microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'drm-intel-fixes' into drm-intel-next 

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_ringbuffer.c
This commit is contained in:
Chris Wilson 2010-11-15 06:49:30 +00:00
Родитель df15315899 1bb95834bb
Коммит c94f28c383
4272 изменённых файлов: 551697 добавлений и 229569 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

22
Documentation/ABI/obsolete/proc-pid-oom_adj Normal file
Просмотреть файл

@ -0,0 +1,22 @@
What: /proc/<pid>/oom_adj
When: August 2012
Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
badness heuristic used to determine which task to kill when the kernel
is out of memory.
The badness heuristic has since been rewritten since the introduction of
this tunable such that its meaning is deprecated. The value was
implemented as a bitshift on a score generated by the badness()
function that did not have any precise units of measure. With the
rewrite, the score is given as a proportion of available memory to the
task allocating pages, so using a bitshift which grows the score
exponentially is, thus, impossible to tune with fine granularity.
A much more powerful interface, /proc/<pid>/oom_score_adj, was
introduced with the oom killer rewrite that allows users to increase or
decrease the badness() score linearly. This interface will replace
/proc/<pid>/oom_adj.
A warning will be emitted to the kernel log if an application uses this
deprecated interface. After it is printed once, future warnings will be
suppressed until the kernel is rebooted.

99
Documentation/ABI/testing/sysfs-block-zram Normal file
Просмотреть файл

@ -0,0 +1,99 @@
What: /sys/block/zram<id>/disksize
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The disksize file is read-write and specifies the disk size
which represents the limit on the *uncompressed* worth of data
that can be stored in this disk.
What: /sys/block/zram<id>/initstate
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The disksize file is read-only and shows the initialization
state of the device.
What: /sys/block/zram<id>/reset
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The disksize file is write-only and allows resetting the
device. The reset operation frees all the memory assocaited
with this device.
What: /sys/block/zram<id>/num_reads
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The num_reads file is read-only and specifies the number of
reads (failed or successful) done on this device.
What: /sys/block/zram<id>/num_writes
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The num_writes file is read-only and specifies the number of
writes (failed or successful) done on this device.
What: /sys/block/zram<id>/invalid_io
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The invalid_io file is read-only and specifies the number of
non-page-size-aligned I/O requests issued to this device.
What: /sys/block/zram<id>/notify_free
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The notify_free file is read-only and specifies the number of
swap slot free notifications received by this device. These
notifications are send to a swap block device when a swap slot
is freed. This statistic is applicable only when this disk is
being used as a swap disk.
What: /sys/block/zram<id>/discard
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The discard file is read-only and specifies the number of
discard requests received by this device. These requests
provide information to block device regarding blocks which are
no longer used by filesystem.
What: /sys/block/zram<id>/zero_pages
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The zero_pages file is read-only and specifies number of zero
filled pages written to this disk. No memory is allocated for
such pages.
What: /sys/block/zram<id>/orig_data_size
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The orig_data_size file is read-only and specifies uncompressed
size of data stored in this disk. This excludes zero-filled
pages (zero_pages) since no memory is allocated for them.
Unit: bytes
What: /sys/block/zram<id>/compr_data_size
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The compr_data_size file is read-only and specifies compressed
size of data stored in this disk. So, compression ratio can be
calculated using orig_data_size and this statistic.
Unit: bytes
What: /sys/block/zram<id>/mem_used_total
Date: August 2010
Contact: Nitin Gupta <ngupta@vflare.org>
Description:
The mem_used_total file is read-only and specifies the amount
of memory, including allocator fragmentation and metadata
overhead, allocated for this disk. So, allocator space
efficiency can be calculated using compr_data_size and this
statistic.
Unit: bytes

13
Documentation/DocBook/kgdb.tmpl
Просмотреть файл

@ -710,7 +710,18 @@ Task Addr Pid Parent [*] cpu State Thread Command
<listitem><para>A simple shell</para></listitem>
<listitem><para>The kdb core command set</para></listitem>
<listitem><para>A registration API to register additional kdb shell commands.</para>
<para>A good example of a self-contained kdb module is the "ftdump" command for dumping the ftrace buffer. See: kernel/trace/trace_kdb.c</para></listitem>
<itemizedlist>
<listitem><para>A good example of a self-contained kdb module
is the "ftdump" command for dumping the ftrace buffer. See:
kernel/trace/trace_kdb.c</para></listitem>
<listitem><para>For an example of how to dynamically register
a new kdb command you can build the kdb_hello.ko kernel module
from samples/kdb/kdb_hello.c. To build this example you can
set CONFIG_SAMPLES=y and CONFIG_SAMPLE_KDB=m in your kernel
config. Later run "modprobe kdb_hello" and the next time you
enter the kdb shell, you can run the "hello"
command.</para></listitem>
</itemizedlist></listitem>
<listitem><para>The implementation for kdb_printf() which
emits messages directly to I/O drivers, bypassing the kernel
log.</para></listitem>

6
Documentation/DocBook/media-entities.tmpl
Просмотреть файл

@ -250,6 +250,9 @@
<!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
<!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
<!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
<!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
<!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
<!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
@ -347,6 +350,9 @@
<!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml">
<!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml">
<!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml">
<!ENTITY srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
<!ENTITY srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
<!ENTITY y10 SYSTEM "v4l/pixfmt-y10.xml">
<!ENTITY cropcap SYSTEM "v4l/vidioc-cropcap.xml">
<!ENTITY dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">
<!ENTITY encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml">

24
Documentation/DocBook/v4l/compat.xml
Просмотреть файл

@ -21,11 +21,15 @@ API.</para>
<title>Opening and Closing Devices</title>
<para>For compatibility reasons the character device file names
recommended for V4L2 video capture, overlay, radio, teletext and raw
recommended for V4L2 video capture, overlay, radio and raw
vbi capture devices did not change from those used by V4L. They are
listed in <xref linkend="devices" /> and below in <xref
linkend="v4l-dev" />.</para>
<para>The teletext devices (minor range 192-223) have been removed in
V4L2 and no longer exist. There is no hardware available anymore for handling
pure teletext. Instead raw or sliced VBI is used.</para>
<para>The V4L <filename>videodev</filename> module automatically
assigns minor numbers to drivers in load order, depending on the
registered device type. We recommend that V4L2 drivers by default
@ -65,13 +69,6 @@ not compatible with V4L or V4L2.</para> </footnote>,
<filename>/dev/radio63</filename></para></entry>
<entry>64-127</entry>
</row>
<row>
<entry>Teletext decoder</entry>
<entry><para><filename>/dev/vtx</filename>,
<filename>/dev/vtx0</filename> to
<filename>/dev/vtx31</filename></para></entry>
<entry>192-223</entry>
</row>
<row>
<entry>Raw VBI capture</entry>
<entry><para><filename>/dev/vbi</filename>,
@ -2345,6 +2342,17 @@ more information.</para>
</listitem>
</orderedlist>
</section>
<section>
<title>V4L2 in Linux 2.6.37</title>
<orderedlist>
<listitem>
<para>Remove the vtx (videotext/teletext) API. This API was no longer
used and no hardware exists to verify the API. Nor were any userspace applications found
that used it. It was originally scheduled for removal in 2.6.35.
</para>
</listitem>
</orderedlist>
</section>
<section id="other">
<title>Relation of V4L2 to other Linux multimedia APIs</title>

12
Documentation/DocBook/v4l/controls.xml
Просмотреть файл

@ -311,11 +311,18 @@ minimum value disables backlight compensation.</entry>
bits 8-15 Green color information, bits 16-23 Blue color
information and bits 24-31 must be zero.</entry>
</row>
<row>
<entry><constant>V4L2_CID_ILLUMINATORS_1</constant>
<constant>V4L2_CID_ILLUMINATORS_2</constant></entry>
<entry>boolean</entry>
<entry>Switch on or off the illuminator 1 or 2 of the device
(usually a microscope).</entry>
</row>
<row>
<entry><constant>V4L2_CID_LASTP1</constant></entry>
<entry></entry>
<entry>End of the predefined control IDs (currently
<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry>
<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry>
</row>
<row>
<entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
@ -357,9 +364,6 @@ enumerate_menu (void)
querymenu.index++) {
if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &amp;querymenu)) {
printf (" %s\n", querymenu.name);
} else {
perror ("VIDIOC_QUERYMENU");
exit (EXIT_FAILURE);
}
}
}

68
Documentation/DocBook/v4l/dev-rds.xml
Просмотреть файл

@ -3,15 +3,16 @@
<para>The Radio Data System transmits supplementary
information in binary format, for example the station name or travel
information, on an inaudible audio subcarrier of a radio program. This
interface is aimed at devices capable of receiving and decoding RDS
interface is aimed at devices capable of receiving and/or transmitting RDS
information.</para>
<para>For more information see the core RDS standard <xref linkend="en50067" />
and the RBDS standard <xref linkend="nrsc4" />.</para>
<para>Note that the RBDS standard as is used in the USA is almost identical
to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields
have slightly different meanings. See the RBDS standard for more information.</para>
to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the
fields have slightly different meanings. See the RBDS standard for more
information.</para>
<para>The RBDS standard also specifies support for MMBS (Modified Mobile Search).
This is a proprietary format which seems to be discontinued. The RDS interface does not
@ -21,16 +22,25 @@ be needed, then please contact the linux-media mailing list: &v4l-ml;.</para>
<section>
<title>Querying Capabilities</title>
<para>Devices supporting the RDS capturing API
set the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in
<para>Devices supporting the RDS capturing API set
the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in
the <structfield>capabilities</structfield> field of &v4l2-capability;
returned by the &VIDIOC-QUERYCAP; ioctl.
Any tuner that supports RDS will set the
<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
field of &v4l2-tuner;.
Whether an RDS signal is present can be detected by looking at
the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the
<constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para>
returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS
will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in
the <structfield>capability</structfield> field of &v4l2-tuner;. If
the driver only passes RDS blocks without interpreting the data
the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be
set, see <link linkend="reading-rds-data">Reading RDS data</link>.
For future use the
flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been
defined. However, a driver for a radio tuner with this capability does
not yet exist, so if you are planning to write such a driver you
should discuss this on the linux-media mailing list: &v4l-ml;.</para>
<para> Whether an RDS signal is present can be detected by looking
at the <structfield>rxsubchans</structfield> field of &v4l2-tuner;:
the <constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data
was detected.</para>
<para>Devices supporting the RDS output API
set the <constant>V4L2_CAP_RDS_OUTPUT</constant> flag in
@ -40,16 +50,31 @@ Any modulator that supports RDS will set the
<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield>
field of &v4l2-modulator;.
In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant>
bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para>
bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.
If the driver only passes RDS blocks without interpreting the data
the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the
tuner is capable of handling RDS entities like program identification codes and radio
text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set,
see <link linkend="writing-rds-data">Writing RDS data</link> and
<link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para>
</section>
<section>
<section id="reading-rds-data">
<title>Reading RDS data</title>
<para>RDS data can be read from the radio device
with the &func-read; function. The data is packed in groups of three bytes,
with the &func-read; function. The data is packed in groups of three bytes.</para>
</section>
<section id="writing-rds-data">
<title>Writing RDS data</title>
<para>RDS data can be written to the radio device
with the &func-write; function. The data is packed in groups of three bytes,
as follows:</para>
</section>
<section>
<table frame="none" pgwide="1" id="v4l2-rds-data">
<title>struct
<structname>v4l2_rds_data</structname></title>
@ -111,48 +136,57 @@ as follows:</para>
<tbody valign="top">
<row>
<entry>V4L2_RDS_BLOCK_MSK</entry>
<entry> </entry>
<entry>7</entry>
<entry>Mask for bits 0-2 to get the block ID.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_A</entry>
<entry> </entry>
<entry>0</entry>
<entry>Block A.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_B</entry>
<entry> </entry>
<entry>1</entry>
<entry>Block B.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_C</entry>
<entry> </entry>
<entry>2</entry>
<entry>Block C.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_D</entry>
<entry> </entry>
<entry>3</entry>
<entry>Block D.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_C_ALT</entry>
<entry> </entry>
<entry>4</entry>
<entry>Block C'.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_INVALID</entry>
<entry>read-only</entry>
<entry>7</entry>
<entry>An invalid block.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_CORRECTED</entry>
<entry>read-only</entry>
<entry>0x40</entry>
<entry>A bit error was detected but corrected.</entry>
</row>
<row>
<entry>V4L2_RDS_BLOCK_ERROR</entry>
<entry>read-only</entry>
<entry>0x80</entry>
<entry>An incorrectable error occurred.</entry>
<entry>An uncorrectable error occurred.</entry>
</row>
</tbody>
</tgroup>

29
Documentation/DocBook/v4l/dev-teletext.xml
Просмотреть файл

@ -1,35 +1,32 @@
<title>Teletext Interface</title>
<para>This interface aims at devices receiving and demodulating
<para>This interface was aimed at devices receiving and demodulating
Teletext data [<xref linkend="ets300706" />, <xref linkend="itu653" />], evaluating the
Teletext packages and storing formatted pages in cache memory. Such
devices are usually implemented as microcontrollers with serial
interface (I<superscript>2</superscript>C) and can be found on older
interface (I<superscript>2</superscript>C) and could be found on old
TV cards, dedicated Teletext decoding cards and home-brew devices
connected to the PC parallel port.</para>
<para>The Teletext API was designed by Martin Buck. It is defined in
<para>The Teletext API was designed by Martin Buck. It was defined in
the kernel header file <filename>linux/videotext.h</filename>, the
specification is available from <ulink url="ftp://ftp.gwdg.de/pub/linux/misc/videotext/">
ftp://ftp.gwdg.de/pub/linux/misc/videotext/</ulink>. (Videotext is the name of
the German public television Teletext service.) Conventional character
device file names are <filename>/dev/vtx</filename> and
<filename>/dev/vttuner</filename>, with device number 83, 0 and 83, 16
respectively. A similar interface exists for the Philips SAA5249
Teletext decoder [specification?] with character device file names
<filename>/dev/tlkN</filename>, device number 102, N.</para>
the German public television Teletext service.)</para>
<para>Eventually the Teletext API was integrated into the V4L API
with character device file names <filename>/dev/vtx0</filename> to
<filename>/dev/vtx31</filename>, device major number 81, minor numbers
192 to 223. For reference the V4L Teletext API specification is
reproduced here in full: "Teletext interfaces talk the existing VTX
API." Teletext devices with major number 83 and 102 will be removed in
Linux 2.6.</para>
192 to 223.</para>
<para>There are no plans to replace the Teletext API or to integrate
it into V4L2. Please write to the linux-media mailing list: &v4l-ml;
when the need arises.</para>
<para>However, teletext decoders were quickly replaced by more
generic VBI demodulators and those dedicated teletext decoders no longer exist.
For many years the vtx devices were still around, even though nobody used
them. So the decision was made to finally remove support for the Teletext API in
kernel 2.6.37.</para>
<para>Modern devices all use the <link linkend="raw-vbi">raw</link> or
<link linkend="sliced">sliced</link> VBI API.</para>
<!--
Local Variables:

2
Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
Просмотреть файл

@ -739,7 +739,7 @@ defined in error. Drivers may interpret them as in <xref
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
<row id="V4L2-PIX-FMT-BGR666">
<row><!-- id="V4L2-PIX-FMT-BGR666" -->
<entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
<entry>'BGRH'</entry>
<entry></entry>

90
Documentation/DocBook/v4l/pixfmt-srggb10.xml Normal file
Просмотреть файл

@ -0,0 +1,90 @@
<refentry>
<refmeta>
<refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'),
V4L2_PIX_FMT_SGRBG10 ('BA10'),
V4L2_PIX_FMT_SGBRG10 ('GB10'),
V4L2_PIX_FMT_SBGGR10 ('BG10'),
</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname id="V4L2-PIX-FMT-SRGGB10"><constant>V4L2_PIX_FMT_SRGGB10</constant></refname>
<refname id="V4L2-PIX-FMT-SGRBG10"><constant>V4L2_PIX_FMT_SGRBG10</constant></refname>
<refname id="V4L2-PIX-FMT-SGBRG10"><constant>V4L2_PIX_FMT_SGBRG10</constant></refname>
<refname id="V4L2-PIX-FMT-SBGGR10"><constant>V4L2_PIX_FMT_SBGGR10</constant></refname>
<refpurpose>10-bit Bayer formats expanded to 16 bits</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
<para>The following four pixel formats are raw sRGB / Bayer formats with
10 bits per colour. Each colour component is stored in a 16-bit word, with 6
unused high bits filled with zeros. Each n-pixel row contains n/2 green samples
and n/2 blue or red samples, with alternating red and blue rows. Bytes are
stored in memory in little endian order. They are conventionally described
as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of these
formats</para>
<example>
<title><constant>V4L2_PIX_FMT_SBGGR10</constant> 4 &times; 4
pixel image</title>
<formalpara>
<title>Byte Order.</title>
<para>Each cell is one byte, high 6 bits in high bytes are 0.
<informaltable frame="none">
<tgroup cols="5" align="center">
<colspec align="left" colwidth="2*" />
<tbody valign="top">
<row>
<entry>start&nbsp;+&nbsp;0:</entry>
<entry>B<subscript>00low</subscript></entry>
<entry>B<subscript>00high</subscript></entry>
<entry>G<subscript>01low</subscript></entry>
<entry>G<subscript>01high</subscript></entry>
<entry>B<subscript>02low</subscript></entry>
<entry>B<subscript>02high</subscript></entry>
<entry>G<subscript>03low</subscript></entry>
<entry>G<subscript>03high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;8:</entry>
<entry>G<subscript>10low</subscript></entry>
<entry>G<subscript>10high</subscript></entry>
<entry>R<subscript>11low</subscript></entry>
<entry>R<subscript>11high</subscript></entry>
<entry>G<subscript>12low</subscript></entry>
<entry>G<subscript>12high</subscript></entry>
<entry>R<subscript>13low</subscript></entry>
<entry>R<subscript>13high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;16:</entry>
<entry>B<subscript>20low</subscript></entry>
<entry>B<subscript>20high</subscript></entry>
<entry>G<subscript>21low</subscript></entry>
<entry>G<subscript>21high</subscript></entry>
<entry>B<subscript>22low</subscript></entry>
<entry>B<subscript>22high</subscript></entry>
<entry>G<subscript>23low</subscript></entry>
<entry>G<subscript>23high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;24:</entry>
<entry>G<subscript>30low</subscript></entry>
<entry>G<subscript>30high</subscript></entry>
<entry>R<subscript>31low</subscript></entry>
<entry>R<subscript>31high</subscript></entry>
<entry>G<subscript>32low</subscript></entry>
<entry>G<subscript>32high</subscript></entry>
<entry>R<subscript>33low</subscript></entry>
<entry>R<subscript>33high</subscript></entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
</formalpara>
</example>
</refsect1>
</refentry>

