diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet index cbbe5587c78d..78bc1c1b04e5 100644 --- a/Documentation/arm/SA1100/Assabet +++ b/Documentation/arm/SA1100/Assabet @@ -26,7 +26,7 @@ Installing a bootloader A couple of bootloaders able to boot Linux on Assabet are available: -BLOB (http://www.lart.tudelft.nl/lartware/blob/) +BLOB (http://www.lartmaker.nl/lartware/blob/) BLOB is a bootloader used within the LART project. Some contributed patches were merged into BLOB to add support for Assabet. diff --git a/Documentation/arm/SA1100/LART b/Documentation/arm/SA1100/LART index 2f73f513e16a..6d412b685598 100644 --- a/Documentation/arm/SA1100/LART +++ b/Documentation/arm/SA1100/LART @@ -11,4 +11,4 @@ is under development, with plenty of others in different stages of planning. The hardware designs for this board have been released under an open license; -see the LART page at http://www.lart.tudelft.nl/ for more information. +see the LART page at http://www.lartmaker.nl/ for more information. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9731b3f826ab..ba46d779ede7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -153,6 +153,12 @@ config ARCH_IXP2000 help Support for Intel's IXP2400/2800 (XScale) family of processors. +config ARCH_IXP23XX + bool "IXP23XX-based" + select PCI + help + Support for Intel's IXP23xx (XScale) family of processors. + config ARCH_L7200 bool "LinkUp-L7200" select FIQ @@ -274,6 +280,8 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-ixp2000/Kconfig" +source "arch/arm/mach-ixp23xx/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" @@ -792,7 +800,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || ARCH_IXP23XX source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 99c0d323719a..ce3e804ea0f3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -57,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) @@ -97,6 +98,7 @@ endif machine-$(CONFIG_ARCH_IOP3XX) := iop3xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 + machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 35ffe0f4ece7..2adc1527e0eb 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -50,10 +50,6 @@ ifeq ($(CONFIG_ARCH_AT91RM9200),y) OBJS += head-at91rm9200.o endif -ifeq ($(CONFIG_DEBUG_ICEDCC),y) -OBJS += ice-dcc.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) OBJS += big-endian.o endif diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S deleted file mode 100644 index 104377a199bb..000000000000 --- a/arch/arm/boot/compressed/ice-dcc.S +++ /dev/null @@ -1,17 +0,0 @@ - - - .text - - .global icedcc_putc - -icedcc_putc: - mov r2, #0x4000000 -1: - subs r2, r2, #1 - movlt pc, r14 - mrc p14, 0, r1, c0, c0, 0 - tst r1, #2 - bne 1b - - mcr p14, 0, r0, c1, c0, 0 - mov pc, r14 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 5ab94584baee..0af3772efcb7 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -20,24 +20,45 @@ unsigned int __machine_arch_type; #include -#include - #ifdef STANDALONE_DEBUG #define putstr printf -#endif +#else + +static void putstr(const char *ptr); + +#include +#include #ifdef CONFIG_DEBUG_ICEDCC -#define putstr icedcc_putstr -#define putc icedcc_putc - -extern void icedcc_putc(int ch); - -static void -icedcc_putstr(const char *ptr) +static void icedcc_putc(int ch) { - for (; *ptr != '\0'; ptr++) { - icedcc_putc(*ptr); + int status, i = 0x4000000; + + do { + if (--i < 0) + return; + + asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); + } while (status & 2); + + asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch)); +} + +#define putc(ch) icedcc_putc(ch) +#define flush() do { } while (0) +#endif + +static void putstr(const char *ptr) +{ + char c; + + while ((c = *ptr++) != '\0') { + if (c == '\n') + putc('\r'); + putc(c); } + + flush(); } #endif diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig new file mode 100644 index 000000000000..1a2751e9ab05 --- /dev/null +++ b/arch/arm/configs/ixp23xx_defconfig @@ -0,0 +1,1302 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Tue Mar 21 03:27:20 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +CONFIG_ARCH_IXP23XX=y +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP23xx Implementation Options +# + +# +# IXP23xx Platforms +# +CONFIG_MACH_ESPRESSO=y +CONFIG_MACH_IXDP2351=y +CONFIG_MACH_ROADRUNNER=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BIG_ENDIAN=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +CONFIG_WAN=y +# CONFIG_DSCC4 is not set +# CONFIG_LANMEDIA is not set +# CONFIG_SYNCLINK_SYNCPPP is not set +CONFIG_HDLC=y +CONFIG_HDLC_RAW=y +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=y +CONFIG_HDLC_FR=y +CONFIG_HDLC_PPP=y + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300 is not set +# CONFIG_FARSYNC is not set +CONFIG_DLCI=y +CONFIG_DLCI_COUNT=24 +CONFIG_DLCI_MAX=8 +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 391f3ab3ff32..7b726b627ea5 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -18,7 +18,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ # the code in uaccess.S is not preemption safe and # probably faster on ARMv3 only -ifeq ($CONFIG_PREEMPT,y) +ifeq ($(CONFIG_PREEMPT),y) lib-y += copy_from_user.o copy_to_user.o else ifneq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig new file mode 100644 index 000000000000..982670ec3866 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Kconfig @@ -0,0 +1,25 @@ +if ARCH_IXP23XX + +config ARCH_SUPPORTS_BIG_ENDIAN + bool + default y + +menu "Intel IXP23xx Implementation Options" + +comment "IXP23xx Platforms" + +config MACH_ESPRESSO + bool "Support IP Fabrics Double Espresso platform" + help + +config MACH_IXDP2351 + bool "Support Intel IXDP2351 platform" + help + +config MACH_ROADRUNNER + bool "Support ADI RoadRunner platform" + help + +endmenu + +endif diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile new file mode 100644 index 000000000000..288b371b6d03 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o pci.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_ESPRESSO) += espresso.o +obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o +obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot new file mode 100644 index 000000000000..d5561ad15bad --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c new file mode 100644 index 000000000000..092ee12ced42 --- /dev/null +++ b/arch/arm/mach-ixp23xx/core.c @@ -0,0 +1,431 @@ +/* + * arch/arm/mach-ixp23xx/core.c + * + * Core routines for IXP23xx chips + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +/************************************************************************* + * Chip specific mappings shared by all IXP23xx systems + *************************************************************************/ +static struct map_desc ixp23xx_io_desc[] __initdata = { + { /* XSI-CPP CSRs */ + .virtual = IXP23XX_XSI2CPP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), + .length = IXP23XX_XSI2CPP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* Expansion Bus Config */ + .virtual = IXP23XX_EXP_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), + .length = IXP23XX_EXP_CFG_SIZE, + .type = MT_DEVICE, + }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ + .virtual = IXP23XX_PERIPHERAL_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), + .length = IXP23XX_PERIPHERAL_SIZE, + .type = MT_DEVICE, + }, { /* CAP CSRs */ + .virtual = IXP23XX_CAP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), + .length = IXP23XX_CAP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* MSF CSRs */ + .virtual = IXP23XX_MSF_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), + .length = IXP23XX_MSF_CSR_SIZE, + .type = MT_DEVICE, + }, { /* PCI I/O Space */ + .virtual = IXP23XX_PCI_IO_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), + .length = IXP23XX_PCI_IO_SIZE, + .type = MT_DEVICE, + }, { /* PCI Config Space */ + .virtual = IXP23XX_PCI_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), + .length = IXP23XX_PCI_CFG_SIZE, + .type = MT_DEVICE, + }, { /* PCI local CFG CSRs */ + .virtual = IXP23XX_PCI_CREG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), + .length = IXP23XX_PCI_CREG_SIZE, + .type = MT_DEVICE, + }, { /* PCI MEM Space */ + .virtual = IXP23XX_PCI_MEM_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), + .length = IXP23XX_PCI_MEM_SIZE, + .type = MT_DEVICE, + } +}; + +void __init ixp23xx_map_io(void) +{ + iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); +} + + +/*************************************************************************** + * IXP23xx Interrupt Handling + ***************************************************************************/ +enum ixp23xx_irq_type { + IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE +}; + +static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); + +static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + u32 int_style; + enum ixp23xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only GPIOs 6-15 are wired to interrupts on IXP23xx + */ + if (line < 6 || line > 15) + return -EINVAL; + + switch (type) { + case IRQT_BOTHEDGE: + int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_RISING: + int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_FALLING: + int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_HIGH: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP23XX_IRQ_LEVEL; + break; + case IRQT_LOW: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP23XX_IRQ_LEVEL; + break; + default: + return -EINVAL; + } + + ixp23xx_config_irq(irq, irq_type); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; + } + + /* + * Clear pending interrupts + */ + *IXP23XX_GPIO_GPISR = (1 << line); + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << + (line * IXP23XX_GPIO_STYLE_SIZE)); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); + + return 0; +} + +static void ixp23xx_irq_mask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg &= ~(1 << (irq % 32)); +} + +static void ixp23xx_irq_ack(unsigned int irq) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + + if ((line < 6) || (line > 15)) + return; + + *IXP23XX_GPIO_GPISR = (1 << line); +} + +/* + * Level triggered interrupts on GPIO lines can only be cleared when the + * interrupt condition disappears. + */ +static void ixp23xx_irq_level_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + ixp23xx_irq_ack(irq); + + *intr_reg |= (1 << (irq % 32)); +} + +static void ixp23xx_irq_edge_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg |= (1 << (irq % 32)); +} + +static struct irqchip ixp23xx_irq_level_chip = { + .ack = ixp23xx_irq_mask, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_level_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static struct irqchip ixp23xx_irq_edge_chip = { + .ack = ixp23xx_irq_ack, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_edge_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static void ixp23xx_pci_irq_mask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +static void ixp23xx_pci_irq_unmask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +/* + * TODO: Should this just be done at ASM level? + */ +static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u32 pci_interrupt; + unsigned int irqno; + struct irqdesc *int_desc; + + pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; + + desc->chip->ack(irq); + + /* See which PCI_INTA, or PCI_INTB interrupted */ + if (pci_interrupt & (1 << 26)) { + irqno = IRQ_IXP23XX_INTB; + } else if (pci_interrupt & (1 << 27)) { + irqno = IRQ_IXP23XX_INTA; + } else { + BUG(); + } + + int_desc = irq_desc + irqno; + int_desc->handle(irqno, int_desc, regs); + + desc->chip->unmask(irq); +} + +static struct irqchip ixp23xx_pci_irq_chip = { + .ack = ixp23xx_pci_irq_mask, + .mask = ixp23xx_pci_irq_mask, + .unmask = ixp23xx_pci_irq_unmask +}; + +static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) +{ + switch (type) { + case IXP23XX_IRQ_LEVEL: + set_irq_chip(irq, &ixp23xx_irq_level_chip); + set_irq_handler(irq, do_level_IRQ); + break; + case IXP23XX_IRQ_EDGE: + set_irq_chip(irq, &ixp23xx_irq_edge_chip); + set_irq_handler(irq, do_edge_IRQ); + break; + } + set_irq_flags(irq, IRQF_VALID); +} + +void __init ixp23xx_init_irq(void) +{ + int irq; + + /* Route everything to IRQ */ + *IXP23XX_INTR_SEL1 = 0x0; + *IXP23XX_INTR_SEL2 = 0x0; + *IXP23XX_INTR_SEL3 = 0x0; + *IXP23XX_INTR_SEL4 = 0x0; + + /* Mask all sources */ + *IXP23XX_INTR_EN1 = 0x0; + *IXP23XX_INTR_EN2 = 0x0; + *IXP23XX_INTR_EN3 = 0x0; + *IXP23XX_INTR_EN4 = 0x0; + + /* + * Configure all IRQs for level-sensitive operation + */ + for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { + ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); + } + + for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { + set_irq_chip(irq, &ixp23xx_pci_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); +} + + +/************************************************************************* + * Timer-tick functions for IXP23xx + *************************************************************************/ +#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC) + +static unsigned long next_jiffy_time; + +static unsigned long +ixp23xx_gettimeoffset(void) +{ + unsigned long elapsed; + + elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); + + return elapsed / CLOCK_TICKS_PER_USEC; +} + +static irqreturn_t +ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) { + timer_tick(regs); + next_jiffy_time += LATCH; + } + + return IRQ_HANDLED; +} + +static struct irqaction ixp23xx_timer_irq = { + .name = "IXP23xx Timer Tick", + .handler = ixp23xx_timer_interrupt, + .flags = SA_INTERRUPT | SA_TIMER, +}; + +void __init ixp23xx_init_timer(void) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + + /* Setup the Timer counter value */ + *IXP23XX_TIMER1_RELOAD = + (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; + + *IXP23XX_TIMER_CONT = 0; + next_jiffy_time = LATCH; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); +} + +struct sys_timer ixp23xx_timer = { + .init = ixp23xx_init_timer, + .offset = ixp23xx_gettimeoffset, +}; + + +/************************************************************************* + * IXP23xx Platform Initializaion + *************************************************************************/ +static struct resource ixp23xx_uart_resources[] = { + { + .start = IXP23XX_UART1_PHYS, + .end = IXP23XX_UART1_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, { + .start = IXP23XX_UART2_PHYS, + .end = IXP23XX_UART2_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port ixp23xx_uart_data[] = { + { + .mapbase = IXP23XX_UART1_PHYS, + .membase = (char *)(IXP23XX_UART1_VIRT + 3), + .irq = IRQ_IXP23XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, { + .mapbase = IXP23XX_UART2_PHYS, + .membase = (char *)(IXP23XX_UART2_VIRT + 3), + .irq = IRQ_IXP23XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device ixp23xx_uart = { + .name = "serial8250", + .id = 0, + .dev.platform_data = ixp23xx_uart_data, + .num_resources = 2, + .resource = ixp23xx_uart_resources, +}; + +static struct platform_device *ixp23xx_devices[] __initdata = { + &ixp23xx_uart, +}; + +void __init ixp23xx_sys_init(void) +{ + platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); +} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c new file mode 100644 index 000000000000..2327c9790416 --- /dev/null +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ixp23xx/espresso.c + * + * Double Espresso-specific routines + * + * Author: Lennert Buytenhek + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static void __init espresso_init(void) +{ + physmap_configure(0x90000000, 0x02000000, 2, NULL); + + /* + * Mark flash as writeable. + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") + /* Maintainer: Lennert Buytenhek */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = espresso_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c new file mode 100644 index 000000000000..00146c35daac --- /dev/null +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-ixp23xx/ixdp2351.c + * + * IXDP2351 board-specific routines + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * IXDP2351 Interrupt Handling + */ +static void ixdp2351_inta_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; + int i; + + desc->chip->mask(irq); + + for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_inta_chip = { + .ack = ixdp2351_inta_mask, + .mask = ixdp2351_inta_mask, + .unmask = ixdp2351_inta_unmask +}; + +static void ixdp2351_intb_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; + int i; + + desc->chip->ack(irq); + + for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_intb_chip = { + .ack = ixdp2351_intb_mask, + .mask = ixdp2351_intb_mask, + .unmask = ixdp2351_intb_unmask +}; + +void ixdp2351_init_irq(void) +{ + int irq; + + /* Mask all interrupts from CPLD, disable simulation */ + *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTA_SIM_REG = 0; + *IXDP2351_CPLD_INTB_SIM_REG = 0; + + ixp23xx_init_irq(); + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); + irq++) { + if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_inta_chip); + } + } + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); + irq++) { + if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_intb_chip); + } + } + + set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler); + set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler); +} + +/* + * IXDP2351 PCI + */ + +/* + * This board does not do normal PCI IRQ routing, or any + * sort of swizzling, so we just need to check where on the + * bus the device is and figure out what CPLD pin it is + * being routed to. + */ +#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) + +static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + u8 bus = dev->bus->number; + u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); + struct pci_bus *tmp_bus = dev->bus; + + /* Primary bus, no interrupts here */ + if (!bus) + return -1; + + /* Lookup first leaf in bus tree */ + while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) + tmp_bus = tmp_bus->parent; + + /* Select between known bridges */ + switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { + /* Device is located after first bridge */ + case 0x0008: + if (tmp_bus == dev->bus) { + /* Device is located directy after first bridge */ + switch (devpin) { + /* Onboard 82546 */ + case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ + return IRQ_IXDP2351_INTA_82546; + case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ + return IRQ_IXDP2351_INTB_82546; + /* PMC SLOT */ + case DEVPIN(0, 1): /* PMCP INTA# */ + case DEVPIN(2, 4): /* PMCS INTD# */ + return IRQ_IXDP2351_SPCI_PMC_INTA; + case DEVPIN(0, 2): /* PMCP INTB# */ + case DEVPIN(2, 1): /* PMCS INTA# */ + return IRQ_IXDP2351_SPCI_PMC_INTB; + case DEVPIN(0, 3): /* PMCP INTC# */ + case DEVPIN(2, 2): /* PMCS INTB# */ + return IRQ_IXDP2351_SPCI_PMC_INTC; + case DEVPIN(0, 4): /* PMCP INTD# */ + case DEVPIN(2, 3): /* PMCS INTC# */ + return IRQ_IXDP2351_SPCI_PMC_INTD; + } + } else { + /* Device is located indirectly after first bridge */ + /* Not supported now */ + return -1; + } + break; + case 0x0010: + if (tmp_bus == dev->bus) { + /* Device is located directy after second bridge */ + /* Secondary bus of second bridge */ + switch (devpin) { + case DEVPIN(0, 1): /* DB#0 */ + case DEVPIN(0, 2): + case DEVPIN(0, 3): + case DEVPIN(0, 4): + return IRQ_IXDP2351_SPCI_DB_0; + case DEVPIN(1, 1): /* DB#1 */ + case DEVPIN(1, 2): + case DEVPIN(1, 3): + case DEVPIN(1, 4): + return IRQ_IXDP2351_SPCI_DB_1; + case DEVPIN(2, 1): /* FIC1 */ + case DEVPIN(2, 2): + case DEVPIN(2, 3): + case DEVPIN(2, 4): + case DEVPIN(3, 1): /* FIC2 */ + case DEVPIN(3, 2): + case DEVPIN(3, 3): + case DEVPIN(3, 4): + return IRQ_IXDP2351_SPCI_FIC; + } + } else { + /* Device is located indirectly after second bridge */ + /* Not supported now */ + return -1; + } + break; + } + + return -1; +} + +struct hw_pci ixdp2351_pci __initdata = { + .nr_controllers = 1, + .preinit = ixp23xx_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = ixdp2351_map_irq, +}; + +int __init ixdp2351_pci_init(void) +{ + if (machine_is_ixdp2351()) + pci_common_init(&ixdp2351_pci); + + return 0; +} + +subsys_initcall(ixdp2351_pci_init); + +/* + * IXDP2351 Static Mapped I/O + */ +static struct map_desc ixdp2351_io_desc[] __initdata = { + { + .virtual = IXDP2351_NP_VIRT_BASE, + .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), + .length = IXDP2351_NP_PHYS_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXDP2351_BB_BASE_VIRT, + .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), + .length = IXDP2351_BB_SIZE, + .type = MT_DEVICE + } +}; + +static void __init ixdp2351_map_io(void) +{ + ixp23xx_map_io(); + iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); +} + +static void __init ixdp2351_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 1, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixdp2351_map_io, + .init_irq = ixdp2351_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = ixdp2351_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c new file mode 100644 index 000000000000..5330ad78c1bb --- /dev/null +++ b/arch/arm/mach-ixp23xx/pci.c @@ -0,0 +1,275 @@ +/* + * arch/arm/mach-ixp23xx/pci.c + * + * PCI routines for IXP23XX based systems + * + * Copyright (c) 2005 MontaVista Software, Inc. + * + * based on original code: + * + * Author: Naeem Afzal + * Copyright 2002-2005 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +extern int (*external_fault) (unsigned long, struct pt_regs *); + +static int pci_master_aborts = 0; + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int clear_master_aborts(void); + +static u32 +*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) +{ + u32 *paddress; + + /* + * Must be dword aligned + */ + where &= ~3; + + /* + * For top bus, generate type 0, else type 1 + */ + if (!bus_nr) { + if (PCI_SLOT(devfn) >= 8) + return 0; + + paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT + | (1 << (PCI_SLOT(devfn) + 16)) + | (PCI_FUNC(devfn) << 8) | where); + } else { + paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT + | (bus_nr << 16) + | (PCI_SLOT(devfn) << 11) + | (PCI_FUNC(devfn) << 8) | where); + } + + return paddress; +} + +/* + * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. + * 0 and 3 are not valid indexes... + */ +static u32 bytemask[] = { + /*0*/ 0, + /*1*/ 0xff, + /*2*/ 0xffff, + /*3*/ 0, + /*4*/ 0xffffffff, +}; + +static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + u32 n; + u32 *addr; + + n = where % 4; + + DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + pci_master_aborts = 0; + *value = (*addr >> (8*n)) & bytemask[size]; + if (pci_master_aborts) { + pci_master_aborts = 0; + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * We don't do error checking on the address for writes. + * It's assumed that the user checked for the device existing first + * by doing a read first. + */ +static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + u32 mask; + u32 *addr; + u32 temp; + + mask = ~(bytemask[size] << ((where % 0x4) * 8)); + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + temp = (u32) (value) << ((where % 0x4) * 8); + *addr = (*addr & mask) | temp; + + clear_master_aborts(); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops ixp23xx_pci_ops = { + .read = ixp23xx_pci_read_config, + .write = ixp23xx_pci_write_config, +}; + +struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) +{ + return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata); +} + +int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + volatile unsigned long temp; + unsigned long flags; + + pci_master_aborts = 1; + + local_irq_save(flags); + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + local_irq_restore(flags); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int clear_master_aborts(void) +{ + volatile u32 temp; + + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + + return 0; +} + +void __init ixp23xx_pci_preinit(void) +{ +#ifdef __ARMEB__ + *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ +#endif + /* + * ADDR_31 needs to be clear for PCI memory access to CPP memory + */ + *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; + *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; + + /* + * Select correct memory for PCI inbound transactions + */ + if (ixp23xx_cpp_boot()) { + *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); + } else { + *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); + } + + hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, + "PCI config cycle to non-existent device"); + + *IXP23XX_PCI_ADDR_EXT = 0x0000e000; +} + +/* + * Prevent PCI layer from seeing the inbound host-bridge resources + */ +static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) +{ + int i; + + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); + +/* + * IXP2300 systems often have large resource requirements, so we just + * use our own resource space. + */ +static struct resource ixp23xx_pci_mem_space = { + .start = IXP23XX_PCI_MEM_START, + .