b43: N-PHY: implement enabling TX power control

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/phy_n.c

@@ -248,15 +248,25 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 {
 	struct b43_phy_n *nphy = dev->phy.n;
 	u8 i;
-	u16 tmp;
+	u16 bmask, val, tmp;
+	enum ieee80211_band band = b43_current_band(dev->wl);
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
 
 	nphy->txpwrctrl = enable;
 	if (!enable) {
-		if (dev->phy.rev >= 3)
+		if (dev->phy.rev >= 3 &&
-			; /* TODO */
+		    (b43_phy_read(dev, B43_NPHY_TXPCTL_CMD) &
+		     (B43_NPHY_TXPCTL_CMD_COEFF |
+		      B43_NPHY_TXPCTL_CMD_HWPCTLEN |
+		      B43_NPHY_TXPCTL_CMD_PCTLEN))) {
+			/* We disable enabled TX pwr ctl, save it's state */
+			nphy->tx_pwr_idx[0] = b43_phy_read(dev,
+						B43_NPHY_C1_TXPCTL_STAT) & 0x7f;
+			nphy->tx_pwr_idx[1] = b43_phy_read(dev,
+						B43_NPHY_C2_TXPCTL_STAT) & 0x7f;
+		}
 
 		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x6840);
 		for (i = 0; i < 84; i++)
@@ -285,10 +295,68 @@ static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
 			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
 				~B43_NPHY_BPHY_CTL3_SCALE, 0x5A);
 
-		if (dev->phy.rev < 2 && 0)
+		if (dev->phy.rev < 2 && dev->phy.is_40mhz)
-			; /* TODO */
+			b43_hf_write(dev, b43_hf_read(dev) | B43_HF_TSSIRPSMW);
 	} else {
-		b43err(dev->wl, "enabling tx pwr ctrl not implemented yet\n");
+		b43_ntab_write_bulk(dev, B43_NTAB16(26, 64), 84,
+				    nphy->adj_pwr_tbl);
+		b43_ntab_write_bulk(dev, B43_NTAB16(27, 64), 84,
+				    nphy->adj_pwr_tbl);
+
+		bmask = B43_NPHY_TXPCTL_CMD_COEFF |
+			B43_NPHY_TXPCTL_CMD_HWPCTLEN;
+		/* wl does useless check for "enable" param here */
+		val = B43_NPHY_TXPCTL_CMD_COEFF | B43_NPHY_TXPCTL_CMD_HWPCTLEN;
+		if (dev->phy.rev >= 3) {
+			bmask |= B43_NPHY_TXPCTL_CMD_PCTLEN;
+			if (val)
+				val |= B43_NPHY_TXPCTL_CMD_PCTLEN;
+		}
+		b43_phy_maskset(dev, B43_NPHY_TXPCTL_CMD, ~(bmask), val);
+
+		if (band == IEEE80211_BAND_5GHZ) {
+			b43_phy_maskset(dev, B43_NPHY_TXPCTL_CMD,
+					~B43_NPHY_TXPCTL_CMD_INIT, 0x64);
+			if (dev->phy.rev > 1)
+				b43_phy_maskset(dev, B43_NPHY_TXPCTL_INIT,
+						~B43_NPHY_TXPCTL_INIT_PIDXI1,
+						0x64);
+		}
+
+		if (dev->phy.rev >= 3) {
+			if (nphy->tx_pwr_idx[0] != 128 &&
+			    nphy->tx_pwr_idx[1] != 128) {
+				/* Recover TX pwr ctl state */
+				b43_phy_maskset(dev, B43_NPHY_TXPCTL_CMD,
+						~B43_NPHY_TXPCTL_CMD_INIT,
+						nphy->tx_pwr_idx[0]);
+				if (dev->phy.rev > 1)
+					b43_phy_maskset(dev,
+						B43_NPHY_TXPCTL_INIT,
+						~0xff, nphy->tx_pwr_idx[1]);
+			}
+		}
+
+		if (dev->phy.rev >= 3) {
+			b43_phy_mask(dev, B43_NPHY_AFECTL_OVER1, ~0x100);
+			b43_phy_mask(dev, B43_NPHY_AFECTL_OVER, ~0x100);
+		} else {
+			b43_phy_mask(dev, B43_NPHY_AFECTL_OVER, ~0x4000);
+		}
+
+		if (dev->phy.rev == 2)
+			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, ~0xFF, 0x3b);
+		else if (dev->phy.rev < 2)
+			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3, ~0xFF, 0x40);
+
+		if (dev->phy.rev < 2 && dev->phy.is_40mhz)
+			b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_TSSIRPSMW);
+
+		if ((nphy->ipa2g_on && band == IEEE80211_BAND_2GHZ) ||
+		    (nphy->ipa5g_on && band == IEEE80211_BAND_5GHZ)) {
+			b43_phy_mask(dev, B43_NPHY_PAPD_EN0, ~0x4);
+			b43_phy_mask(dev, B43_NPHY_PAPD_EN1, ~0x4);
+		}
 	}
 
 	if (nphy->hang_avoid)
@@ -3918,6 +3986,10 @@ static void b43_nphy_op_prepare_structs(struct b43_wldev *dev)
 	nphy->txrx_chain = 2; /* sth different than 0 and 1 for now */
 	nphy->phyrxchain = 3; /* to avoid b43_nphy_set_rx_core_state like wl */
 	nphy->perical = 2; /* avoid additional rssi cal on init (like wl) */
+	/* 128 can mean disabled-by-default state of TX pwr ctl. Max value is
+	 * 0x7f == 127 and we check for 128 when restoring TX pwr ctl. */
+	nphy->tx_pwr_idx[0] = 128;
+	nphy->tx_pwr_idx[1] = 128;
 }
 
 static void b43_nphy_op_free(struct b43_wldev *dev)

drivers/net/wireless/b43/phy_n.h

@@ -783,6 +783,8 @@ struct b43_phy_n {
 	u16 mphase_txcal_bestcoeffs[11];
 
 	bool txpwrctrl;
+	u8 tx_pwr_idx[2];
+	u16 adj_pwr_tbl[84];
 	u16 txcal_bbmult;
 	u16 txiqlocal_bestc[11];
 	bool txiqlocal_coeffsvalid;