67
Documentation/DocBook/v4l/pixfmt-srggb8.xml Normal file
Просмотреть файл

@ -0,0 +1,67 @@
<refentry id="V4L2-PIX-FMT-SRGGB8">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_SRGGB8 ('RGGB')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname><constant>V4L2_PIX_FMT_SRGGB8</constant></refname>
<refpurpose>Bayer RGB format</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
<para>This is commonly the native format of digital cameras,
reflecting the arrangement of sensors on the CCD device. Only one red,
green or blue value is given for each pixel. Missing components must
be interpolated from neighbouring pixels. From left to right the first
row consists of a red and green value, the second row of a green and
blue value. This scheme repeats to the right and down for every two
columns and rows.</para>
<example>
<title><constant>V4L2_PIX_FMT_SRGGB8</constant> 4 &times; 4
pixel image</title>
<formalpara>
<title>Byte Order.</title>
<para>Each cell is one byte.
<informaltable frame="none">
<tgroup cols="5" align="center">
<colspec align="left" colwidth="2*" />
<tbody valign="top">
<row>
<entry>start&nbsp;+&nbsp;0:</entry>
<entry>R<subscript>00</subscript></entry>
<entry>G<subscript>01</subscript></entry>
<entry>R<subscript>02</subscript></entry>
<entry>G<subscript>03</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;4:</entry>
<entry>G<subscript>10</subscript></entry>
<entry>B<subscript>11</subscript></entry>
<entry>G<subscript>12</subscript></entry>
<entry>B<subscript>13</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;8:</entry>
<entry>R<subscript>20</subscript></entry>
<entry>G<subscript>21</subscript></entry>
<entry>R<subscript>22</subscript></entry>
<entry>G<subscript>23</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;12:</entry>
<entry>G<subscript>30</subscript></entry>
<entry>B<subscript>31</subscript></entry>
<entry>G<subscript>32</subscript></entry>
<entry>B<subscript>33</subscript></entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
</formalpara>
</example>
</refsect1>
</refentry>

79
Documentation/DocBook/v4l/pixfmt-y10.xml Normal file
Просмотреть файл

@ -0,0 +1,79 @@
<refentry id="V4L2-PIX-FMT-Y10">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_Y10 ('Y10 ')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
<refname><constant>V4L2_PIX_FMT_Y10</constant></refname>
<refpurpose>Grey-scale image</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
<para>This is a grey-scale image with a depth of 10 bits per pixel. Pixels
are stored in 16-bit words with unused high bits padded with 0. The least
significant byte is stored at lower memory addresses (little-endian).</para>
<example>
<title><constant>V4L2_PIX_FMT_Y10</constant> 4 &times; 4
pixel image</title>
<formalpara>
<title>Byte Order.</title>
<para>Each cell is one byte.
<informaltable frame="none">
<tgroup cols="9" align="center">
<colspec align="left" colwidth="2*" />
<tbody valign="top">
<row>
<entry>start&nbsp;+&nbsp;0:</entry>
<entry>Y'<subscript>00low</subscript></entry>
<entry>Y'<subscript>00high</subscript></entry>
<entry>Y'<subscript>01low</subscript></entry>
<entry>Y'<subscript>01high</subscript></entry>
<entry>Y'<subscript>02low</subscript></entry>
<entry>Y'<subscript>02high</subscript></entry>
<entry>Y'<subscript>03low</subscript></entry>
<entry>Y'<subscript>03high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;8:</entry>
<entry>Y'<subscript>10low</subscript></entry>
<entry>Y'<subscript>10high</subscript></entry>
<entry>Y'<subscript>11low</subscript></entry>
<entry>Y'<subscript>11high</subscript></entry>
<entry>Y'<subscript>12low</subscript></entry>
<entry>Y'<subscript>12high</subscript></entry>
<entry>Y'<subscript>13low</subscript></entry>
<entry>Y'<subscript>13high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;16:</entry>
<entry>Y'<subscript>20low</subscript></entry>
<entry>Y'<subscript>20high</subscript></entry>
<entry>Y'<subscript>21low</subscript></entry>
<entry>Y'<subscript>21high</subscript></entry>
<entry>Y'<subscript>22low</subscript></entry>
<entry>Y'<subscript>22high</subscript></entry>
<entry>Y'<subscript>23low</subscript></entry>
<entry>Y'<subscript>23high</subscript></entry>
</row>
<row>
<entry>start&nbsp;+&nbsp;24:</entry>
<entry>Y'<subscript>30low</subscript></entry>
<entry>Y'<subscript>30high</subscript></entry>
<entry>Y'<subscript>31low</subscript></entry>
<entry>Y'<subscript>31high</subscript></entry>
<entry>Y'<subscript>32low</subscript></entry>
<entry>Y'<subscript>32high</subscript></entry>
<entry>Y'<subscript>33low</subscript></entry>
<entry>Y'<subscript>33high</subscript></entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
</formalpara>
</example>
</refsect1>
</refentry>

32
Documentation/DocBook/v4l/pixfmt.xml
Просмотреть файл

@ -566,7 +566,9 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.<
&sub-sbggr8;
&sub-sgbrg8;
&sub-sgrbg8;
&sub-srggb8;
&sub-sbggr16;
&sub-srggb10;
</section>
<section id="yuv-formats">
@ -589,6 +591,7 @@ information.</para>
&sub-packed-yuv;
&sub-grey;
&sub-y10;
&sub-y16;
&sub-yuyv;
&sub-uyvy;
@ -685,6 +688,11 @@ http://www.ivtvdriver.org/</ulink></para><para>The format is documented in the
kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm12</filename>
</para></entry>
</row>
<row id="V4L2-PIX-FMT-CPIA1">
<entry><constant>V4L2_PIX_FMT_CPIA1</constant></entry>
<entry>'CPIA'</entry>
<entry>YUV format used by the gspca cpia1 driver.</entry>
</row>
<row id="V4L2-PIX-FMT-SPCA501">
<entry><constant>V4L2_PIX_FMT_SPCA501</constant></entry>
<entry>'S501'</entry>
@ -705,11 +713,6 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
<entry>'S561'</entry>
<entry>Compressed GBRG Bayer format used by the gspca driver.</entry>
</row>
<row id="V4L2-PIX-FMT-SGRBG10">
<entry><constant>V4L2_PIX_FMT_SGRBG10</constant></entry>
<entry>'DA10'</entry>
<entry>10 bit raw Bayer, expanded to 16 bits.</entry>
</row>
<row id="V4L2-PIX-FMT-SGRBG10DPCM8">
<entry><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></entry>
<entry>'DB10'</entry>
@ -770,6 +773,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm
<entry>'S920'</entry>
<entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry>
</row>
<row id="V4L2-PIX-FMT-SN9C2028">
<entry><constant>V4L2_PIX_FMT_SN9C2028</constant></entry>
<entry>'SONX'</entry>
<entry>Compressed GBRG bayer format of the gspca sn9c2028 driver.</entry>
</row>
<row id="V4L2-PIX-FMT-STV0680">
<entry><constant>V4L2_PIX_FMT_STV0680</constant></entry>
<entry>'S680'</entry>
@ -787,6 +795,20 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
<entry>'TM60'</entry>
<entry><para>Used by Trident tm6000</para></entry>
</row>
<row id="V4L2-PIX-FMT-CIT-YYVYUY">
<entry><constant>V4L2_PIX_FMT_CIT_YYVYUY</constant></entry>
<entry>'CITV'</entry>
<entry><para>Used by xirlink CIT, found at IBM webcams.</para>
<para>Uses one line of Y then 1 line of VYUY</para>
</entry>
</row>
<row id="V4L2-PIX-FMT-KONICA420">
<entry><constant>V4L2_PIX_FMT_KONICA420</constant></entry>
<entry>'KONI'</entry>
<entry><para>Used by Konica webcams.</para>
<para>YUV420 planar in blocks of 256 pixels.</para>
</entry>
</row>
<row id="V4L2-PIX-FMT-YYUV">
<entry><constant>V4L2_PIX_FMT_YYUV</constant></entry>
<entry>'YYUV'</entry>

10
Documentation/DocBook/v4l/v4l2.xml
Просмотреть файл

@ -99,6 +99,7 @@ Remote Controller chapter.</contrib>
<year>2007</year>
<year>2008</year>
<year>2009</year>
<year>2010</year>
<holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
</copyright>
@ -110,9 +111,16 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder>
<!-- Put document revisions here, newest first. -->
<!-- API revisions (changes and additions of defines, enums,
structs, ioctls) must be noted in more detail in the history chapter
(compat.sgml), along with the possible impact on existing drivers and
(compat.xml), along with the possible impact on existing drivers and
applications. -->
<revision>
<revnumber>2.6.37</revnumber>
<date>2010-08-06</date>
<authorinitials>hv</authorinitials>
<revremark>Removed obsolete vtx (videotext) API.</revremark>
</revision>
<revision>
<revnumber>2.6.33</revnumber>
<date>2009-12-03</date>

106
Documentation/DocBook/v4l/videodev2.h.xml
Просмотреть файл

@ -154,23 +154,13 @@ enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> {
V4L2_BUF_TYPE_VBI_OUTPUT = 5,
V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6,
V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7,
#if 1 /*KEEP*/
#if 1
/* Experimental */
V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8,
#endif
V4L2_BUF_TYPE_PRIVATE = 0x80,
};
enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> {
V4L2_CTRL_TYPE_INTEGER = 1,
V4L2_CTRL_TYPE_BOOLEAN = 2,
V4L2_CTRL_TYPE_MENU = 3,
V4L2_CTRL_TYPE_BUTTON = 4,
V4L2_CTRL_TYPE_INTEGER64 = 5,
V4L2_CTRL_TYPE_CTRL_CLASS = 6,
V4L2_CTRL_TYPE_STRING = 7,
};
enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> {
V4L2_TUNER_RADIO = 1,
V4L2_TUNER_ANALOG_TV = 2,
@ -288,6 +278,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
#define <link linkend="V4L2-PIX-FMT-RGB565">V4L2_PIX_FMT_RGB565</link> v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */
#define <link linkend="V4L2-PIX-FMT-RGB555X">V4L2_PIX_FMT_RGB555X</link> v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */
#define <link linkend="V4L2-PIX-FMT-RGB565X">V4L2_PIX_FMT_RGB565X</link> v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */
#define <link linkend="V4L2-PIX-FMT-BGR666">V4L2_PIX_FMT_BGR666</link> v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */
#define <link linkend="V4L2-PIX-FMT-BGR24">V4L2_PIX_FMT_BGR24</link> v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */
#define <link linkend="V4L2-PIX-FMT-RGB24">V4L2_PIX_FMT_RGB24</link> v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */
#define <link linkend="V4L2-PIX-FMT-BGR32">V4L2_PIX_FMT_BGR32</link> v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */
@ -295,6 +286,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
/* Grey formats */
#define <link linkend="V4L2-PIX-FMT-GREY">V4L2_PIX_FMT_GREY</link> v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */
#define <link linkend="V4L2-PIX-FMT-Y4">V4L2_PIX_FMT_Y4</link> v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */
#define <link linkend="V4L2-PIX-FMT-Y6">V4L2_PIX_FMT_Y6</link> v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */
#define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link> v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */
#define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link> v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */
/* Palette formats */
@ -330,7 +324,11 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
#define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link> v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */
#define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link> v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */
#define <link linkend="V4L2-PIX-FMT-SGRBG8">V4L2_PIX_FMT_SGRBG8</link> v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */
#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */
#define <link linkend="V4L2-PIX-FMT-SRGGB8">V4L2_PIX_FMT_SRGGB8</link> v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */
#define <link linkend="V4L2-PIX-FMT-SBGGR10">V4L2_PIX_FMT_SBGGR10</link> v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */
#define <link linkend="V4L2-PIX-FMT-SGBRG10">V4L2_PIX_FMT_SGBRG10</link> v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */
#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */
#define <link linkend="V4L2-PIX-FMT-SRGGB10">V4L2_PIX_FMT_SRGGB10</link> v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */
/* 10bit raw bayer DPCM compressed to 8 bits */
#define <link linkend="V4L2-PIX-FMT-SGRBG10DPCM8">V4L2_PIX_FMT_SGRBG10DPCM8</link> v4l2_fourcc('B', 'D', '1', '0')
/*
@ -346,6 +344,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
#define <link linkend="V4L2-PIX-FMT-MPEG">V4L2_PIX_FMT_MPEG</link> v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */
/* Vendor-specific formats */
#define <link linkend="V4L2-PIX-FMT-CPIA1">V4L2_PIX_FMT_CPIA1</link> v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */
#define <link linkend="V4L2-PIX-FMT-WNVA">V4L2_PIX_FMT_WNVA</link> v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
#define <link linkend="V4L2-PIX-FMT-SN9C10X">V4L2_PIX_FMT_SN9C10X</link> v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
#define <link linkend="V4L2-PIX-FMT-SN9C20X-I420">V4L2_PIX_FMT_SN9C20X_I420</link> v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
@ -358,12 +357,15 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> {
#define <link linkend="V4L2-PIX-FMT-SPCA561">V4L2_PIX_FMT_SPCA561</link> v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
#define <link linkend="V4L2-PIX-FMT-PAC207">V4L2_PIX_FMT_PAC207</link> v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
#define <link linkend="V4L2-PIX-FMT-MR97310A">V4L2_PIX_FMT_MR97310A</link> v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */
#define <link linkend="V4L2-PIX-FMT-SN9C2028">V4L2_PIX_FMT_SN9C2028</link> v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */
#define <link linkend="V4L2-PIX-FMT-SQ905C">V4L2_PIX_FMT_SQ905C</link> v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */
#define <link linkend="V4L2-PIX-FMT-PJPG">V4L2_PIX_FMT_PJPG</link> v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
#define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link> v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
#define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link> v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
#define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link> v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
#define <link linkend="V4L2-PIX-FMT-CIT-YYVYUY">V4L2_PIX_FMT_CIT_YYVYUY</link> v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */
#define <link linkend="V4L2-PIX-FMT-KONICA420">V4L2_PIX_FMT_KONICA420</link> v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */
/*
* F O R M A T E N U M E R A T I O N
@ -380,7 +382,7 @@ struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link> {
#define V4L2_FMT_FLAG_COMPRESSED 0x0001
#define V4L2_FMT_FLAG_EMULATED 0x0002
#if 1 /*KEEP*/
#if 1
/* Experimental Frame Size and frame rate enumeration */
/*
* F R A M E S I Z E E N U M E R A T I O N
@ -544,6 +546,8 @@ struct <link linkend="v4l2-buffer">v4l2_buffer</link> {
#define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */
#define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */
#define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */
/* Buffer is ready, but the data contained within is corrupted. */
#define V4L2_BUF_FLAG_ERROR 0x0040
#define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */
#define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */
@ -934,6 +938,16 @@ struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link> {
#define V4L2_CTRL_ID2CLASS(id) ((id) &amp; 0x0fff0000UL)
#define V4L2_CTRL_DRIVER_PRIV(id) (((id) &amp; 0xffff) &gt;= 0x1000)
enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> {
V4L2_CTRL_TYPE_INTEGER = 1,
V4L2_CTRL_TYPE_BOOLEAN = 2,
V4L2_CTRL_TYPE_MENU = 3,
V4L2_CTRL_TYPE_BUTTON = 4,
V4L2_CTRL_TYPE_INTEGER64 = 5,
V4L2_CTRL_TYPE_CTRL_CLASS = 6,
V4L2_CTRL_TYPE_STRING = 7,
};
/* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */
struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link> {
__u32 id;
@ -1018,21 +1032,27 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> {
V4L2_COLORFX_NONE = 0,
V4L2_COLORFX_BW = 1,
V4L2_COLORFX_SEPIA = 2,
V4L2_COLORFX_NEGATIVE = 3,
V4L2_COLORFX_EMBOSS = 4,
V4L2_COLORFX_SKETCH = 5,
V4L2_COLORFX_SKY_BLUE = 6,
V4L2_COLORFX_NEGATIVE = 3,
V4L2_COLORFX_EMBOSS = 4,
V4L2_COLORFX_SKETCH = 5,
V4L2_COLORFX_SKY_BLUE = 6,
V4L2_COLORFX_GRASS_GREEN = 7,
V4L2_COLORFX_SKIN_WHITEN = 8,
V4L2_COLORFX_VIVID = 9.
V4L2_COLORFX_VIVID = 9,
};
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
#define V4L2_CID_ROTATE (V4L2_CID_BASE+34)
#define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35)
#define V4L2_CID_CHROMA_GAIN (V4L2_CID_BASE+36)
#define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37)
#define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38)
/* last CID + 1 */
#define V4L2_CID_LASTP1 (V4L2_CID_BASE+36)
#define V4L2_CID_LASTP1 (V4L2_CID_BASE+39)
/* MPEG-class control IDs defined by V4L2 */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
@ -1349,6 +1369,8 @@ struct <link linkend="v4l2-modulator">v4l2_modulator</link> {
#define V4L2_TUNER_CAP_SAP 0x0020
#define V4L2_TUNER_CAP_LANG1 0x0040
#define V4L2_TUNER_CAP_RDS 0x0080
#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100
#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200
/* Flags for the 'rxsubchans' field */
#define V4L2_TUNER_SUB_MONO 0x0001
@ -1378,7 +1400,8 @@ struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link> {
enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> type;
__u32 seek_upward;
__u32 wrap_around;
__u32 reserved[8];
__u32 spacing;
__u32 reserved[7];
};
/*
@ -1433,7 +1456,7 @@ struct <link linkend="v4l2-audioout">v4l2_audioout</link> {
*
* NOTE: EXPERIMENTAL API
*/
#if 1 /*KEEP*/
#if 1
#define V4L2_ENC_IDX_FRAME_I (0)
#define V4L2_ENC_IDX_FRAME_P (1)
#define V4L2_ENC_IDX_FRAME_B (2)
@ -1625,6 +1648,38 @@ struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> {
} parm;
};
/*
* E V E N T S
*/
#define V4L2_EVENT_ALL 0
#define V4L2_EVENT_VSYNC 1
#define V4L2_EVENT_EOS 2
#define V4L2_EVENT_PRIVATE_START 0x08000000
/* Payload for V4L2_EVENT_VSYNC */
struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> {
/* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */
__u8 field;
} __attribute__ ((packed));
struct <link linkend="v4l2-event">v4l2_event</link> {
__u32 type;
union {
struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> vsync;
__u8 data[64];
} u;
__u32 pending;
__u32 sequence;
struct timespec timestamp;
__u32 reserved[9];
};
struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link> {
__u32 type;
__u32 reserved[7];
};
/*
* A D V A N C E D D E B U G G I N G
*
@ -1720,7 +1775,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
#define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
#define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
#define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>)
#if 1 /*KEEP*/
#if 1
#define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link>)
#define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link>)
#define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link>)
@ -1728,7 +1783,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
#define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>)
#endif
#if 1 /*KEEP*/
#if 1
/* Experimental, meant for debugging, testing and internal use.
Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined.
You must be root to use these ioctls. Never use these in applications! */
@ -1747,6 +1802,9 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> {
#define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>)
#define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
#define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>)
#define VIDIOC_DQEVENT _IOR('V', 89, struct <link linkend="v4l2-event">v4l2_event</link>)
#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>)
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */