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + .name = "PCI Mem Space" +}; + +static struct resource ixp23xx_pci_io_space = { + .start = 0x00000100, + .end = 0x01ffffff, + .flags = IORESOURCE_IO, + .name = "PCI I/O Space" +}; + +int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr >= 1) + return 0; + + sys->resource[0] = &ixp23xx_pci_io_space; + sys->resource[1] = &ixp23xx_pci_mem_space; + sys->resource[2] = NULL; + + return 1; +} diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c new file mode 100644 index 000000000000..43c14e740794 --- /dev/null +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -0,0 +1,164 @@ +/* + * arch/arm/mach-ixp23xx/roadrunner.c + * + * RoadRunner board-specific routines + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * Interrupt mapping + */ +#define INTA IRQ_ROADRUNNER_PCI_INTA +#define INTB IRQ_ROADRUNNER_PCI_INTB +#define INTC IRQ_ROADRUNNER_PCI_INTC +#define INTD IRQ_ROADRUNNER_PCI_INTD + +#define INTC_PIN IXP23XX_GPIO_PIN_11 +#define INTD_PIN IXP23XX_GPIO_PIN_12 + +static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; + static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; + static int usb_irq[] = {INTB, INTC, INTD, -1}; + static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; + static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; + + switch(dev->bus->number) { + case 0: + switch(dev->devfn) { + case 0x0: // PCI-PCI bridge + break; + case 0x8: // PCI Card Slot + return pci_card_slot_irq[pin - 1]; + case 0x10: // PMC Slot + return pmc_card_slot_irq[pin - 1]; + case 0x18: // PMC Slot Secondary Agent + break; + case 0x20: // IXP Processor + break; + default: + return NO_IRQ; + } + break; + + case 1: + switch(dev->devfn) { + case 0x0: // IDE Controller + return (pin == 1) ? INTC : -1; + case 0x8: // USB fun 0 + case 0x9: // USB fun 1 + case 0xa: // USB fun 2 + return usb_irq[pin - 1]; + case 0x10: // Mini PCI 1 + return mini_pci_1_irq[pin-1]; + case 0x18: // Mini PCI 2 + return mini_pci_2_irq[pin-1]; + case 0x20: // MEM slot + return (pin == 1) ? INTA : -1; + default: + return NO_IRQ; + } + break; + + default: + return NO_IRQ; + } + + return NO_IRQ; +} + +static void roadrunner_pci_preinit(void) +{ + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + + ixp23xx_pci_preinit(); +} + +static struct hw_pci roadrunner_pci __initdata = { + .nr_controllers = 1, + .preinit = roadrunner_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = roadrunner_map_irq, +}; + +static int __init roadrunner_pci_init(void) +{ + if (machine_is_roadrunner()) + pci_common_init(&roadrunner_pci); + + return 0; +}; + +subsys_initcall(roadrunner_pci_init); + +static void __init roadrunner_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 2, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") + /* Maintainer: Deepak Saxena */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = roadrunner_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index c1d77f5b3823..0104fd142e70 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -10,6 +10,11 @@ config ARCH_LUBBOCK select PXA25x select SA1111 +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" + select PXA27x + select IWMMXT + config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 382644401a4d..4e8a983e2b83 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o # Specific board support obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o +obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c new file mode 100644 index 000000000000..ec0f43a102c7 --- /dev/null +++ b/arch/arm/mach-pxa/lpd270.c @@ -0,0 +1,393 @@ +/* + * linux/arch/arm/mach-pxa/lpd270.c + * + * Support for the LogicPD PXA270 Card Engine. + * Derived from the mainstone code, which carries these notices: + * + * Author: Nicolas Pitre + * Created: Nov 05, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" + + +static unsigned int lpd270_irq_enabled; + +static void lpd270_mask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); + + lpd270_irq_enabled &= ~(1 << lpd270_irq); + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static void lpd270_unmask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + lpd270_irq_enabled |= 1 << lpd270_irq; + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static struct irqchip lpd270_irq_chip = { + .ack = lpd270_mask_irq, + .mask = lpd270_mask_irq, + .unmask = lpd270_unmask_irq, +}; + +static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long pending; + + pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; + do { + GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ + if (likely(pending)) { + irq = LPD270_IRQ(0) + __ffs(pending); + desc = irq_desc + irq; + desc_handle_irq(irq, desc, regs); + + pending = __raw_readw(LPD270_INT_STATUS) & + lpd270_irq_enabled; + } + } while (pending); +} + +static void __init lpd270_init_irq(void) +{ + int irq; + + pxa_init_irq(); + + __raw_writew(0, LPD270_INT_MASK); + __raw_writew(0, LPD270_INT_STATUS); + + /* setup extra LogicPD PXA270 irqs */ + for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { + set_irq_chip(irq, &lpd270_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); + set_irq_type(IRQ_GPIO(0), IRQT_FALLING); +} + + +#ifdef CONFIG_PM +static int lpd270_irq_resume(struct sys_device *dev) +{ + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); + return 0; +} + +static struct sysdev_class lpd270_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lpd270_irq_resume, +}; + +static struct sys_device lpd270_irq_device = { + .cls = &lpd270_irq_sysclass, +}; + +static int __init lpd270_irq_device_init(void) +{ + int ret = sysdev_class_register(&lpd270_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lpd270_irq_device); + return ret; +} + +device_initcall(lpd270_irq_device_init); +#endif + + +static struct resource smc91x_resources[] = { + [0] = { + .start = LPD270_ETH_PHYS, + .end = (LPD270_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LPD270_ETHERNET_IRQ, + .end = LPD270_ETHERNET_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device lpd270_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +static struct resource lpd270_flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lpd270_flash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + }, { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + }, +}; + +static struct flash_platform_data lpd270_flash_data[2] = { + { + .name = "processor-flash", + .map_name = "cfi_probe", + .parts = lpd270_flash0_partitions, + .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), + }, { + .name = "mainboard-flash", + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lpd270_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lpd270_flash_data[0], + }, + .resource = &lpd270_flash_resources[0], + .num_resources = 1, + }, { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lpd270_flash_data[1], + }, + .resource = &lpd270_flash_resources[1], + .num_resources = 1, + }, +}; + +static void lpd270_backlight_power(int on) +{ + if (on) { + pxa_gpio_mode(GPIO16_PWM0_MD); + pxa_set_cken(CKEN0_PWM0, 1); + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x3ff; + PWM_PERVAL0 = 0x3ff; + } else { + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x0; + PWM_PERVAL0 = 0x3FF; + pxa_set_cken(CKEN0_PWM0, 0); + } +} + +/* 5.7" TFT QVGA (LoLo display number 1) */ +static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 64, + .left_margin = 0x27, + .right_margin = 0x09, + .vsync_len = 0x04, + .upper_margin = 0x08, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 6.4" TFT VGA (LoLo display number 5) */ +static struct pxafb_mach_info sharp_lq64d343 __initdata = { + .pixclock = 20000, + .xres = 640, + .yres = 480, + .bpp = 16, + .hsync_len = 49, + .left_margin = 0x89, + .right_margin = 0x19, + .vsync_len = 18, + .upper_margin = 0x22, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .lccr0 = 0x07800080, + .lccr3 = 0x04400001, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 3.5" TFT QVGA (LoLo display number 8) */ +static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 0x34, + .left_margin = 0x09, + .right_margin = 0x09, + .vsync_len = 0x08, + .upper_margin = 0x05, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &lpd270_audio_device, + &lpd270_flash_device[0], + &lpd270_flash_device[1], +}; + +static int lpd270_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data lpd270_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = lpd270_ohci_init, +}; + +static void __init lpd270_init(void) +{ + lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + lpd270_flash_data[1].width = 4; + + /* + * System bus arbiter setting: + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + + /* + * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. + */ + pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + // set_pxa_fb_info(&sharp_lq057q3dc02); + set_pxa_fb_info(&sharp_lq64d343); + // set_pxa_fb_info(&sharp_lq035q7db02_20); + + pxa_set_ohci_info(&lpd270_ohci_platform_data); +} + + +static struct map_desc lpd270_io_desc[] __initdata = { + { + .virtual = LPD270_CPLD_VIRT, + .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), + .length = LPD270_CPLD_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init lpd270_map_io(void) +{ + pxa_map_io(); + iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); + + /* initialize sleep mode regs (wake-up sources, etc) */ + PGSR0 = 0x00008800; + PGSR1 = 0x00000002; + PGSR2 = 0x0001FC00; + PGSR3 = 0x00001F81; + PWER = 0xC0000002; + PRER = 0x00000002; + PFER = 0x00000002; + + /* for use I SRAM as framebuffer. */ + PSLR |= 0x00000F04; + PCFR = 0x00000066; +} + +MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") + /* Maintainer: Peter Barada */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = lpd270_map_io, + .init_irq = lpd270_init_irq, + .timer = &pxa_timer, + .init_machine = lpd270_init, +MACHINE_END diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 30ec317bbb97..0dbb079ecd25 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = { .id = -1, }; +EXPORT_SYMBOL_GPL(akitaioexp_device); + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 6923316b3d0d..cd67ab1b217b 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -111,7 +111,7 @@ config SA1100_LART bool "LART" help Say Y here if you are using the Linux Advanced Radio Terminal - (also known as the LART). See for + (also known as the LART). See for information on the LART. config SA1100_PLEB diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 6435b2e48ffa..d68630b74d78 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -11,7 +11,7 @@ * linux-2.4.5-rmk1 * * This software has been developed while working on the LART - * computing board (http://www.lart.tudelft.nl/), which is + * computing board (http://www.lartmaker.nl/), which is * sponsored by the Mobile Multi-media Communications * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications * (http://www.ubicom.tudelft.nl/) projects. diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e680c5fd93b5..c55b739e10ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -239,6 +239,17 @@ config CPU_XSCALE select CPU_CACHE_VIVT select CPU_TLB_V4WBI +# XScale Core Version 3 +config CPU_XSC3 + bool + depends on ARCH_IXP23XX + default y + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_CACHE_VIVT + select CPU_TLB_V4WBI + select IO_36 + # ARMv6 config CPU_V6 bool "Support ARM V6 processor" @@ -361,11 +372,17 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool +# +# CPU supports 36-bit I/O +# +config IO_36 + bool + comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6 + depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 default y help Say Y if you want to include kernel support for running user space diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ffe73ba2bf17..07a538505784 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o +obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o @@ -51,4 +52,5 @@ obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o +obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_V6) += proc-v6.o diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S new file mode 100644 index 000000000000..9a2cb4332b4c --- /dev/null +++ b/arch/arm/mm/copypage-xsc3.S @@ -0,0 +1,97 @@ +/* + * linux/arch/arm/lib/copypage-xsc3.S + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adapted for 3rd gen XScale core, no more mini-dcache + * Author: Matt Gilbert (matthew.m.gilbert@intel.com) + */ + +#include +#include +#include + +/* + * General note: + * We don't really want write-allocate cache behaviour for these functions + * since that will just eat through 8K of the cache. + */ + + .text + .align 5 +/* + * XSC3 optimised copy_user_page + * r0 = destination + * r1 = source + * r2 = virtual user address of ultimate destination page + * + * The source page may have some clean entries in the cache already, but we + * can safely ignore them - break_cow() will flush them out of the cache + * if we eventually end up using our copied page. + * + */ +ENTRY(xsc3_mc_copy_user_page) + stmfd sp!, {r4, r5, lr} + mov lr, #PAGE_SZ/64-1 + + pld [r1, #0] + pld [r1, #32] +1: pld [r1, #64] + pld [r1, #96] + +2: ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + subs lr, lr, #1 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + bgt 1b + beq 2b + + ldmfd sp!, {r4, r5, pc} + + .align 5 +/* + * XScale optimised clear_user_page + * r0 = destination + * r1 = virtual user address of ultimate destination page + */ +ENTRY(xsc3_mc_clear_user_page) + mov r1, #PAGE_SZ/32 + mov r2, #0 + mov r3, #0 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate line + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + subs r1, r1, #1 + bne 1b + mov pc, lr + + __INITDATA + + .type xsc3_mc_user_fns, #object +ENTRY(xsc3_mc_user_fns) + .long xsc3_mc_clear_user_page + .long xsc3_mc_copy_user_page + .size xsc3_mc_user_fns, . - xsc3_mc_user_fns diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index ef8d30a185a9..5e5d05bcad50 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -557,7 +557,8 @@ void __init create_mapping(struct map_desc *md) * supersections are only allocated for domain 0 regardless * of the actual domain assignments in use. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) { + if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) + && domain == 0) { /* * Align to supersection boundary if !high pages. * High pages have already been checked for proper diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9a7e7c096aa9..ee6f15298735 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -21,6 +21,14 @@ #define D_CACHE_LINE_SIZE 32 +#define TTB_C (1 << 0) +#define TTB_S (1 << 1) +#define TTB_IMP (1 << 2) +#define TTB_RGN_NC (0 << 3) +#define TTB_RGN_WBWA (1 << 3) +#define TTB_RGN_WT (2 << 3) +#define TTB_RGN_WB (3 << 3) + .macro cpsie, flags .ifc \flags, f .long 0xf1080040 @@ -115,7 +123,7 @@ ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id #ifdef CONFIG_SMP - orr r0, r0, #2 @ set shared pgtable + orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer @@ -161,8 +169,8 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_YOUNG biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK -@ tst r1, #L_PTE_EXEC -@ orreq r2, r2, #PTE_EXT_XN + tst r1, #L_PTE_EXEC + orreq r2, r2, #PTE_EXT_XN tst r1, #L_PTE_PRESENT moveq r2, #0 @@ -221,7 +229,7 @@ __v6_setup: mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register #ifdef CONFIG_SMP - orr r4, r4, #2 @ set shared pgtable + orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S new file mode 100644 index 000000000000..f90513e9af0c --- /dev/null +++ b/arch/arm/mm/proc-xsc3.S @@ -0,0 +1,498 @@ +/* + * linux/arch/arm/mm/proc-xsc3.S + * + * Original Author: Matthew Gilbert + * Current Maintainer: Deepak Saxena + * + * Copyright 2004 (C) Intel Corp. + * Copyright 2005 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an + * extension to Intel's original XScale core that adds the following + * features: + * + * - ARMv6 Supersections + * - Low Locality Reference pages (replaces mini-cache) + * - 36-bit addressing + * - L2 cache + * - Cache-coherency if chipset supports it + * + * Based on orignal XScale code by Nicolas Pitre + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be flushed. If the + * area is larger than this, then we flush the whole cache. + */ +#define MAX_AREA_SIZE 32768 + +/* + * The cache line size of the I and D cache. + */ +#define CACHELINESIZE 32 + +/* + * The size of the data cache. + */ +#define CACHESIZE 32768 + +/* + * Run with L2 enabled. + */ +#define L2_CACHE_ENABLE 1 + +/* + * Enable the Branch Target Buffer (can cause crashes, see erratum #42.) + */ +#define BTB_ENABLE 0 + +/* + * This macro is used to wait for a CP15 write and is needed + * when we have to ensure that the last operation to the co-pro + * was completed before continuing with operation. + */ + .macro cpwait_ret, lr, rd + mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 + sub pc, \lr, \rd, LSR #32 @ wait for completion and + @ flush instruction pipeline + .endm + +/* + * This macro cleans & invalidates the entire xsc3 dcache by set & way. + */ + + .macro clean_d_cache rd, rs + mov \rd, #0x1f00 + orr \rd, \rd, #0x00e0 +1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way + adds \rd, \rd, #0x40000000 + bcc 1b + subs \rd, \rd, #0x20 + bpl 1b + .endm + + .text + +/* + * cpu_xsc3_proc_init() + * + * Nothing too exciting at the moment + */ +ENTRY(cpu_xsc3_proc_init) + mov pc, lr + +/* + * cpu_xsc3_proc_fin() + */ +ENTRY(cpu_xsc3_proc_fin) + str lr, [sp, #-4]! + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + bl xsc3_flush_kern_cache_all @ clean caches + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1800 @ ...IZ........... + bic r0, r0, #0x0006 @ .............CA. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldr pc, [sp], #4 + +/* + * cpu_xsc3_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_xsc3_reset) + mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r1 @ reset CPSR + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x0086 @ ........B....CA. + bic r1, r1, #0x3900 @ ..VIZ..S........ + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB + bic r1, r1, #0x0001 @ ...............M + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + @ CAUTION: MMU turned off from this point. We count on the pipeline + @ already containing those two last instructions to survive. + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, r0 + +/* + * cpu_xsc3_do_idle() + * + * Cause the processor to idle + * + * For now we do nothing but go to idle mode for every case + * + * XScale supports clock switching, but using idle mode support + * allows external hardware to react to system state changes. + + MMG: Come back to this one. + */ + .align 5 + +ENTRY(cpu_xsc3_do_idle) + mov r0, #1 + mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE + mov pc, lr + +/* ================================= CACHE ================================ */ + +/* + * flush_user_cache_all() + * + * Invalidate all cache entries in a particular address + * space. + */ +ENTRY(xsc3_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(xsc3_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: + clean_d_cache r0, r1 + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_user_cache_range(start, end, vm_flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_area_struct describing address space + */ + .align 5 +ENTRY(xsc3_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #MAX_AREA_SIZE + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC + mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line + mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * Note: single I-cache line invalidation isn't used here since + * it also trashes the mini I-cache used by JTAG debuggers. + */ +ENTRY(xsc3_coherent_kern_range) +/* FALLTHROUGH */ +ENTRY(xsc3_coherent_user_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(xsc3_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_inv_range) + tst r0, #CACHELINESIZE - 1 + bic r0, r0, #CACHELINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry + tst r1, #CACHELINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_clean_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_flush_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line + mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +ENTRY(xsc3_cache_fns) + .long xsc3_flush_kern_cache_all + .long xsc3_flush_user_cache_all + .long xsc3_flush_user_cache_range + .long xsc3_coherent_kern_range + .long xsc3_coherent_user_range + .long xsc3_flush_kern_dcache_page + .long xsc3_dma_inv_range + .long xsc3_dma_clean_range + .long xsc3_dma_flush_range + +ENTRY(cpu_xsc3_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + subs r1, r1, #CACHELINESIZE + bhi 1b + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_xsc3_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_xsc3_switch_mm) + clean_d_cache r1, r2 + mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush +#ifdef L2_CACHE_ENABLE + orr r0, r0, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + cpwait_ret lr, ip + +/* + * cpu_xsc3_set_pte(ptep, pte) + * + * Set a PTE and flush it out + * + */ + .align 5 +ENTRY(cpu_xsc3_set_pte) + str r1, [r0], #-2048 @ linux version + + bic r2, r1, #0xff0 + orr r2, r2, #PTE_TYPE_EXT @ extended page + + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + tst r3, #L_PTE_USER @ User? + orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w + + tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w + @ combined with user -> user r/w + +#if L2_CACHE_ENABLE + @ If its cacheable it needs to be in L2 also. + eor ip, r1, #L_PTE_CACHEABLE + tst ip, #L_PTE_CACHEABLE + orreq r2, r2, #PTE_EXT_TEX(0x5) +#endif + + tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 @ no -> fault + + str r2, [r0] @ hardware version + mov ip, #0 + mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + + .ltorg + + .align + + __INIT + + .type __xsc3_setup, #function +__xsc3_setup: + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs +#if L2_CACHE_ENABLE + orr r4, r4, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + mov r0, #1 @ Allow access to CP0 and CP13 + orr r0, r0, #1 << 13 @ Its undefined whether this + mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg + and r0, r0, #2 @ preserve bit P bit setting +#if L2_CACHE_ENABLE + orr r0, r0, #(1 << 10) @ enable L2 for LLR cache +#endif + mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg + mrc p15, 0, r0, c1, c0, 0 @ get control register + bic r0, r0, #0x0200 @ .... ..R. .... .... + bic r0, r0, #0x0002 @ .... .... .... ..A. + orr r0, r0, #0x0005 @ .... .... .... .C.M +#if BTB_ENABLE + orr r0, r0, #0x3900 @ ..VI Z..S .... .... +#else + orr r0, r0, #0x3100 @ ..VI ...S .... .... +#endif +#if L2_CACHE_ENABLE + orr r0, r0, #0x4000000 @ L2 enable +#endif + mov pc, lr + + .size __xsc3_setup, . - __xsc3_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + + .type xsc3_processor_functions, #object +ENTRY(xsc3_processor_functions) + .word v5t_early_abort + .word cpu_xsc3_proc_init + .word cpu_xsc3_proc_fin + .word cpu_xsc3_reset + .word cpu_xsc3_do_idle + .word cpu_xsc3_dcache_clean_area + .word cpu_xsc3_switch_mm + .word cpu_xsc3_set_pte + .size xsc3_processor_functions, . - xsc3_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_xsc3_name, #object +cpu_xsc3_name: + .asciz "XScale-Core3" + .size cpu_xsc3_name, . - cpu_xsc3_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __xsc3_proc_info,#object +__xsc3_proc_info: + .long 0x69056000 + .long 0xffffe000 + .long 0x00000c0e + b __xsc3_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_xsc3_name + .long xsc3_processor_functions + .long v4wbi_tlb_fns + .long xsc3_mc_user_fns + .long xsc3_cache_fns + .size __xsc3_proc_info, . - __xsc3_proc_info diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h index fff0c94b75c4..300f4bf3bc74 100644 --- a/include/asm-arm/arch-aaec2000/uncompress.h +++ b/include/asm-arm/arch-aaec2000/uncompress.h @@ -15,7 +15,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putstr( const char *s ) +static void putc(int c) { unsigned long serial_port; do { @@ -28,17 +28,16 @@ static void putstr( const char *s ) return; } while (0); - for (; *s; s++) { - /* wait for space in the UART's transmitter */ - while ((UART(UART_SR) & UART_SR_TxFF)); - /* send the character out. */ - UART(UART_DR) = *s; - /* if a LF, also do CR... */ - if (*s == 10) { - while ((UART(UART_SR) & UART_SR_TxFF)); - UART(UART_DR) = 13; - } - } + /* wait for space in the UART's transmitter */ + while ((UART(UART_SR) & UART_SR_TxFF)) + barrier(); + + /* send the character out. */ + UART(UART_DR) = c; +} + +static inline void flush(void) +{ } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index b30dd5520713..7b38497c24b5 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -31,21 +31,22 @@ * * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) +{ + void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ + + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) + barrier(); + __raw_writel(c, sys + AT91_DBGU_THR); +} + +static inline void flush(void) { void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ - while (*s) { - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } - __raw_writel(*s, sys + AT91_DBGU_THR); - if (*s == '\n') { - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } - __raw_writel('\r', sys + AT91_DBGU_THR); - } - s++; - } /* wait for transmission to complete */ - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) { barrier(); } + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) + barrier(); } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h index 68601b3e3b95..c437e0c88c3f 100644 --- a/include/asm-arm/arch-cl7500/uncompress.h +++ b/include/asm-arm/arch-cl7500/uncompress.h @@ -3,27 +3,19 @@ * * Copyright (C) 1999, 2000 Nexus Electronics Ltd. */ - #define BASE 0x03010000 #define SERBASE (BASE + (0x2f8 << 2)) -static __inline__ void putc(char c) +static inline void putc(char c) { - while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)); + while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)) + barrier(); + *((volatile unsigned int *)(SERBASE)) = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void arch_decomp_setup(void) diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 9fc4bcfa1681..07157b7e4b20 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -25,7 +25,6 @@ #undef CLPS7111_BASE #define CLPS7111_BASE CLPS7111_PHYS_BASE -#define barrier() __asm__ __volatile__("": : :"memory") #define __raw_readl(p) (*(unsigned long *)(p)) #define __raw_writel(v,p) (*(unsigned long *)(p) = (v)) @@ -40,21 +39,15 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - char c; + while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) + barrier(); + clps_writel(c, UARTDRx); +} - while ((c = *s++) != '\0') { - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel(c, UARTDRx); - - if (c == '\n') { - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel('\r', UARTDRx); - } - } +static inline void flush(void) +{ while (clps_readl(SYSFLGx) & SYSFLG_UBUSY) barrier(); } diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h index eee95581a923..66b19c7fd908 100644 --- a/include/asm-arm/arch-ebsa110/uncompress.h +++ b/include/asm-arm/arch-ebsa110/uncompress.h @@ -8,33 +8,34 @@ * published by the Free Software Foundation. */ +#include + +#define SERIAL_BASE ((unsigned char *)0xfe000be0) + /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - unsigned long tmp1, tmp2; - __asm__ __volatile__( - "ldrb %0, [%2], #1\n" -" teq %0, #0\n" -" beq 3f\n" -"1: strb %0, [%3]\n" -"2: ldrb %1, [%3, #0x14]\n" -" and %1, %1, #0x60\n" -" teq %1, #0x60\n" -" bne 2b\n" -" teq %0, #'\n'\n" -" moveq %0, #'\r'\n" -" beq 1b\n" -" ldrb %0, [%2], #1\n" -" teq %0, #0\n" -" bne 1b\n" -"3: ldrb %1, [%3, #0x14]\n" -" and %1, %1, #0x60\n" -" teq %1, #0x60\n" -" bne 3b" - : "=&r" (tmp1), "=&r" (tmp2) - : "r" (s), "r" (0xf0000be0) : "cc"); + unsigned char v, *base = SERIAL_BASE; + + do { + v = base[UART_LSR << 2]; + barrier(); + } while (!(v & UART_LSR_THRE)); + + base[UART_TX << 2] = c; +} + +static inline void flush(void) +{ + unsigned char v, *base = SERIAL_BASE; + + do { + v = base[UART_LSR << 2]; + barrier(); + } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != + (UART_LSR_TEMT|UART_LSR_THRE)); } /* diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h index c2fd84e2d90e..86142c882b3a 100644 --- a/include/asm-arm/arch-ebsa285/uncompress.h +++ b/include/asm-arm/arch-ebsa285/uncompress.h @@ -15,10 +15,11 @@ #define DC21285_BASE ((volatile unsigned int *)0x42000160) #define SER0_BASE ((volatile unsigned char *)0x7c0003f8) -static __inline__ void putc(char c) +static inline void putc(char c) { if (machine_is_netwinder()) { - while ((SER0_BASE[5] & 0x60) != 0x60); + while ((SER0_BASE[5] & 0x60) != 0x60) + barrier(); SER0_BASE[0] = c; } else { while (DC21285_BASE[6] & 8); @@ -26,17 +27,8 @@ static __inline__ void putc(char c) } } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } /* diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h index 4410d217077e..c15274c85d5d 100644 --- a/include/asm-arm/arch-ep93xx/uncompress.h +++ b/include/asm-arm/arch-ep93xx/uncompress.h @@ -16,17 +16,27 @@ static unsigned char __raw_readb(unsigned int ptr) return *((volatile unsigned char *)ptr); } +static unsigned int __raw_readl(unsigned int ptr) +{ + return *((volatile unsigned int *)ptr); +} + static void __raw_writeb(unsigned char value, unsigned int ptr) { *((volatile unsigned char *)ptr) = value; } +static void __raw_writel(unsigned int value, unsigned int ptr) +{ + *((volatile unsigned int *)ptr) = value; +} + #define PHYS_UART1_DATA 0x808c0000 #define PHYS_UART1_FLAG 0x808c0018 #define UART1_FLAG_TXFF 0x20 -static __inline__ void putc(char c) +static inline void putc(int c) { int i; @@ -39,15 +49,37 @@ static __inline__ void putc(char c) __raw_writeb(c, PHYS_UART1_DATA); } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } -#define arch_decomp_setup() + +/* + * Some bootloaders don't turn off DMA from the ethernet MAC before + * jumping to linux, which means that we might end up with bits of RX + * status and packet data scribbled over the uncompressed kernel image. + * Work around this by resetting the ethernet MAC before we uncompress. + */ +#define PHYS_ETH_SELF_CTL 0x80010020 +#define ETH_SELF_CTL_RESET 0x00000001 + +static void ethernet_reset(void) +{ + unsigned int v; + + /* Reset the ethernet MAC. */ + v = __raw_readl(PHYS_ETH_SELF_CTL); + __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL); + + /* Wait for reset to finish. */ + while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET) + ; +} + + +static void arch_decomp_setup(void) +{ + ethernet_reset(); +} + #define arch_decomp_wdog() diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h index 9535764bcc71..18c69e0f3585 100644 --- a/include/asm-arm/arch-h720x/uncompress.h +++ b/include/asm-arm/arch-h720x/uncompress.h @@ -12,22 +12,20 @@ #define LSR 0x14 #define TEMPTY 0x40 -static void putstr(const char *s) +static inline void putc(int c) { - char c; volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - while ( (c = *s++) != '\0') { - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0); - /* write next character */ - *p = c; + /* wait until transmit buffer is empty */ + while((p[LSR] & TEMPTY) == 0x0) + barrier(); - if(c == '\n') { - while((p[LSR] & TEMPTY) == 0x0); - *p = '\r'; - } - } + /* write next character */ + *p = c; +} + +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h index 096077f2750b..da333f69136f 100644 --- a/include/asm-arm/arch-imx/uncompress.h +++ b/include/asm-arm/arch-imx/uncompress.h @@ -39,8 +39,7 @@ * * This does not append a newline */ -static void -putstr(const char *s) +static void putc(int c) { unsigned long serial_port; @@ -54,20 +53,14 @@ putstr(const char *s) return; } while(0); - while (*s) { - while ( !(UART(USR2) & USR2_TXFE) ) - barrier(); + while (!(UART(USR2) & USR2_TXFE)) + barrier(); - UART(TXR) = *s; + UART(TXR) = c; +} - if (*s == '\n') { - while ( !(UART(USR2) & USR2_TXFE) ) - barrier(); - - UART(TXR) = '\r'; - } - s++; - } +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h index 3957402741d3..f61825c4d901 100644 --- a/include/asm-arm/arch-integrator/uncompress.h +++ b/include/asm-arm/arch-integrator/uncompress.h @@ -28,21 +28,18 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)); - - AMBA_UART_DR = '\r'; - } - s++; - } - while (AMBA_UART_FR & (1 << 3)); +static inline void flush(void) +{ + while (AMBA_UART_FR & (1 << 3)) + barrier(); } /* diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h index 82b88762c3cc..c98eb6254b1f 100644 --- a/include/asm-arm/arch-iop3xx/uncompress.h +++ b/include/asm-arm/arch-iop3xx/uncompress.h @@ -19,23 +19,15 @@ static volatile UTYPE uart_base; #define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) -static __inline__ void putc(char c) +static inline void putc(char c) { - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE); + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); *uart_base = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void __arch_decomp_setup(unsigned long arch_id) diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h index 3d3d5b2ed6e9..f66b408f363e 100644 --- a/include/asm-arm/arch-ixp2000/uncompress.h +++ b/include/asm-arm/arch-ixp2000/uncompress.h @@ -29,23 +29,18 @@ #define UARTSR PHYS(0x14) /* Status reg */ -static __inline__ void putc(char c) +static inline void putc(int c) { int j = 0x1000; - while (--j && !(*UARTSR & UART_LSR_THRE)); + while (--j && !(*UARTSR & UART_LSR_THRE)) + barrier(); + *UARTDR = c; } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) - { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S new file mode 100644 index 000000000000..eb99fd69fd24 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/debug-macro.S @@ -0,0 +1,23 @@ +/* + * include/asm-arm/arch-ixp23xx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ mmu enabled? + ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical + ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h new file mode 100644 index 000000000000..2f4335e3b836 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/dma.h @@ -0,0 +1,3 @@ +/* + * include/asm-arm/arch-ixp23xx/dma.h + */ diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S new file mode 100644 index 000000000000..0ef4e6016ac4 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/entry-macro.S @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ixp23xx/entry-macro.S + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) + ldr \irqnr, [\irqnr] @ get interrupt number + cmp \irqnr, #0x0 @ suprious interrupt ? + movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits + subne \irqnr, \irqnr, #1 @ convert to 0 based + +#if 0 + cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH + bne 1001f + mov \irqnr, #IRQ_IXP23XX_INTA + + ldr \irqnr, =0xf5000030 + + mov \tmp, #(1<<26) + tst \irqnr, \tmp + movne \irqnr, #IRQ_IXP23XX_INTB + + mov \tmp, #(1<<27) + tst \irqnr, \tmp + movne \irqnr, #IRQ_IXP23XX_INTA +1001: +#endif + .endm diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h new file mode 100644 index 000000000000..c0010d21a684 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/hardware.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-ixp23xx/hardware.h + * + * Copyright (C) 2002-2004 Intel Corporation. + * Copyricht (C) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Hardware definitions for IXP23XX based systems + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* PCI IO info */ +#define PCIO_BASE IXP23XX_PCI_IO_VIRT +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0xe0000000 + +#include "ixp23xx.h" + +#define pcibios_assign_all_busses() 0 + +/* + * Platform helper functions + */ +#include "platform.h" + +/* + * Platform-specific headers + */ +#include "ixdp2351.h" + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h new file mode 100644 index 000000000000..18415a81ac74 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/io.h @@ -0,0 +1,54 @@ +/* + * include/asm-arm/arch-ixp23xx/io.h + * + * Original Author: Naeem M Afzal + * Maintainer: Deepak Saxena + * + * Copyright (C) 2003-2005 Intel Corp. + * Copyright (C) 2005 MontaVista Software, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) +#define __mem_pci(a) (a) + +#include /* For BUG */ + +static inline void __iomem * +ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags) +{ + if (addr >= IXP23XX_PCI_MEM_START && + addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { + if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) + return NULL; + + return (void __iomem *) + ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); + } + + return __ioremap(addr, size, flags); +} + +static inline void +ixp23xx_iounmap(void __iomem *addr) +{ + if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) && + (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE)) + return; + + __iounmap(addr); +} + +#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f) +#define __arch_iounmap(a) ixp23xx_iounmap(a) + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h new file mode 100644 index 000000000000..e69639585721 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/irqs.h @@ -0,0 +1,223 @@ +/* + * include/asm-arm/arch-ixp23xx/irqs.h + * + * IRQ definitions for IXP23XX based systems + * + * Author: Naeem Afzal + * + * Copyright (C) 2003-2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 +#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS + + +#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ +#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ +#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ +#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ +#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ +#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ +#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ +#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ +#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ +#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ +#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ +#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ +#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ +#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ +#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ +#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ +#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ +#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ +#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ +#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ +#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ +#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ +#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ +#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ +#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ +#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ +#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ +#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ +#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ +#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ +#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ +#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ +#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ +#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ +#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ +#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ +#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ +#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ +#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ +#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ +#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ +#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ +#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ +#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ + +#define NUM_IXP23XX_RAW_IRQS 120 + +#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ +#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ + +#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) + +/* + * We default to 32 per-board IRQs. Increase this number if you need + * more, but keep it realistic. + */ +#define NR_IXP23XX_MACH_IRQS 32 + +#define NR_IRQS NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS + +#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) + + +/* + * IXDP2351-specific interrupts + */ + +/* + * External PCI interrupts signaled through INTB + * + */ +#define IXDP2351_INTB_IRQ_BASE 0 +#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) +#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) +#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) +#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) +#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) +#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) +#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) +#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) +#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) + +#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) +#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) +#define IXDP2351_INTB_IRQ_VALID 0x01FF +#define IXDP2351_INTB_IRQ_NUM 16 + +/* + * Other external interrupts signaled through INTA + */ +#define IXDP2351_INTA_IRQ_BASE 16 +#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) +#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) +#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) +#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) +#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) +#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) +#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) +#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) +#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) +#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) +#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) +#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) +#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) +#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) + +#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) +#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) +#define IXDP2351_INTA_IRQ_VALID 0xFF3F +#define IXDP2351_INTA_IRQ_NUM 16 + + +/* + * ADI RoadRunner IRQs + */ +#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA +#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB +#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 +#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 + +/* + * Put new board definitions here + */ + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h new file mode 100644 index 000000000000..4a24f8f15655 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/ixdp2351.h @@ -0,0 +1,89 @@ +/* + * include/asm-arm/arch-ixp23xx/ixdp2351.h + * + * Register and other defines for IXDP2351 + * + * Copyright (c) 2002-2004 Intel Corp. + * Copytight (c) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_IXDP2351_H +#define __ASM_ARCH_IXDP2351_H + +/* + * NP module memory map + */ +#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) +#define IXDP2351_NP_PHYS_SIZE 0x00100000 +#define IXDP2351_NP_VIRT_BASE 0xeff00000 + +#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) +#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) + +#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) + +#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) + +#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) +#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) +#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) + +/* + * Base board module memory map + */ + +#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) +#define IXDP2351_BB_SIZE 0x01000000 +#define IXDP2351_BB_BASE_VIRT (0xee000000) + +#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) + +#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) +#define IXDP2351_NVRAM_SIZE (0x20000) + +#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP3251_BB_AREA_BASE(0x00020000) +#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) +#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) +#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) +#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) +#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) + +/* + * On board CPLD registers + */ +#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) + +#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) +#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) + +#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA +#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 + +#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) +#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) +#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) +#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) +#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) +#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ +#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ +#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ +#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ +#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) +#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) + /* Interrupt bits are defined in irqs.h */ +#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) +#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) + +/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ +/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ +/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ +/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ +/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h new file mode 100644 index 000000000000..e49e1ca61b1a --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/ixp23xx.h @@ -0,0 +1,306 @@ +/* + * include/asm-arm/arch-ixp23xx/ixp23xx.h + * + * Register definitions for IXP23XX + * + * Copyright (C) 2003-2005 Intel Corporation. + * Copyright (C) 2005 MontaVista Software, Inc. + * + * Maintainer: Deepak Saxena + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IXP23XX_H +#define __ASM_ARCH_IXP23XX_H + +/* + * IXP2300 linux memory map: + * + * virt phys size + * fffd0000 a0000000 64K XSI2CPP_CSR + * fffc0000 c4000000 4K EXP_CFG + * fff00000 c8000000 64K PERIPHERAL + * fe000000 1c0000000 16M CAP_CSR + * fd000000 1c8000000 16M MSF_CSR + * fb000000 16M --- + * fa000000 1d8000000 32M PCI_IO + * f8000000 1da000000 32M PCI_CFG + * f6000000 1de000000 32M PCI_CREG + * f4000000 32M --- + * f0000000 1e0000000 64M PCI_MEM + * e[c-f]000000 per-platform mappings + */ + + +/**************************************************************************** + * Static mappings. + ****************************************************************************/ +#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 +#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 +#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 + +#define IXP23XX_EXP_CFG_PHYS 0xc4000000 +#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 +#define IXP23XX_EXP_CFG_SIZE 0x00001000 + +#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 +#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 +#define IXP23XX_PERIPHERAL_SIZE 0x00010000 + +#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL +#define IXP23XX_CAP_CSR_VIRT 0xfe000000 +#define IXP23XX_CAP_CSR_SIZE 0x01000000 + +#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL +#define IXP23XX_MSF_CSR_VIRT 0xfd000000 +#define IXP23XX_MSF_CSR_SIZE 0x01000000 + +#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL +#define IXP23XX_PCI_IO_VIRT 0xfa000000 +#define IXP23XX_PCI_IO_SIZE 0x02000000 + +#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL +#define IXP23XX_PCI_CFG_VIRT 0xf8000000 +#define IXP23XX_PCI_CFG_SIZE 0x02000000 +#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT +#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) + +#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL +#define IXP23XX_PCI_CREG_VIRT 0xf6000000 +#define IXP23XX_PCI_CREG_SIZE 0x02000000 +#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) + +#define IXP23XX_PCI_MEM_START 0xe0000000 +#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL +#define IXP23XX_PCI_MEM_VIRT 0xf0000000 +#define IXP23XX_PCI_MEM_SIZE 0x04000000 + + +/**************************************************************************** + * XSI2CPP CSRs. + ****************************************************************************/ +#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) +#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) +#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) +#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) +#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) + + +/**************************************************************************** + * Expansion Bus Config. + ****************************************************************************/ +#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) +#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) +#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) +#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) +#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) +#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) +#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) +#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) +#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) +#define IXP23XX_FLASH_WRITABLE (0x2) +#define IXP23XX_FLASH_BUS8 (0x1) + +#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) +#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) +#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) +#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) +#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) +#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) +#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) +#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) +#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) +#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) +#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) +#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) +#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) +#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) +#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) +#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) +#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) + +#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) +#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) + +#define IXP23XX_EXP_BUS_PHYS 0x90000000 +#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 + +#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) +#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) +#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) +#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) +#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) +#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) +#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) +#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) + + +/**************************************************************************** + * Peripherals. + ****************************************************************************/ +#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) +#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) +#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) +#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) +#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) +#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) +#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) +#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) +#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) +#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) +#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) +#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) +#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) +#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) + +#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) +#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) +#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) +#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) +#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) +#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) +#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) +#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) +#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) +#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) +#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) +#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) +#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) +#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) + + +/**************************************************************************** + * Interrupt controller. + ****************************************************************************/ +#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) +#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) +#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) +#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) +#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) +#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) +#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) +#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) +#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) +#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) +#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) +#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) +#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) +#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) +#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) +#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) +#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) +#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 + + +/**************************************************************************** + * GPIO. + ****************************************************************************/ +#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) +#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) +#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) +#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) +#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) +#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) +#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) +#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) +#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) + +#define IXP23XX_GPIO_STYLE_MASK 0x7 +#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 +#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 +#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 +#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 +#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 + +#define IXP23XX_GPIO_STYLE_SIZE 3 + + +/**************************************************************************** + * Timer. + ****************************************************************************/ +#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) +#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) +#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) +#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) +#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) +#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) +#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) +#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) +#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) +#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e +#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) +#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) +#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) + +#define IXP23XX_TIMER_ENABLE (1 << 0) +#define IXP23XX_TIMER_ONE_SHOT (1 << 1) +/* Low order bits of reload value ignored */ +#define IXP23XX_TIMER_RELOAD_MASK (0x3) +#define IXP23XX_TIMER_DISABLED (0x0) +#define IXP23XX_TIMER1_INT_PEND (1 << 0) +#define IXP23XX_TIMER2_INT_PEND (1 << 1) +#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) +#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) +#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) + + +/**************************************************************************** + * CAP CSRs. + ****************************************************************************/ +#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) +#define IXP23XX_PROD_IDG IXP23XX_GLOBAL_REG(0x00) +#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) +#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) +#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) +#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) +#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) + +#define IXP23XX_ENABLE_WATCHDOG (1 << 24) +#define IXP23XX_SHPC_INIT_COMP (1 << 21) +#define IXP23XX_RST_ALL (1 << 16) +#define IXP23XX_RESET_PCI (1 << 2) +#define IXP23XX_PCI_UNIT_RESET (1 << 1) +#define IXP23XX_XSCALE_RESET (1 << 0) + + +/**************************************************************************** + * PCI CSRs. + ****************************************************************************/ +#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) +#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) +#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) +#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) + + +#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) +#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) +#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) +#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) +#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) +#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) +#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) +#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) +#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) +#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) +#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) +#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) +#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) +#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) +#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) + + +#ifndef __ASSEMBLY__ +/* + * Is system memory on the XSI or CPP bus? + */ +static inline unsigned ixp23xx_cpp_boot(void) +{ + return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); +} +#endif + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h new file mode 100644 index 000000000000..bebcf0aa0d72 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -0,0 +1,46 @@ +/* + * include/asm-arm/arch-ixp23xx/memory.h + * + * Copyright (c) 2003-2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET (0x00000000) + + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#ifndef __ASSEMBLY__ + +#define __virt_to_bus(v) \ + ({ unsigned int ret; \ + ret = ((__virt_to_phys(v) - 0x00000000) + \ + (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ + ret; }) + +#define __bus_to_virt(b) \ + ({ unsigned int data; \ + data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ + __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) + +#endif + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h new file mode 100644 index 000000000000..f85b4685a491 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/platform.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ixp23xx/platform.h + * + * Various bits of code used by platform-level code. + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASSEMBLY__ + +struct pci_sys_data; + +void ixp23xx_map_io(void); +void ixp23xx_init_irq(void); +void ixp23xx_sys_init(void); +int ixp23xx_pci_setup(int, struct pci_sys_data *); +void ixp23xx_pci_preinit(void); +struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); + +extern struct sys_timer ixp23xx_timer; + +#define IXP23XX_UART_XTAL 14745600 + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h new file mode 100644 index 000000000000..925e6b0c338b --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/system.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-ixp23xx/system.h + * + * Copyright (C) 2003 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +static inline void arch_idle(void) +{ +#if 0 + if (!hlt_counter) + cpu_do_idle(); +#endif +} + +static inline void arch_reset(char mode) +{ + /* First try machine specific support */ + if (machine_is_ixdp2351()) { + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; + (void) *IXDP2351_CPLD_RESET1_REG; + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; + } + + /* Use on-chip reset capability */ + *IXP23XX_RESET0 |= IXP23XX_RST_ALL; +} diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h new file mode 100644 index 000000000000..f6828fdd2883 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/time.h @@ -0,0 +1,3 @@ +/* + * include/asm-arm/arch-ixp23xx/time.h + */ diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h new file mode 100644 index 000000000000..516f72fe6082 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/timex.h @@ -0,0 +1,7 @@ +/* + * include/asm-arm/arch-ixp23xx/timex.h + * + * XScale architecture timex specifications + */ + +#define CLOCK_TICK_RATE 75000000 diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h new file mode 100644 index 000000000000..62623fa9b2f7 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/uncompress.h @@ -0,0 +1,45 @@ +/* + * include/asm-arm/arch-ixp23xx/uncompress.h + * + * Copyright (C) 2002-2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include + +#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) + +static __inline__ void putc(char c) +{ + int j; + + for (j = 0; j < 0x1000; j++) { + if (UART_BASE[UART_LSR] & UART_LSR_THRE) + break; + } + + UART_BASE[UART_TX] = c; +} + +static void putstr(const char *s) +{ + while (*s) { + putc(*s); + if (*s == '\n') + putc('\r'); + s++; + } +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h new file mode 100644 index 000000000000..9f2566658541 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/vmalloc.h @@ -0,0 +1,10 @@ +/* + * include/asm-arm/arch-ixp23xx/vmalloc.h + * + * Copyright (c) 2005 MontaVista Software, Inc. + * + * NPU mappings end at 0xf0000000 and we allocate 64MB for board + * specific static I/O. + */ + +#define VMALLOC_END (0xec000000) diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h index 960c35810a22..09ae6c91be60 100644 --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h @@ -21,26 +21,18 @@ static volatile u32* uart_base; -static __inline__ void putc(char c) +static inline void putc(int c) { /* Check THRE and TEMT bits before we transmit the character. */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE); + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + *uart_base = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static void flush(void) { - while (*s) - { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void __arch_decomp_setup(unsigned long arch_id) diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h index 1caa2b560f53..9fcd40aee3e3 100644 --- a/include/asm-arm/arch-l7200/uncompress.h +++ b/include/asm-arm/arch-l7200/uncompress.h @@ -16,22 +16,17 @@ #define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v)) #define __raw_readb(p) (*(volatile unsigned char *)(p)) -static __inline__ void putc(char c) +static inline void putc(int c) { while(__raw_readb(IO_UART + 0x18) & 0x20 || - __raw_readb(IO_UART + 0x18) & 0x08); + __raw_readb(IO_UART + 0x18) & 0x08) + barrier(); + __raw_writeb(c, IO_UART + 0x00); } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - if (*s == 10) { /* If a LF, add CR */ - putc(10); - putc(13); - } - putc(*(s++)); - } } static __inline__ void arch_decomp_setup(void) diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h index ec8ab67122f3..f8053346f608 100644 --- a/include/asm-arm/arch-lh7a40x/uncompress.h +++ b/include/asm-arm/arch-lh7a40x/uncompress.h @@ -22,20 +22,15 @@ #define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) #define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA)) -static __inline__ void putc (char ch) +static inline void putc(int ch) { while (UART_STATUS & nTxRdy) - ; + barrier(); UART_DATA = ch; } -static void putstr (const char* sz) +static inline void flush(void) { - for (; *sz; ++sz) { - putc (*sz); - if (*sz == '\n') - putc ('\r'); - } } /* NULL functions; we don't presently need them */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h index c718264affbd..ca2c8bec82e7 100644 --- a/include/asm-arm/arch-omap/uncompress.h +++ b/include/asm-arm/arch-omap/uncompress.h @@ -30,8 +30,7 @@ unsigned int system_rev; #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK -static void -putstr(const char *s) +static void putc(int c) { volatile u8 * uart = 0; int shift = 2; @@ -69,16 +68,13 @@ putstr(const char *s) /* * Now, xmit each character */ - while (*s) { - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = *s; - if (*s++ == '\n') { - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = '\r'; - } - } + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = c; +} + +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index 05c4b7027592..67af238a8f8e 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -176,6 +176,7 @@ #elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) #define NR_IRQS (IRQ_BOARD_END) #else @@ -196,6 +197,11 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) +#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) +#define LPD270_USBC_IRQ LPD270_IRQ(2) +#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) +#define LPD270_AC97_IRQ LPD270_IRQ(4) + #define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h new file mode 100644 index 000000000000..501d240ac120 --- /dev/null +++ b/include/asm-arm/arch-pxa/lpd270.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-pxa/lpd270.h + * + * Author: Lennert Buytenhek + * Created: Feb 10, 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_LPD270_H +#define __ASM_ARCH_LPD270_H + +#define LPD270_CPLD_PHYS PXA_CS2_PHYS +#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_SIZE 0x00100000 + +#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) + +/* CPLD registers */ +#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CONTROL LPD270_CPLD_REG(0x00) +#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) +#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) +#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) +#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) +#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) +#define LPD270_EGPIO LPD270_CPLD_REG(0x30) +#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) +#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) + +#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ +#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ +#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ + + +#endif diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index fe38090444e0..178aa2e073ac 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -17,23 +17,18 @@ #define UART FFUART -static __inline__ void putc(char c) +static inline void putc(char c) { - while (!(UART[5] & 0x20)); + while (!(UART[5] & 0x20)) + barrier(); UART[0] = c; } /* * This does not append a newline */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } /* diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index b5e4d360665b..f05631d76743 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -27,22 +27,16 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)) - barrier(); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = '\r'; - } - s++; - } +static inline void flush(void) +{ while (AMBA_UART_FR & (1 << 3)) barrier(); } diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h index 43035fec64d2..06231ede54e5 100644 --- a/include/asm-arm/arch-rpc/uncompress.h +++ b/include/asm-arm/arch-rpc/uncompress.h @@ -67,31 +67,28 @@ extern __attribute__((pure)) struct param_struct *params(void); /* * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) { extern void ll_write_char(char *, char c, char white); int x,y; - unsigned char c; char *ptr; x = params->video_x; y = params->video_y; - while ( ( c = *(unsigned char *)s++ ) != '\0' ) { - if ( c == '\n' ) { + if (c == '\n') { + if (++y >= video_num_lines) + y--; + } else if (c == '\r') { + x = 0; + } else { + ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h); + ll_write_char(ptr, c, white); + if (++x >= video_num_columns) { x = 0; if ( ++y >= video_num_lines ) { y--; } - } else { - ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h); - ll_write_char(ptr, c, white); - if ( ++x >= video_num_columns ) { - x = 0; - if ( ++y >= video_num_lines ) { - y--; - } - } } } @@ -99,6 +96,10 @@ static void putstr(const char *s) params->video_y = y; } +static inline void flush(void) +{ +} + static void error(char *x); /* diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 4367ec054b51..a6f6a0e44afa 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -67,8 +67,7 @@ uart_rd(unsigned int reg) * waiting for tx to happen... */ -static void -putc(char ch) +static void putc(int ch) { int cpuid = S3C2410_GSTATUS1_2410; @@ -77,9 +76,6 @@ putc(char ch) cpuid &= S3C2410_GSTATUS1_IDMASK; #endif - if (ch == '\n') - putc('\r'); /* expand newline to \r\n */ - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -101,19 +97,16 @@ putc(char ch) } else { /* not using fifos */ - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE); + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); } /* write byte to transmission register */ uart_wr(S3C2410_UTXH, ch); } -static void -putstr(const char *ptr) +static inline void flush(void) { - for (; *ptr != '\0'; ptr++) { - putc(*ptr); - } } #define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h index 43453501ee66..2601a77a6dda 100644 --- a/include/asm-arm/arch-sa1100/uncompress.h +++ b/include/asm-arm/arch-sa1100/uncompress.h @@ -17,7 +17,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putstr( const char *s ) +static void putc(int c) { unsigned long serial_port; @@ -31,19 +31,16 @@ static void putstr( const char *s ) return; } while (0); - for (; *s; s++) { - /* wait for space in the UART's transmitter */ - while (!(UART(UTSR1) & UTSR1_TNF)); + /* wait for space in the UART's transmitter */ + while (!(UART(UTSR1) & UTSR1_TNF)) + barrier(); - /* send the character out. */ - UART(UTDR) = *s; + /* send the character out. */ + UART(UTDR) = c; +} - /* if a LF, also do CR... */ - if (*s == 10) { - while (!(UART(UTSR1) & UTSR1_TNF)); - UART(UTDR) = 13; - } - } +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h index 910a8e0a0ca5..7eca6534f1bb 100644 --- a/include/asm-arm/arch-shark/uncompress.h +++ b/include/asm-arm/arch-shark/uncompress.h @@ -9,7 +9,7 @@ #define SERIAL_BASE ((volatile unsigned char *)0x400003f8) -static __inline__ void putc(char c) +static inline void putc(int c) { int t; @@ -18,17 +18,8 @@ static __inline__ void putc(char c) while (t--); } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } #ifdef DEBUG diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h index 2f57499c7b92..7215133d0514 100644 --- a/include/asm-arm/arch-versatile/uncompress.h +++ b/include/asm-arm/arch-versatile/uncompress.h @@ -25,22 +25,16 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)) - barrier(); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = '\r'; - } - s++; - } +static inline void flush(void) +{ while (AMBA_UART_FR & (1 << 3)) barrier(); } diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 09e19a783a51..746be56b1b70 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -71,6 +71,14 @@ # endif #endif +#if defined(CONFIG_CPU_XSC3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xsc3 +# endif +#endif + #if defined(CONFIG_CPU_V6) //# ifdef _CACHE # define MULTI_CACHE 1 diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h index da1d960387d9..f8ea2de4848e 100644 --- a/include/asm-arm/domain.h +++ b/include/asm-arm/domain.h @@ -16,11 +16,29 @@ * DOMAIN_IO - domain 2 includes all IO only * DOMAIN_USER - domain 1 includes all user memory only * DOMAIN_KERNEL - domain 0 includes all kernel memory only + * + * The domain numbering depends on whether we support 36 physical + * address for I/O or not. Addresses above the 32 bit boundary can + * only be mapped using supersections and supersections can only + * be set for domain 0. We could just default to DOMAIN_IO as zero, + * but there may be systems with supersection support and no 36-bit + * addressing. In such cases, we want to map system memory with + * supersections to reduce TLB misses and footprint. + * + * 36-bit addressing and supersections are only available on + * CPUs based on ARMv6+ or the Intel XSC3 core. */ +#ifndef CONFIG_IO_36 #define DOMAIN_KERNEL 0 #define DOMAIN_TABLE 0 #define DOMAIN_USER 1 #define DOMAIN_IO 2 +#else +#define DOMAIN_KERNEL 2 +#define DOMAIN_TABLE 2 +#define DOMAIN_USER 1 +#define DOMAIN_IO 0 +#endif /* * Domain types diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 416320d95419..a404d2bf0c68 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -40,6 +40,7 @@ * v4wb - ARMv4 with writeback cache, without minicache * v4_mc - ARMv4 with minicache * xscale - Xscale + * xsc3 - XScalev3 */ #undef _USER #undef MULTI_USER @@ -84,6 +85,14 @@ # endif #endif +#ifdef CONFIG_CPU_XSC3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xsc3_mc +# endif +#endif + #ifdef CONFIG_CPU_COPY_V6 # define MULTI_USER 1 #endif diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 7bef2bf6be51..106045edb862 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -138,6 +138,14 @@ # define CPU_NAME cpu_xscale # endif # endif +# ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 +# endif +# endif # ifdef CONFIG_CPU_V6 # ifdef CPU_NAME # undef MULTI_CPU diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index ec91d1ff032a..95b3abf4851b 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -108,6 +108,25 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +/* + * Intel's XScale3 core supports some v6 features (supersections, L2) + * but advertises itself as v5 as it does not support the v6 ISA. For + * this reason, we need a way to explicitly test for this type of CPU. + */ +#ifndef CONFIG_CPU_XSC3 +#define cpu_is_xsc3() 0 +#else +static inline int cpu_is_xsc3(void) +{ + extern unsigned int processor_id; + + if ((processor_id & 0xffffe000) == 0x69056000) + return 1; + + return 0; +} +#endif + #define set_cr(x) \ __asm__ __volatile__( \ "mcr p15, 0, %0, c1, c0, 0 @ set CR" \