mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.
Add support for eMMC hardware reset for BYT eMMC. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
This commit is contained in:
Родитель
eede2111c5
Коммит
c9faff6cbb
|
@ -77,6 +77,8 @@ struct sdhci_pci_slot {
|
|||
int rst_n_gpio;
|
||||
int cd_gpio;
|
||||
int cd_irq;
|
||||
|
||||
void (*hw_reset)(struct sdhci_host *host);
|
||||
};
|
||||
|
||||
struct sdhci_pci_chip {
|
||||
|
@ -307,10 +309,27 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = {
|
|||
.probe_slot = pch_hc_probe_slot,
|
||||
};
|
||||
|
||||
static void sdhci_pci_int_hw_reset(struct sdhci_host *host)
|
||||
{
|
||||
u8 reg;
|
||||
|
||||
reg = sdhci_readb(host, SDHCI_POWER_CONTROL);
|
||||
reg |= 0x10;
|
||||
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
|
||||
/* For eMMC, minimum is 1us but give it 9us for good measure */
|
||||
udelay(9);
|
||||
reg &= ~0x10;
|
||||
sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
|
||||
/* For eMMC, minimum is 200us but give it 300us for good measure */
|
||||
usleep_range(300, 1000);
|
||||
}
|
||||
|
||||
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
|
||||
{
|
||||
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE;
|
||||
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
|
||||
MMC_CAP_HW_RESET;
|
||||
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
|
||||
slot->hw_reset = sdhci_pci_int_hw_reset;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -1016,7 +1035,7 @@ static int sdhci_pci_bus_width(struct sdhci_host *host, int width)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void sdhci_pci_hw_reset(struct sdhci_host *host)
|
||||
static void sdhci_pci_gpio_hw_reset(struct sdhci_host *host)
|
||||
{
|
||||
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
||||
int rst_n_gpio = slot->rst_n_gpio;
|
||||
|
@ -1031,6 +1050,14 @@ static void sdhci_pci_hw_reset(struct sdhci_host *host)
|
|||
usleep_range(300, 1000);
|
||||
}
|
||||
|
||||
static void sdhci_pci_hw_reset(struct sdhci_host *host)
|
||||
{
|
||||
struct sdhci_pci_slot *slot = sdhci_priv(host);
|
||||
|
||||
if (slot->hw_reset)
|
||||
slot->hw_reset(host);
|
||||
}
|
||||
|
||||
static const struct sdhci_ops sdhci_pci_ops = {
|
||||
.enable_dma = sdhci_pci_enable_dma,
|
||||
.platform_bus_width = sdhci_pci_bus_width,
|
||||
|
@ -1328,6 +1355,7 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
|
|||
if (!gpio_request(slot->rst_n_gpio, "eMMC_reset")) {
|
||||
gpio_direction_output(slot->rst_n_gpio, 1);
|
||||
slot->host->mmc->caps |= MMC_CAP_HW_RESET;
|
||||
slot->hw_reset = sdhci_pci_gpio_hw_reset;
|
||||
} else {
|
||||
dev_warn(&pdev->dev, "failed to request rst_n_gpio\n");
|
||||
slot->rst_n_gpio = -EINVAL;
|
||||
|
|
Загрузка…
Ссылка в новой задаче