

@ -107,6 +107,123 @@
status = "disabled";
};
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 16>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 29>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 15>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 16>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 18>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 26>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
gpio7: gpio@e6055800 {
compatible = "renesas,gpio-r8a7796",
"renesas,gpio-rcar";
reg = <0 0xe6055800 0 0x50>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 224 4>;
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 905>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
};
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a7796";
reg = <0 0xe6060000 0 0x50c>;
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7796-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;

18
drivers/clk/meson/gxbb.h
Просмотреть файл

@ -183,14 +183,14 @@
/* CLKID_CLK81 */
#define CLKID_MPLL0 13
#define CLKID_MPLL1 14
#define CLKID_MPLL2 15
/* CLKID_MPLL2 */
#define CLKID_DDR 16
#define CLKID_DOS 17
#define CLKID_ISA 18
#define CLKID_PL301 19
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
#define CLKID_I2C 22
/* CLKID_I2C */
#define CLKID_SAR_ADC 23
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
@ -202,7 +202,7 @@
#define CLKID_ABUF 31
#define CLKID_HIU_IFACE 32
#define CLKID_ASSIST_MISC 33
#define CLKID_SPI 34
/* CLKID_SPI */
#define CLKID_I2S_SPDIF 35
#define CLKID_ETH 36
#define CLKID_DEMUX 37
@ -218,12 +218,12 @@
#define CLKID_AIU 47
#define CLKID_UART1 48
#define CLKID_G2D 49
#define CLKID_USB0 50
#define CLKID_USB1 51
/* CLKID_USB0 */
/* CLKID_USB1 */
#define CLKID_RESET 52
#define CLKID_NAND 53
#define CLKID_DOS_PARSER 54
#define CLKID_USB 55
/* CLKID_USB */
#define CLKID_VDIN1 56
#define CLKID_AHB_ARB0 57
#define CLKID_EFUSE 58
@ -232,8 +232,8 @@
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
/* CLKID_USB1_DDR_BRIDGE */
/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
@ -261,7 +261,7 @@
#define CLKID_AO_AHB_SRAM 90
#define CLKID_AO_AHB_BUS 91
#define CLKID_AO_IFACE 92
#define CLKID_AO_I2C 93
/* CLKID_AO_I2C */
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */

6
drivers/net/ethernet/stmicro/stmmac/Kconfig
Просмотреть файл

@ -61,13 +61,13 @@ config DWMAC_LPC18XX
config DWMAC_MESON
tristate "Amlogic Meson dwmac support"
default ARCH_MESON
depends on OF && (ARCH_MESON || COMPILE_TEST)
depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
help
Support for Ethernet controller on Amlogic Meson SoCs.
This selects the Amlogic Meson SoC glue layer support for
the stmmac device driver. This driver is used for Meson6 and
Meson8 SoCs.
the stmmac device driver. This driver is used for Meson6,
Meson8, Meson8b and GXBB SoCs.
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"

2
drivers/net/ethernet/stmicro/stmmac/Makefile
Просмотреть файл

@ -9,7 +9,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o

4
drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* Amlogic Meson DWMAC glue layer
* Amlogic Meson6 and Meson8 DWMAC glue layer
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
*
@ -96,5 +96,5 @@ static struct platform_driver meson6_dwmac_driver = {
module_platform_driver(meson6_dwmac_driver);
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
MODULE_DESCRIPTION("Amlogic Meson DWMAC glue layer");
MODULE_DESCRIPTION("Amlogic Meson6 and Meson8 DWMAC glue layer");
MODULE_LICENSE("GPL v2");

324
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c Normal file
Просмотреть файл

