mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.

Add support for eMMC hardware reset for BYT eMMC.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Adrian Hunter 2013-06-13 11:50:26 +03:00 коммит произвёл Chris Ball
Родитель eede2111c5
Коммит c9faff6cbb
1 изменённых файлов: 30 добавлений и 2 удалений

Просмотреть файл

@ -77,6 +77,8 @@ struct sdhci_pci_slot {
int rst_n_gpio;
int cd_gpio;
int cd_irq;
void (*hw_reset)(struct sdhci_host *host);
};
struct sdhci_pci_chip {
@ -307,10 +309,27 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = {
.probe_slot = pch_hc_probe_slot,
};
static void sdhci_pci_int_hw_reset(struct sdhci_host *host)
{
u8 reg;
reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
reg |= 0x10;
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
/* For eMMC, minimum is 1us but give it 9us for good measure */
udelay(9);
reg &= ~0x10;
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
/* For eMMC, minimum is 200us but give it 300us for good measure */
usleep_range(300, 1000);
}
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
MMC_CAP_HW_RESET;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
return 0;
}
@ -1016,7 +1035,7 @@ static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
return 0;
}
static void sdhci_pci_hw_reset(struct sdhci_host *host)
static void sdhci_pci_gpio_hw_reset(struct sdhci_host *host)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
int rst_n_gpio = slot->rst_n_gpio;
@ -1031,6 +1050,14 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)
usleep_range(300, 1000);
}
static void sdhci_pci_hw_reset(struct sdhci_host *host)
{
struct sdhci_pci_slot *slot = sdhci_priv(host);
if (slot->hw_reset)
slot->hw_reset(host);
}
static const struct sdhci_ops sdhci_pci_ops = {
.enable_dma = sdhci_pci_enable_dma,
.platform_bus_width = sdhci_pci_bus_width,
@ -1328,6 +1355,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
if (!gpio_request(slot->rst_n_gpio, "eMMC_reset")) {
gpio_direction_output(slot->rst_n_gpio, 1);
slot->host->mmc->caps |= MMC_CAP_HW_RESET;
slot->hw_reset = sdhci_pci_gpio_hw_reset;
} else {
dev_warn(&pdev->dev, "failed to request rst_n_gpio\n");
slot->rst_n_gpio = -EINVAL;