3
Documentation/DocBook/v4l/vidioc-g-dv-preset.xml
Просмотреть файл

@ -16,8 +16,7 @@
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-preset;
*<parameter>argp</parameter></paramdef>
<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>

3
Documentation/DocBook/v4l/vidioc-g-dv-timings.xml
Просмотреть файл

@ -16,8 +16,7 @@
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-timings;
*<parameter>argp</parameter></paramdef>
<paramdef>struct v4l2_dv_timings *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>

2
Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
Просмотреть файл

@ -16,7 +16,7 @@ input</refpurpose>
<funcdef>int <function>ioctl</function></funcdef>
<paramdef>int <parameter>fd</parameter></paramdef>
<paramdef>int <parameter>request</parameter></paramdef>
<paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef>
<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>

7
Documentation/DocBook/v4l/vidioc-querycap.xml
Просмотреть файл

@ -184,7 +184,7 @@ data.</entry>
<row>
<entry><constant>V4L2_CAP_RDS_CAPTURE</constant></entry>
<entry>0x00000100</entry>
<entry>The device supports the <link linkend="rds">RDS</link> interface.</entry>
<entry>The device supports the <link linkend="rds">RDS</link> capture interface.</entry>
</row>
<row>
<entry><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant></entry>
@ -205,6 +205,11 @@ driver capabilities.</para></footnote></entry>
<entry>The device supports the &VIDIOC-S-HW-FREQ-SEEK; ioctl for
hardware frequency seeking.</entry>
</row>
<row>
<entry><constant>V4L2_CAP_RDS_OUTPUT</constant></entry>
<entry>0x00000800</entry>
<entry>The device supports the <link linkend="rds">RDS</link> output interface.</entry>
</row>
<row>
<entry><constant>V4L2_CAP_TUNER</constant></entry>
<entry>0x00010000</entry>

18
Documentation/DocBook/v4l/vidioc-queryctrl.xml
Просмотреть файл

@ -103,8 +103,12 @@ structure. The driver fills the rest of the structure or returns an
<structfield>index</structfield> is invalid. Menu items are enumerated
by calling <constant>VIDIOC_QUERYMENU</constant> with successive
<structfield>index</structfield> values from &v4l2-queryctrl;
<structfield>minimum</structfield> (0) to
<structfield>maximum</structfield>, inclusive.</para>
<structfield>minimum</structfield> to
<structfield>maximum</structfield>, inclusive. Note that it is possible
for <constant>VIDIOC_QUERYMENU</constant> to return an &EINVAL; for some
indices between <structfield>minimum</structfield> and <structfield>maximum</structfield>.
In that case that particular menu item is not supported by this driver. Also note that
the <structfield>minimum</structfield> value is not necessarily 0.</para>
<para>See also the examples in <xref linkend="control" />.</para>
@ -139,7 +143,7 @@ string. This information is intended for the user.</entry>
<entry><structfield>minimum</structfield></entry>
<entry>Minimum value, inclusive. This field gives a lower
bound for <constant>V4L2_CTRL_TYPE_INTEGER</constant> controls and the
lowest valid index (always 0) for <constant>V4L2_CTRL_TYPE_MENU</constant> controls.
lowest valid index for <constant>V4L2_CTRL_TYPE_MENU</constant> controls.
For <constant>V4L2_CTRL_TYPE_STRING</constant> controls the minimum value
gives the minimum length of the string. This length <emphasis>does not include the terminating
zero</emphasis>. It may not be valid for any other type of control, including
@ -279,7 +283,7 @@ values which are actually different on the hardware.</entry>
</row>
<row>
<entry><constant>V4L2_CTRL_TYPE_MENU</constant></entry>
<entry>0</entry>
<entry>&ge; 0</entry>
<entry>1</entry>
<entry>N-1</entry>
<entry>The control has a menu of N choices. The names of
@ -405,8 +409,10 @@ writing a value will cause the device to carry out a given action
<term><errorcode>EINVAL</errorcode></term>
<listitem>
<para>The &v4l2-queryctrl; <structfield>id</structfield>
is invalid. The &v4l2-querymenu; <structfield>id</structfield> or
<structfield>index</structfield> is invalid.</para>
is invalid. The &v4l2-querymenu; <structfield>id</structfield> is
invalid or <structfield>index</structfield> is out of range (less than
<structfield>minimum</structfield> or greater than <structfield>maximum</structfield>)
or this particular menu item is not supported by the driver.</para>
</listitem>
</varlistentry>
<varlistentry>

10
Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml
Просмотреть файл

@ -51,7 +51,8 @@
<para>Start a hardware frequency seek from the current frequency.
To do this applications initialize the <structfield>tuner</structfield>,
<structfield>type</structfield>, <structfield>seek_upward</structfield> and
<structfield>type</structfield>, <structfield>seek_upward</structfield>,
<structfield>spacing</structfield> and
<structfield>wrap_around</structfield> fields, and zero out the
<structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and
call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer
@ -89,7 +90,12 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[8]</entry>
<entry><structfield>spacing</structfield></entry>
<entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry>
</row>
<row>
<entry>__u32</entry>
<entry><structfield>reserved</structfield>[7]</entry>
<entry>Reserved for future extensions. Drivers and
applications must set the array to zero.</entry>
</row>

38
Documentation/accounting/getdelays.c
Просмотреть файл

@ -21,6 +21,7 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include <signal.h>
#include <linux/genetlink.h>
@ -266,11 +267,13 @@ int main(int argc, char *argv[])
int containerset = 0;
char containerpath[1024];
int cfd = 0;
int forking = 0;
sigset_t sigset;
struct msgtemplate msg;
while (1) {
c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:");
while (!forking) {
c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:c:");
if (c < 0)
break;
@ -319,6 +322,28 @@ int main(int argc, char *argv[])
err(1, "Invalid pid\n");
cmd_type = TASKSTATS_CMD_ATTR_PID;
break;
case 'c':
/* Block SIGCHLD for sigwait() later */
if (sigemptyset(&sigset) == -1)
err(1, "Failed to empty sigset");
if (sigaddset(&sigset, SIGCHLD))
err(1, "Failed to set sigchld in sigset");
sigprocmask(SIG_BLOCK, &sigset, NULL);
/* fork/exec a child */
tid = fork();
if (tid < 0)
err(1, "Fork failed\n");
if (tid == 0)
if (execvp(argv[optind - 1],
&argv[optind - 1]) < 0)
exit(-1);
/* Set the command type and avoid further processing */
cmd_type = TASKSTATS_CMD_ATTR_PID;
forking = 1;
break;
case 'v':
printf("debug on\n");
dbg = 1;
@ -370,6 +395,15 @@ int main(int argc, char *argv[])
goto err;
}
/*
* If we forked a child, wait for it to exit. Cannot use waitpid()
* as all the delicious data would be reaped as part of the wait
*/
if (tid && forking) {
int sig_received;
sigwait(&sigset, &sig_received);
}
if (tid) {
rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
cmd_type, &tid, sizeof(__u32));

8
Documentation/block/switching-sched.txt
Просмотреть файл

@ -16,7 +16,7 @@ you can do so by typing:
As of the Linux 2.6.10 kernel, it is now possible to change the
IO scheduler for a given block device on the fly (thus making it possible,
for instance, to set the CFQ scheduler for the system default, but
set a specific device to use the anticipatory or noop schedulers - which
set a specific device to use the deadline or noop schedulers - which
can improve that device's throughput).
To set a specific scheduler, simply do this:
@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
will be displayed, with the currently selected scheduler in brackets:
# cat /sys/block/hda/queue/scheduler
noop anticipatory deadline [cfq]
# echo anticipatory > /sys/block/hda/queue/scheduler
noop deadline [cfq]
# echo deadline > /sys/block/hda/queue/scheduler
# cat /sys/block/hda/queue/scheduler
noop [anticipatory] deadline cfq
noop [deadline] cfq

14
Documentation/cgroups/cgroups.txt
Просмотреть файл

@ -18,7 +18,8 @@ CONTENTS:
1.2 Why are cgroups needed ?
1.3 How are cgroups implemented ?
1.4 What does notify_on_release do ?
1.5 How do I use cgroups ?
1.5 What does clone_children do ?
1.6 How do I use cgroups ?
2. Usage Examples and Syntax
2.1 Basic Usage
2.2 Attaching processes
@ -293,7 +294,16 @@ notify_on_release in the root cgroup at system boot is disabled
value of their parents notify_on_release setting. The default value of
a cgroup hierarchy's release_agent path is empty.
1.5 How do I use cgroups ?
1.5 What does clone_children do ?
---------------------------------
If the clone_children flag is enabled (1) in a cgroup, then all
cgroups created beneath will call the post_clone callbacks for each
subsystem of the newly created cgroup. Usually when this callback is
implemented for a subsystem, it copies the values of the parent
subsystem, this is the case for the cpuset.
1.6 How do I use cgroups ?
--------------------------
To start a new job that is to be contained within a cgroup, using

50
Documentation/coccinelle.txt
Просмотреть файл

@ -24,6 +24,9 @@ of many distributions, e.g. :
You can get the latest version released from the Coccinelle homepage at
http://coccinelle.lip6.fr/
Information and tips about Coccinelle are also provided on the wiki
pages at http://cocci.ekstranet.diku.dk/wiki/doku.php
Once you have it, run the following command:
./configure
@ -41,20 +44,22 @@ A Coccinelle-specific target is defined in the top level
Makefile. This target is named 'coccicheck' and calls the 'coccicheck'
front-end in the 'scripts' directory.
Four modes are defined: report, patch, context, and org. The mode to
Four modes are defined: patch, report, context, and org. The mode to
use is specified by setting the MODE variable with 'MODE=<mode>'.
'patch' proposes a fix, when possible.
'report' generates a list in the following format:
file:line:column-column: message
'patch' proposes a fix, when possible.
'context' highlights lines of interest and their context in a
diff-like style.Lines of interest are indicated with '-'.
'org' generates a report in the Org mode format of Emacs.
Note that not all semantic patches implement all modes.
Note that not all semantic patches implement all modes. For easy use
of Coccinelle, the default mode is "chain" which tries the previous
modes in the order above until one succeeds.
To make a report for every semantic patch, run the following command:
@ -68,9 +73,9 @@ To produce patches, run:
The coccicheck target applies every semantic patch available in the
subdirectories of 'scripts/coccinelle' to the entire Linux kernel.
sub-directories of 'scripts/coccinelle' to the entire Linux kernel.
For each semantic patch, a changelog message is proposed. It gives a
For each semantic patch, a commit message is proposed. It gives a
description of the problem being checked by the semantic patch, and
includes a reference to Coccinelle.
@ -93,12 +98,35 @@ or
make coccicheck COCCI=<my_SP.cocci> MODE=report
Using Coccinelle on (modified) files
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To apply Coccinelle on a file basis, instead of a directory basis, the
following command may be used:
make C=1 CHECK="scripts/coccicheck"
To check only newly edited code, use the value 2 for the C flag, i.e.
make C=2 CHECK="scripts/coccicheck"
This runs every semantic patch in scripts/coccinelle by default. The
COCCI variable may additionally be used to only apply a single
semantic patch as shown in the previous section.
The "chain" mode is the default. You can select another one with the
MODE variable explained above.
In this mode, there is no information about semantic patches
displayed, and no commit message proposed.
Proposing new semantic patches
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
New semantic patches can be proposed and submitted by kernel
developers. For sake of clarity, they should be organized in the
subdirectories of 'scripts/coccinelle/'.
sub-directories of 'scripts/coccinelle/'.
Detailed description of the 'report' mode
@ -111,7 +139,7 @@ Example:
Running
make coccicheck MODE=report COCCI=scripts/coccinelle/err_cast.cocci
make coccicheck MODE=report COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@ -149,7 +177,7 @@ identified.
Example:
Running
make coccicheck MODE=patch COCCI=scripts/coccinelle/err_cast.cocci
make coccicheck MODE=patch COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@ -193,7 +221,7 @@ NOTE: The diff-like output generated is NOT an applicable patch. The
Example:
Running
make coccicheck MODE=context COCCI=scripts/coccinelle/err_cast.cocci
make coccicheck MODE=context COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.
@ -228,7 +256,7 @@ diff -u -p /home/user/linux/crypto/ctr.c /tmp/nothing
Example:
Running
make coccicheck MODE=org COCCI=scripts/coccinelle/err_cast.cocci
make coccicheck MODE=org COCCI=scripts/coccinelle/api/err_cast.cocci
will execute the following part of the SmPL script.

9
Documentation/devices.txt
Просмотреть файл

@ -1496,9 +1496,6 @@ Your cooperation is appreciated.
64 = /dev/radio0 Radio device
...
127 = /dev/radio63 Radio device
192 = /dev/vtx0 Teletext device
...
223 = /dev/vtx31 Teletext device
224 = /dev/vbi0 Vertical blank interrupt
...
255 = /dev/vbi31 Vertical blank interrupt
@ -2520,6 +2517,12 @@ Your cooperation is appreciated.
8 = /dev/mmcblk1 Second SD/MMC card
...
The start of next SD/MMC card can be configured with
CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe
time using the mmcblk.perdev_minors option. That would
bump the offset between each card to be the configured
value instead of the default 8.
179 char CCube DVXChip-based PCI products
0 = /dev/dvxirq0 First DVX device
1 = /dev/dvxirq1 Second DVX device

46
Documentation/dvb/get_dvb_firmware
Просмотреть файл

@ -26,7 +26,8 @@ use IO::Handle;
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
"af9015", "ngene", "az6027");
"af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395",
"lme2510c_s7395_old");
# Check args
syntax() if (scalar(@ARGV) != 1);
@ -584,6 +585,49 @@ sub az6027{
$firmware;
}
sub lme2510_lg {
my $sourcefile = "LMEBDA_DVBS.sys";
my $hash = "fc6017ad01e79890a97ec53bea157ed2";
my $outfile = "dvb-usb-lme2510-lg.fw";
my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad";
checkstandard();
verify($sourcefile, $hash);
extract($sourcefile, 4168, 3841, $outfile);
verify($outfile, $hasho);
$outfile;
}
sub lme2510c_s7395 {
my $sourcefile = "US2A0D.sys";
my $hash = "b0155a8083fb822a3bd47bc360e74601";
my $outfile = "dvb-usb-lme2510c-s7395.fw";
my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf";
checkstandard();
verify($sourcefile, $hash);
extract($sourcefile, 37248, 3720, $outfile);
verify($outfile, $hasho);
$outfile;
}
sub lme2510c_s7395_old {
my $sourcefile = "LMEBDA_DVBS7395C.sys";
my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31";
my $outfile = "dvb-usb-lme2510c-s7395.fw";
my $hasho = "90430c5b435eb5c6f88fd44a9d950674";
checkstandard();
verify($sourcefile, $hash);
extract($sourcefile, 4208, 3881, $outfile);
verify($outfile, $hasho);
$outfile;
}
# ---------------------------------------------------------------
# Utilities

58
Documentation/dvb/lmedm04.txt Normal file
Просмотреть файл

@ -0,0 +1,58 @@
To extract firmware for the DM04/QQBOX you need to copy the
following file(s) to this directory.
for DM04+/QQBOX LME2510C (Sharp 7395 Tuner)
-------------------------------------------
The Sharp 7395 driver can be found in windows/system32/driver
US2A0D.sys (dated 17 Mar 2009)
and run
./get_dvb_firmware lme2510c_s7395
will produce
dvb-usb-lme2510c-s7395.fw
An alternative but older firmware can be found on the driver
disk DVB-S_EN_3.5A in BDADriver/driver
LMEBDA_DVBS7395C.sys (dated 18 Jan 2008)
and run
./get_dvb_firmware lme2510c_s7395_old
will produce
dvb-usb-lme2510c-s7395.fw
--------------------------------------------------------------------
The LG firmware can be found on the driver
disk DM04+_5.1A[LG] in BDADriver/driver
for DM04 LME2510 (LG Tuner)
---------------------------
LMEBDA_DVBS.sys (dated 13 Nov 2007)
and run
./get_dvb_firmware lme2510_lg
will produce
dvb-usb-lme2510-lg.fw
Other LG firmware can be extracted manually from US280D.sys
only found in windows/system32/driver.
dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw
for DM04 LME2510C (LG Tuner)
---------------------------
dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw
---------------------------------------------------------------------
Copy the firmware file(s) to /lib/firmware

48
Documentation/fb/viafb.txt
Просмотреть файл

@ -197,6 +197,54 @@ Notes:
example,
# fbset -depth 16
[Configure viafb via /proc]
---------------------------
The following files exist in /proc/viafb
supported_output_devices
This read-only file contains a full ',' seperated list containing all
output devices that could be available on your platform. It is likely
that not all of those have a connector on your hardware but it should
provide a good starting point to figure out which of those names match
a real connector.
Example:
# cat /proc/viafb/supported_output_devices
iga1/output_devices
iga2/output_devices
These two files are readable and writable. iga1 and iga2 are the two
independent units that produce the screen image. Those images can be
forwarded to one or more output devices. Reading those files is a way
to query which output devices are currently used by an iga.
Example:
# cat /proc/viafb/iga1/output_devices
If there are no output devices printed the output of this iga is lost.
This can happen for example if only one (the other) iga is used.
Writing to these files allows adjusting the output devices during
runtime. One can add new devices, remove existing ones or switch
between igas. Essentially you can write a ',' seperated list of device
names (or a single one) in the same format as the output to those
files. You can add a '+' or '-' as a prefix allowing simple addition
and removal of devices. So a prefix '+' adds the devices from your list
to the already existing ones, '-' removes the listed devices from the
existing ones and if no prefix is given it replaces all existing ones
with the listed ones. If you remove devices they are expected to turn
off. If you add devices that are already part of the other iga they are
removed there and added to the new one.
Examples:
Add CRT as output device to iga1
# echo +CRT > /proc/viafb/iga1/output_devices
Remove (turn off) DVP1 and LVDS1 as output devices of iga2
# echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
Replace all iga1 output devices by CRT
# echo CRT > /proc/viafb/iga1/output_devices
[Bootup with viafb]:
--------------------
Add the following line to your grub.conf:

57
Documentation/feature-removal-schedule.txt
Просмотреть файл

@ -98,7 +98,7 @@ Who: Pavel Machek <pavel@ucw.cz>
---------------------------
What: Video4Linux API 1 ioctls and from Video devices.
When: July 2009
When: kernel 2.6.38
Files: include/linux/videodev.h
Check: include/linux/videodev.h
Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
@ -116,6 +116,21 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
What: Video4Linux obsolete drivers using V4L1 API
When: kernel 2.6.38
Files: drivers/staging/cpia/* drivers/staging/stradis/*
Check: drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c
Why: There are some drivers still using V4L1 API, despite all efforts we've done
to migrate. Those drivers are for obsolete hardware that the old maintainer
didn't care (or not have the hardware anymore), and that no other developer
could find any hardware to buy. They probably have no practical usage today,
and people with such old hardware could probably keep using an older version
of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody
care enough to port and test them with V4L2 API, they'll be removed on 2.6.38.
Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
What: sys_sysctl
When: September 2010
Option: CONFIG_SYSCTL_SYSCALL
@ -470,29 +485,6 @@ When: April 2011
Why: Superseded by xt_CT
Who: Netfilter developer team <netfilter-devel@vger.kernel.org>
---------------------------
What: video4linux /dev/vtx teletext API support
When: 2.6.35
Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
include/linux/videotext.h
Why: The vtx device nodes have been superseded by vbi device nodes
for many years. No applications exist that use the vtx support.
Of the two i2c drivers that actually support this API the saa5249
has been impossible to use for a year now and no known hardware
that supports this device exists. The saa5246a is theoretically
supported by the old mxb boards, but it never actually worked.
In summary: there is no hardware that can use this API and there
are no applications actually implementing this API.
The vtx support still reserves minors 192-223 and we would really
like to reuse those for upcoming new functionality. In the unlikely
event that new hardware appears that wants to use the functionality
provided by the vtx API, then that functionality should be build
around the sliced VBI API instead.
Who: Hans Verkuil <hverkuil@xs4all.nl>
----------------------------
What: IRQF_DISABLED
@ -526,6 +518,23 @@ Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
----------------------------
What: namespace cgroup (ns_cgroup)
When: 2.6.38
Why: The ns_cgroup leads to some problems:
* cgroup creation is out-of-control
* cgroup name can conflict when pids are looping
* it is not possible to have a single process handling
a lot of namespaces without falling in a exponential creation time
* we may want to create a namespace without creating a cgroup
The ns_cgroup is replaced by a compatibility flag 'clone_children',
where a newly created cgroup will copy the parent cgroup values.
The userspace has to manually create a cgroup and add a task to
the 'tasks' file.
Who: Daniel Lezcano <daniel.lezcano@free.fr>
----------------------------
What: iwlwifi disable_hw_scan module parameters
When: 2.6.40
Why: Hareware scan is the prefer method for iwlwifi devices for

2
Documentation/filesystems/00-INDEX
Просмотреть файл

@ -96,8 +96,6 @@ seq_file.txt
- how to use the seq_file API
sharedsubtree.txt
- a description of shared subtrees for namespaces.
smbfs.txt
- info on using filesystems with the SMB protocol (Win 3.11 and NT).
spufs.txt
- info and mount options for the SPU filesystem used on Cell.
sysfs-pci.txt

4
Documentation/filesystems/9p.txt
Просмотреть файл

@ -111,7 +111,7 @@ OPTIONS
This can be used to share devices/named pipes/sockets between
hosts. This functionality will be expanded in later versions.
access there are three access modes.
access there are four access modes.
user = if a user tries to access a file on v9fs
filesystem for the first time, v9fs sends an
attach command (Tattach) for that user.
@ -120,6 +120,8 @@ OPTIONS
the files on the mounted filesystem
any = v9fs does single attach and performs all
operations as one user
client = ACL based access check on the 9p client
side for access validation
cachetag cache tag to use the specified persistent cache.
cache tags for existing cache sessions can be listed at

2
Documentation/filesystems/Locking
Просмотреть файл

@ -322,7 +322,6 @@ fl_release_private: yes yes
prototypes:
int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
void (*fl_notify)(struct file_lock *); /* unblock callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
void (*fl_break)(struct file_lock *); /* break_lease callback */
@ -330,7 +329,6 @@ locking rules:
BKL may block
fl_compare_owner: yes no
fl_notify: yes no
fl_copy_lock: yes no
fl_release_private: yes yes
fl_break: yes no

14
Documentation/filesystems/ext4.txt
Просмотреть файл

@ -353,6 +353,20 @@ noauto_da_alloc replacing existing files via patterns such as
system crashes before the delayed allocation
blocks are forced to disk.
noinit_itable Do not initialize any uninitialized inode table
blocks in the background. This feature may be
used by installation CD's so that the install
process can complete as quickly as possible; the
inode table initialization process would then be
deferred until the next time the file system
is unmounted.
init_itable=n The lazy itable init code will wait n times the
number of milliseconds it took to zero out the
previous block group's inode table. This
minimizes the impact on the systme performance
while file system's inode table is being initialized.
discard Controls whether ext4 should issue discard/TRIM
nodiscard(*) commands to the underlying block device when
blocks are freed. This is useful for SSD devices

17
Documentation/filesystems/proc.txt
Просмотреть файл

@ -136,6 +136,7 @@ Table 1-1: Process specific entries in /proc
statm Process memory status information
status Process status in human readable form
wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
pagemap Page table
stack Report full stack trace, enable via CONFIG_STACKTRACE
smaps a extension based on maps, showing the memory consumption of
each mapping
@ -370,6 +371,7 @@ Shared_Dirty: 0 kB
Private_Clean: 0 kB
Private_Dirty: 0 kB
Referenced: 892 kB
Anonymous: 0 kB
Swap: 0 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
@ -378,9 +380,15 @@ The first of these lines shows the same information as is displayed for the
mapping in /proc/PID/maps. The remaining lines show the size of the mapping
(size), the amount of the mapping that is currently resident in RAM (RSS), the
process' proportional share of this mapping (PSS), the number of clean and
dirty shared pages in the mapping, and the number of clean and dirty private
pages in the mapping. The "Referenced" indicates the amount of memory
currently marked as referenced or accessed.
dirty private pages in the mapping. Note that even a page which is part of a
MAP_SHARED mapping, but has only a single pte mapped, i.e. is currently used
by only one process, is accounted as private and not as shared. "Referenced"
indicates the amount of memory currently marked as referenced or accessed.
"Anonymous" shows the amount of memory that does not belong to any file. Even
a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
and a page is modified, the file page is replaced by a private anonymous copy.
"Swap" shows how much would-be-anonymous memory is also used, but out on
swap.
This file is only present if the CONFIG_MMU kernel configuration option is
enabled.
@ -397,6 +405,9 @@ To clear the bits for the file mapped pages associated with the process
> echo 3 > /proc/PID/clear_refs
Any other value written to /proc/PID/clear_refs will have no effect.
The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
using /proc/kpageflags and number of times a page is mapped using
/proc/kpagecount. For detailed explanation, see Documentation/vm/pagemap.txt.
1.2 Kernel data
---------------

11
Documentation/filesystems/xfs-delayed-logging-design.txt
Просмотреть файл

@ -794,17 +794,6 @@ designed.
Roadmap:
2.6.37 Remove experimental tag from mount option
=> should be roughly 6 months after initial merge
=> enough time to:
=> gain confidence and fix problems reported by early
adopters (a.k.a. guinea pigs)
=> address worst performance regressions and undesired
behaviours
=> start tuning/optimising code for parallelism
=> start tuning/optimising algorithms consuming
excessive CPU time
2.6.39 Switch default mount option to use delayed logging
=> should be roughly 12 months after initial merge
=> enough time to shake out remaining problems before next round of

28
Documentation/hwmon/it87
Просмотреть файл

@ -22,6 +22,10 @@ Supported chips:
Prefix: 'it8720'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* IT8721F/IT8758E
Prefix: 'it8721'
Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Not publicly available
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
@ -67,7 +71,7 @@ Description
-----------
This driver implements support for the IT8705F, IT8712F, IT8716F,
IT8718F, IT8720F, IT8726F and SiS950 chips.
IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
joysticks and other miscellaneous stuff. For hardware monitoring, they
@ -86,14 +90,15 @@ the driver won't notice and report changes in the VID value. The two
upper VID bits share their pins with voltage inputs (in5 and in6) so you
can't have both on a given board.
The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for
2 additional fans. The additional fans are supported by the driver.
The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions
have support for 2 additional fans. The additional fans are supported by the
driver.
The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have
optional 16-bit tachometer counters for fans 1 to 3. This is better (no more
fan clock divider mess) but not compatible with the older chips and
revisions. The 16-bit tachometer mode is enabled by the driver when one
of the above chips is detected.
The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and
IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This
is better (no more fan clock divider mess) but not compatible with the older
chips and revisions. The 16-bit tachometer mode is enabled by the driver when
one of the above chips is detected.
The IT8726F is just bit enhanced IT8716F with additional hardware
for AMD power sequencing. Therefore the chip will appear as IT8716F
@ -115,7 +120,12 @@ alarm is triggered if the voltage has crossed a programmable minimum or
maximum limit. Note that minimum in this case always means 'closest to
zero'; this is important for negative voltage measurements. All voltage
inputs can measure voltages between 0 and 4.08 volts, with a resolution of
0.016 volt. The battery voltage in8 does not have limit registers.
0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
not have limit registers.
On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
the chip (in7, in8 and optionally in3). The driver handles this transparently
so user-space doesn't have to care.
The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value:
the voltage level your processor should work with. This is hardcoded by

60
Documentation/hwmon/lm85
Просмотреть файл

@ -14,6 +14,10 @@ Supported chips:
Prefix: 'adt7463'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
* Analog Devices ADT7468
Prefix: 'adt7468'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468
* SMSC EMC6D100, SMSC EMC6D101
Prefix: 'emc6d100'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
@ -34,7 +38,7 @@ Description
-----------
This driver implements support for the National Semiconductor LM85 and
compatible chips including the Analog Devices ADM1027, ADT7463 and
compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and
SMSC EMC6D10x chips family.
The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
@ -87,14 +91,22 @@ To smooth the response of fans to changes in temperature, the LM85 has an
optional filter for smoothing temperatures. The ADM1027 has the same
config option but uses it to rate limit the changes to fan speed instead.
The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure
temperatures with 0.25 degC resolution. They also provide an offset to the
temperature readings that is automatically applied during measurement.
This offset can be used to zero out any errors due to traces and placement.
The documentation says that the offset is in 0.25 degC steps, but in
initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
confirmed this "bug". The ADT7463 is reported to work as described in the
documentation. The current lm85 driver does not show the offset register.
The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore
measure temperatures with 0.25 degC resolution. They also provide an offset
to the temperature readings that is automatically applied during
measurement. This offset can be used to zero out any errors due to traces
and placement. The documentation says that the offset is in 0.25 degC
steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog
Devices has confirmed this "bug". The ADT7463 is reported to work as
described in the documentation. The current lm85 driver does not show the
offset register.
The ADT7468 has a high-frequency PWM mode, where all PWM outputs are
driven by a 22.5 kHz clock. This is a global mode, not per-PWM output,
which means that setting any PWM frequency above 11.3 kHz will switch
all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM
frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency
between 10 and 100 Hz, which can then be tuned separately.
See the vendor datasheets for more information. There is application note
from National (AN-1260) with some additional information about the LM85.
@ -125,17 +137,17 @@ datasheet for a complete description of the differences. Other than
identifying the chip, the driver behaves no differently with regard to
these two chips. The LM85B is recommended for new designs.
The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be
used to signal the chipset in case a limit is exceeded or the temperature
sensors fail. Individual sensor interrupts can be masked so they won't
trigger SMBALERT. The SMBALERT output if configured replaces one of the other
functions (PWM2 or IN0). This functionality is not implemented in current
driver.
The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output
that can be used to signal the chipset in case a limit is exceeded or the
temperature sensors fail. Individual sensor interrupts can be masked so
they won't trigger SMBALERT. The SMBALERT output if configured replaces one
of the other functions (PWM2 or IN0). This functionality is not implemented
in current driver.
The ADT7463 also has an optional THERM output/input which can be connected
to the processor PROC_HOT output. If available, the autofan control
dynamic Tmin feature can be enabled to keep the system temperature within
spec (just?!) with the least possible fan noise.
The ADT7463 and ADT7468 also have an optional THERM output/input which can
be connected to the processor PROC_HOT output. If available, the autofan
control dynamic Tmin feature can be enabled to keep the system temperature
within spec (just?!) with the least possible fan noise.
Configuration Notes
-------------------
@ -201,8 +213,8 @@ the temperatures to compensate for systemic errors in the
measurements. These features are not currently supported by the lm85
driver.
In addition to the ADM1027 features, the ADT7463 also has Tmin control
and THERM asserted counts. Automatic Tmin control acts to adjust the
Tmin value to maintain the measured temperature sensor at a specified
temperature. There isn't much documentation on this feature in the
ADT7463 data sheet. This is not supported by current driver.
In addition to the ADM1027 features, the ADT7463 and ADT7468 also have
Tmin control and THERM asserted counts. Automatic Tmin control acts to
adjust the Tmin value to maintain the measured temperature sensor at a
specified temperature. There isn't much documentation on this feature in
the ADT7463 data sheet. This is not supported by current driver.

44
Documentation/hwmon/lm90
Просмотреть файл

@ -63,8 +63,8 @@ Supported chips:
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6659
Prefix: 'max6657'
Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
Prefix: 'max6659'
Addresses scanned: I2C 0x4c, 0x4d, 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
* Maxim MAX6680
@ -84,6 +84,21 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
* Maxim MAX6695
Prefix: 'max6695'
Addresses scanned: I2C 0x18
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/datasheet/index.mvp/id/4199
* Maxim MAX6696
Prefix: 'max6695'
Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b,
0x4c, 0x4d and 0x4e
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/datasheet/index.mvp/id/4199
* Winbond/Nuvoton W83L771W/G
Prefix: 'w83l771'
Addresses scanned: I2C 0x4c
Datasheet: No longer available
* Winbond/Nuvoton W83L771AWG/ASG
Prefix: 'w83l771'
Addresses scanned: I2C 0x4c
@ -101,10 +116,11 @@ well as the temperature of up to one external diode. It is compatible
with many other devices, many of which are supported by this driver.
Note that there is no easy way to differentiate between the MAX6657,
MAX6658 and MAX6659 variants. The extra address and features of the
MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only
differ in their pinout, therefore they obviously can't (and don't need to)
be distinguished.
MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only
supported by this driver if the chip is located at address 0x4d or 0x4e,
or if the chip type is explicitly selected as max6659.
The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously
can't (and don't need to) be distinguished.
The specificity of this family of chipsets over the ADM1021/LM84
family is that it features critical limits with hysteresis, and an
@ -151,12 +167,22 @@ MAX6680 and MAX6681:
* Selectable address
* Remote sensor type selection
W83L771AWG/ASG
* The AWG and ASG variants only differ in package format.
MAX6695 and MAX6696:
* Better local resolution
* Selectable address (max6696)
* Second critical temperature limit
* Two remote sensors
W83L771W/G
* The G variant is lead-free, otherwise similar to the W.
* Filter and alert configuration register at 0xBF
* Diode ideality factor configuration (remote sensor) at 0xE3
* Moving average (depending on conversion rate)
W83L771AWG/ASG
* Successor of the W83L771W/G, same features.
* The AWG and ASG variants only differ in package format.
* Diode ideality factor configuration (remote sensor) at 0xE3
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature, 0.125 degree for the remote
temperature, except for the MAX6657, MAX6658 and MAX6659 which have a

18
Documentation/hwmon/pcf8591
Просмотреть файл

@ -4,7 +4,7 @@ Kernel driver pcf8591
Supported chips:
* Philips/NXP PCF8591
Prefix: 'pcf8591'
Addresses scanned: I2C 0x48 - 0x4f
Addresses scanned: none
Datasheet: Publicly available at the NXP website
http://www.nxp.com/pip/PCF8591_6.html
@ -58,18 +58,16 @@ Module parameters
Accessing PCF8591 via /sys interface
-------------------------------------
! Be careful !
The PCF8591 is plainly impossible to detect! Stupid chip.
So every chip with address in the interval [0x48..0x4f] is
detected as PCF8591. If you have other chips in this address
range, the workaround is to load this module after the one
for your others chips.
The PCF8591 is plainly impossible to detect! Thus the driver won't even
try. You have to explicitly instantiate the device at the relevant
address (in the interval [0x48..0x4f]) either through platform data, or
using the sysfs interface. See Documentation/i2c/instantiating-devices
for details.
On detection (i.e. insmod, modprobe et al.), directories are being
created for each detected PCF8591:
Directories are being created for each instantiated PCF8591:
/sys/bus/i2c/devices/<0>-<1>/
where <0> is the bus the chip was detected on (e. g. i2c-0)
where <0> is the bus the chip is connected to (e. g. i2c-0)
and <1> the chip address ([48..4f])
Inside these directories, there are such files:

15
Documentation/hwmon/sysfs-interface
Просмотреть файл

@ -309,6 +309,20 @@ temp[1-*]_crit_hyst
from the critical value.
RW
temp[1-*]_emergency
Temperature emergency max value, for chips supporting more than
two upper temperature limits. Must be equal or greater than
corresponding temp_crit values.
Unit: millidegree Celsius
RW
temp[1-*]_emergency_hyst
Temperature hysteresis value for emergency limit.
Unit: millidegree Celsius
Must be reported as an absolute temperature, NOT a delta
from the emergency value.
RW
temp[1-*]_lcrit Temperature critical min value, typically lower than
corresponding temp_min values.
Unit: millidegree Celsius
@ -505,6 +519,7 @@ fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
temp[1-*]_emergency_alarm
Limit alarm
0: no alarm
1: alarm

6
Documentation/i2c/busses/i2c-i801
Просмотреть файл

@ -15,10 +15,14 @@ Supported adapters:
* Intel 82801I (ICH9)
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
* Intel 3400/5 Series (PCH)
* Intel 5/3400 Series (PCH)
* Intel Cougar Point (PCH)
* Intel Patsburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
and the additional 'Integrated Device Function' controllers are supported.
Authors:
Mark Studebaker <mdsxyz123@yahoo.com>
Jean Delvare <khali@linux-fr.org>

3
Documentation/ioctl/ioctl-number.txt
Просмотреть файл

@ -259,7 +259,7 @@ Code Seq#(hex) Include File Comments
't' 00-7F linux/if_ppp.h
't' 80-8F linux/isdn_ppp.h
't' 90 linux/toshiba.h
'u' 00-1F linux/smb_fs.h
'u' 00-1F linux/smb_fs.h gone
'v' all linux/videodev.h conflict!
'v' 00-1F linux/ext2_fs.h conflict!
'v' 00-1F linux/fs.h conflict!
@ -278,7 +278,6 @@ Code Seq#(hex) Include File Comments
<mailto:oe@port.de>
'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict!
0x80 00-1F linux/fb.h
0x81 00-1F linux/videotext.h
0x88 00-3F media/ovcamchip.h
0x89 00-06 arch/x86/include/asm/sockios.h
0x89 0B-DF linux/sockios.h

3
Documentation/kbuild/kconfig-language.txt
Просмотреть файл

@ -322,7 +322,8 @@ mainmenu:
"mainmenu" <prompt>
This sets the config program's title bar if the config program chooses
to use it.
to use it. It should be placed at the top of the configuration, before any
other statement.
Kconfig hints

7
Documentation/kbuild/makefiles.txt
Просмотреть файл

@ -776,6 +776,13 @@ This will delete the directory debian, including all subdirectories.
Kbuild will assume the directories to be in the same relative path as the
Makefile if no absolute path is specified (path does not start with '/').
To exclude certain files from make clean, use the $(no-clean-files) variable.
This is only a special case used in the top level Kbuild file:
Example:
#Kbuild
no-clean-files := $(bounds-file) $(offsets-file)
Usually kbuild descends down in subdirectories due to "obj-* := dir/",
but in the architecture makefiles where the kbuild infrastructure
is not sufficient this sometimes needs to be explicit.