@ -0,0 +1,324 @@
/*
* Amlogic Meson8b and GXBB DWMAC glue layer
*
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/ethtool.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/of_net.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/stmmac.h>
#include "stmmac_platform.h"
#define PRG_ETH0 0x0
#define PRG_ETH0_RGMII_MODE BIT(0)
/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
/* divider for the result of m250_sel */
#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
#define PRG_ETH0_CLK_M250_DIV_WIDTH 3
/* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
#define PRG_ETH0_CLK_M25_DIV_SHIFT 10
#define PRG_ETH0_CLK_M25_DIV_WIDTH 1
#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)
#define MUX_CLK_NUM_PARENTS 2
struct meson8b_dwmac {
struct platform_device *pdev;
void __iomem *regs;
phy_interface_t phy_mode;
struct clk_mux m250_mux;
struct clk *m250_mux_clk;
struct clk *m250_mux_parent[MUX_CLK_NUM_PARENTS];
struct clk_divider m250_div;
struct clk *m250_div_clk;
struct clk_divider m25_div;
struct clk *m25_div_clk;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
u32 mask, u32 value)
{
u32 data;
data = readl(dwmac->regs + reg);
data &= ~mask;
data |= (value & mask);
writel(data, dwmac->regs + reg);
}
static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
{
struct clk_init_data init;
int i, ret;
struct device *dev = &dwmac->pdev->dev;
char clk_name[32];
const char *clk_div_parents[1];
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
static struct clk_div_table clk_25m_div_table[] = {
{ .val = 0, .div = 5 },
{ .val = 1, .div = 10 },
{ /* sentinel */ },
};
/* get the mux parents from DT */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
if (IS_ERR(dwmac->m250_mux_parent[i])) {
ret = PTR_ERR(dwmac->m250_mux_parent[i]);
if (ret != -EPROBE_DEFER)
dev_err(dev, "Missing clock %s\n", name);
return ret;
}
mux_parent_names[i] =
__clk_get_name(dwmac->m250_mux_parent[i]);
}
/* create the m250_mux */
snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
init.name = clk_name;
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
init.num_parents = MUX_CLK_NUM_PARENTS;
dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
dwmac->m250_mux.flags = 0;
dwmac->m250_mux.table = NULL;
dwmac->m250_mux.hw.init = &init;
dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
return PTR_ERR(dwmac->m250_mux_clk);
/* create the m250_div */
snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
init.parent_names = clk_div_parents;
init.num_parents = ARRAY_SIZE(clk_div_parents);
dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
dwmac->m250_div.hw.init = &init;
dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
return PTR_ERR(dwmac->m250_div_clk);
/* create the m25_div */
snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
init.ops = &clk_divider_ops;
init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
init.parent_names = clk_div_parents;
init.num_parents = ARRAY_SIZE(clk_div_parents);
dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
dwmac->m25_div.table = clk_25m_div_table;
dwmac->m25_div.hw.init = &init;
dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;
dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
return PTR_ERR(dwmac->m25_div_clk);
return 0;
}
static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
{
int ret;
unsigned long clk_rate;
switch (dwmac->phy_mode) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
/* Generate a 25MHz clock for the PHY */
clk_rate = 25 * 1000 * 1000;
/* enable RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
PRG_ETH0_RGMII_MODE);
/* only relevant for RMII mode -> disable in RGMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK, 0);
/* TX clock delay - all known boards use a 1/4 cycle delay */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
PRG_ETH0_TXDLY_QUARTER);
break;
case PHY_INTERFACE_MODE_RMII:
/* Use the rate of the mux clock for the internal RMII PHY */
clk_rate = clk_get_rate(dwmac->m250_mux_clk);
/* disable RGMII mode -> enables RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
0);
/* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
PRG_ETH0_INVERTED_RMII_CLK,
PRG_ETH0_INVERTED_RMII_CLK);
/* TX clock delay cannot be configured in RMII mode */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
0);
break;
default:
dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
phy_modes(dwmac->phy_mode));
return -EINVAL;
}
ret = clk_prepare_enable(dwmac->m25_div_clk);
if (ret) {
dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
return ret;
}
ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
if (ret) {
clk_disable_unprepare(dwmac->m25_div_clk);
dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
return ret;
}
/* enable TX_CLK and PHY_REF_CLK generator */
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
PRG_ETH0_TX_AND_PHY_REF_CLK);
return 0;
}
static int meson8b_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
struct resource *res;
struct meson8b_dwmac *dwmac;
int ret;
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
if (!dwmac)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(dwmac->regs))
return PTR_ERR(dwmac->regs);
dwmac->pdev = pdev;
dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
if (dwmac->phy_mode < 0) {
dev_err(&pdev->dev, "missing phy-mode property\n");
return -EINVAL;
}
ret = meson8b_init_clk(dwmac);
if (ret)
return ret;
ret = meson8b_init_prg_eth(dwmac);
if (ret)
return ret;
plat_dat->bsp_priv = dwmac;
return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
static int meson8b_dwmac_remove(struct platform_device *pdev)
{
struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
clk_disable_unprepare(dwmac->m25_div_clk);
return stmmac_pltfr_remove(pdev);
}
static const struct of_device_id meson8b_dwmac_match[] = {
{ .compatible = "amlogic,meson8b-dwmac" },
{ .compatible = "amlogic,meson-gxbb-dwmac" },
{ }
};
MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
static struct platform_driver meson8b_dwmac_driver = {
.probe = meson8b_dwmac_probe,
.remove = meson8b_dwmac_remove,
.driver = {
.name = "meson8b-dwmac",
.pm = &stmmac_pltfr_pm_ops,
.of_match_table = meson8b_dwmac_match,
},
};
module_platform_driver(meson8b_dwmac_driver);
MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
MODULE_LICENSE("GPL v2");

8
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
Просмотреть файл

@ -30,4 +30,12 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
int stmmac_pltfr_remove(struct platform_device *pdev);
extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
static inline void *get_stmmac_bsp_priv(struct device *dev)
{
struct net_device *ndev = dev_get_drvdata(dev);
struct stmmac_priv *priv = netdev_priv(ndev);
return priv->plat->bsp_priv;
}
#endif /* __STMMAC_PLATFORM_H__ */

34
drivers/usb/dwc2/platform.c
Просмотреть файл

@ -182,6 +182,38 @@ static const struct dwc2_core_params params_ltq = {
.hibernation = -1,
};
static const struct dwc2_core_params params_amlogic = {
.otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE,
.otg_ver = -1,
.dma_enable = 1,
.dma_desc_enable = 0,
.dma_desc_fs_enable = 0,
.speed = DWC2_SPEED_PARAM_HIGH,
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = -1,
.host_rx_fifo_size = 512,
.host_nperio_tx_fifo_size = 500,
.host_perio_tx_fifo_size = 500,
.max_transfer_size = -1,
.max_packet_count = -1,
.host_channels = 16,
.phy_type = DWC2_PHY_TYPE_PARAM_UTMI,
.phy_utmi_width = -1,
.phy_ulpi_ddr = -1,
.phy_ulpi_ext_vbus = -1,
.i2c_enable = -1,
.ulpi_fs_ls = -1,
.host_support_fs_ls_low_power = -1,
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = 1,
.ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = 0,
.external_id_pin_ctl = -1,
.hibernation = -1,
};
/*
* Check the dr_mode against the module configuration and hardware
* capabilities.
@ -486,6 +518,8 @@ static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
{ .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);

9
include/dt-bindings/clock/gxbb-clkc.h
Просмотреть файл

@ -11,7 +11,16 @@
#define CLKID_FCLK_DIV3 5
#define CLKID_FCLK_DIV4 6
#define CLKID_CLK81 12
#define CLKID_MPLL2 15
#define CLKID_SPI 34
#define CLKID_I2C 22
#define CLKID_ETH 36
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_USB1_DDR_BRIDGE 64
#define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96