Merge back cpufreq core changes for v4.12.

MAINTAINERS

@@ -3449,6 +3449,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 T:	git git://git.linaro.org/people/vireshk/linux.git (For ARM Updates)
 B:	https://bugzilla.kernel.org
 F:	Documentation/cpu-freq/
+F:	Documentation/devicetree/bindings/cpufreq/
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 F:	tools/testing/selftests/cpufreq/

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -1189,11 +1189,6 @@
 			status = "disabled";
 		};
 
-		cpufreq-cooling {
-			compatible = "stericsson,db8500-cpufreq-cooling";
-			status = "disabled";
-		};
-
 		mcde@a0350000 {
 			compatible = "stericsson,mcde";
 			reg = <0xa0350000 0x1000>, /* MCDE */

drivers/cpufreq/dbx500-cpufreq.c

@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
@@ -18,6 +19,7 @@
 
 static struct cpufreq_frequency_table *freq_table;
 static struct clk *armss_clk;
+static struct thermal_cooling_device *cdev;
 
 static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
 				unsigned int index)
@@ -32,6 +34,22 @@ static int dbx500_cpufreq_init(struct cpufreq_policy *policy)
 	return cpufreq_generic_init(policy, freq_table, 20 * 1000);
 }
 
+static int dbx500_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	if (!IS_ERR(cdev))
+		cpufreq_cooling_unregister(cdev);
+	return 0;
+}
+
+static void dbx500_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	cdev = cpufreq_cooling_register(policy->cpus);
+	if (IS_ERR(cdev))
+		pr_err("Failed to register cooling device %ld\n", PTR_ERR(cdev));
+	else
+		pr_info("Cooling device registered: %s\n", cdev->type);
+}
+
 static struct cpufreq_driver dbx500_cpufreq_driver = {
 	.flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS |
 			CPUFREQ_NEED_INITIAL_FREQ_CHECK,
@@ -39,6 +57,8 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
 	.target_index = dbx500_cpufreq_target,
 	.get    = cpufreq_generic_get,
 	.init   = dbx500_cpufreq_init,
+	.exit  = dbx500_cpufreq_exit,
+	.ready  = dbx500_cpufreq_ready,
 	.name   = "DBX500",
 	.attr   = cpufreq_generic_attr,
 };

drivers/cpufreq/mt8173-cpufreq.c

@@ -573,14 +573,33 @@ static struct platform_driver mt8173_cpufreq_platdrv = {
 	.probe		= mt8173_cpufreq_probe,
 };
 
-static int mt8173_cpufreq_driver_init(void)
+/* List of machines supported by this driver */
+static const struct of_device_id mt8173_cpufreq_machines[] __initconst = {
+	{ .compatible = "mediatek,mt817x", },
+	{ .compatible = "mediatek,mt8173", },
+	{ .compatible = "mediatek,mt8176", },
+
+	{ }
+};
+
+static int __init mt8173_cpufreq_driver_init(void)
 {
+	struct device_node *np;
+	const struct of_device_id *match;
 	struct platform_device *pdev;
 	int err;
 
-	if (!of_machine_is_compatible("mediatek,mt8173"))
+	np = of_find_node_by_path("/");
+	if (!np)
 		return -ENODEV;
 
+	match = of_match_node(mt8173_cpufreq_machines, np);
+	of_node_put(np);
+	if (!match) {
+		pr_warn("Machine is not compatible with mt8173-cpufreq\n");
+		return -ENODEV;
+	}
+
 	err = platform_driver_register(&mt8173_cpufreq_platdrv);
 	if (err)
 		return err;

drivers/cpufreq/qoriq-cpufreq.c

@@ -52,17 +52,27 @@ static u32 get_bus_freq(void)
 {
 	struct device_node *soc;
 	u32 sysfreq;
+	struct clk *pltclk;
+	int ret;
 
+	/* get platform freq by searching bus-frequency property */
 	soc = of_find_node_by_type(NULL, "soc");
-	if (!soc)
-		return 0;
+	if (soc) {
+		ret = of_property_read_u32(soc, "bus-frequency", &sysfreq);
+		of_node_put(soc);
+		if (!ret)
+			return sysfreq;
+	}
 