723
Documentation/kbuild/modules.txt
Просмотреть файл

@ -1,215 +1,185 @@
Building External Modules
In this document you will find information about:
- how to build external modules
- how to make your module use the kbuild infrastructure
- how kbuild will install a kernel
- how to install modules in a non-standard location
This document describes how to build an out-of-tree kernel module.
=== Table of Contents
=== 1 Introduction
=== 2 How to build external modules
--- 2.1 Building external modules
--- 2.2 Available targets
--- 2.3 Available options
--- 2.4 Preparing the kernel tree for module build
--- 2.5 Building separate files for a module
=== 3. Example commands
=== 4. Creating a kbuild file for an external module
=== 5. Include files
--- 5.1 How to include files from the kernel include dir
--- 5.2 External modules using an include/ dir
--- 5.3 External modules using several directories
=== 6. Module installation
--- 6.1 INSTALL_MOD_PATH
--- 6.2 INSTALL_MOD_DIR
=== 7. Module versioning & Module.symvers
--- 7.1 Symbols from the kernel (vmlinux + modules)
--- 7.2 Symbols and external modules
--- 7.3 Symbols from another external module
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR
=== 2 How to Build External Modules
--- 2.1 Command Syntax
--- 2.2 Options
--- 2.3 Targets
--- 2.4 Building Separate Files
=== 3. Creating a Kbuild File for an External Module
--- 3.1 Shared Makefile
--- 3.2 Separate Kbuild file and Makefile
--- 3.3 Binary Blobs
--- 3.4 Building Multiple Modules
=== 4. Include Files
--- 4.1 Kernel Includes
--- 4.2 Single Subdirectory
--- 4.3 Several Subdirectories
=== 5. Module Installation
--- 5.1 INSTALL_MOD_PATH
--- 5.2 INSTALL_MOD_DIR
=== 6. Module Versioning
--- 6.1 Symbols From the Kernel (vmlinux + modules)
--- 6.2 Symbols and External Modules
--- 6.3 Symbols From Another External Module
=== 7. Tips & Tricks
--- 7.1 Testing for CONFIG_FOO_BAR
=== 1. Introduction
kbuild includes functionality for building modules both
within the kernel source tree and outside the kernel source tree.
The latter is usually referred to as external or "out-of-tree"
modules and is used both during development and for modules that
are not planned to be included in the kernel tree.
"kbuild" is the build system used by the Linux kernel. Modules must use
kbuild to stay compatible with changes in the build infrastructure and
to pick up the right flags to "gcc." Functionality for building modules
both in-tree and out-of-tree is provided. The method for building
either is similar, and all modules are initially developed and built
out-of-tree.
What is covered within this file is mainly information to authors
of modules. The author of an external module should supply
a makefile that hides most of the complexity, so one only has to type
'make' to build the module. A complete example will be presented in
chapter 4, "Creating a kbuild file for an external module".
Covered in this document is information aimed at developers interested
in building out-of-tree (or "external") modules. The author of an
external module should supply a makefile that hides most of the
complexity, so one only has to type "make" to build the module. This is
easily accomplished, and a complete example will be presented in
section 3.
=== 2. How to build external modules
=== 2. How to Build External Modules
kbuild offers functionality to build external modules, with the
prerequisite that there is a pre-built kernel available with full source.
A subset of the targets available when building the kernel is available
when building an external module.
To build external modules, you must have a prebuilt kernel available
that contains the configuration and header files used in the build.
Also, the kernel must have been built with modules enabled. If you are
using a distribution kernel, there will be a package for the kernel you
are running provided by your distribution.
--- 2.1 Building external modules
An alternative is to use the "make" target "modules_prepare." This will
make sure the kernel contains the information required. The target
exists solely as a simple way to prepare a kernel source tree for
building external modules.
Use the following command to build an external module:
NOTE: "modules_prepare" will not build Module.symvers even if
CONFIG_MODVERSIONS is set; therefore, a full kernel build needs to be
executed to make module versioning work.
make -C <path-to-kernel> M=`pwd`
--- 2.1 Command Syntax
For the running kernel use:
The command to build an external module is:
make -C /lib/modules/`uname -r`/build M=`pwd`
$ make -C <path_to_kernel_src> M=$PWD
For the above command to succeed, the kernel must have been
built with modules enabled.
The kbuild system knows that an external module is being built
due to the "M=<dir>" option given in the command.
To install the modules that were just built:
To build against the running kernel use:
make -C <path-to-kernel> M=`pwd` modules_install
$ make -C /lib/modules/`uname -r`/build M=$PWD
More complex examples will be shown later, the above should
be enough to get you started.
Then to install the module(s) just built, add the target
"modules_install" to the command:
--- 2.2 Available targets
$ make -C /lib/modules/`uname -r`/build M=$PWD modules_install
$KDIR refers to the path to the kernel source top-level directory
--- 2.2 Options
make -C $KDIR M=`pwd`
Will build the module(s) located in current directory.
All output files will be located in the same directory
as the module source.
No attempts are made to update the kernel source, and it is
a precondition that a successful make has been executed
for the kernel.
($KDIR refers to the path of the kernel source directory.)
make -C $KDIR M=`pwd` modules
The modules target is implied when no target is given.
Same functionality as if no target was specified.
See description above.
make -C $KDIR M=$PWD
make -C $KDIR M=`pwd` modules_install
Install the external module(s).
Installation default is in /lib/modules/<kernel-version>/extra,
but may be prefixed with INSTALL_MOD_PATH - see separate
chapter.
-C $KDIR
The directory where the kernel source is located.
"make" will actually change to the specified directory
when executing and will change back when finished.
make -C $KDIR M=`pwd` clean
Remove all generated files for the module - the kernel
source directory is not modified.
M=$PWD
Informs kbuild that an external module is being built.
The value given to "M" is the absolute path of the
directory where the external module (kbuild file) is
located.
make -C $KDIR M=`pwd` help
help will list the available target when building external
modules.
--- 2.3 Targets
--- 2.3 Available options:
When building an external module, only a subset of the "make"
targets are available.
$KDIR refers to the path to the kernel source top-level directory
make -C $KDIR M=$PWD [target]
make -C $KDIR
Used to specify where to find the kernel source.
'$KDIR' represent the directory where the kernel source is.
Make will actually change directory to the specified directory
when executed but change back when finished.
The default will build the module(s) located in the current
directory, so a target does not need to be specified. All
output files will also be generated in this directory. No
attempts are made to update the kernel source, and it is a
precondition that a successful "make" has been executed for the
kernel.
make -C $KDIR M=`pwd`
M= is used to tell kbuild that an external module is
being built.
The option given to M= is the directory where the external
module (kbuild file) is located.
When an external module is being built only a subset of the
usual targets are available.
modules
The default target for external modules. It has the
same functionality as if no target was specified. See
description above.
make -C $KDIR SUBDIRS=`pwd`
Same as M=. The SUBDIRS= syntax is kept for backwards
compatibility.
modules_install
Install the external module(s). The default location is
/lib/modules/<kernel_release>/extra/, but a prefix may
be added with INSTALL_MOD_PATH (discussed in section 5).
--- 2.4 Preparing the kernel tree for module build
clean
Remove all generated files in the module directory only.
To make sure the kernel contains the information required to
build external modules the target 'modules_prepare' must be used.
'modules_prepare' exists solely as a simple way to prepare
a kernel source tree for building external modules.
Note: modules_prepare will not build Module.symvers even if
CONFIG_MODVERSIONS is set. Therefore a full kernel build
needs to be executed to make module versioning work.
help
List the available targets for external modules.
--- 2.5 Building separate files for a module
It is possible to build single files which are part of a module.
This works equally well for the kernel, a module and even for
--- 2.4 Building Separate Files
It is possible to build single files that are part of a module.
This works equally well for the kernel, a module, and even for
external modules.
Examples (module foo.ko, consist of bar.o, baz.o):
make -C $KDIR M=`pwd` bar.lst
make -C $KDIR M=`pwd` bar.o
make -C $KDIR M=`pwd` foo.ko
make -C $KDIR M=`pwd` /
Example (The module foo.ko, consist of bar.o and baz.o):
make -C $KDIR M=$PWD bar.lst
make -C $KDIR M=$PWD baz.o
make -C $KDIR M=$PWD foo.ko
make -C $KDIR M=$PWD /
=== 3. Example commands
=== 3. Creating a Kbuild File for an External Module
This example shows the actual commands to be executed when building
an external module for the currently running kernel.
In the example below, the distribution is supposed to use the
facility to locate output files for a kernel compile in a different
directory than the kernel source - but the examples will also work
when the source and the output files are mixed in the same directory.
In the last section we saw the command to build a module for the
running kernel. The module is not actually built, however, because a
build file is required. Contained in this file will be the name of
the module(s) being built, along with the list of requisite source
files. The file may be as simple as a single line:
# Kernel source
/lib/modules/<kernel-version>/source -> /usr/src/linux-<version>
obj-m := <module_name>.o
# Output from kernel compile
/lib/modules/<kernel-version>/build -> /usr/src/linux-<version>-up
The kbuild system will build <module_name>.o from <module_name>.c,
and, after linking, will result in the kernel module <module_name>.ko.
The above line can be put in either a "Kbuild" file or a "Makefile."
When the module is built from multiple sources, an additional line is
needed listing the files:
Change to the directory where the kbuild file is located and execute
the following commands to build the module:
<module_name>-y := <src1>.o <src2>.o ...
cd /home/user/src/module
make -C /usr/src/`uname -r`/source \
O=/lib/modules/`uname-r`/build \
M=`pwd`
NOTE: Further documentation describing the syntax used by kbuild is
located in Documentation/kbuild/makefiles.txt.
Then, to install the module use the following command:
The examples below demonstrate how to create a build file for the
module 8123.ko, which is built from the following files:
make -C /usr/src/`uname -r`/source \
O=/lib/modules/`uname-r`/build \
M=`pwd` \
modules_install
If you look closely you will see that this is the same command as
listed before - with the directories spelled out.
The above are rather long commands, and the following chapter
lists a few tricks to make it all easier.
=== 4. Creating a kbuild file for an external module
kbuild is the build system for the kernel, and external modules
must use kbuild to stay compatible with changes in the build system
and to pick up the right flags to gcc etc.
The kbuild file used as input shall follow the syntax described
in Documentation/kbuild/makefiles.txt. This chapter will introduce a few
more tricks to be used when dealing with external modules.
In the following a Makefile will be created for a module with the
following files:
8123_if.c
8123_if.h
8123_pci.c
8123_bin.o_shipped <= Binary blob
--- 4.1 Shared Makefile for module and kernel
--- 3.1 Shared Makefile
An external module always includes a wrapper Makefile supporting
building the module using 'make' with no arguments.
The Makefile provided will most likely include additional
functionality such as test targets etc. and this part shall
be filtered away from kbuild since it may impact kbuild if
name clashes occurs.
An external module always includes a wrapper makefile that
supports building the module using "make" with no arguments.
This target is not used by kbuild; it is only for convenience.
Additional functionality, such as test targets, can be included
but should be filtered out from kbuild due to possible name
clashes.
Example 1:
--> filename: Makefile
@ -219,11 +189,11 @@ following files:
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
else
# Normal Makefile
# normal makefile
KDIR ?= /lib/modules/`uname -r`/build
KERNELDIR := /lib/modules/`uname -r`/build
all::
$(MAKE) -C $(KERNELDIR) M=`pwd` $@
default:
$(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
@ -231,15 +201,20 @@ following files:
endif
In example 1, the check for KERNELRELEASE is used to separate
the two parts of the Makefile. kbuild will only see the two
assignments whereas make will see everything except the two
kbuild assignments.
The check for KERNELRELEASE is used to separate the two parts
of the makefile. In the example, kbuild will only see the two
assignments, whereas "make" will see everything except these
two assignments. This is due to two passes made on the file:
the first pass is by the "make" instance run on the command
line; the second pass is by the kbuild system, which is
initiated by the parameterized "make" in the default target.
In recent versions of the kernel, kbuild will look for a file named
Kbuild and as second option look for a file named Makefile.
Utilising the Kbuild file makes us split up the Makefile in example 1
into two files as shown in example 2:
--- 3.2 Separate Kbuild File and Makefile
In newer versions of the kernel, kbuild will first look for a
file named "Kbuild," and only if that is not found, will it
then look for a makefile. Utilizing a "Kbuild" file allows us
to split up the makefile from example 1 into two files:
Example 2:
--> filename: Kbuild
@ -247,20 +222,21 @@ following files:
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
--> filename: Makefile
KERNELDIR := /lib/modules/`uname -r`/build
all::
$(MAKE) -C $(KERNELDIR) M=`pwd` $@
KDIR ?= /lib/modules/`uname -r`/build
default:
$(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
echo "X" > 8123_bin.o_shipped
The split in example 2 is questionable due to the simplicity of
each file; however, some external modules use makefiles
consisting of several hundred lines, and here it really pays
off to separate the kbuild part from the rest.
In example 2, we are down to two fairly simple files and for simple
files as used in this example the split is questionable. But some
external modules use Makefiles of several hundred lines and here it
really pays off to separate the kbuild part from the rest.
Example 3 shows a backward compatible version.
The next example shows a backward compatible version.
Example 3:
--> filename: Kbuild
@ -269,13 +245,15 @@ following files:
--> filename: Makefile
ifneq ($(KERNELRELEASE),)
# kbuild part of makefile
include Kbuild
else
# Normal Makefile
KERNELDIR := /lib/modules/`uname -r`/build
all::
$(MAKE) -C $(KERNELDIR) M=`pwd` $@
else
# normal makefile
KDIR ?= /lib/modules/`uname -r`/build
default:
$(MAKE) -C $(KDIR) M=$$PWD
# Module specific targets
genbin:
@ -283,260 +261,271 @@ following files:
endif
The trick here is to include the Kbuild file from Makefile, so
if an older version of kbuild picks up the Makefile, the Kbuild
file will be included.
Here the "Kbuild" file is included from the makefile. This
allows an older version of kbuild, which only knows of
makefiles, to be used when the "make" and kbuild parts are
split into separate files.
--- 4.2 Binary blobs included in a module
--- 3.3 Binary Blobs
Some external modules needs to include a .o as a blob. kbuild
has support for this, but requires the blob file to be named
<filename>_shipped. In our example the blob is named
8123_bin.o_shipped and when the kbuild rules kick in the file
8123_bin.o is created as a simple copy off the 8213_bin.o_shipped file
with the _shipped part stripped of the filename.
This allows the 8123_bin.o filename to be used in the assignment to
the module.
Some external modules need to include an object file as a blob.
kbuild has support for this, but requires the blob file to be
named <filename>_shipped. When the kbuild rules kick in, a copy
of <filename>_shipped is created with _shipped stripped off,
giving us <filename>. This shortened filename can be used in
the assignment to the module.
Throughout this section, 8123_bin.o_shipped has been used to
build the kernel module 8123.ko; it has been included as
8123_bin.o.
Example 4:
obj-m := 8123.o
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
In example 4, there is no distinction between the ordinary .c/.h files
and the binary file. But kbuild will pick up different rules to create
the .o file.
Although there is no distinction between the ordinary source
files and the binary file, kbuild will pick up different rules
when creating the object file for the module.
--- 3.4 Building Multiple Modules
kbuild supports building multiple modules with a single build
file. For example, if you wanted to build two modules, foo.ko
and bar.ko, the kbuild lines would be:
obj-m := foo.o bar.o
foo-y := <foo_srcs>
bar-y := <bar_srcs>
It is that simple!
=== 5. Include files
=== 4. Include Files
Include files are a necessity when a .c file uses something from other .c
files (not strictly in the sense of C, but if good programming practice is
used). Any module that consists of more than one .c file will have a .h file
for one of the .c files.
Within the kernel, header files are kept in standard locations
according to the following rule:
- If the .h file only describes a module internal interface, then the .h file
shall be placed in the same directory as the .c files.
- If the .h files describe an interface used by other parts of the kernel
located in different directories, the .h files shall be located in
include/linux/ or other include/ directories as appropriate.
* If the header file only describes the internal interface of a
module, then the file is placed in the same directory as the
source files.
* If the header file describes an interface used by other parts
of the kernel that are located in different directories, then
the file is placed in include/linux/.
One exception for this rule is larger subsystems that have their own directory
under include/ such as include/scsi. Another exception is arch-specific
.h files which are located under include/asm-$(ARCH)/*.
NOTE: There are two notable exceptions to this rule: larger
subsystems have their own directory under include/, such as
include/scsi; and architecture specific headers are located
under arch/$(ARCH)/include/.
External modules have a tendency to locate include files in a separate include/
directory and therefore need to deal with this in their kbuild file.
--- 4.1 Kernel Includes
--- 5.1 How to include files from the kernel include dir
To include a header file located under include/linux/, simply
use:
When a module needs to include a file from include/linux/, then one
just uses:
#include <linux/module.h>
#include <linux/modules.h>
kbuild will add options to "gcc" so the relevant directories
are searched.
kbuild will make sure to add options to gcc so the relevant
directories are searched.
Likewise for .h files placed in the same directory as the .c file.
--- 4.2 Single Subdirectory
#include "8123_if.h"
External modules tend to place header files in a separate
include/ directory where their source is located, although this
is not the usual kernel style. To inform kbuild of the
directory, use either ccflags-y or CFLAGS_<filename>.o.
will do the job.
--- 5.2 External modules using an include/ dir
External modules often locate their .h files in a separate include/
directory although this is not usual kernel style. When an external
module uses an include/ dir then kbuild needs to be told so.
The trick here is to use either EXTRA_CFLAGS (take effect for all .c
files) or CFLAGS_$F.o (take effect only for a single file).
In our example, if we move 8123_if.h to a subdirectory named include/
the resulting Kbuild file would look like:
Using the example from section 3, if we moved 8123_if.h to a
subdirectory named include, the resulting kbuild file would
look like:
--> filename: Kbuild
obj-m := 8123.o
obj-m := 8123.o
EXTRA_CFLAGS := -Iinclude
ccflags-y := -Iinclude
8123-y := 8123_if.o 8123_pci.o 8123_bin.o
Note that in the assignment there is no space between -I and the path.
This is a kbuild limitation: there must be no space present.
Note that in the assignment there is no space between -I and
the path. This is a limitation of kbuild: there must be no
space present.
--- 5.3 External modules using several directories
If an external module does not follow the usual kernel style, but
decides to spread files over several directories, then kbuild can
handle this too.
--- 4.3 Several Subdirectories
kbuild can handle files that are spread over several directories.
Consider the following example:
|
+- src/complex_main.c
| +- hal/hardwareif.c
| +- hal/include/hardwareif.h
+- include/complex.h
.
|__ src
| |__ complex_main.c
| |__ hal
| |__ hardwareif.c
| |__ include
| |__ hardwareif.h
|__ include
|__ complex.h
To build a single module named complex.ko, we then need the following
To build the module complex.ko, we then need the following
kbuild file:
Kbuild:
--> filename: Kbuild
obj-m := complex.o
complex-y := src/complex_main.o
complex-y += src/hal/hardwareif.o
EXTRA_CFLAGS := -I$(src)/include
EXTRA_CFLAGS += -I$(src)src/hal/include
ccflags-y := -I$(src)/include
ccflags-y += -I$(src)/src/hal/include
As you can see, kbuild knows how to handle object files located
in other directories. The trick is to specify the directory
relative to the kbuild file's location. That being said, this
is NOT recommended practice.
For the header files, kbuild must be explicitly told where to
look. When kbuild executes, the current directory is always the
root of the kernel tree (the argument to "-C") and therefore an
absolute path is needed. $(src) provides the absolute path by
pointing to the directory where the currently executing kbuild
file is located.
kbuild knows how to handle .o files located in another directory -
although this is NOT recommended practice. The syntax is to specify
the directory relative to the directory where the Kbuild file is
located.
=== 5. Module Installation
To find the .h files, we have to explicitly tell kbuild where to look
for the .h files. When kbuild executes, the current directory is always
the root of the kernel tree (argument to -C) and therefore we have to
tell kbuild how to find the .h files using absolute paths.
$(src) will specify the absolute path to the directory where the
Kbuild file are located when being build as an external module.
Therefore -I$(src)/ is used to point out the directory of the Kbuild
file and any additional path are just appended.
Modules which are included in the kernel are installed in the
directory:
=== 6. Module installation
/lib/modules/$(KERNELRELEASE)/kernel/
Modules which are included in the kernel are installed in the directory:
And external modules are installed in:
/lib/modules/$(KERNELRELEASE)/kernel
/lib/modules/$(KERNELRELEASE)/extra/
External modules are installed in the directory:
--- 5.1 INSTALL_MOD_PATH
/lib/modules/$(KERNELRELEASE)/extra
--- 6.1 INSTALL_MOD_PATH
Above are the default directories, but as always, some level of
customization is possible. One can prefix the path using the variable
INSTALL_MOD_PATH:
Above are the default directories but as always some level of
customization is possible. A prefix can be added to the
installation path using the variable INSTALL_MOD_PATH:
$ make INSTALL_MOD_PATH=/frodo modules_install
=> Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel
=> Install dir: /frodo/lib/modules/$(KERNELRELEASE)/kernel/
INSTALL_MOD_PATH may be set as an ordinary shell variable or as in the
example above, can be specified on the command line when calling make.
INSTALL_MOD_PATH has effect both when installing modules included in
the kernel as well as when installing external modules.
INSTALL_MOD_PATH may be set as an ordinary shell variable or,
as shown above, can be specified on the command line when
calling "make." This has effect when installing both in-tree
and out-of-tree modules.
--- 6.2 INSTALL_MOD_DIR
--- 5.2 INSTALL_MOD_DIR
When installing external modules they are by default installed to a
directory under /lib/modules/$(KERNELRELEASE)/extra, but one may wish
to locate modules for a specific functionality in a separate
directory. For this purpose, one can use INSTALL_MOD_DIR to specify an
alternative name to 'extra'.
External modules are by default installed to a directory under
/lib/modules/$(KERNELRELEASE)/extra/, but you may wish to
locate modules for a specific functionality in a separate
directory. For this purpose, use INSTALL_MOD_DIR to specify an
alternative name to "extra."
$ make INSTALL_MOD_DIR=gandalf -C KERNELDIR \
M=`pwd` modules_install
=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf
$ make INSTALL_MOD_DIR=gandalf -C $KDIR \
M=$PWD modules_install
=> Install dir: /lib/modules/$(KERNELRELEASE)/gandalf/
=== 7. Module versioning & Module.symvers
=== 6. Module Versioning
Module versioning is enabled by the CONFIG_MODVERSIONS tag.
Module versioning is enabled by the CONFIG_MODVERSIONS tag, and is used
as a simple ABI consistency check. A CRC value of the full prototype
for an exported symbol is created. When a module is loaded/used, the
CRC values contained in the kernel are compared with similar values in
the module; if they are not equal, the kernel refuses to load the
module.
Module versioning is used as a simple ABI consistency check. The Module
versioning creates a CRC value of the full prototype for an exported symbol and
when a module is loaded/used then the CRC values contained in the kernel are
compared with similar values in the module. If they are not equal, then the
kernel refuses to load the module.
Module.symvers contains a list of all exported symbols from a kernel
build.
Module.symvers contains a list of all exported symbols from a kernel build.
--- 6.1 Symbols From the Kernel (vmlinux + modules)
--- 7.1 Symbols from the kernel (vmlinux + modules)
During a kernel build, a file named Module.symvers will be generated.
Module.symvers contains all exported symbols from the kernel and
compiled modules. For each symbols, the corresponding CRC value
is stored too.
During a kernel build, a file named Module.symvers will be
generated. Module.symvers contains all exported symbols from
the kernel and compiled modules. For each symbol, the
corresponding CRC value is also stored.
The syntax of the Module.symvers file is:
<CRC> <Symbol> <module>
Sample:
<CRC> <Symbol> <module>
0x2d036834 scsi_remove_host drivers/scsi/scsi_mod
For a kernel build without CONFIG_MODVERSIONS enabled, the crc
would read: 0x00000000
For a kernel build without CONFIG_MODVERSIONS enabled, the CRC
would read 0x00000000.
Module.symvers serves two purposes:
1) It lists all exported symbols both from vmlinux and all modules
2) It lists the CRC if CONFIG_MODVERSIONS is enabled
1) It lists all exported symbols from vmlinux and all modules.
2) It lists the CRC if CONFIG_MODVERSIONS is enabled.
--- 7.2 Symbols and external modules
--- 6.2 Symbols and External Modules
When building an external module, the build system needs access to
the symbols from the kernel to check if all external symbols are
defined. This is done in the MODPOST step and to obtain all
symbols, modpost reads Module.symvers from the kernel.
If a Module.symvers file is present in the directory where
the external module is being built, this file will be read too.
During the MODPOST step, a new Module.symvers file will be written
containing all exported symbols that were not defined in the kernel.
When building an external module, the build system needs access
to the symbols from the kernel to check if all external symbols
are defined. This is done in the MODPOST step. modpost obtains
the symbols by reading Module.symvers from the kernel source
tree. If a Module.symvers file is present in the directory
where the external module is being built, this file will be
read too. During the MODPOST step, a new Module.symvers file
will be written containing all exported symbols that were not
defined in the kernel.
--- 7.3 Symbols from another external module
--- 6.3 Symbols From Another External Module
Sometimes, an external module uses exported symbols from another
external module. Kbuild needs to have full knowledge on all symbols
to avoid spitting out warnings about undefined symbols.
Three solutions exist to let kbuild know all symbols of more than
one external module.
The method with a top-level kbuild file is recommended but may be
impractical in certain situations.
Sometimes, an external module uses exported symbols from
another external module. kbuild needs to have full knowledge of
all symbols to avoid spitting out warnings about undefined
symbols. Three solutions exist for this situation.
Use a top-level Kbuild file
If you have two modules: 'foo' and 'bar', and 'foo' needs
symbols from 'bar', then one can use a common top-level kbuild
file so both modules are compiled in same build.
NOTE: The method with a top-level kbuild file is recommended
but may be impractical in certain situations.
Consider following directory layout:
./foo/ <= contains the foo module
./bar/ <= contains the bar module
The top-level Kbuild file would then look like:
Use a top-level kbuild file
If you have two modules, foo.ko and bar.ko, where
foo.ko needs symbols from bar.ko, you can use a
common top-level kbuild file so both modules are
compiled in the same build. Consider the following
directory layout:
#./Kbuild: (this file may also be named Makefile)
./foo/ <= contains foo.ko
./bar/ <= contains bar.ko
The top-level kbuild file would then look like:
#./Kbuild (or ./Makefile):
obj-y := foo/ bar/
Executing:
make -C $KDIR M=`pwd`
And executing
will then do the expected and compile both modules with full
knowledge on symbols from both modules.
$ make -C $KDIR M=$PWD
will then do the expected and compile both modules with
full knowledge of symbols from either module.
Use an extra Module.symvers file
When an external module is built, a Module.symvers file is
generated containing all exported symbols which are not
defined in the kernel.
To get access to symbols from module 'bar', one can copy the
Module.symvers file from the compilation of the 'bar' module
to the directory where the 'foo' module is built.
During the module build, kbuild will read the Module.symvers
file in the directory of the external module and when the
build is finished, a new Module.symvers file is created
containing the sum of all symbols defined and not part of the
kernel.
When an external module is built, a Module.symvers file
is generated containing all exported symbols which are
not defined in the kernel. To get access to symbols
from bar.ko, copy the Module.symvers file from the
compilation of bar.ko to the directory where foo.ko is
built. During the module build, kbuild will read the
Module.symvers file in the directory of the external
module, and when the build is finished, a new
Module.symvers file is created containing the sum of
all symbols defined and not part of the kernel.
Use make variable KBUILD_EXTRA_SYMBOLS in the Makefile
If it is impractical to copy Module.symvers from another
module, you can assign a space separated list of files to
KBUILD_EXTRA_SYMBOLS in your Makfile. These files will be
loaded by modpost during the initialisation of its symbol
tables.
Use "make" variable KBUILD_EXTRA_SYMBOLS
If it is impractical to copy Module.symvers from
another module, you can assign a space separated list
of files to KBUILD_EXTRA_SYMBOLS in your build file.
These files will be loaded by modpost during the
initialization of its symbol tables.
=== 8. Tips & Tricks
--- 8.1 Testing for CONFIG_FOO_BAR
=== 7. Tips & Tricks
Modules often need to check for certain CONFIG_ options to decide if
a specific feature shall be included in the module. When kbuild is used
this is done by referencing the CONFIG_ variable directly.
--- 7.1 Testing for CONFIG_FOO_BAR
Modules often need to check for certain CONFIG_ options to
decide if a specific feature is included in the module. In
kbuild this is done by referencing the CONFIG_ variable
directly.
#fs/ext2/Makefile
obj-$(CONFIG_EXT2_FS) += ext2.o
@ -544,9 +533,9 @@ Module.symvers contains a list of all exported symbols from a kernel build.
ext2-y := balloc.o bitmap.o dir.o
ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
External modules have traditionally used grep to check for specific
CONFIG_ settings directly in .config. This usage is broken.
As introduced before, external modules shall use kbuild when building
and therefore can use the same methods as in-kernel modules when
testing for CONFIG_ definitions.
External modules have traditionally used "grep" to check for
specific CONFIG_ settings directly in .config. This usage is
broken. As introduced before, external modules should use
kbuild for building and can therefore use the same methods as
in-tree modules when testing for CONFIG_ definitions.