-	if (of_property_read_u32(soc, "bus-frequency", &sysfreq))
-		sysfreq = 0;
+	/* get platform freq by its clock name */
+	pltclk = clk_get(NULL, "cg-pll0-div1");
+	if (IS_ERR(pltclk)) {
+		pr_err("%s: can't get bus frequency %ld\n",
+		       __func__, PTR_ERR(pltclk));
+		return PTR_ERR(pltclk);
+	}
 
-	of_node_put(soc);
-
-	return sysfreq;
+	return clk_get_rate(pltclk);
 }
 
 static struct clk *cpu_to_clk(int cpu)

drivers/thermal/Kconfig

@@ -291,18 +291,6 @@ config ARMADA_THERMAL
 	  Enable this option if you want to have support for thermal management
 	  controller present in Armada 370 and Armada XP SoC.
 
-config DB8500_CPUFREQ_COOLING
-	tristate "DB8500 cpufreq cooling"
-	depends on ARCH_U8500 || COMPILE_TEST
-	depends on HAS_IOMEM
-	depends on CPU_THERMAL
-	default y
-	help
-	  Adds DB8500 cpufreq cooling devices, and these cooling devices can be
-	  bound to thermal zone trip points. When a trip point reached, the
-	  bound cpufreq cooling device turns active to set CPU frequency low to
-	  cool down the CPU.
-
 config INTEL_POWERCLAMP
 	tristate "Intel PowerClamp idle injection driver"
 	depends on THERMAL

drivers/thermal/Makefile

@@ -41,7 +41,6 @@ obj-$(CONFIG_TANGO_THERMAL)	+= tango_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
 obj-$(CONFIG_MAX77620_THERMAL)	+= max77620_thermal.o
 obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
-obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
 obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE)	+= intel_soc_dts_iosf.o

drivers/thermal/db8500_cpufreq_cooling.c

@@ -1,105 +0,0 @@
-/*
- * db8500_cpufreq_cooling.c - DB8500 cpufreq works as cooling device.
- *
- * Copyright (C) 2012 ST-Ericsson
- * Copyright (C) 2012 Linaro Ltd.
- *
- * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/cpu_cooling.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-static int db8500_cpufreq_cooling_probe(struct platform_device *pdev)
-{
-	struct thermal_cooling_device *cdev;
-
-	cdev = cpufreq_cooling_register(cpu_present_mask);
-	if (IS_ERR(cdev)) {
-		int ret = PTR_ERR(cdev);
-
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Failed to register cooling device %d\n",
-				ret);
-				
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, cdev);
-
-	dev_info(&pdev->dev, "Cooling device registered: %s\n",	cdev->type);
-
-	return 0;
-}
-
-static int db8500_cpufreq_cooling_remove(struct platform_device *pdev)
-{
-	struct thermal_cooling_device *cdev = platform_get_drvdata(pdev);
-
-	cpufreq_cooling_unregister(cdev);
-
-	return 0;
-}
-
-static int db8500_cpufreq_cooling_suspend(struct platform_device *pdev,
-		pm_message_t state)
-{
-	return -ENOSYS;
-}
-
-static int db8500_cpufreq_cooling_resume(struct platform_device *pdev)
-{
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id db8500_cpufreq_cooling_match[] = {
-	{ .compatible = "stericsson,db8500-cpufreq-cooling" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, db8500_cpufreq_cooling_match);
-#endif
-
-static struct platform_driver db8500_cpufreq_cooling_driver = {
-	.driver = {
-		.name = "db8500-cpufreq-cooling",
-		.of_match_table = of_match_ptr(db8500_cpufreq_cooling_match),
-	},
-	.probe = db8500_cpufreq_cooling_probe,
-	.suspend = db8500_cpufreq_cooling_suspend,
-	.resume = db8500_cpufreq_cooling_resume,
-	.remove = db8500_cpufreq_cooling_remove,
-};
-
-static int __init db8500_cpufreq_cooling_init(void)
-{
-	return platform_driver_register(&db8500_cpufreq_cooling_driver);
-}
-
-static void __exit db8500_cpufreq_cooling_exit(void)
-{
-	platform_driver_unregister(&db8500_cpufreq_cooling_driver);
-}
-
-/* Should be later than db8500_cpufreq_register */
-late_initcall(db8500_cpufreq_cooling_init);
-module_exit(db8500_cpufreq_cooling_exit);
-
-MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@stericsson.com>");
-MODULE_DESCRIPTION("DB8500 cpufreq cooling driver");
-MODULE_LICENSE("GPL");