7
Documentation/kernel-parameters.txt
Просмотреть файл

@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
Format: {"cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
@ -2175,6 +2175,11 @@ and is between 256 and 4096 characters. It is defined in the file
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
resource_alloc_from_bottom
Allocate new resources from the beginning of available
space, not the end. If you need to use this, please
report a bug.
resume= [SWSUSP]
Specify the partition device for software suspend

19
Documentation/leds-class.txt
Просмотреть файл

@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). If implemented, triggers can
attempt to use it before falling back to software timers. The blink_set()
function should return 0 if the blink setting is supported, or -EINVAL
otherwise, which means that LED blinking will be handled by software.
blink_set() function (see <linux/leds.h>). To set an LED to blinking,
however, it is better to use use the API function led_blink_set(),
as it will check and implement software fallback if necessary.
The blink_set() function should choose a user friendly blinking
value if it is called with *delay_on==0 && *delay_off==0 parameters. In
this case the driver should give back the chosen value through delay_on
and delay_off parameters to the leds subsystem.
To turn off blinking again, use the API function led_brightness_set()
as that will not just set the LED brightness but also stop any software
timers that may have been required for blinking.
The blink_set() function should choose a user friendly blinking value
if it is called with *delay_on==0 && *delay_off==0 parameters. In this
case the driver should give back the chosen value through delay_on and
delay_off parameters to the leds subsystem.
Setting the brightness to zero with brightness_set() callback function
should completely turn off the LED and cancel the previously programmed

88
Documentation/leds/leds-lp5521.txt Normal file
Просмотреть файл

@ -0,0 +1,88 @@
Kernel driver for lp5521
========================
* National Semiconductor LP5521 led driver chip
* Datasheet: http://www.national.com/pf/LP/LP5521.html
Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
Description
-----------
LP5521 can drive up to 3 channels. Leds can be controlled directly via
the led class control interface. Channels have generic names:
lp5521:channelx, where x is 0 .. 2
All three channels can be also controlled using the engine micro programs.
More details of the instructions can be found from the public data sheet.
Control interface for the engines:
x is 1 .. 3
enginex_mode : disabled, load, run
enginex_load : store program (visible only in engine load mode)
Example (start to blink the channel 2 led):
cd /sys/class/leds/lp5521:channel2/device
echo "load" > engine3_mode
echo "037f4d0003ff6000" > engine3_load
echo "run" > engine3_mode
stop the engine:
echo "disabled" > engine3_mode
sysfs contains a selftest entry.
The test communicates with the chip and checks that
the clock mode is automatically set to the requested one.
Each channel has its own led current settings.
/sys/class/leds/lp5521:channel0/led_current - RW
/sys/class/leds/lp5521:channel0/max_current - RO
Format: 10x mA i.e 10 means 1.0 mA
example platform data:
Note: chan_nr can have values between 0 and 2.
static struct lp5521_led_config lp5521_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
}, {
.chan_nr = 1,
.led_current = 0,
.max_current = 130,
}, {
.chan_nr = 2,
.led_current = 0,
.max_current = 130,
}
};
static int lp5521_setup(void)
{
/* setup HW resources */
}
static void lp5521_release(void)
{
/* Release HW resources */
}
static void lp5521_enable(bool state)
{
/* Control of chip enable signal */
}
static struct lp5521_platform_data lp5521_platform_data = {
.led_config = lp5521_led_config,
.num_channels = ARRAY_SIZE(lp5521_led_config),
.clock_mode = LP5521_CLOCK_EXT,
.setup_resources = lp5521_setup,
.release_resources = lp5521_release,
.enable = lp5521_enable,
};
If the current is set to 0 in the platform data, that channel is
disabled and it is not visible in the sysfs.

83
Documentation/leds/leds-lp5523.txt Normal file
Просмотреть файл

@ -0,0 +1,83 @@
Kernel driver for lp5523
========================
* National Semiconductor LP5523 led driver chip
* Datasheet: http://www.national.com/pf/LP/LP5523.html
Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
Description
-----------
LP5523 can drive up to 9 channels. Leds can be controlled directly via
the led class control interface. Channels have generic names:
lp5523:channelx where x is 0...8
The chip provides 3 engines. Each engine can control channels without
interaction from the main CPU. Details of the micro engine code can be found
from the public data sheet. Leds can be muxed to different channels.
Control interface for the engines:
x is 1 .. 3
enginex_mode : disabled, load, run
enginex_load : microcode load (visible only in load mode)
enginex_leds : led mux control (visible only in load mode)
cd /sys/class/leds/lp5523:channel2/device
echo "load" > engine3_mode
echo "9d80400004ff05ff437f0000" > engine3_load
echo "111111111" > engine3_leds
echo "run" > engine3_mode
sysfs contains a selftest entry. It measures each channel
voltage level and checks if it looks reasonable. If the level is too high,
the led is missing; if the level is too low, there is a short circuit.
Selftest uses always the current from the platform data.
Each channel contains led current settings.
/sys/class/leds/lp5523:channel2/led_current - RW
/sys/class/leds/lp5523:channel2/max_current - RO
Format: 10x mA i.e 10 means 1.0 mA
Example platform data:
Note - chan_nr can have values between 0 and 8.
static struct lp5523_led_config lp5523_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
},
...
}, {
.chan_nr = 8,
.led_current = 50,
.max_current = 130,
}
};
static int lp5523_setup(void)
{
/* Setup HW resources */
}
static void lp5523_release(void)
{
/* Release HW resources */
}
static void lp5523_enable(bool state)
{
/* Control chip enable signal */
}
static struct lp5523_platform_data lp5523_platform_data = {
.led_config = lp5523_led_config,
.num_channels = ARRAY_SIZE(lp5523_led_config),
.clock_mode = LP5523_CLOCK_EXT,
.setup_resources = lp5523_setup,
.release_resources = lp5523_release,
.enable = lp5523_enable,
};

9
Documentation/networking/ip-sysctl.txt
Просмотреть файл

@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
neigh/default/gc_thresh3 - INTEGER
Maximum number of neighbor entries allowed. Increase this
when using large numbers of interfaces and when communicating
with large numbers of directly-connected peers.
mtu_expires - INTEGER
Time, in seconds, that cached PMTU information is kept.

18
Documentation/networking/phy.txt
Просмотреть файл

@ -177,18 +177,6 @@ Doing it all yourself
A convenience function to print out the PHY status neatly.
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
Clear the PHY's interrupt, and configure which ones are allowed,
respectively. Currently only supports all on, or all off.
int phy_enable_interrupts(struct phy_device *phydev);
int phy_disable_interrupts(struct phy_device *phydev);
Functions which enable/disable PHY interrupts, clearing them
before and after, respectively.
int phy_start_interrupts(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);
@ -213,12 +201,6 @@ Doing it all yourself
Fills the phydev structure with up-to-date information about the current
settings in the PHY.
void phy_sanitize_settings(struct phy_device *phydev)
Resolves differences between currently desired settings, and
supported settings for the given PHY device. Does not make
the changes in the hardware, though.
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);

4
Documentation/rbtree.txt
Просмотреть файл

@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
To quote Linux Weekly News:
There are a number of red-black trees in use in the kernel.
The anticipatory, deadline, and CFQ I/O schedulers all employ
rbtrees to track requests; the packet CD/DVD driver does the same.
The deadline and CFQ I/O schedulers employ rbtrees to
track requests; the packet CD/DVD driver does the same.
The high-resolution timer code uses an rbtree to organize outstanding
timer requests. The ext3 filesystem tracks directory entries in a
red-black tree. Virtual memory areas (VMAs) are tracked with red-black

47
Documentation/scsi/ChangeLog.megaraid_sas
Просмотреть файл

@ -1,3 +1,50 @@
1 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang
2 Current Version : 00.00.04.31-rc1
3 Older Version : 00.00.04.17.1-rc1
1. Add the Online Controller Reset (OCR) to the Driver.
OCR is the new feature for megaraid_sas driver which
will allow the fw to do the chip reset which will not
affact the OS behavious.
To add the OCR support, driver need to do:
a). reset the controller chips -- Xscale and Gen2 which
will change the function calls and add the reset function
related to this two chips.
b). during the reset, driver will store the pending cmds
which not returned by FW to driver's pending queue. Driver
will re-issue those pending cmds again to FW after the OCR
finished.
c). In driver's timeout routine, driver will report to
OS as reset. Also driver's queue routine will block the
cmds until the OCR finished.
d). in Driver's ISR routine, if driver get the FW state as
state change, FW in Failure status and FW support online controller
reset (OCR), driver will start to do the controller reset.
e). In driver's IOCTL routine, the application cmds will wait for the
OCR to finish, then issue the cmds to FW.
f). Before driver kill adapter, driver will do last chance of
OCR to see if driver can bring back the FW.
2. Add the support update flag to the driver to tell LSI megaraid_sas
application which driver will support the device update. So application
will not need to do the device update after application add/del the device
from the system.
3. In driver's timeout routine, driver will do three time reset if fw is in
failed state. Driver will kill adapter if can't bring back FW after the
this three times reset.
4. Add the input parameter max_sectors to 1MB support to our GEN2 controller.
customer can use the input paramenter max_sectors to add 1MB support to GEN2
controller.
1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang

14
Documentation/sysctl/kernel.txt
Просмотреть файл

@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
- core_uses_pid
- ctrl-alt-del
- dentry-state
- dmesg_restrict
- domainname
- hostname
- hotplug
@ -213,6 +214,19 @@ to decide what to do with it.
==============================================================
dmesg_restrict:
This toggle indicates whether unprivileged users are prevented from using
dmesg(8) to view messages from the kernel's log buffer. When
dmesg_restrict is set to (0) there are no restrictions. When
dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
dmesg(8).
The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
value of dmesg_restrict.
==============================================================
domainname & hostname:
These files can be used to set the NIS/YP domainname and the

12
Documentation/sysctl/vm.txt
Просмотреть файл

@ -80,8 +80,10 @@ dirty_background_bytes
Contains the amount of dirty memory at which the pdflush background writeback
daemon will start writeback.
If dirty_background_bytes is written, dirty_background_ratio becomes a function
of its value (dirty_background_bytes / the amount of dirtyable system memory).
Note: dirty_background_bytes is the counterpart of dirty_background_ratio. Only
one of them may be specified at a time. When one sysctl is written it is
immediately taken into account to evaluate the dirty memory limits and the
other appears as 0 when read.
==============================================================
@ -97,8 +99,10 @@ dirty_bytes
Contains the amount of dirty memory at which a process generating disk writes
will itself start writeback.
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
Note: dirty_bytes is the counterpart of dirty_ratio. Only one of them may be
specified at a time. When one sysctl is written it is immediately taken into
account to evaluate the dirty memory limits and the other appears as 0 when
read.
Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
value lower than this limit will be ignored and the old configuration will be

1
Documentation/video4linux/CARDLIST.cx88
Просмотреть файл

@ -83,3 +83,4 @@
82 -> WinFast DTV2000 H rev. J [107d:6f2b]
83 -> Prof 7301 DVB-S/S2 [b034:3034]
84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd]
85 -> Twinhan VP-1027 DVB-S [1822:0023]

3
Documentation/video4linux/CARDLIST.em28xx
Просмотреть файл

@ -31,6 +31,7 @@
30 -> Videology 20K14XUSB USB2.0 (em2820/em2840)
31 -> Usbgear VD204v9 (em2821)
32 -> Supercomp USB 2.0 TV (em2821)
33 -> Elgato Video Capture (em2860) [0fd9:0033]
34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f]
35 -> Typhoon DVD Maker (em2860)
36 -> NetGMBH Cam (em2860)
@ -45,7 +46,7 @@
45 -> Pinnacle PCTV DVB-T (em2870)
46 -> Compro, VideoMate U3 (em2870) [185b:2870]
47 -> KWorld DVB-T 305U (em2880) [eb1a:e305]
48 -> KWorld DVB-T 310U (em2880) [eb1a:e310]
48 -> KWorld DVB-T 310U (em2880)
49 -> MSI DigiVox A/D (em2880) [eb1a:e310]
50 -> MSI DigiVox A/D II (em2880) [eb1a:e320]
51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c]

2
Documentation/video4linux/CARDLIST.saa7134
Просмотреть файл

@ -126,7 +126,7 @@
125 -> Beholder BeholdTV 409 [0000:4090]
126 -> Beholder BeholdTV 505 FM [5ace:5050]
127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090]
128 -> Beholder BeholdTV Columbus TVFM [0000:5201]
128 -> Beholder BeholdTV Columbus TV/FM [0000:5201]
129 -> Beholder BeholdTV 607 FM [5ace:6070]
130 -> Beholder BeholdTV M6 [5ace:6190]
131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022]

1
Documentation/video4linux/bttv/MAKEDEV
Просмотреть файл

@ -19,7 +19,6 @@ function makedev () {
echo "*** new device names ***"
makedev video 0
makedev radio 64
makedev vtx 192
makedev vbi 224
#echo "*** old device names (for compatibility only) ***"

2
Documentation/video4linux/gspca.txt
Просмотреть файл

@ -302,12 +302,14 @@ sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
sonixj 0c45:60fe Microdia Audio
sonixj 0c45:6100 PC Camera (SN9C128)
sonixj 0c45:6102 PC Camera (SN9C128)
sonixj 0c45:610a PC Camera (SN9C128)
sonixj 0c45:610b PC Camera (SN9C128)
sonixj 0c45:610c PC Camera (SN9C128)
sonixj 0c45:610e PC Camera (SN9C128)
sonixj 0c45:6128 Microdia/Sonix SNP325
sonixj 0c45:612a Avant Camera
sonixj 0c45:612b Speed-Link REFLECT2
sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix
sonixj 0c45:6130 Sonix Pccam
sonixj 0c45:6138 Sn9c120 Mo4000

35
Documentation/video4linux/v4l2-framework.txt
Просмотреть файл

@ -44,8 +44,8 @@ All drivers have the following structure:
2) A way of initializing and commanding sub-devices (if any).
3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and
/dev/vtxX) and keeping track of device-node specific data.
3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX)
and keeping track of device-node specific data.
4) Filehandle-specific structs containing per-filehandle data;
@ -192,6 +192,11 @@ You also need a way to go from the low-level struct to v4l2_subdev. For the
common i2c_client struct the i2c_set_clientdata() call is used to store a
v4l2_subdev pointer, for other busses you may have to use other methods.
Bridges might also need to store per-subdev private data, such as a pointer to
bridge-specific per-subdev private data. The v4l2_subdev structure provides
host private data for that purpose that can be accessed with
v4l2_get_subdev_hostdata() and v4l2_set_subdev_hostdata().
From the bridge driver perspective you load the sub-device module and somehow
obtain the v4l2_subdev pointer. For i2c devices this is easy: you call
i2c_get_clientdata(). For other busses something similar needs to be done.
@ -448,6 +453,10 @@ You should also set these fields:
- ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance
(highly recommended to use this and it might become compulsory in the
future!), then set this to your v4l2_ioctl_ops struct.
- lock: leave to NULL if you want to do all the locking in the driver.
Otherwise you give it a pointer to a struct mutex_lock and before any
of the v4l2_file_operations is called this lock will be taken by the
core and released afterwards.
- parent: you only set this if v4l2_device was registered with NULL as
the parent device struct. This only happens in cases where one hardware
device has multiple PCI devices that all share the same v4l2_device core.
@ -464,6 +473,22 @@ If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or
The v4l2_file_operations struct is a subset of file_operations. The main
difference is that the inode argument is omitted since it is never used.
v4l2_file_operations and locking
--------------------------------
You can set a pointer to a mutex_lock in struct video_device. Usually this
will be either a top-level mutex or a mutex per device node. If you want
finer-grained locking then you have to set it to NULL and do you own locking.
If a lock is specified then all file operations will be serialized on that
lock. If you use videobuf then you must pass the same lock to the videobuf
queue initialize function: if videobuf has to wait for a frame to arrive, then
it will temporarily unlock the lock and relock it afterwards. If your driver
also waits in the code, then you should do the same to allow other processes
to access the device node while the first process is waiting for something.
The implementation of a hotplug disconnect should also take the lock before
calling v4l2_device_disconnect.
video_device registration
-------------------------
@ -483,7 +508,6 @@ types exist:
VFL_TYPE_GRABBER: videoX for video input/output devices
VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext)
VFL_TYPE_RADIO: radioX for radio tuners
VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use)
The last argument gives you a certain amount of control over the device
device node number used (i.e. the X in videoX). Normally you will pass -1
@ -547,9 +571,8 @@ from /dev).
After video_unregister_device() returns no new opens can be done. However,
in the case of USB devices some application might still have one of these
device nodes open. So after the unregister all file operations will return
an error as well, except for the ioctl and unlocked_ioctl file operations:
those will still be passed on since some buffer ioctls may still be needed.
device nodes open. So after the unregister all file operations (except
release, of course) will return an error as well.
When the last user of the video device node exits, then the vdev->release()
callback is called and you can do the final cleanup there.

6
Kbuild
Просмотреть файл

@ -53,7 +53,7 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 (\2) /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
@ -95,5 +95,5 @@ PHONY += missing-syscalls
missing-syscalls: scripts/checksyscalls.sh FORCE
$(call cmd,syscalls)
# Delete all targets during make clean
clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))
# Keep these two files during make clean
no-clean-files := $(bounds-file) $(offsets-file)

11
Kconfig Normal file
Просмотреть файл

@ -0,0 +1,11 @@
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/$ARCH $KERNELVERSION Kernel Configuration"
config SRCARCH
string
option env="SRCARCH"
source "arch/$SRCARCH/Kconfig"

53
MAINTAINERS
Просмотреть файл

@ -161,7 +161,7 @@ M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/serial/8250*
F: include/linux/serial_8250.h
@ -432,7 +432,7 @@ AMS (Apple Motion Sensor) DRIVER
M: Stelian Pop <stelian@popies.net>
M: Michael Hanselmann <linux-kernel@hansmi.ch>
S: Supported
F: drivers/hwmon/ams/
F: drivers/macintosh/ams/
AMSO1100 RNIC DRIVER
M: Tom Tucker <tom@opengridcomputing.com>
@ -1391,6 +1391,14 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/tg3.*
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Brett Rudley <brudley@broadcom.com>
M: Henry Ptasinski <henryp@broadcom.com>
M: Nohee Ko <noheek@broadcom.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/staging/brcm80211/
BROCADE BFA FC SCSI DRIVER
M: Jing Huang <huangj@brocade.com>
L: linux-scsi@vger.kernel.org
@ -1605,7 +1613,7 @@ F: drivers/platform/x86/classmate-laptop.c
COCCINELLE/Semantic Patches (SmPL)
M: Julia Lawall <julia@diku.dk>
M: Gilles Muller <Gilles.Muller@lip6.fr>
M: Nicolas Palix <npalix@diku.dk>
M: Nicolas Palix <npalix.work@gmail.com>
L: cocci@diku.dk (moderated for non-subscribers)
W: http://coccinelle.lip6.fr/
S: Supported
@ -1749,6 +1757,7 @@ L: linux-cris-kernel@axis.com
W: http://developer.axis.com
S: Maintained
F: arch/cris/
F: drivers/serial/crisv10.*
CRYPTO API
M: Herbert Xu <herbert@gondor.apana.org.au>
@ -3383,8 +3392,8 @@ F: Documentation/kdump/
KERNEL AUTOMOUNTER (AUTOFS)
M: "H. Peter Anvin" <hpa@zytor.com>
L: autofs@linux.kernel.org
S: Odd Fixes
F: fs/autofs/
S: Obsolete
F: drivers/staging/autofs/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
M: Ian Kent <raven@themaw.net>
@ -4448,7 +4457,7 @@ L: platform-driver-x86@vger.kernel.org
S: Maintained
F: drivers/platform/x86/panasonic-laptop.c
PANASONIC MN10300/AM33 PORT
PANASONIC MN10300/AM33/AM34 PORT
M: David Howells <dhowells@redhat.com>
M: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
L: linux-am33-list@redhat.com (moderated for non-subscribers)
@ -5667,7 +5676,7 @@ S: Maintained
STAGING SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
L: devel@driverdev.osuosl.org
S: Maintained
F: drivers/staging/
@ -5901,7 +5910,7 @@ S: Maintained
TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
@ -6224,7 +6233,7 @@ USB SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
S: Supported
F: Documentation/usb/
F: drivers/net/usb/
@ -6457,6 +6466,12 @@ S: Maintained
F: Documentation/hwmon/w83793
F: drivers/hwmon/w83793.c
W83795 HARDWARE MONITORING DRIVER
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/w83795.c
W83L51xD SD/MMC CARD INTERFACE DRIVER
M: Pierre Ossman <pierre@ossman.eu>
S: Maintained
@ -6581,11 +6596,25 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
S: Maintained
F: drivers/platform/x86
XEN PCI SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
XEN SWIOTLB SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy@xensource.com>
M: Chris Wright <chrisw@sous-sol.org>
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.osdl.org
L: xen-devel@lists.xensource.com
S: Supported
F: arch/x86/xen/
F: drivers/*/xen-*front.c

40
Makefile
Просмотреть файл

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 36
EXTRAVERSION =
SUBLEVEL = 37
EXTRAVERSION = -rc1
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
@ -204,6 +204,9 @@ ifeq ($(ARCH),x86_64)
endif
# Additional ARCH settings for sparc
ifeq ($(ARCH),sparc32)
SRCARCH := sparc
endif
ifeq ($(ARCH),sparc64)
SRCARCH := sparc
endif
@ -1137,21 +1140,13 @@ MRPROPER_FILES += .config .config.old .version .old_version \
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation)
PHONY += $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: archclean $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
clean: archclean
# mrproper - Delete all generated files, including .config
#
@ -1352,16 +1347,7 @@ $(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
$(KBUILD_EXTMOD)/modules.order \
$(KBUILD_EXTMOD)/modules.builtin
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
help:
@echo ' Building external modules.'
@ -1378,6 +1364,16 @@ prepare: ;
scripts: ;
endif # KBUILD_EXTMOD
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
# Generate tags for editors
# ---------------------------------------------------------------------------
quiet_cmd_tags = GEN $@

1
README
Просмотреть файл

@ -166,6 +166,7 @@ CONFIGURING the kernel:
- Alternate configuration commands are:
"make config" Plain text interface.
"make menuconfig" Text based color menus, radiolists & dialogs.
"make nconfig" Enhanced text based color menus.
"make xconfig" X windows (Qt) based configuration tool.
"make gconfig" X windows (Gtk) based configuration tool.
"make oldconfig" Default all questions based on the contents of

14
arch/Kconfig
Просмотреть файл

@ -42,6 +42,20 @@ config KPROBES
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config JUMP_LABEL
bool "Optimize trace point call sites"
depends on HAVE_ARCH_JUMP_LABEL
help
If it is detected that the compiler has support for "asm goto",
the kernel will compile trace point locations with just a
nop instruction. When trace points are enabled, the nop will
be converted to a jump to the trace function. This technique
lowers overhead and stress on the branch prediction of the
processor.
On i386, options added to the compiler flags may increase
the size of the kernel slightly.
config OPTPROBES
def_bool y
depends on KPROBES && HAVE_OPTPROBES

4
arch/alpha/Kconfig
Просмотреть файл

@ -1,7 +1,3 @@
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
config ALPHA
bool
default y

4
arch/alpha/kernel/pci_iommu.c
Просмотреть файл

@ -223,7 +223,7 @@ iommu_arena_free(struct pci_iommu_arena *arena, long ofs, long n)
*/
static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
{
dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
dma_addr_t dac_offset = alpha_mv.pci_dac_offset;
int ok = 1;
/* If this is not set, the machine doesn't support DAC at all. */
@ -756,7 +756,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
spin_lock_irqsave(&arena->lock, flags);
for (end = sg + nents; sg < end; ++sg) {
dma64_addr_t addr;
dma_addr_t addr;
size_t size;
long npages, ofs;
dma_addr_t tend;

7
arch/alpha/kernel/ptrace.c
Просмотреть файл

@ -269,7 +269,8 @@ void ptrace_disable(struct task_struct *child)
user_disable_single_step(child);
}
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
unsigned long tmp;
size_t copied;
@ -292,7 +293,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
case PTRACE_PEEKUSR:
force_successful_syscall_return();
ret = get_reg(child, addr);
DBG(DBG_MEM, ("peek $%ld->%#lx\n", addr, ret));
DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
break;
/* When I and D space are separate, this will have to be fixed. */
@ -302,7 +303,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
case PTRACE_POKEUSR: /* write the specified register */
DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data));
DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
ret = put_reg(child, addr, data);
break;
default:

21
arch/arm/Kconfig
Просмотреть файл

@ -1,10 +1,3 @@
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux Kernel Configuration"
config ARM
bool
default y
@ -13,7 +6,7 @@ config ARM
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
@ -727,9 +720,11 @@ config ARCH_S5PC100
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
@ -740,9 +735,13 @@ config ARCH_S5PV210
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select GENERIC_CLOCKEVENTS
select HAVE_S3C_RTC
select HAVE_S3C2410_I2C
select HAVE_S3C2410_WATCHDOG
help
Samsung S5PV310 series based systems
@ -1669,6 +1668,12 @@ if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_IMX
tristate "CPUfreq driver for i.MX CPUs"
depends on ARCH_MXC && CPU_FREQ
help
This enables the CPUfreq driver for i.MX CPUs.
config CPU_FREQ_SA1100
bool

28
arch/arm/common/gic.c
Просмотреть файл

@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all interrupts.
* Set priority on all global interrupts.
*/
for (i = 0; i < max_irq; i += 4)
for (i = 32; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts.
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 0; i < max_irq; i += 32)
for (i = 32; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
void __iomem *dist_base;
int i;
if (gic_nr >= MAX_GIC_NR)
BUG();
dist_base = gic_data[gic_nr].dist_base;
BUG_ON(!dist_base);
gic_data[gic_nr].cpu_base = base;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}

1
arch/arm/configs/mx51_defconfig
Просмотреть файл

@ -82,6 +82,7 @@ CONFIG_FEC=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_EVBUG=m
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ELANTECH=y

13
arch/arm/include/asm/hardware/cache-l2x0.h
Просмотреть файл

@ -21,9 +21,6 @@
#define __ASM_ARM_HARDWARE_L2X0_H
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
@ -53,6 +50,16 @@
#define L2X0_LINE_DATA 0xF10
#define L2X0_LINE_TAG 0xF30
#define L2X0_DEBUG_CTRL 0xF40
#define L2X0_PREFETCH_CTRL 0xF60
#define L2X0_POWER_CTRL 0xF80
#define L2X0_DYNAMIC_CLK_GATING_EN (1 << 1)
#define L2X0_STNDBY_MODE_EN (1 << 0)
/* Registers shifts and masks */
#define L2X0_CACHE_ID_PART_MASK (0xf << 6)
#define L2X0_CACHE_ID_PART_L210 (1 << 6)
#define L2X0_CACHE_ID_PART_L310 (3 << 6)
#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17)
#ifndef __ASSEMBLY__
extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);

2
arch/arm/include/asm/hardware/it8152.h
Просмотреть файл

@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9

5
arch/arm/include/asm/kgdb.h
Просмотреть файл

@ -70,7 +70,8 @@ extern int kgdb_fault_expected;
#define _GP_REGS 16
#define _FP_REGS 8
#define _EXTRA_REGS 2
#define DBG_MAX_REG_NUM (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
#define DBG_MAX_REG_NUM (_GP_REGS + _FP_REGS + _EXTRA_REGS)
#define KGDB_MAX_NO_CPUS 1
#define BUFMAX 400
@ -93,7 +94,7 @@ extern int kgdb_fault_expected;
#define _SPT 13
#define _LR 14
#define _PC 15
#define _CPSR (DBG_MAX_REG_NUM - 1)
#define _CPSR (GDB_MAX_REGS - 1)
/*
* So that we can denote the end of a frame for tracing,

7
arch/arm/include/asm/memblock.h
Просмотреть файл

@ -1,13 +1,6 @@
#ifndef _ASM_ARM_MEMBLOCK_H
#define _ASM_ARM_MEMBLOCK_H
#ifdef CONFIG_MMU
extern phys_addr_t lowmem_end_addr;
#define MEMBLOCK_REAL_LIMIT lowmem_end_addr
#else
#define MEMBLOCK_REAL_LIMIT 0
#endif
struct meminfo;
struct machine_desc;

24
arch/arm/include/asm/outercache.h
Просмотреть файл

@ -25,6 +25,9 @@ struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
void (*flush_range)(unsigned long, unsigned long);
void (*flush_all)(void);
void (*inv_all)(void);
void (*disable)(void);
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
@ -50,6 +53,24 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
outer_cache.flush_range(start, end);
}
static inline void outer_flush_all(void)
{
if (outer_cache.flush_all)
outer_cache.flush_all();
}
static inline void outer_inv_all(void)
{
if (outer_cache.inv_all)
outer_cache.inv_all();
}
static inline void outer_disable(void)
{
if (outer_cache.disable)
outer_cache.disable();
}
#else
static inline void outer_inv_range(unsigned long start, unsigned long end)
@ -58,6 +79,9 @@ static inline void outer_clean_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_range(unsigned long start, unsigned long end)
{ }
static inline void outer_flush_all(void) { }
static inline void outer_inv_all(void) { }
static inline void outer_disable(void) { }
#endif

3
arch/arm/kernel/hw_breakpoint.c
Просмотреть файл

@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
breakpoint_handler(addr, regs);
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN_ON("Asynchronous watchpoint exception taken. "
"Debugging results may be unreliable");
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, regs);
break;

2
arch/arm/kernel/kgdb.c
Просмотреть файл

@ -79,7 +79,7 @@ sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
return;
/* Initialize to zero */
for (regno = 0; regno < DBG_MAX_REG_NUM; regno++)
for (regno = 0; regno < GDB_MAX_REGS; regno++)
gdb_regs[regno] = 0;
/* Otherwise, we have only some registers from switch_to() */

3
arch/arm/kernel/machine_kexec.c
Просмотреть файл

@ -78,7 +78,10 @@ void machine_kexec(struct kimage *image)
local_fiq_disable();
setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
flush_cache_all();
outer_flush_all();
outer_disable();
cpu_proc_fin();
outer_inv_all();
flush_cache_all();
cpu_reset(reboot_code_buffer_phys);
}

2
arch/arm/kernel/perf_event.c
Просмотреть файл

@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
enum armv7_counters counter)
{
int ret;
int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;

28
arch/arm/kernel/ptrace.c
Просмотреть файл

@ -1075,13 +1075,15 @@ out:
}
#endif
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
long arch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
int ret;
unsigned long __user *datap = (unsigned long __user *) data;
switch (request) {
case PTRACE_PEEKUSR:
ret = ptrace_read_user(child, addr, (unsigned long __user *)data);
ret = ptrace_read_user(child, addr, datap);
break;
case PTRACE_POKEUSR:
@ -1089,34 +1091,34 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
case PTRACE_GETREGS:
ret = ptrace_getregs(child, (void __user *)data);
ret = ptrace_getregs(child, datap);
break;
case PTRACE_SETREGS:
ret = ptrace_setregs(child, (void __user *)data);
ret = ptrace_setregs(child, datap);
break;
case PTRACE_GETFPREGS:
ret = ptrace_getfpregs(child, (void __user *)data);
ret = ptrace_getfpregs(child, datap);
break;
case PTRACE_SETFPREGS:
ret = ptrace_setfpregs(child, (void __user *)data);
ret = ptrace_setfpregs(child, datap);
break;
#ifdef CONFIG_IWMMXT
case PTRACE_GETWMMXREGS:
ret = ptrace_getwmmxregs(child, (void __user *)data);
ret = ptrace_getwmmxregs(child, datap);
break;
case PTRACE_SETWMMXREGS:
ret = ptrace_setwmmxregs(child, (void __user *)data);
ret = ptrace_setwmmxregs(child, datap);
break;
#endif
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value,
(unsigned long __user *) data);
datap);
break;
case PTRACE_SET_SYSCALL:
@ -1126,21 +1128,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
#ifdef CONFIG_CRUNCH
case PTRACE_GETCRUNCHREGS:
ret = ptrace_getcrunchregs(child, (void __user *)data);
ret = ptrace_getcrunchregs(child, datap);
break;
case PTRACE_SETCRUNCHREGS:
ret = ptrace_setcrunchregs(child, (void __user *)data);
ret = ptrace_setcrunchregs(child, datap);
break;
#endif
#ifdef CONFIG_VFP
case PTRACE_GETVFPREGS:
ret = ptrace_getvfpregs(child, (void __user *)data);
ret = ptrace_getvfpregs(child, datap);
break;
case PTRACE_SETVFPREGS:
ret = ptrace_setvfpregs(child, (void __user *)data);
ret = ptrace_setvfpregs(child, datap);
break;
#endif

2
arch/arm/kernel/stacktrace.c
Просмотреть файл

@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)

5
arch/arm/kernel/traps.c
Просмотреть файл

@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
sprint_symbol(sym1, where);
sprint_symbol(sym2, from);
printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif

2
arch/arm/kernel/unwind.c
Просмотреть файл

@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
high = ALIGN(low, THREAD_SIZE);
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp);

1
arch/arm/kernel/vmlinux.lds.S
Просмотреть файл

@ -113,6 +113,7 @@ SECTIONS
*(.rodata.*)
*(.glue_7)
*(.glue_7t)
. = ALIGN(4);
*(.got) /* Global offset table */
ARM_CPU_KEEP(PROC_INFO)
}

111
arch/arm/mach-ep93xx/include/mach/dma.h
Просмотреть файл

@ -1,5 +1,13 @@
/*
* arch/arm/mach-ep93xx/include/mach/dma.h
/**
* DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
*
* The EP93xx DMA M2P subsystem handles DMA transfers between memory and
* peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
* See chapter 10 of the EP93xx users guide for full details on the DMA M2P
* engine.
*
* See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
*
*/
#ifndef __ASM_ARCH_DMA_H
@ -8,12 +16,34 @@
#include <linux/list.h>
#include <linux/types.h>
/**
* struct ep93xx_dma_buffer - Information about a buffer to be transferred
* using the DMA M2P engine
*
* @list: Entry in DMA buffer list
* @bus_addr: Physical address of the buffer
* @size: Size of the buffer in bytes
*/
struct ep93xx_dma_buffer {
struct list_head list;
u32 bus_addr;
u16 size;
};
/**
* struct ep93xx_dma_m2p_client - Information about a DMA M2P client
*
* @name: Unique name for this client
* @flags: Client flags
* @cookie: User data to pass to callback functions
* @buffer_started: Non NULL function to call when a transfer is started.
* The arguments are the user data cookie and the DMA
* buffer which is starting.
* @buffer_finished: Non NULL function to call when a transfer is completed.
* The arguments are the user data cookie, the DMA buffer
* which has completed, and a boolean flag indicating if
* the transfer had an error.
*/
struct ep93xx_dma_m2p_client {
char *name;
u8 flags;
@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
struct ep93xx_dma_buffer *buf,
int bytes, int error);
/* Internal to the DMA code. */
/* private: Internal use only */
void *channel;
};
/* DMA M2P ports */
#define EP93XX_DMA_M2P_PORT_I2S1 0x00
#define EP93XX_DMA_M2P_PORT_I2S2 0x01
#define EP93XX_DMA_M2P_PORT_AAC1 0x02
@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
#define EP93XX_DMA_M2P_PORT_UART3 0x08
#define EP93XX_DMA_M2P_PORT_IRDA 0x09
#define EP93XX_DMA_M2P_PORT_MASK 0x0f
#define EP93XX_DMA_M2P_TX 0x00
#define EP93XX_DMA_M2P_RX 0x10
#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
#define EP93XX_DMA_M2P_ERROR_MASK 0x60
int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
/* DMA M2P client flags */
#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */
#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */
/*
* DMA M2P client error handling flags. See the EP93xx users guide
* documentation on the DMA M2P CONTROL register for more details
*/
#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */
#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */
#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */
/**
* ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
* subsystem
*
* @m2p: Client information to register
* returns 0 on success
*
* The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
* client
*/
int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
/**
* ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
* subsystem
*
* @m2p: Client to unregister
*
* Any transfers currently in progress will be completed in hardware, but
* ignored in software.
*/
void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
/**
* ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
*
* @m2p: DMA Client to submit the transfer on
* @buf: DMA Buffer to submit
*
* If the current or next transfer positions are free on the M2P client then
* the transfer is started immediately. If not, the transfer is added to the
* list of pending transfers. This function must not be called from the
* buffer_finished callback for an M2P channel.
*
*/
void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
/**
* ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
* for an M2P channel
*
* @m2p: DMA Client to submit the transfer on
* @buf: DMA Buffer to submit
*
* This function must only be called from the buffer_finished callback for an
* M2P channel. It is commonly used to add the next transfer in a chained list
* of DMA transfers.
*/
void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
/**
* ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
*
* @m2p: DMA client to flush transfers on
*
* Any transfers currently in progress will be completed in hardware, but
* ignored in software.
*
*/
void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
#endif /* __ASM_ARCH_DMA_H */

8
arch/arm/mach-imx/include/mach/dma-v1.h
Просмотреть файл

@ -27,6 +27,8 @@
#define imx_has_dma_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#include <mach/dma.h>
#define IMX_DMA_CHANNELS 16
#define DMA_MODE_READ 0
@ -96,12 +98,6 @@ int imx_dma_request(int channel, const char *name);
void imx_dma_free(int channel);
enum imx_dma_prio {
DMA_PRIO_HIGH = 0,
DMA_PRIO_MEDIUM = 1,
DMA_PRIO_LOW = 2
};
int imx_dma_request_by_prio(const char *name, enum imx_dma_prio prio);
#endif /* __MACH_DMA_V1_H__ */

38
arch/arm/mach-imx/mach-mx27_3ds.c
Просмотреть файл

@ -23,16 +23,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-mx27.h>
#include <mach/mmc.h>
#include "devices-imx27.h"
#include "devices.h"
#define SD1_EN_GPIO (GPIO_PORTB + 25)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
PE12_PF_UART1_TXD,
@ -58,6 +62,14 @@ static const int mx27pdk_pins[] __initconst = {
PD15_AOUT_FEC_COL,
PD16_AIN_FEC_TX_ER,
PF23_AIN_FEC_TX_EN,
/* SDHC1 */
PE18_PF_SD1_D0,
PE19_PF_SD1_D1,
PE20_PF_SD1_D2,
PE21_PF_SD1_D3,
PE22_PF_SD1_CMD,
PE23_PF_SD1_CLK,
SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
@ -85,13 +97,39 @@ static struct matrix_keymap_data mx27_3ds_keymap_data = {
.keymap_size = ARRAY_SIZE(mx27_3ds_keymap),
};
static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOB(26), data);
}
static struct imxmmc_platform_data sdhc1_pdata = {
.init = mx27_3ds_sdhc1_init,
.exit = mx27_3ds_sdhc1_exit,
};
static void mx27_3ds_sdhc1_enable_level_translator(void)
{
/* Turn on TXB0108 OE pin */
gpio_request(SD1_EN_GPIO, "sd1_enable");
gpio_direction_output(SD1_EN_GPIO, 1);
}
static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
mx27_3ds_sdhc1_enable_level_translator();
imx27_add_imx_uart0(&uart_pdata);
imx27_add_fec(NULL);
mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
}
static void __init mx27pdk_timer_init(void)

2
arch/arm/mach-ixp2000/core.c
Просмотреть файл

@ -197,7 +197,7 @@ unsigned long ixp2000_gettimeoffset (void)
return offset / ticks_per_usec;
}
static int ixp2000_timer_interrupt(int irq, void *dev_id)
static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
{
/* clear timer 1 */
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);

7
arch/arm/mach-kirkwood/common.c
Просмотреть файл

@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
kirkwood_pcie_id(&dev, &rev);
if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
rev == MV88F6281_REV_A1)) ||
(dev == MV88F6282_DEV_ID))
return 200000000;
if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
return 200000000;
return 166666667;
}

2
arch/arm/mach-kirkwood/d2net_v2-setup.c
Просмотреть файл

@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END

14
arch/arm/mach-kirkwood/lacie_v2-common.c
Просмотреть файл

@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
pr_err("Failed to power up HDD%d\n", i + 1);
}
}
/*****************************************************************************
* Timer
****************************************************************************/
static void lacie_v2_timer_init(void)
{
kirkwood_tclk = 166666667;
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
struct sys_timer lacie_v2_timer = {
.init = lacie_v2_timer_init,
};

2
arch/arm/mach-kirkwood/lacie_v2-common.h
Просмотреть файл

@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
void lacie_v2_register_i2c_devices(void);
void lacie_v2_hdd_power_init(int hdd_num);
extern struct sys_timer lacie_v2_timer;
#endif

4
arch/arm/mach-kirkwood/mpp.c
Просмотреть файл

@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
}
printk("\n");
while (*mpp_list) {
for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");

6
arch/arm/mach-kirkwood/netspace_v2-setup.c
Просмотреть файл

@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif

4
arch/arm/mach-kirkwood/netxbig_v2-setup.c
Просмотреть файл

@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif

14
arch/arm/mach-kirkwood/ts41x-setup.c
Просмотреть файл

@ -27,6 +27,10 @@
#include "mpp.h"
#include "tsx1x-common.h"
/* for the PCIe reset workaround */
#include <plat/pcie.h>
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
static int __init ts41x_pci_init(void)
{
if (machine_is_ts41x())
if (machine_is_ts41x()) {
/*
* Without this explicit reset, the PCIe SATA controller
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
kirkwood_pcie_init(KW_PCIE0);
}
return 0;
}

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше