From c9b4470e2d9d611181fe488fdf463948d8b24901 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 26 Mar 2006 21:40:27 +0100 Subject: [PATCH 01/11] [ARM] 3414/1: ep93xx: reset ethernet controller before uncompressing Patch from Lennert Buytenhek The Redboot version that cirrus supplies for the cirrus ep93xx doesn't turn off DMA from the ethernet MAC before jumping to linux, which means that we might end up with bits of RX status and packet data scribbled over the uncompressed kernel image. Work around this by resetting the ethernet MAC before we uncompress. We don't usually work around bootloader bugs, but considering that the large majority of ep93xx boards out there have this problem, I figured this it was justified in this case. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/arch-ep93xx/uncompress.h | 40 +++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h index 4410d217077e..2171082d4fc5 100644 --- a/include/asm-arm/arch-ep93xx/uncompress.h +++ b/include/asm-arm/arch-ep93xx/uncompress.h @@ -16,11 +16,21 @@ static unsigned char __raw_readb(unsigned int ptr) return *((volatile unsigned char *)ptr); } +static unsigned int __raw_readl(unsigned int ptr) +{ + return *((volatile unsigned int *)ptr); +} + static void __raw_writeb(unsigned char value, unsigned int ptr) { *((volatile unsigned char *)ptr) = value; } +static void __raw_writel(unsigned int value, unsigned int ptr) +{ + *((volatile unsigned int *)ptr) = value; +} + #define PHYS_UART1_DATA 0x808c0000 #define PHYS_UART1_FLAG 0x808c0018 @@ -49,5 +59,33 @@ static void putstr(const char *s) } } -#define arch_decomp_setup() + +/* + * Some bootloaders don't turn off DMA from the ethernet MAC before + * jumping to linux, which means that we might end up with bits of RX + * status and packet data scribbled over the uncompressed kernel image. + * Work around this by resetting the ethernet MAC before we uncompress. + */ +#define PHYS_ETH_SELF_CTL 0x80010020 +#define ETH_SELF_CTL_RESET 0x00000001 + +static void ethernet_reset(void) +{ + unsigned int v; + + /* Reset the ethernet MAC. */ + v = __raw_readl(PHYS_ETH_SELF_CTL); + __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL); + + /* Wait for reset to finish. */ + while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET) + ; +} + + +static void arch_decomp_setup(void) +{ + ethernet_reset(); +} + #define arch_decomp_wdog() From bd8f103efef14980decf5d54a2de85835e9a6d9a Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Sun, 26 Mar 2006 21:40:27 +0100 Subject: [PATCH 02/11] [ARM] 3415/1: Akita: Add missing EXPORT_SYMBOL Patch from Richard Purdie Add an EXPORT_SYMBOL for the Akita IO Expander Device. Signed-off-by: Richard Purdie Signed-off-by: Russell King --- arch/arm/mach-pxa/spitz.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 30ec317bbb97..0dbb079ecd25 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -467,6 +467,8 @@ struct platform_device akitaioexp_device = { .id = -1, }; +EXPORT_SYMBOL_GPL(akitaioexp_device); + static void __init akita_init(void) { spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode; From c8c4b939e8dff82ee2bc22ed506ae29ecffca4c2 Mon Sep 17 00:00:00 2001 From: Erik Mouw Date: Mon, 27 Mar 2006 15:32:30 +0100 Subject: [PATCH 03/11] [ARM] 3416/1: Update LART site URL Patch from Erik Mouw The LART website moved to http://www.lartmaker.nl/. This patch updates the URL in ARM specific files. Signed-off-by: Erik Mouw Acked-by: Jan-Derk Bakker Signed-off-by: Russell King --- Documentation/arm/SA1100/Assabet | 2 +- Documentation/arm/SA1100/LART | 2 +- arch/arm/mach-sa1100/Kconfig | 2 +- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet index cbbe5587c78d..78bc1c1b04e5 100644 --- a/Documentation/arm/SA1100/Assabet +++ b/Documentation/arm/SA1100/Assabet @@ -26,7 +26,7 @@ Installing a bootloader A couple of bootloaders able to boot Linux on Assabet are available: -BLOB (http://www.lart.tudelft.nl/lartware/blob/) +BLOB (http://www.lartmaker.nl/lartware/blob/) BLOB is a bootloader used within the LART project. Some contributed patches were merged into BLOB to add support for Assabet. diff --git a/Documentation/arm/SA1100/LART b/Documentation/arm/SA1100/LART index 2f73f513e16a..6d412b685598 100644 --- a/Documentation/arm/SA1100/LART +++ b/Documentation/arm/SA1100/LART @@ -11,4 +11,4 @@ is under development, with plenty of others in different stages of planning. The hardware designs for this board have been released under an open license; -see the LART page at http://www.lart.tudelft.nl/ for more information. +see the LART page at http://www.lartmaker.nl/ for more information. diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 6923316b3d0d..cd67ab1b217b 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -111,7 +111,7 @@ config SA1100_LART bool "LART" help Say Y here if you are using the Linux Advanced Radio Terminal - (also known as the LART). See for + (also known as the LART). See for information on the LART. config SA1100_PLEB diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index 6435b2e48ffa..d68630b74d78 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -11,7 +11,7 @@ * linux-2.4.5-rmk1 * * This software has been developed while working on the LART - * computing board (http://www.lart.tudelft.nl/), which is + * computing board (http://www.lartmaker.nl/), which is * sponsored by the Mobile Multi-media Communications * (http://www.mmc.tudelft.nl/) and Ubiquitous Communications * (http://www.ubicom.tudelft.nl/) projects. From 4682adcfb06448827fbdfd8b6c636796de569b7d Mon Sep 17 00:00:00 2001 From: "Hyok S. Choi" Date: Mon, 27 Mar 2006 15:46:06 +0100 Subject: [PATCH 04/11] [ARM] nommu: trivial patch for arch/arm/lib/Makefile ifeq ($CONFIG_PREEMPT,y) -> ifeq ($(CONFIG_PREEMPT),y) Signed-off-by: Hyok S. Choi Signed-off-by: Russell King --- arch/arm/lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 391f3ab3ff32..7b726b627ea5 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -18,7 +18,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ # the code in uaccess.S is not preemption safe and # probably faster on ARMv3 only -ifeq ($CONFIG_PREEMPT,y) +ifeq ($(CONFIG_PREEMPT),y) lib-y += copy_from_user.o copy_to_user.o else ifneq ($(CONFIG_CPU_32v3),y) From 3747b36eeab93d8969e86987bbc1d44971229b26 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 27 Mar 2006 16:59:07 +0100 Subject: [PATCH 05/11] [ARM] proc-v6: mark page table walks outer-cacheable, shared. Enable NX. Mark page table walks with outer-cacheable attribute, and enable no-execute in page tables. Signed-off-by: Russell King --- arch/arm/mm/proc-v6.S | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 9a7e7c096aa9..ee6f15298735 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -21,6 +21,14 @@ #define D_CACHE_LINE_SIZE 32 +#define TTB_C (1 << 0) +#define TTB_S (1 << 1) +#define TTB_IMP (1 << 2) +#define TTB_RGN_NC (0 << 3) +#define TTB_RGN_WBWA (1 << 3) +#define TTB_RGN_WT (2 << 3) +#define TTB_RGN_WB (3 << 3) + .macro cpsie, flags .ifc \flags, f .long 0xf1080040 @@ -115,7 +123,7 @@ ENTRY(cpu_v6_switch_mm) mov r2, #0 ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id #ifdef CONFIG_SMP - orr r0, r0, #2 @ set shared pgtable + orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ drain write buffer @@ -161,8 +169,8 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_YOUNG biceq r2, r2, #PTE_EXT_APX | PTE_EXT_AP_MASK -@ tst r1, #L_PTE_EXEC -@ orreq r2, r2, #PTE_EXT_XN + tst r1, #L_PTE_EXEC + orreq r2, r2, #PTE_EXT_XN tst r1, #L_PTE_PRESENT moveq r2, #0 @@ -221,7 +229,7 @@ __v6_setup: mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs mcr p15, 0, r0, c2, c0, 2 @ TTB control register #ifdef CONFIG_SMP - orr r4, r4, #2 @ set shared pgtable + orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable #endif mcr p15, 0, r4, c2, c0, 1 @ load TTB1 #ifdef CONFIG_VFP From a081568d7016061ed848696984e3acf1ba0b3054 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 28 Mar 2006 10:24:33 +0100 Subject: [PATCH 06/11] [ARM] Fix decompressor serial IO to give CRLF not LFCR As per the corresponding change to the serial drivers, arrange for ARM decompressors to give CRLF. Move the common putstr code into misc.c such that machines only need to supply "putc" and "flush" functions. Signed-off-by: Russell King --- arch/arm/boot/compressed/misc.c | 28 +++++++----- include/asm-arm/arch-aaec2000/uncompress.h | 23 +++++----- include/asm-arm/arch-at91rm9200/uncompress.h | 23 +++++----- include/asm-arm/arch-cl7500/uncompress.h | 18 +++----- include/asm-arm/arch-clps711x/uncompress.h | 21 +++------ include/asm-arm/arch-ebsa110/uncompress.h | 47 ++++++++++---------- include/asm-arm/arch-ebsa285/uncompress.h | 16 ++----- include/asm-arm/arch-ep93xx/uncompress.h | 10 +---- include/asm-arm/arch-h720x/uncompress.h | 22 +++++---- include/asm-arm/arch-imx/uncompress.h | 21 +++------ include/asm-arm/arch-integrator/uncompress.h | 21 ++++----- include/asm-arm/arch-iop3xx/uncompress.h | 16 ++----- include/asm-arm/arch-ixp2000/uncompress.h | 15 +++---- include/asm-arm/arch-ixp4xx/uncompress.h | 18 +++----- include/asm-arm/arch-l7200/uncompress.h | 15 +++---- include/asm-arm/arch-lh7a40x/uncompress.h | 11 ++--- include/asm-arm/arch-omap/uncompress.h | 20 ++++----- include/asm-arm/arch-pxa/uncompress.h | 13 ++---- include/asm-arm/arch-realview/uncompress.h | 20 +++------ include/asm-arm/arch-rpc/uncompress.h | 27 +++++------ include/asm-arm/arch-s3c2410/uncompress.h | 15 ++----- include/asm-arm/arch-sa1100/uncompress.h | 21 ++++----- include/asm-arm/arch-shark/uncompress.h | 13 +----- include/asm-arm/arch-versatile/uncompress.h | 20 +++------ 24 files changed, 186 insertions(+), 288 deletions(-) diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 5ab94584baee..28626ec2d289 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -20,24 +20,32 @@ unsigned int __machine_arch_type; #include -#include - #ifdef STANDALONE_DEBUG #define putstr printf -#endif +#else + +static void putstr(const char *ptr); + +#include +#include #ifdef CONFIG_DEBUG_ICEDCC -#define putstr icedcc_putstr -#define putc icedcc_putc - extern void icedcc_putc(int ch); +#define putc(ch) icedcc_putc(ch) +#define flush() do { } while (0) +#endif -static void -icedcc_putstr(const char *ptr) +static void putstr(const char *ptr) { - for (; *ptr != '\0'; ptr++) { - icedcc_putc(*ptr); + char c; + + while ((c = *ptr++) != '\0') { + if (c == '\n') + putc('\r'); + putc(c); } + + flush(); } #endif diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h index fff0c94b75c4..300f4bf3bc74 100644 --- a/include/asm-arm/arch-aaec2000/uncompress.h +++ b/include/asm-arm/arch-aaec2000/uncompress.h @@ -15,7 +15,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putstr( const char *s ) +static void putc(int c) { unsigned long serial_port; do { @@ -28,17 +28,16 @@ static void putstr( const char *s ) return; } while (0); - for (; *s; s++) { - /* wait for space in the UART's transmitter */ - while ((UART(UART_SR) & UART_SR_TxFF)); - /* send the character out. */ - UART(UART_DR) = *s; - /* if a LF, also do CR... */ - if (*s == 10) { - while ((UART(UART_SR) & UART_SR_TxFF)); - UART(UART_DR) = 13; - } - } + /* wait for space in the UART's transmitter */ + while ((UART(UART_SR) & UART_SR_TxFF)) + barrier(); + + /* send the character out. */ + UART(UART_DR) = c; +} + +static inline void flush(void) +{ } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h index b30dd5520713..7b38497c24b5 100644 --- a/include/asm-arm/arch-at91rm9200/uncompress.h +++ b/include/asm-arm/arch-at91rm9200/uncompress.h @@ -31,21 +31,22 @@ * * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) +{ + void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ + + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) + barrier(); + __raw_writel(c, sys + AT91_DBGU_THR); +} + +static inline void flush(void) { void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */ - while (*s) { - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } - __raw_writel(*s, sys + AT91_DBGU_THR); - if (*s == '\n') { - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); } - __raw_writel('\r', sys + AT91_DBGU_THR); - } - s++; - } /* wait for transmission to complete */ - while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) { barrier(); } + while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) + barrier(); } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-cl7500/uncompress.h b/include/asm-arm/arch-cl7500/uncompress.h index 68601b3e3b95..c437e0c88c3f 100644 --- a/include/asm-arm/arch-cl7500/uncompress.h +++ b/include/asm-arm/arch-cl7500/uncompress.h @@ -3,27 +3,19 @@ * * Copyright (C) 1999, 2000 Nexus Electronics Ltd. */ - #define BASE 0x03010000 #define SERBASE (BASE + (0x2f8 << 2)) -static __inline__ void putc(char c) +static inline void putc(char c) { - while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)); + while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20)) + barrier(); + *((volatile unsigned int *)(SERBASE)) = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void arch_decomp_setup(void) diff --git a/include/asm-arm/arch-clps711x/uncompress.h b/include/asm-arm/arch-clps711x/uncompress.h index 9fc4bcfa1681..07157b7e4b20 100644 --- a/include/asm-arm/arch-clps711x/uncompress.h +++ b/include/asm-arm/arch-clps711x/uncompress.h @@ -25,7 +25,6 @@ #undef CLPS7111_BASE #define CLPS7111_BASE CLPS7111_PHYS_BASE -#define barrier() __asm__ __volatile__("": : :"memory") #define __raw_readl(p) (*(unsigned long *)(p)) #define __raw_writel(v,p) (*(unsigned long *)(p) = (v)) @@ -40,21 +39,15 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - char c; + while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) + barrier(); + clps_writel(c, UARTDRx); +} - while ((c = *s++) != '\0') { - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel(c, UARTDRx); - - if (c == '\n') { - while (clps_readl(SYSFLGx) & SYSFLG_UTXFF) - barrier(); - clps_writel('\r', UARTDRx); - } - } +static inline void flush(void) +{ while (clps_readl(SYSFLGx) & SYSFLG_UBUSY) barrier(); } diff --git a/include/asm-arm/arch-ebsa110/uncompress.h b/include/asm-arm/arch-ebsa110/uncompress.h index eee95581a923..66b19c7fd908 100644 --- a/include/asm-arm/arch-ebsa110/uncompress.h +++ b/include/asm-arm/arch-ebsa110/uncompress.h @@ -8,33 +8,34 @@ * published by the Free Software Foundation. */ +#include + +#define SERIAL_BASE ((unsigned char *)0xfe000be0) + /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - unsigned long tmp1, tmp2; - __asm__ __volatile__( - "ldrb %0, [%2], #1\n" -" teq %0, #0\n" -" beq 3f\n" -"1: strb %0, [%3]\n" -"2: ldrb %1, [%3, #0x14]\n" -" and %1, %1, #0x60\n" -" teq %1, #0x60\n" -" bne 2b\n" -" teq %0, #'\n'\n" -" moveq %0, #'\r'\n" -" beq 1b\n" -" ldrb %0, [%2], #1\n" -" teq %0, #0\n" -" bne 1b\n" -"3: ldrb %1, [%3, #0x14]\n" -" and %1, %1, #0x60\n" -" teq %1, #0x60\n" -" bne 3b" - : "=&r" (tmp1), "=&r" (tmp2) - : "r" (s), "r" (0xf0000be0) : "cc"); + unsigned char v, *base = SERIAL_BASE; + + do { + v = base[UART_LSR << 2]; + barrier(); + } while (!(v & UART_LSR_THRE)); + + base[UART_TX << 2] = c; +} + +static inline void flush(void) +{ + unsigned char v, *base = SERIAL_BASE; + + do { + v = base[UART_LSR << 2]; + barrier(); + } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) != + (UART_LSR_TEMT|UART_LSR_THRE)); } /* diff --git a/include/asm-arm/arch-ebsa285/uncompress.h b/include/asm-arm/arch-ebsa285/uncompress.h index c2fd84e2d90e..86142c882b3a 100644 --- a/include/asm-arm/arch-ebsa285/uncompress.h +++ b/include/asm-arm/arch-ebsa285/uncompress.h @@ -15,10 +15,11 @@ #define DC21285_BASE ((volatile unsigned int *)0x42000160) #define SER0_BASE ((volatile unsigned char *)0x7c0003f8) -static __inline__ void putc(char c) +static inline void putc(char c) { if (machine_is_netwinder()) { - while ((SER0_BASE[5] & 0x60) != 0x60); + while ((SER0_BASE[5] & 0x60) != 0x60) + barrier(); SER0_BASE[0] = c; } else { while (DC21285_BASE[6] & 8); @@ -26,17 +27,8 @@ static __inline__ void putc(char c) } } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } /* diff --git a/include/asm-arm/arch-ep93xx/uncompress.h b/include/asm-arm/arch-ep93xx/uncompress.h index 2171082d4fc5..c15274c85d5d 100644 --- a/include/asm-arm/arch-ep93xx/uncompress.h +++ b/include/asm-arm/arch-ep93xx/uncompress.h @@ -36,7 +36,7 @@ static void __raw_writel(unsigned int value, unsigned int ptr) #define PHYS_UART1_FLAG 0x808c0018 #define UART1_FLAG_TXFF 0x20 -static __inline__ void putc(char c) +static inline void putc(int c) { int i; @@ -49,14 +49,8 @@ static __inline__ void putc(char c) __raw_writeb(c, PHYS_UART1_DATA); } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } diff --git a/include/asm-arm/arch-h720x/uncompress.h b/include/asm-arm/arch-h720x/uncompress.h index 9535764bcc71..18c69e0f3585 100644 --- a/include/asm-arm/arch-h720x/uncompress.h +++ b/include/asm-arm/arch-h720x/uncompress.h @@ -12,22 +12,20 @@ #define LSR 0x14 #define TEMPTY 0x40 -static void putstr(const char *s) +static inline void putc(int c) { - char c; volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000); - while ( (c = *s++) != '\0') { - /* wait until transmit buffer is empty */ - while((p[LSR] & TEMPTY) == 0x0); - /* write next character */ - *p = c; + /* wait until transmit buffer is empty */ + while((p[LSR] & TEMPTY) == 0x0) + barrier(); - if(c == '\n') { - while((p[LSR] & TEMPTY) == 0x0); - *p = '\r'; - } - } + /* write next character */ + *p = c; +} + +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-imx/uncompress.h b/include/asm-arm/arch-imx/uncompress.h index 096077f2750b..da333f69136f 100644 --- a/include/asm-arm/arch-imx/uncompress.h +++ b/include/asm-arm/arch-imx/uncompress.h @@ -39,8 +39,7 @@ * * This does not append a newline */ -static void -putstr(const char *s) +static void putc(int c) { unsigned long serial_port; @@ -54,20 +53,14 @@ putstr(const char *s) return; } while(0); - while (*s) { - while ( !(UART(USR2) & USR2_TXFE) ) - barrier(); + while (!(UART(USR2) & USR2_TXFE)) + barrier(); - UART(TXR) = *s; + UART(TXR) = c; +} - if (*s == '\n') { - while ( !(UART(USR2) & USR2_TXFE) ) - barrier(); - - UART(TXR) = '\r'; - } - s++; - } +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-integrator/uncompress.h b/include/asm-arm/arch-integrator/uncompress.h index 3957402741d3..f61825c4d901 100644 --- a/include/asm-arm/arch-integrator/uncompress.h +++ b/include/asm-arm/arch-integrator/uncompress.h @@ -28,21 +28,18 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)); - - AMBA_UART_DR = '\r'; - } - s++; - } - while (AMBA_UART_FR & (1 << 3)); +static inline void flush(void) +{ + while (AMBA_UART_FR & (1 << 3)) + barrier(); } /* diff --git a/include/asm-arm/arch-iop3xx/uncompress.h b/include/asm-arm/arch-iop3xx/uncompress.h index 82b88762c3cc..c98eb6254b1f 100644 --- a/include/asm-arm/arch-iop3xx/uncompress.h +++ b/include/asm-arm/arch-iop3xx/uncompress.h @@ -19,23 +19,15 @@ static volatile UTYPE uart_base; #define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) -static __inline__ void putc(char c) +static inline void putc(char c) { - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE); + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); *uart_base = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void __arch_decomp_setup(unsigned long arch_id) diff --git a/include/asm-arm/arch-ixp2000/uncompress.h b/include/asm-arm/arch-ixp2000/uncompress.h index 3d3d5b2ed6e9..f66b408f363e 100644 --- a/include/asm-arm/arch-ixp2000/uncompress.h +++ b/include/asm-arm/arch-ixp2000/uncompress.h @@ -29,23 +29,18 @@ #define UARTSR PHYS(0x14) /* Status reg */ -static __inline__ void putc(char c) +static inline void putc(int c) { int j = 0x1000; - while (--j && !(*UARTSR & UART_LSR_THRE)); + while (--j && !(*UARTSR & UART_LSR_THRE)) + barrier(); + *UARTDR = c; } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) - { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } #define arch_decomp_setup() diff --git a/include/asm-arm/arch-ixp4xx/uncompress.h b/include/asm-arm/arch-ixp4xx/uncompress.h index 960c35810a22..09ae6c91be60 100644 --- a/include/asm-arm/arch-ixp4xx/uncompress.h +++ b/include/asm-arm/arch-ixp4xx/uncompress.h @@ -21,26 +21,18 @@ static volatile u32* uart_base; -static __inline__ void putc(char c) +static inline void putc(int c) { /* Check THRE and TEMT bits before we transmit the character. */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE); + while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) + barrier(); + *uart_base = c; } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static void flush(void) { - while (*s) - { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } static __inline__ void __arch_decomp_setup(unsigned long arch_id) diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h index 1caa2b560f53..9fcd40aee3e3 100644 --- a/include/asm-arm/arch-l7200/uncompress.h +++ b/include/asm-arm/arch-l7200/uncompress.h @@ -16,22 +16,17 @@ #define __raw_writeb(v,p) (*(volatile unsigned char *)(p) = (v)) #define __raw_readb(p) (*(volatile unsigned char *)(p)) -static __inline__ void putc(char c) +static inline void putc(int c) { while(__raw_readb(IO_UART + 0x18) & 0x20 || - __raw_readb(IO_UART + 0x18) & 0x08); + __raw_readb(IO_UART + 0x18) & 0x08) + barrier(); + __raw_writeb(c, IO_UART + 0x00); } -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - if (*s == 10) { /* If a LF, add CR */ - putc(10); - putc(13); - } - putc(*(s++)); - } } static __inline__ void arch_decomp_setup(void) diff --git a/include/asm-arm/arch-lh7a40x/uncompress.h b/include/asm-arm/arch-lh7a40x/uncompress.h index ec8ab67122f3..f8053346f608 100644 --- a/include/asm-arm/arch-lh7a40x/uncompress.h +++ b/include/asm-arm/arch-lh7a40x/uncompress.h @@ -22,20 +22,15 @@ #define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS)) #define UART_DATA (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA)) -static __inline__ void putc (char ch) +static inline void putc(int ch) { while (UART_STATUS & nTxRdy) - ; + barrier(); UART_DATA = ch; } -static void putstr (const char* sz) +static inline void flush(void) { - for (; *sz; ++sz) { - putc (*sz); - if (*sz == '\n') - putc ('\r'); - } } /* NULL functions; we don't presently need them */ diff --git a/include/asm-arm/arch-omap/uncompress.h b/include/asm-arm/arch-omap/uncompress.h index c718264affbd..ca2c8bec82e7 100644 --- a/include/asm-arm/arch-omap/uncompress.h +++ b/include/asm-arm/arch-omap/uncompress.h @@ -30,8 +30,7 @@ unsigned int system_rev; #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK -static void -putstr(const char *s) +static void putc(int c) { volatile u8 * uart = 0; int shift = 2; @@ -69,16 +68,13 @@ putstr(const char *s) /* * Now, xmit each character */ - while (*s) { - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = *s; - if (*s++ == '\n') { - while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) - barrier(); - uart[UART_TX << shift] = '\r'; - } - } + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = c; +} + +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index fe38090444e0..178aa2e073ac 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -17,23 +17,18 @@ #define UART FFUART -static __inline__ void putc(char c) +static inline void putc(char c) { - while (!(UART[5] & 0x20)); + while (!(UART[5] & 0x20)) + barrier(); UART[0] = c; } /* * This does not append a newline */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } /* diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index b5e4d360665b..f05631d76743 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -27,22 +27,16 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)) - barrier(); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = '\r'; - } - s++; - } +static inline void flush(void) +{ while (AMBA_UART_FR & (1 << 3)) barrier(); } diff --git a/include/asm-arm/arch-rpc/uncompress.h b/include/asm-arm/arch-rpc/uncompress.h index 43035fec64d2..06231ede54e5 100644 --- a/include/asm-arm/arch-rpc/uncompress.h +++ b/include/asm-arm/arch-rpc/uncompress.h @@ -67,31 +67,28 @@ extern __attribute__((pure)) struct param_struct *params(void); /* * This does not append a newline */ -static void putstr(const char *s) +static void putc(int c) { extern void ll_write_char(char *, char c, char white); int x,y; - unsigned char c; char *ptr; x = params->video_x; y = params->video_y; - while ( ( c = *(unsigned char *)s++ ) != '\0' ) { - if ( c == '\n' ) { + if (c == '\n') { + if (++y >= video_num_lines) + y--; + } else if (c == '\r') { + x = 0; + } else { + ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h); + ll_write_char(ptr, c, white); + if (++x >= video_num_columns) { x = 0; if ( ++y >= video_num_lines ) { y--; } - } else { - ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h); - ll_write_char(ptr, c, white); - if ( ++x >= video_num_columns ) { - x = 0; - if ( ++y >= video_num_lines ) { - y--; - } - } } } @@ -99,6 +96,10 @@ static void putstr(const char *s) params->video_y = y; } +static inline void flush(void) +{ +} + static void error(char *x); /* diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index 4367ec054b51..a6f6a0e44afa 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -67,8 +67,7 @@ uart_rd(unsigned int reg) * waiting for tx to happen... */ -static void -putc(char ch) +static void putc(int ch) { int cpuid = S3C2410_GSTATUS1_2410; @@ -77,9 +76,6 @@ putc(char ch) cpuid &= S3C2410_GSTATUS1_IDMASK; #endif - if (ch == '\n') - putc('\r'); /* expand newline to \r\n */ - if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -101,19 +97,16 @@ putc(char ch) } else { /* not using fifos */ - while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE); + while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE) + barrier(); } /* write byte to transmission register */ uart_wr(S3C2410_UTXH, ch); } -static void -putstr(const char *ptr) +static inline void flush(void) { - for (; *ptr != '\0'; ptr++) { - putc(*ptr); - } } #define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) diff --git a/include/asm-arm/arch-sa1100/uncompress.h b/include/asm-arm/arch-sa1100/uncompress.h index 43453501ee66..2601a77a6dda 100644 --- a/include/asm-arm/arch-sa1100/uncompress.h +++ b/include/asm-arm/arch-sa1100/uncompress.h @@ -17,7 +17,7 @@ #define UART(x) (*(volatile unsigned long *)(serial_port + (x))) -static void putstr( const char *s ) +static void putc(int c) { unsigned long serial_port; @@ -31,19 +31,16 @@ static void putstr( const char *s ) return; } while (0); - for (; *s; s++) { - /* wait for space in the UART's transmitter */ - while (!(UART(UTSR1) & UTSR1_TNF)); + /* wait for space in the UART's transmitter */ + while (!(UART(UTSR1) & UTSR1_TNF)) + barrier(); - /* send the character out. */ - UART(UTDR) = *s; + /* send the character out. */ + UART(UTDR) = c; +} - /* if a LF, also do CR... */ - if (*s == 10) { - while (!(UART(UTSR1) & UTSR1_TNF)); - UART(UTDR) = 13; - } - } +static inline void flush(void) +{ } /* diff --git a/include/asm-arm/arch-shark/uncompress.h b/include/asm-arm/arch-shark/uncompress.h index 910a8e0a0ca5..7eca6534f1bb 100644 --- a/include/asm-arm/arch-shark/uncompress.h +++ b/include/asm-arm/arch-shark/uncompress.h @@ -9,7 +9,7 @@ #define SERIAL_BASE ((volatile unsigned char *)0x400003f8) -static __inline__ void putc(char c) +static inline void putc(int c) { int t; @@ -18,17 +18,8 @@ static __inline__ void putc(char c) while (t--); } -/* - * This does not append a newline - */ -static void putstr(const char *s) +static inline void flush(void) { - while (*s) { - putc(*s); - if (*s == '\n') - putc('\r'); - s++; - } } #ifdef DEBUG diff --git a/include/asm-arm/arch-versatile/uncompress.h b/include/asm-arm/arch-versatile/uncompress.h index 2f57499c7b92..7215133d0514 100644 --- a/include/asm-arm/arch-versatile/uncompress.h +++ b/include/asm-arm/arch-versatile/uncompress.h @@ -25,22 +25,16 @@ /* * This does not append a newline */ -static void putstr(const char *s) +static inline void putc(int c) { - while (*s) { - while (AMBA_UART_FR & (1 << 5)) - barrier(); + while (AMBA_UART_FR & (1 << 5)) + barrier(); - AMBA_UART_DR = *s; + AMBA_UART_DR = c; +} - if (*s == '\n') { - while (AMBA_UART_FR & (1 << 5)) - barrier(); - - AMBA_UART_DR = '\r'; - } - s++; - } +static inline void flush(void) +{ while (AMBA_UART_FR & (1 << 3)) barrier(); } From de4533a04eb4f66dbef71f59a9c118256b886823 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 28 Mar 2006 10:34:05 +0100 Subject: [PATCH 07/11] [ARM] Move ice-dcc code into misc.c Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 4 ---- arch/arm/boot/compressed/ice-dcc.S | 17 ----------------- arch/arm/boot/compressed/misc.c | 15 ++++++++++++++- 3 files changed, 14 insertions(+), 22 deletions(-) delete mode 100644 arch/arm/boot/compressed/ice-dcc.S diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 35ffe0f4ece7..2adc1527e0eb 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -50,10 +50,6 @@ ifeq ($(CONFIG_ARCH_AT91RM9200),y) OBJS += head-at91rm9200.o endif -ifeq ($(CONFIG_DEBUG_ICEDCC),y) -OBJS += ice-dcc.o -endif - ifeq ($(CONFIG_CPU_BIG_ENDIAN),y) OBJS += big-endian.o endif diff --git a/arch/arm/boot/compressed/ice-dcc.S b/arch/arm/boot/compressed/ice-dcc.S deleted file mode 100644 index 104377a199bb..000000000000 --- a/arch/arm/boot/compressed/ice-dcc.S +++ /dev/null @@ -1,17 +0,0 @@ - - - .text - - .global icedcc_putc - -icedcc_putc: - mov r2, #0x4000000 -1: - subs r2, r2, #1 - movlt pc, r14 - mrc p14, 0, r1, c0, c0, 0 - tst r1, #2 - bne 1b - - mcr p14, 0, r0, c1, c0, 0 - mov pc, r14 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 28626ec2d289..0af3772efcb7 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -30,7 +30,20 @@ static void putstr(const char *ptr); #include #ifdef CONFIG_DEBUG_ICEDCC -extern void icedcc_putc(int ch); +static void icedcc_putc(int ch) +{ + int status, i = 0x4000000; + + do { + if (--i < 0) + return; + + asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status)); + } while (status & 2); + + asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch)); +} + #define putc(ch) icedcc_putc(ch) #define flush() do { } while (0) #endif From 23bdf86aa06ebe71bcbf6b7d25de9958c6ab33fa Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 28 Mar 2006 21:00:40 +0100 Subject: [PATCH 08/11] [ARM] 3377/2: add support for intel xsc3 core Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by: Deepak Saxena Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Makefile | 1 + arch/arm/mm/Kconfig | 19 +- arch/arm/mm/Makefile | 2 + arch/arm/mm/copypage-xsc3.S | 97 +++++++ arch/arm/mm/mm-armv.c | 3 +- arch/arm/mm/proc-xsc3.S | 498 +++++++++++++++++++++++++++++++++++ include/asm-arm/cacheflush.h | 8 + include/asm-arm/domain.h | 18 ++ include/asm-arm/page.h | 9 + include/asm-arm/proc-fns.h | 8 + include/asm-arm/system.h | 19 ++ 11 files changed, 680 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mm/copypage-xsc3.S create mode 100644 arch/arm/mm/proc-xsc3.S diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 99c0d323719a..0f571d3d2fa4 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -57,6 +57,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale +tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) ifeq ($(CONFIG_AEABI),y) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e680c5fd93b5..c55b739e10ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -239,6 +239,17 @@ config CPU_XSCALE select CPU_CACHE_VIVT select CPU_TLB_V4WBI +# XScale Core Version 3 +config CPU_XSC3 + bool + depends on ARCH_IXP23XX + default y + select CPU_32v5 + select CPU_ABRT_EV5T + select CPU_CACHE_VIVT + select CPU_TLB_V4WBI + select IO_36 + # ARMv6 config CPU_V6 bool "Support ARM V6 processor" @@ -361,11 +372,17 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool +# +# CPU supports 36-bit I/O +# +config IO_36 + bool + comment "Processor Features" config ARM_THUMB bool "Support Thumb user binaries" - depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_V6 + depends on CPU_ARM720T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_V6 default y help Say Y if you want to include kernel support for running user space diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index ffe73ba2bf17..07a538505784 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_CPU_COPY_V4WB) += copypage-v4wb.o obj-$(CONFIG_CPU_COPY_V6) += copypage-v6.o mmu.o obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o +obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o @@ -51,4 +52,5 @@ obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o obj-$(CONFIG_CPU_SA110) += proc-sa110.o obj-$(CONFIG_CPU_SA1100) += proc-sa1100.o obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o +obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o obj-$(CONFIG_CPU_V6) += proc-v6.o diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S new file mode 100644 index 000000000000..9a2cb4332b4c --- /dev/null +++ b/arch/arm/mm/copypage-xsc3.S @@ -0,0 +1,97 @@ +/* + * linux/arch/arm/lib/copypage-xsc3.S + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adapted for 3rd gen XScale core, no more mini-dcache + * Author: Matt Gilbert (matthew.m.gilbert@intel.com) + */ + +#include +#include +#include + +/* + * General note: + * We don't really want write-allocate cache behaviour for these functions + * since that will just eat through 8K of the cache. + */ + + .text + .align 5 +/* + * XSC3 optimised copy_user_page + * r0 = destination + * r1 = source + * r2 = virtual user address of ultimate destination page + * + * The source page may have some clean entries in the cache already, but we + * can safely ignore them - break_cow() will flush them out of the cache + * if we eventually end up using our copied page. + * + */ +ENTRY(xsc3_mc_copy_user_page) + stmfd sp!, {r4, r5, lr} + mov lr, #PAGE_SZ/64-1 + + pld [r1, #0] + pld [r1, #32] +1: pld [r1, #64] + pld [r1, #96] + +2: ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + ldrd r2, [r1], #8 + mov ip, r0 + ldrd r4, [r1], #8 + mcr p15, 0, ip, c7, c6, 1 @ invalidate + strd r2, [r0], #8 + ldrd r2, [r1], #8 + subs lr, lr, #1 + strd r4, [r0], #8 + ldrd r4, [r1], #8 + strd r2, [r0], #8 + strd r4, [r0], #8 + bgt 1b + beq 2b + + ldmfd sp!, {r4, r5, pc} + + .align 5 +/* + * XScale optimised clear_user_page + * r0 = destination + * r1 = virtual user address of ultimate destination page + */ +ENTRY(xsc3_mc_clear_user_page) + mov r1, #PAGE_SZ/32 + mov r2, #0 + mov r3, #0 +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate line + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + strd r2, [r0], #8 + subs r1, r1, #1 + bne 1b + mov pc, lr + + __INITDATA + + .type xsc3_mc_user_fns, #object +ENTRY(xsc3_mc_user_fns) + .long xsc3_mc_clear_user_page + .long xsc3_mc_copy_user_page + .size xsc3_mc_user_fns, . - xsc3_mc_user_fns diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index ef8d30a185a9..5e5d05bcad50 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -557,7 +557,8 @@ void __init create_mapping(struct map_desc *md) * supersections are only allocated for domain 0 regardless * of the actual domain assignments in use. */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) { + if ((cpu_architecture() >= CPU_ARCH_ARMv6 || cpu_is_xsc3()) + && domain == 0) { /* * Align to supersection boundary if !high pages. * High pages have already been checked for proper diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S new file mode 100644 index 000000000000..f90513e9af0c --- /dev/null +++ b/arch/arm/mm/proc-xsc3.S @@ -0,0 +1,498 @@ +/* + * linux/arch/arm/mm/proc-xsc3.S + * + * Original Author: Matthew Gilbert + * Current Maintainer: Deepak Saxena + * + * Copyright 2004 (C) Intel Corp. + * Copyright 2005 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an + * extension to Intel's original XScale core that adds the following + * features: + * + * - ARMv6 Supersections + * - Low Locality Reference pages (replaces mini-cache) + * - 36-bit addressing + * - L2 cache + * - Cache-coherency if chipset supports it + * + * Based on orignal XScale code by Nicolas Pitre + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be flushed. If the + * area is larger than this, then we flush the whole cache. + */ +#define MAX_AREA_SIZE 32768 + +/* + * The cache line size of the I and D cache. + */ +#define CACHELINESIZE 32 + +/* + * The size of the data cache. + */ +#define CACHESIZE 32768 + +/* + * Run with L2 enabled. + */ +#define L2_CACHE_ENABLE 1 + +/* + * Enable the Branch Target Buffer (can cause crashes, see erratum #42.) + */ +#define BTB_ENABLE 0 + +/* + * This macro is used to wait for a CP15 write and is needed + * when we have to ensure that the last operation to the co-pro + * was completed before continuing with operation. + */ + .macro cpwait_ret, lr, rd + mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 + sub pc, \lr, \rd, LSR #32 @ wait for completion and + @ flush instruction pipeline + .endm + +/* + * This macro cleans & invalidates the entire xsc3 dcache by set & way. + */ + + .macro clean_d_cache rd, rs + mov \rd, #0x1f00 + orr \rd, \rd, #0x00e0 +1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way + adds \rd, \rd, #0x40000000 + bcc 1b + subs \rd, \rd, #0x20 + bpl 1b + .endm + + .text + +/* + * cpu_xsc3_proc_init() + * + * Nothing too exciting at the moment + */ +ENTRY(cpu_xsc3_proc_init) + mov pc, lr + +/* + * cpu_xsc3_proc_fin() + */ +ENTRY(cpu_xsc3_proc_fin) + str lr, [sp, #-4]! + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + bl xsc3_flush_kern_cache_all @ clean caches + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1800 @ ...IZ........... + bic r0, r0, #0x0006 @ .............CA. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldr pc, [sp], #4 + +/* + * cpu_xsc3_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_xsc3_reset) + mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r1 @ reset CPSR + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x0086 @ ........B....CA. + bic r1, r1, #0x3900 @ ..VIZ..S........ + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB + bic r1, r1, #0x0001 @ ...............M + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + @ CAUTION: MMU turned off from this point. We count on the pipeline + @ already containing those two last instructions to survive. + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, r0 + +/* + * cpu_xsc3_do_idle() + * + * Cause the processor to idle + * + * For now we do nothing but go to idle mode for every case + * + * XScale supports clock switching, but using idle mode support + * allows external hardware to react to system state changes. + + MMG: Come back to this one. + */ + .align 5 + +ENTRY(cpu_xsc3_do_idle) + mov r0, #1 + mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE + mov pc, lr + +/* ================================= CACHE ================================ */ + +/* + * flush_user_cache_all() + * + * Invalidate all cache entries in a particular address + * space. + */ +ENTRY(xsc3_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(xsc3_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: + clean_d_cache r0, r1 + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_user_cache_range(start, end, vm_flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_area_struct describing address space + */ + .align 5 +ENTRY(xsc3_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #MAX_AREA_SIZE + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC + mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line + mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * Note: single I-cache line invalidation isn't used here since + * it also trashes the mini I-cache used by JTAG debuggers. + */ +ENTRY(xsc3_coherent_kern_range) +/* FALLTHROUGH */ +ENTRY(xsc3_coherent_user_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(xsc3_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_inv_range) + tst r0, #CACHELINESIZE - 1 + bic r0, r0, #CACHELINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry + tst r1, #CACHELINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry + mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_clean_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry + mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xsc3_dma_flush_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line + mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line + mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + +ENTRY(xsc3_cache_fns) + .long xsc3_flush_kern_cache_all + .long xsc3_flush_user_cache_all + .long xsc3_flush_user_cache_range + .long xsc3_coherent_kern_range + .long xsc3_coherent_user_range + .long xsc3_flush_kern_dcache_page + .long xsc3_dma_inv_range + .long xsc3_dma_clean_range + .long xsc3_dma_flush_range + +ENTRY(cpu_xsc3_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + subs r1, r1, #CACHELINESIZE + bhi 1b + mov pc, lr + +/* =============================== PageTable ============================== */ + +/* + * cpu_xsc3_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_xsc3_switch_mm) + clean_d_cache r1, r2 + mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush +#ifdef L2_CACHE_ENABLE + orr r0, r0, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + cpwait_ret lr, ip + +/* + * cpu_xsc3_set_pte(ptep, pte) + * + * Set a PTE and flush it out + * + */ + .align 5 +ENTRY(cpu_xsc3_set_pte) + str r1, [r0], #-2048 @ linux version + + bic r2, r1, #0xff0 + orr r2, r2, #PTE_TYPE_EXT @ extended page + + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + tst r3, #L_PTE_USER @ User? + orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w + + tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w + @ combined with user -> user r/w + +#if L2_CACHE_ENABLE + @ If its cacheable it needs to be in L2 also. + eor ip, r1, #L_PTE_CACHEABLE + tst ip, #L_PTE_CACHEABLE + orreq r2, r2, #PTE_EXT_TEX(0x5) +#endif + + tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 @ no -> fault + + str r2, [r0] @ hardware version + mov ip, #0 + mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mov pc, lr + + .ltorg + + .align + + __INIT + + .type __xsc3_setup, #function +__xsc3_setup: + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer + mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush + mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs +#if L2_CACHE_ENABLE + orr r4, r4, #0x18 @ cache the page table in L2 +#endif + mcr p15, 0, r4, c2, c0, 0 @ load page table pointer + mov r0, #1 @ Allow access to CP0 and CP13 + orr r0, r0, #1 << 13 @ Its undefined whether this + mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg + and r0, r0, #2 @ preserve bit P bit setting +#if L2_CACHE_ENABLE + orr r0, r0, #(1 << 10) @ enable L2 for LLR cache +#endif + mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg + mrc p15, 0, r0, c1, c0, 0 @ get control register + bic r0, r0, #0x0200 @ .... ..R. .... .... + bic r0, r0, #0x0002 @ .... .... .... ..A. + orr r0, r0, #0x0005 @ .... .... .... .C.M +#if BTB_ENABLE + orr r0, r0, #0x3900 @ ..VI Z..S .... .... +#else + orr r0, r0, #0x3100 @ ..VI ...S .... .... +#endif +#if L2_CACHE_ENABLE + orr r0, r0, #0x4000000 @ L2 enable +#endif + mov pc, lr + + .size __xsc3_setup, . - __xsc3_setup + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + + .type xsc3_processor_functions, #object +ENTRY(xsc3_processor_functions) + .word v5t_early_abort + .word cpu_xsc3_proc_init + .word cpu_xsc3_proc_fin + .word cpu_xsc3_reset + .word cpu_xsc3_do_idle + .word cpu_xsc3_dcache_clean_area + .word cpu_xsc3_switch_mm + .word cpu_xsc3_set_pte + .size xsc3_processor_functions, . - xsc3_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_xsc3_name, #object +cpu_xsc3_name: + .asciz "XScale-Core3" + .size cpu_xsc3_name, . - cpu_xsc3_name + + .align + + .section ".proc.info.init", #alloc, #execinstr + + .type __xsc3_proc_info,#object +__xsc3_proc_info: + .long 0x69056000 + .long 0xffffe000 + .long 0x00000c0e + b __xsc3_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_xsc3_name + .long xsc3_processor_functions + .long v4wbi_tlb_fns + .long xsc3_mc_user_fns + .long xsc3_cache_fns + .size __xsc3_proc_info, . - __xsc3_proc_info diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 09e19a783a51..746be56b1b70 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -71,6 +71,14 @@ # endif #endif +#if defined(CONFIG_CPU_XSC3) +# ifdef _CACHE +# define MULTI_CACHE 1 +# else +# define _CACHE xsc3 +# endif +#endif + #if defined(CONFIG_CPU_V6) //# ifdef _CACHE # define MULTI_CACHE 1 diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h index da1d960387d9..f8ea2de4848e 100644 --- a/include/asm-arm/domain.h +++ b/include/asm-arm/domain.h @@ -16,11 +16,29 @@ * DOMAIN_IO - domain 2 includes all IO only * DOMAIN_USER - domain 1 includes all user memory only * DOMAIN_KERNEL - domain 0 includes all kernel memory only + * + * The domain numbering depends on whether we support 36 physical + * address for I/O or not. Addresses above the 32 bit boundary can + * only be mapped using supersections and supersections can only + * be set for domain 0. We could just default to DOMAIN_IO as zero, + * but there may be systems with supersection support and no 36-bit + * addressing. In such cases, we want to map system memory with + * supersections to reduce TLB misses and footprint. + * + * 36-bit addressing and supersections are only available on + * CPUs based on ARMv6+ or the Intel XSC3 core. */ +#ifndef CONFIG_IO_36 #define DOMAIN_KERNEL 0 #define DOMAIN_TABLE 0 #define DOMAIN_USER 1 #define DOMAIN_IO 2 +#else +#define DOMAIN_KERNEL 2 +#define DOMAIN_TABLE 2 +#define DOMAIN_USER 1 +#define DOMAIN_IO 0 +#endif /* * Domain types diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 416320d95419..a404d2bf0c68 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -40,6 +40,7 @@ * v4wb - ARMv4 with writeback cache, without minicache * v4_mc - ARMv4 with minicache * xscale - Xscale + * xsc3 - XScalev3 */ #undef _USER #undef MULTI_USER @@ -84,6 +85,14 @@ # endif #endif +#ifdef CONFIG_CPU_XSC3 +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER xsc3_mc +# endif +#endif + #ifdef CONFIG_CPU_COPY_V6 # define MULTI_USER 1 #endif diff --git a/include/asm-arm/proc-fns.h b/include/asm-arm/proc-fns.h index 7bef2bf6be51..106045edb862 100644 --- a/include/asm-arm/proc-fns.h +++ b/include/asm-arm/proc-fns.h @@ -138,6 +138,14 @@ # define CPU_NAME cpu_xscale # endif # endif +# ifdef CONFIG_CPU_XSC3 +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_xsc3 +# endif +# endif # ifdef CONFIG_CPU_V6 # ifdef CPU_NAME # undef MULTI_CPU diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index ec91d1ff032a..95b3abf4851b 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -108,6 +108,25 @@ extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); extern void cpu_init(void); +/* + * Intel's XScale3 core supports some v6 features (supersections, L2) + * but advertises itself as v5 as it does not support the v6 ISA. For + * this reason, we need a way to explicitly test for this type of CPU. + */ +#ifndef CONFIG_CPU_XSC3 +#define cpu_is_xsc3() 0 +#else +static inline int cpu_is_xsc3(void) +{ + extern unsigned int processor_id; + + if ((processor_id & 0xffffe000) == 0x69056000) + return 1; + + return 0; +} +#endif + #define set_cr(x) \ __asm__ __volatile__( \ "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ From fa5ebfccf30741dc432cb81c25bb591c8018eb18 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 28 Mar 2006 21:02:26 +0100 Subject: [PATCH 09/11] [ARM] 3387/1: ixp23xx: add defconfig Patch from Lennert Buytenhek Add ixp23xx defconfig. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/configs/ixp23xx_defconfig | 1302 ++++++++++++++++++++++++++++ 1 file changed, 1302 insertions(+) create mode 100644 arch/arm/configs/ixp23xx_defconfig diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig new file mode 100644 index 000000000000..1a2751e9ab05 --- /dev/null +++ b/arch/arm/configs/ixp23xx_defconfig @@ -0,0 +1,1302 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.16 +# Tue Mar 21 03:27:20 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_UID16=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set +CONFIG_OBSOLETE_INTERMODULE=y + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +CONFIG_ARCH_IXP23XX=y +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_AT91RM9200 is not set +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y + +# +# Intel IXP23xx Implementation Options +# + +# +# IXP23xx Platforms +# +CONFIG_MACH_ESPRESSO=y +CONFIG_MACH_IXDP2351=y +CONFIG_MACH_ROADRUNNER=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSC3=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_IO_36=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_CPU_BIG_ENDIAN=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +CONFIG_E1000_NAPI=y +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +CONFIG_WAN=y +# CONFIG_DSCC4 is not set +# CONFIG_LANMEDIA is not set +# CONFIG_SYNCLINK_SYNCPPP is not set +CONFIG_HDLC=y +CONFIG_HDLC_RAW=y +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=y +CONFIG_HDLC_FR=y +CONFIG_HDLC_PPP=y + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300 is not set +# CONFIG_FARSYNC is not set +CONFIG_DLCI=y +CONFIG_DLCI_COUNT=24 +CONFIG_DLCI_MAX=8 +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y From e9937d4b0a9382c4c78411d1c53e62be396ee9a9 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 28 Mar 2006 21:08:13 +0100 Subject: [PATCH 10/11] [ARM] 3417/1: add support for logicpd pxa270 card engine Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 5 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/lpd270.c | 393 ++++++++++++++++++++++++++++++ include/asm-arm/arch-pxa/irqs.h | 6 + include/asm-arm/arch-pxa/lpd270.h | 38 +++ 5 files changed, 443 insertions(+) create mode 100644 arch/arm/mach-pxa/lpd270.c create mode 100644 include/asm-arm/arch-pxa/lpd270.h diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index c1d77f5b3823..0104fd142e70 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -10,6 +10,11 @@ config ARCH_LUBBOCK select PXA25x select SA1111 +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" + select PXA27x + select IWMMXT + config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 382644401a4d..4e8a983e2b83 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o # Specific board support obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o +obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c new file mode 100644 index 000000000000..ec0f43a102c7 --- /dev/null +++ b/arch/arm/mach-pxa/lpd270.c @@ -0,0 +1,393 @@ +/* + * linux/arch/arm/mach-pxa/lpd270.c + * + * Support for the LogicPD PXA270 Card Engine. + * Derived from the mainstone code, which carries these notices: + * + * Author: Nicolas Pitre + * Created: Nov 05, 2002 + * Copyright: MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "generic.h" + + +static unsigned int lpd270_irq_enabled; + +static void lpd270_mask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS); + + lpd270_irq_enabled &= ~(1 << lpd270_irq); + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static void lpd270_unmask_irq(unsigned int irq) +{ + int lpd270_irq = irq - LPD270_IRQ(0); + + lpd270_irq_enabled |= 1 << lpd270_irq; + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); +} + +static struct irqchip lpd270_irq_chip = { + .ack = lpd270_mask_irq, + .mask = lpd270_mask_irq, + .unmask = lpd270_unmask_irq, +}; + +static void lpd270_irq_handler(unsigned int irq, struct irqdesc *desc, + struct pt_regs *regs) +{ + unsigned long pending; + + pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled; + do { + GEDR(0) = GPIO_bit(0); /* clear useless edge notification */ + if (likely(pending)) { + irq = LPD270_IRQ(0) + __ffs(pending); + desc = irq_desc + irq; + desc_handle_irq(irq, desc, regs); + + pending = __raw_readw(LPD270_INT_STATUS) & + lpd270_irq_enabled; + } + } while (pending); +} + +static void __init lpd270_init_irq(void) +{ + int irq; + + pxa_init_irq(); + + __raw_writew(0, LPD270_INT_MASK); + __raw_writew(0, LPD270_INT_STATUS); + + /* setup extra LogicPD PXA270 irqs */ + for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) { + set_irq_chip(irq, &lpd270_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); + set_irq_type(IRQ_GPIO(0), IRQT_FALLING); +} + + +#ifdef CONFIG_PM +static int lpd270_irq_resume(struct sys_device *dev) +{ + __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK); + return 0; +} + +static struct sysdev_class lpd270_irq_sysclass = { + set_kset_name("cpld_irq"), + .resume = lpd270_irq_resume, +}; + +static struct sys_device lpd270_irq_device = { + .cls = &lpd270_irq_sysclass, +}; + +static int __init lpd270_irq_device_init(void) +{ + int ret = sysdev_class_register(&lpd270_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lpd270_irq_device); + return ret; +} + +device_initcall(lpd270_irq_device_init); +#endif + + +static struct resource smc91x_resources[] = { + [0] = { + .start = LPD270_ETH_PHYS, + .end = (LPD270_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = LPD270_ETHERNET_IRQ, + .end = LPD270_ETHERNET_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device lpd270_audio_device = { + .name = "pxa2xx-ac97", + .id = -1, +}; + +static struct resource lpd270_flash_resources[] = { + [0] = { + .start = PXA_CS0_PHYS, + .end = PXA_CS0_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = PXA_CS1_PHYS, + .end = PXA_CS1_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct mtd_partition lpd270_flash0_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, { + .name = "Kernel", + .size = 0x00400000, + .offset = 0x00040000, + }, { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00440000 + }, +}; + +static struct flash_platform_data lpd270_flash_data[2] = { + { + .name = "processor-flash", + .map_name = "cfi_probe", + .parts = lpd270_flash0_partitions, + .nr_parts = ARRAY_SIZE(lpd270_flash0_partitions), + }, { + .name = "mainboard-flash", + .map_name = "cfi_probe", + .parts = NULL, + .nr_parts = 0, + } +}; + +static struct platform_device lpd270_flash_device[2] = { + { + .name = "pxa2xx-flash", + .id = 0, + .dev = { + .platform_data = &lpd270_flash_data[0], + }, + .resource = &lpd270_flash_resources[0], + .num_resources = 1, + }, { + .name = "pxa2xx-flash", + .id = 1, + .dev = { + .platform_data = &lpd270_flash_data[1], + }, + .resource = &lpd270_flash_resources[1], + .num_resources = 1, + }, +}; + +static void lpd270_backlight_power(int on) +{ + if (on) { + pxa_gpio_mode(GPIO16_PWM0_MD); + pxa_set_cken(CKEN0_PWM0, 1); + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x3ff; + PWM_PERVAL0 = 0x3ff; + } else { + PWM_CTRL0 = 0; + PWM_PWDUTY0 = 0x0; + PWM_PERVAL0 = 0x3FF; + pxa_set_cken(CKEN0_PWM0, 0); + } +} + +/* 5.7" TFT QVGA (LoLo display number 1) */ +static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 64, + .left_margin = 0x27, + .right_margin = 0x09, + .vsync_len = 0x04, + .upper_margin = 0x08, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 6.4" TFT VGA (LoLo display number 5) */ +static struct pxafb_mach_info sharp_lq64d343 __initdata = { + .pixclock = 20000, + .xres = 640, + .yres = 480, + .bpp = 16, + .hsync_len = 49, + .left_margin = 0x89, + .right_margin = 0x19, + .vsync_len = 18, + .upper_margin = 0x22, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .lccr0 = 0x07800080, + .lccr3 = 0x04400001, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +/* 3.5" TFT QVGA (LoLo display number 8) */ +static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = { + .pixclock = 100000, + .xres = 240, + .yres = 320, + .bpp = 16, + .hsync_len = 0x34, + .left_margin = 0x09, + .right_margin = 0x09, + .vsync_len = 0x08, + .upper_margin = 0x05, + .lower_margin = 0x14, + .sync = 0, + .lccr0 = 0x07800080, + .lccr3 = 0x04400007, + .pxafb_backlight_power = lpd270_backlight_power, +}; + +static struct platform_device *platform_devices[] __initdata = { + &smc91x_device, + &lpd270_audio_device, + &lpd270_flash_device[0], + &lpd270_flash_device[1], +}; + +static int lpd270_ohci_init(struct device *dev) +{ + /* setup Port1 GPIO pin. */ + pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN); /* USBHPWR1 */ + pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */ + + /* Set the Power Control Polarity Low and Power Sense + Polarity Low to active low. */ + UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & + ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + return 0; +} + +static struct pxaohci_platform_data lpd270_ohci_platform_data = { + .port_mode = PMM_PERPORT_MODE, + .init = lpd270_ohci_init, +}; + +static void __init lpd270_init(void) +{ + lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4; + lpd270_flash_data[1].width = 4; + + /* + * System bus arbiter setting: + * - Core_Park + * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4 + */ + ARB_CNTRL = ARB_CORE_PARK | 0x234; + + /* + * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45. + */ + pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + // set_pxa_fb_info(&sharp_lq057q3dc02); + set_pxa_fb_info(&sharp_lq64d343); + // set_pxa_fb_info(&sharp_lq035q7db02_20); + + pxa_set_ohci_info(&lpd270_ohci_platform_data); +} + + +static struct map_desc lpd270_io_desc[] __initdata = { + { + .virtual = LPD270_CPLD_VIRT, + .pfn = __phys_to_pfn(LPD270_CPLD_PHYS), + .length = LPD270_CPLD_SIZE, + .type = MT_DEVICE, + }, +}; + +static void __init lpd270_map_io(void) +{ + pxa_map_io(); + iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc)); + + /* initialize sleep mode regs (wake-up sources, etc) */ + PGSR0 = 0x00008800; + PGSR1 = 0x00000002; + PGSR2 = 0x0001FC00; + PGSR3 = 0x00001F81; + PWER = 0xC0000002; + PRER = 0x00000002; + PFER = 0x00000002; + + /* for use I SRAM as framebuffer. */ + PSLR |= 0x00000F04; + PCFR = 0x00000066; +} + +MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") + /* Maintainer: Peter Barada */ + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = lpd270_map_io, + .init_irq = lpd270_init_irq, + .timer = &pxa_timer, + .init_machine = lpd270_init, +MACHINE_END diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index 05c4b7027592..67af238a8f8e 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -176,6 +176,7 @@ #elif defined(CONFIG_SHARP_LOCOMO) #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) #define NR_IRQS (IRQ_BOARD_END) #else @@ -196,6 +197,11 @@ #define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */ #define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6) +#define LPD270_IRQ(x) (IRQ_BOARD_START + (x)) +#define LPD270_USBC_IRQ LPD270_IRQ(2) +#define LPD270_ETHERNET_IRQ LPD270_IRQ(3) +#define LPD270_AC97_IRQ LPD270_IRQ(4) + #define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x)) #define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0) #define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1) diff --git a/include/asm-arm/arch-pxa/lpd270.h b/include/asm-arm/arch-pxa/lpd270.h new file mode 100644 index 000000000000..501d240ac120 --- /dev/null +++ b/include/asm-arm/arch-pxa/lpd270.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-pxa/lpd270.h + * + * Author: Lennert Buytenhek + * Created: Feb 10, 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_LPD270_H +#define __ASM_ARCH_LPD270_H + +#define LPD270_CPLD_PHYS PXA_CS2_PHYS +#define LPD270_CPLD_VIRT 0xf0000000 +#define LPD270_CPLD_SIZE 0x00100000 + +#define LPD270_ETH_PHYS (PXA_CS2_PHYS + 0x01000000) + +/* CPLD registers */ +#define LPD270_CPLD_REG(x) ((unsigned long)(LPD270_CPLD_VIRT + (x))) +#define LPD270_CONTROL LPD270_CPLD_REG(0x00) +#define LPD270_PERIPHERAL0 LPD270_CPLD_REG(0x04) +#define LPD270_PERIPHERAL1 LPD270_CPLD_REG(0x08) +#define LPD270_CPLD_REVISION LPD270_CPLD_REG(0x14) +#define LPD270_EEPROM_SPI_ITF LPD270_CPLD_REG(0x20) +#define LPD270_MODE_PINS LPD270_CPLD_REG(0x24) +#define LPD270_EGPIO LPD270_CPLD_REG(0x30) +#define LPD270_INT_MASK LPD270_CPLD_REG(0x40) +#define LPD270_INT_STATUS LPD270_CPLD_REG(0x50) + +#define LPD270_INT_AC97 (1 << 4) /* AC'97 CODEC IRQ */ +#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */ +#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */ + + +#endif From c4713074375c61f939310b04e92090afe29810dc Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 28 Mar 2006 21:18:54 +0100 Subject: [PATCH 11/11] [ARM] 3388/1: ixp23xx: add core ixp23xx support Patch from Lennert Buytenhek This patch adds support for the Intel ixp23xx series of CPUs. The ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit MACs, two 10/100 MACs, expansion bus, four microengines, a Media and Switch Fabric unit almost identical to the one on the ixp2400, two xscale (8250ish) UARTs and a bunch of other stuff. This patch adds the core ixp23xx support code, and support for the ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double Espresso platforms. Signed-off-by: Deepak Saxena Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/Kconfig | 11 +- arch/arm/Makefile | 1 + arch/arm/mach-ixp23xx/Kconfig | 25 ++ arch/arm/mach-ixp23xx/Makefile | 11 + arch/arm/mach-ixp23xx/Makefile.boot | 2 + arch/arm/mach-ixp23xx/core.c | 431 +++++++++++++++++++++ arch/arm/mach-ixp23xx/espresso.c | 69 ++++ arch/arm/mach-ixp23xx/ixdp2351.c | 325 ++++++++++++++++ arch/arm/mach-ixp23xx/pci.c | 275 +++++++++++++ arch/arm/mach-ixp23xx/roadrunner.c | 164 ++++++++ include/asm-arm/arch-ixp23xx/debug-macro.S | 23 ++ include/asm-arm/arch-ixp23xx/dma.h | 3 + include/asm-arm/arch-ixp23xx/entry-macro.S | 31 ++ include/asm-arm/arch-ixp23xx/hardware.h | 37 ++ include/asm-arm/arch-ixp23xx/io.h | 54 +++ include/asm-arm/arch-ixp23xx/irqs.h | 223 +++++++++++ include/asm-arm/arch-ixp23xx/ixdp2351.h | 89 +++++ include/asm-arm/arch-ixp23xx/ixp23xx.h | 306 +++++++++++++++ include/asm-arm/arch-ixp23xx/memory.h | 46 +++ include/asm-arm/arch-ixp23xx/platform.h | 31 ++ include/asm-arm/arch-ixp23xx/system.h | 33 ++ include/asm-arm/arch-ixp23xx/time.h | 3 + include/asm-arm/arch-ixp23xx/timex.h | 7 + include/asm-arm/arch-ixp23xx/uncompress.h | 45 +++ include/asm-arm/arch-ixp23xx/vmalloc.h | 10 + 25 files changed, 2254 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-ixp23xx/Kconfig create mode 100644 arch/arm/mach-ixp23xx/Makefile create mode 100644 arch/arm/mach-ixp23xx/Makefile.boot create mode 100644 arch/arm/mach-ixp23xx/core.c create mode 100644 arch/arm/mach-ixp23xx/espresso.c create mode 100644 arch/arm/mach-ixp23xx/ixdp2351.c create mode 100644 arch/arm/mach-ixp23xx/pci.c create mode 100644 arch/arm/mach-ixp23xx/roadrunner.c create mode 100644 include/asm-arm/arch-ixp23xx/debug-macro.S create mode 100644 include/asm-arm/arch-ixp23xx/dma.h create mode 100644 include/asm-arm/arch-ixp23xx/entry-macro.S create mode 100644 include/asm-arm/arch-ixp23xx/hardware.h create mode 100644 include/asm-arm/arch-ixp23xx/io.h create mode 100644 include/asm-arm/arch-ixp23xx/irqs.h create mode 100644 include/asm-arm/arch-ixp23xx/ixdp2351.h create mode 100644 include/asm-arm/arch-ixp23xx/ixp23xx.h create mode 100644 include/asm-arm/arch-ixp23xx/memory.h create mode 100644 include/asm-arm/arch-ixp23xx/platform.h create mode 100644 include/asm-arm/arch-ixp23xx/system.h create mode 100644 include/asm-arm/arch-ixp23xx/time.h create mode 100644 include/asm-arm/arch-ixp23xx/timex.h create mode 100644 include/asm-arm/arch-ixp23xx/uncompress.h create mode 100644 include/asm-arm/arch-ixp23xx/vmalloc.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0dd24ebdf6ac..427c72140110 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -148,6 +148,12 @@ config ARCH_IXP2000 help Support for Intel's IXP2400/2800 (XScale) family of processors. +config ARCH_IXP23XX + bool "IXP23XX-based" + select PCI + help + Support for Intel's IXP23xx (XScale) family of processors. + config ARCH_L7200 bool "LinkUp-L7200" select FIQ @@ -269,6 +275,8 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-ixp2000/Kconfig" +source "arch/arm/mach-ixp23xx/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/mach-sa1100/Kconfig" @@ -787,7 +795,8 @@ source "drivers/acorn/block/Kconfig" if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \ - || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE + || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \ + || ARCH_IXP23XX source "drivers/ide/Kconfig" endif diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0f571d3d2fa4..ce3e804ea0f3 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -98,6 +98,7 @@ endif machine-$(CONFIG_ARCH_IOP3XX) := iop3xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_IXP2000) := ixp2000 + machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 incdir-$(CONFIG_ARCH_OMAP) := omap diff --git a/arch/arm/mach-ixp23xx/Kconfig b/arch/arm/mach-ixp23xx/Kconfig new file mode 100644 index 000000000000..982670ec3866 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Kconfig @@ -0,0 +1,25 @@ +if ARCH_IXP23XX + +config ARCH_SUPPORTS_BIG_ENDIAN + bool + default y + +menu "Intel IXP23xx Implementation Options" + +comment "IXP23xx Platforms" + +config MACH_ESPRESSO + bool "Support IP Fabrics Double Espresso platform" + help + +config MACH_IXDP2351 + bool "Support Intel IXDP2351 platform" + help + +config MACH_ROADRUNNER + bool "Support ADI RoadRunner platform" + help + +endmenu + +endif diff --git a/arch/arm/mach-ixp23xx/Makefile b/arch/arm/mach-ixp23xx/Makefile new file mode 100644 index 000000000000..288b371b6d03 --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the linux kernel. +# +obj-y := core.o pci.o +obj-m := +obj-n := +obj- := + +obj-$(CONFIG_MACH_ESPRESSO) += espresso.o +obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o +obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o diff --git a/arch/arm/mach-ixp23xx/Makefile.boot b/arch/arm/mach-ixp23xx/Makefile.boot new file mode 100644 index 000000000000..d5561ad15bad --- /dev/null +++ b/arch/arm/mach-ixp23xx/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c new file mode 100644 index 000000000000..092ee12ced42 --- /dev/null +++ b/arch/arm/mach-ixp23xx/core.c @@ -0,0 +1,431 @@ +/* + * arch/arm/mach-ixp23xx/core.c + * + * Core routines for IXP23xx chips + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +/************************************************************************* + * Chip specific mappings shared by all IXP23xx systems + *************************************************************************/ +static struct map_desc ixp23xx_io_desc[] __initdata = { + { /* XSI-CPP CSRs */ + .virtual = IXP23XX_XSI2CPP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS), + .length = IXP23XX_XSI2CPP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* Expansion Bus Config */ + .virtual = IXP23XX_EXP_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS), + .length = IXP23XX_EXP_CFG_SIZE, + .type = MT_DEVICE, + }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */ + .virtual = IXP23XX_PERIPHERAL_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS), + .length = IXP23XX_PERIPHERAL_SIZE, + .type = MT_DEVICE, + }, { /* CAP CSRs */ + .virtual = IXP23XX_CAP_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS), + .length = IXP23XX_CAP_CSR_SIZE, + .type = MT_DEVICE, + }, { /* MSF CSRs */ + .virtual = IXP23XX_MSF_CSR_VIRT, + .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS), + .length = IXP23XX_MSF_CSR_SIZE, + .type = MT_DEVICE, + }, { /* PCI I/O Space */ + .virtual = IXP23XX_PCI_IO_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS), + .length = IXP23XX_PCI_IO_SIZE, + .type = MT_DEVICE, + }, { /* PCI Config Space */ + .virtual = IXP23XX_PCI_CFG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS), + .length = IXP23XX_PCI_CFG_SIZE, + .type = MT_DEVICE, + }, { /* PCI local CFG CSRs */ + .virtual = IXP23XX_PCI_CREG_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS), + .length = IXP23XX_PCI_CREG_SIZE, + .type = MT_DEVICE, + }, { /* PCI MEM Space */ + .virtual = IXP23XX_PCI_MEM_VIRT, + .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS), + .length = IXP23XX_PCI_MEM_SIZE, + .type = MT_DEVICE, + } +}; + +void __init ixp23xx_map_io(void) +{ + iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc)); +} + + +/*************************************************************************** + * IXP23xx Interrupt Handling + ***************************************************************************/ +enum ixp23xx_irq_type { + IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE +}; + +static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type); + +static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + u32 int_style; + enum ixp23xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only GPIOs 6-15 are wired to interrupts on IXP23xx + */ + if (line < 6 || line > 15) + return -EINVAL; + + switch (type) { + case IRQT_BOTHEDGE: + int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_RISING: + int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_FALLING: + int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP23XX_IRQ_EDGE; + break; + case IRQT_HIGH: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP23XX_IRQ_LEVEL; + break; + case IRQT_LOW: + int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP23XX_IRQ_LEVEL; + break; + default: + return -EINVAL; + } + + ixp23xx_config_irq(irq, irq_type); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R; + } + + /* + * Clear pending interrupts + */ + *IXP23XX_GPIO_GPISR = (1 << line); + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK << + (line * IXP23XX_GPIO_STYLE_SIZE)); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE)); + + return 0; +} + +static void ixp23xx_irq_mask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg &= ~(1 << (irq % 32)); +} + +static void ixp23xx_irq_ack(unsigned int irq) +{ + int line = irq - IRQ_IXP23XX_GPIO6 + 6; + + if ((line < 6) || (line > 15)) + return; + + *IXP23XX_GPIO_GPISR = (1 << line); +} + +/* + * Level triggered interrupts on GPIO lines can only be cleared when the + * interrupt condition disappears. + */ +static void ixp23xx_irq_level_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + ixp23xx_irq_ack(irq); + + *intr_reg |= (1 << (irq % 32)); +} + +static void ixp23xx_irq_edge_unmask(unsigned int irq) +{ + volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32); + + *intr_reg |= (1 << (irq % 32)); +} + +static struct irqchip ixp23xx_irq_level_chip = { + .ack = ixp23xx_irq_mask, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_level_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static struct irqchip ixp23xx_irq_edge_chip = { + .ack = ixp23xx_irq_ack, + .mask = ixp23xx_irq_mask, + .unmask = ixp23xx_irq_edge_unmask, + .set_type = ixp23xx_irq_set_type +}; + +static void ixp23xx_pci_irq_mask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +static void ixp23xx_pci_irq_unmask(unsigned int irq) +{ + *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq)); +} + +/* + * TODO: Should this just be done at ASM level? + */ +static void pci_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u32 pci_interrupt; + unsigned int irqno; + struct irqdesc *int_desc; + + pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS; + + desc->chip->ack(irq); + + /* See which PCI_INTA, or PCI_INTB interrupted */ + if (pci_interrupt & (1 << 26)) { + irqno = IRQ_IXP23XX_INTB; + } else if (pci_interrupt & (1 << 27)) { + irqno = IRQ_IXP23XX_INTA; + } else { + BUG(); + } + + int_desc = irq_desc + irqno; + int_desc->handle(irqno, int_desc, regs); + + desc->chip->unmask(irq); +} + +static struct irqchip ixp23xx_pci_irq_chip = { + .ack = ixp23xx_pci_irq_mask, + .mask = ixp23xx_pci_irq_mask, + .unmask = ixp23xx_pci_irq_unmask +}; + +static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type) +{ + switch (type) { + case IXP23XX_IRQ_LEVEL: + set_irq_chip(irq, &ixp23xx_irq_level_chip); + set_irq_handler(irq, do_level_IRQ); + break; + case IXP23XX_IRQ_EDGE: + set_irq_chip(irq, &ixp23xx_irq_edge_chip); + set_irq_handler(irq, do_edge_IRQ); + break; + } + set_irq_flags(irq, IRQF_VALID); +} + +void __init ixp23xx_init_irq(void) +{ + int irq; + + /* Route everything to IRQ */ + *IXP23XX_INTR_SEL1 = 0x0; + *IXP23XX_INTR_SEL2 = 0x0; + *IXP23XX_INTR_SEL3 = 0x0; + *IXP23XX_INTR_SEL4 = 0x0; + + /* Mask all sources */ + *IXP23XX_INTR_EN1 = 0x0; + *IXP23XX_INTR_EN2 = 0x0; + *IXP23XX_INTR_EN3 = 0x0; + *IXP23XX_INTR_EN4 = 0x0; + + /* + * Configure all IRQs for level-sensitive operation + */ + for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) { + ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL); + } + + for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) { + set_irq_chip(irq, &ixp23xx_pci_irq_chip); + set_irq_handler(irq, do_level_IRQ); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler); +} + + +/************************************************************************* + * Timer-tick functions for IXP23xx + *************************************************************************/ +#define CLOCK_TICKS_PER_USEC CLOCK_TICK_RATE / (USEC_PER_SEC) + +static unsigned long next_jiffy_time; + +static unsigned long +ixp23xx_gettimeoffset(void) +{ + unsigned long elapsed; + + elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH); + + return elapsed / CLOCK_TICKS_PER_USEC; +} + +static irqreturn_t +ixp23xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + while ((*IXP23XX_TIMER_CONT - next_jiffy_time) > LATCH) { + timer_tick(regs); + next_jiffy_time += LATCH; + } + + return IRQ_HANDLED; +} + +static struct irqaction ixp23xx_timer_irq = { + .name = "IXP23xx Timer Tick", + .handler = ixp23xx_timer_interrupt, + .flags = SA_INTERRUPT | SA_TIMER, +}; + +void __init ixp23xx_init_timer(void) +{ + /* Clear Pending Interrupt by writing '1' to it */ + *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND; + + /* Setup the Timer counter value */ + *IXP23XX_TIMER1_RELOAD = + (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE; + + *IXP23XX_TIMER_CONT = 0; + next_jiffy_time = LATCH; + + /* Connect the interrupt handler and enable the interrupt */ + setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq); +} + +struct sys_timer ixp23xx_timer = { + .init = ixp23xx_init_timer, + .offset = ixp23xx_gettimeoffset, +}; + + +/************************************************************************* + * IXP23xx Platform Initializaion + *************************************************************************/ +static struct resource ixp23xx_uart_resources[] = { + { + .start = IXP23XX_UART1_PHYS, + .end = IXP23XX_UART1_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, { + .start = IXP23XX_UART2_PHYS, + .end = IXP23XX_UART2_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port ixp23xx_uart_data[] = { + { + .mapbase = IXP23XX_UART1_PHYS, + .membase = (char *)(IXP23XX_UART1_VIRT + 3), + .irq = IRQ_IXP23XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, { + .mapbase = IXP23XX_UART2_PHYS, + .membase = (char *)(IXP23XX_UART2_VIRT + 3), + .irq = IRQ_IXP23XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP23XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device ixp23xx_uart = { + .name = "serial8250", + .id = 0, + .dev.platform_data = ixp23xx_uart_data, + .num_resources = 2, + .resource = ixp23xx_uart_resources, +}; + +static struct platform_device *ixp23xx_devices[] __initdata = { + &ixp23xx_uart, +}; + +void __init ixp23xx_sys_init(void) +{ + platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices)); +} diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c new file mode 100644 index 000000000000..2327c9790416 --- /dev/null +++ b/arch/arm/mach-ixp23xx/espresso.c @@ -0,0 +1,69 @@ +/* + * arch/arm/mach-ixp23xx/espresso.c + * + * Double Espresso-specific routines + * + * Author: Lennert Buytenhek + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static void __init espresso_init(void) +{ + physmap_configure(0x90000000, 0x02000000, 2, NULL); + + /* + * Mark flash as writeable. + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso") + /* Maintainer: Lennert Buytenhek */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = espresso_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c new file mode 100644 index 000000000000..00146c35daac --- /dev/null +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -0,0 +1,325 @@ +/* + * arch/arm/mach-ixp23xx/ixdp2351.c + * + * IXDP2351 board-specific routines + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2004 (c) Intel Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * IXDP2351 Interrupt Handling + */ +static void ixdp2351_inta_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(irq); +} + +static void ixdp2351_inta_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; + int i; + + desc->chip->mask(irq); + + for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_inta_chip = { + .ack = ixdp2351_inta_mask, + .mask = ixdp2351_inta_mask, + .unmask = ixdp2351_inta_unmask +}; + +static void ixdp2351_intb_mask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_unmask(unsigned int irq) +{ + *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(irq); +} + +static void ixdp2351_intb_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs) +{ + u16 ex_interrupt = + *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; + int i; + + desc->chip->ack(irq); + + for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { + if (ex_interrupt & (1 << i)) { + struct irqdesc *cpld_desc; + int cpld_irq = + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); + cpld_desc = irq_desc + cpld_irq; + cpld_desc->handle(cpld_irq, cpld_desc, regs); + } + } + + desc->chip->unmask(irq); +} + +static struct irqchip ixdp2351_intb_chip = { + .ack = ixdp2351_intb_mask, + .mask = ixdp2351_intb_mask, + .unmask = ixdp2351_intb_unmask +}; + +void ixdp2351_init_irq(void) +{ + int irq; + + /* Mask all interrupts from CPLD, disable simulation */ + *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; + *IXDP2351_CPLD_INTA_SIM_REG = 0; + *IXDP2351_CPLD_INTB_SIM_REG = 0; + + ixp23xx_init_irq(); + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); + irq++) { + if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_inta_chip); + } + } + + for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); + irq < + IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); + irq++) { + if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { + set_irq_flags(irq, IRQF_VALID); + set_irq_handler(irq, do_level_IRQ); + set_irq_chip(irq, &ixdp2351_intb_chip); + } + } + + set_irq_chained_handler(IRQ_IXP23XX_INTA, &ixdp2351_inta_handler); + set_irq_chained_handler(IRQ_IXP23XX_INTB, &ixdp2351_intb_handler); +} + +/* + * IXDP2351 PCI + */ + +/* + * This board does not do normal PCI IRQ routing, or any + * sort of swizzling, so we just need to check where on the + * bus the device is and figure out what CPLD pin it is + * being routed to. + */ +#define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) + +static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + u8 bus = dev->bus->number; + u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); + struct pci_bus *tmp_bus = dev->bus; + + /* Primary bus, no interrupts here */ + if (!bus) + return -1; + + /* Lookup first leaf in bus tree */ + while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) + tmp_bus = tmp_bus->parent; + + /* Select between known bridges */ + switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { + /* Device is located after first bridge */ + case 0x0008: + if (tmp_bus == dev->bus) { + /* Device is located directy after first bridge */ + switch (devpin) { + /* Onboard 82546 */ + case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ + return IRQ_IXDP2351_INTA_82546; + case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ + return IRQ_IXDP2351_INTB_82546; + /* PMC SLOT */ + case DEVPIN(0, 1): /* PMCP INTA# */ + case DEVPIN(2, 4): /* PMCS INTD# */ + return IRQ_IXDP2351_SPCI_PMC_INTA; + case DEVPIN(0, 2): /* PMCP INTB# */ + case DEVPIN(2, 1): /* PMCS INTA# */ + return IRQ_IXDP2351_SPCI_PMC_INTB; + case DEVPIN(0, 3): /* PMCP INTC# */ + case DEVPIN(2, 2): /* PMCS INTB# */ + return IRQ_IXDP2351_SPCI_PMC_INTC; + case DEVPIN(0, 4): /* PMCP INTD# */ + case DEVPIN(2, 3): /* PMCS INTC# */ + return IRQ_IXDP2351_SPCI_PMC_INTD; + } + } else { + /* Device is located indirectly after first bridge */ + /* Not supported now */ + return -1; + } + break; + case 0x0010: + if (tmp_bus == dev->bus) { + /* Device is located directy after second bridge */ + /* Secondary bus of second bridge */ + switch (devpin) { + case DEVPIN(0, 1): /* DB#0 */ + case DEVPIN(0, 2): + case DEVPIN(0, 3): + case DEVPIN(0, 4): + return IRQ_IXDP2351_SPCI_DB_0; + case DEVPIN(1, 1): /* DB#1 */ + case DEVPIN(1, 2): + case DEVPIN(1, 3): + case DEVPIN(1, 4): + return IRQ_IXDP2351_SPCI_DB_1; + case DEVPIN(2, 1): /* FIC1 */ + case DEVPIN(2, 2): + case DEVPIN(2, 3): + case DEVPIN(2, 4): + case DEVPIN(3, 1): /* FIC2 */ + case DEVPIN(3, 2): + case DEVPIN(3, 3): + case DEVPIN(3, 4): + return IRQ_IXDP2351_SPCI_FIC; + } + } else { + /* Device is located indirectly after second bridge */ + /* Not supported now */ + return -1; + } + break; + } + + return -1; +} + +struct hw_pci ixdp2351_pci __initdata = { + .nr_controllers = 1, + .preinit = ixp23xx_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = ixdp2351_map_irq, +}; + +int __init ixdp2351_pci_init(void) +{ + if (machine_is_ixdp2351()) + pci_common_init(&ixdp2351_pci); + + return 0; +} + +subsys_initcall(ixdp2351_pci_init); + +/* + * IXDP2351 Static Mapped I/O + */ +static struct map_desc ixdp2351_io_desc[] __initdata = { + { + .virtual = IXDP2351_NP_VIRT_BASE, + .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), + .length = IXDP2351_NP_PHYS_SIZE, + .type = MT_DEVICE + }, { + .virtual = IXDP2351_BB_BASE_VIRT, + .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), + .length = IXDP2351_BB_SIZE, + .type = MT_DEVICE + } +}; + +static void __init ixdp2351_map_io(void) +{ + ixp23xx_map_io(); + iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); +} + +static void __init ixdp2351_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 1, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixdp2351_map_io, + .init_irq = ixdp2351_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = ixdp2351_init, +MACHINE_END diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c new file mode 100644 index 000000000000..5330ad78c1bb --- /dev/null +++ b/arch/arm/mach-ixp23xx/pci.c @@ -0,0 +1,275 @@ +/* + * arch/arm/mach-ixp23xx/pci.c + * + * PCI routines for IXP23XX based systems + * + * Copyright (c) 2005 MontaVista Software, Inc. + * + * based on original code: + * + * Author: Naeem Afzal + * Copyright 2002-2005 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +extern int (*external_fault) (unsigned long, struct pt_regs *); + +static int pci_master_aborts = 0; + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +int clear_master_aborts(void); + +static u32 +*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) +{ + u32 *paddress; + + /* + * Must be dword aligned + */ + where &= ~3; + + /* + * For top bus, generate type 0, else type 1 + */ + if (!bus_nr) { + if (PCI_SLOT(devfn) >= 8) + return 0; + + paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT + | (1 << (PCI_SLOT(devfn) + 16)) + | (PCI_FUNC(devfn) << 8) | where); + } else { + paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT + | (bus_nr << 16) + | (PCI_SLOT(devfn) << 11) + | (PCI_FUNC(devfn) << 8) | where); + } + + return paddress; +} + +/* + * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. + * 0 and 3 are not valid indexes... + */ +static u32 bytemask[] = { + /*0*/ 0, + /*1*/ 0xff, + /*2*/ 0xffff, + /*3*/ 0, + /*4*/ 0xffffffff, +}; + +static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + u32 n; + u32 *addr; + + n = where % 4; + + DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + pci_master_aborts = 0; + *value = (*addr >> (8*n)) & bytemask[size]; + if (pci_master_aborts) { + pci_master_aborts = 0; + *value = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* + * We don't do error checking on the address for writes. + * It's assumed that the user checked for the device existing first + * by doing a read first. + */ +static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + u32 mask; + u32 *addr; + u32 temp; + + mask = ~(bytemask[size] << ((where % 0x4) * 8)); + addr = ixp23xx_pci_config_addr(bus->number, devfn, where); + if (!addr) + return PCIBIOS_DEVICE_NOT_FOUND; + temp = (u32) (value) << ((where % 0x4) * 8); + *addr = (*addr & mask) | temp; + + clear_master_aborts(); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops ixp23xx_pci_ops = { + .read = ixp23xx_pci_read_config, + .write = ixp23xx_pci_write_config, +}; + +struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) +{ + return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata); +} + +int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) +{ + volatile unsigned long temp; + unsigned long flags; + + pci_master_aborts = 1; + + local_irq_save(flags); + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + local_irq_restore(flags); + + /* + * If it was an imprecise abort, then we need to correct the + * return address to be _after_ the instruction. + */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; + + return 0; +} + +int clear_master_aborts(void) +{ + volatile u32 temp; + + temp = *IXP23XX_PCI_CONTROL; + + /* + * master abort and cmd tgt err + */ + if (temp & ((1 << 8) | (1 << 5))) + *IXP23XX_PCI_CONTROL = temp; + + temp = *IXP23XX_PCI_CMDSTAT; + + if (temp & (1 << 29)) + *IXP23XX_PCI_CMDSTAT = temp; + + return 0; +} + +void __init ixp23xx_pci_preinit(void) +{ +#ifdef __ARMEB__ + *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ +#endif + /* + * ADDR_31 needs to be clear for PCI memory access to CPP memory + */ + *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; + *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; + + /* + * Select correct memory for PCI inbound transactions + */ + if (ixp23xx_cpp_boot()) { + *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); + } else { + *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); + } + + hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, + "PCI config cycle to non-existent device"); + + *IXP23XX_PCI_ADDR_EXT = 0x0000e000; +} + +/* + * Prevent PCI layer from seeing the inbound host-bridge resources + */ +static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) +{ + int i; + + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + dev->resource[i].start = 0; + dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); + +/* + * IXP2300 systems often have large resource requirements, so we just + * use our own resource space. + */ +static struct resource ixp23xx_pci_mem_space = { + .start = IXP23XX_PCI_MEM_START, + .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + .name = "PCI Mem Space" +}; + +static struct resource ixp23xx_pci_io_space = { + .start = 0x00000100, + .end = 0x01ffffff, + .flags = IORESOURCE_IO, + .name = "PCI I/O Space" +}; + +int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) +{ + if (nr >= 1) + return 0; + + sys->resource[0] = &ixp23xx_pci_io_space; + sys->resource[1] = &ixp23xx_pci_mem_space; + sys->resource[2] = NULL; + + return 1; +} diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c new file mode 100644 index 000000000000..43c14e740794 --- /dev/null +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -0,0 +1,164 @@ +/* + * arch/arm/mach-ixp23xx/roadrunner.c + * + * RoadRunner board-specific routines + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * Interrupt mapping + */ +#define INTA IRQ_ROADRUNNER_PCI_INTA +#define INTB IRQ_ROADRUNNER_PCI_INTB +#define INTC IRQ_ROADRUNNER_PCI_INTC +#define INTD IRQ_ROADRUNNER_PCI_INTD + +#define INTC_PIN IXP23XX_GPIO_PIN_11 +#define INTD_PIN IXP23XX_GPIO_PIN_12 + +static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +{ + static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; + static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; + static int usb_irq[] = {INTB, INTC, INTD, -1}; + static int mini_pci_1_irq[] = {INTB, INTC, -1, -1}; + static int mini_pci_2_irq[] = {INTC, INTD, -1, -1}; + + switch(dev->bus->number) { + case 0: + switch(dev->devfn) { + case 0x0: // PCI-PCI bridge + break; + case 0x8: // PCI Card Slot + return pci_card_slot_irq[pin - 1]; + case 0x10: // PMC Slot + return pmc_card_slot_irq[pin - 1]; + case 0x18: // PMC Slot Secondary Agent + break; + case 0x20: // IXP Processor + break; + default: + return NO_IRQ; + } + break; + + case 1: + switch(dev->devfn) { + case 0x0: // IDE Controller + return (pin == 1) ? INTC : -1; + case 0x8: // USB fun 0 + case 0x9: // USB fun 1 + case 0xa: // USB fun 2 + return usb_irq[pin - 1]; + case 0x10: // Mini PCI 1 + return mini_pci_1_irq[pin-1]; + case 0x18: // Mini PCI 2 + return mini_pci_2_irq[pin-1]; + case 0x20: // MEM slot + return (pin == 1) ? INTA : -1; + default: + return NO_IRQ; + } + break; + + default: + return NO_IRQ; + } + + return NO_IRQ; +} + +static void roadrunner_pci_preinit(void) +{ + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + + ixp23xx_pci_preinit(); +} + +static struct hw_pci roadrunner_pci __initdata = { + .nr_controllers = 1, + .preinit = roadrunner_pci_preinit, + .setup = ixp23xx_pci_setup, + .scan = ixp23xx_pci_scan_bus, + .map_irq = roadrunner_map_irq, +}; + +static int __init roadrunner_pci_init(void) +{ + if (machine_is_roadrunner()) + pci_common_init(&roadrunner_pci); + + return 0; +}; + +subsys_initcall(roadrunner_pci_init); + +static void __init roadrunner_init(void) +{ + physmap_configure(0x90000000, 0x04000000, 2, NULL); + + /* + * Mark flash as writeable + */ + IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; + IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; + + ixp23xx_sys_init(); +} + +MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform") + /* Maintainer: Deepak Saxena */ + .phys_io = IXP23XX_PERIPHERAL_PHYS, + .io_pg_offst = ((IXP23XX_PERIPHERAL_VIRT >> 18)) & 0xfffc, + .map_io = ixp23xx_map_io, + .init_irq = ixp23xx_init_irq, + .timer = &ixp23xx_timer, + .boot_params = 0x00000100, + .init_machine = roadrunner_init, +MACHINE_END diff --git a/include/asm-arm/arch-ixp23xx/debug-macro.S b/include/asm-arm/arch-ixp23xx/debug-macro.S new file mode 100644 index 000000000000..eb99fd69fd24 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/debug-macro.S @@ -0,0 +1,23 @@ +/* + * include/asm-arm/arch-ixp23xx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ mmu enabled? + ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical + ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual + .endm + +#define UART_SHIFT 2 +#include diff --git a/include/asm-arm/arch-ixp23xx/dma.h b/include/asm-arm/arch-ixp23xx/dma.h new file mode 100644 index 000000000000..2f4335e3b836 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/dma.h @@ -0,0 +1,3 @@ +/* + * include/asm-arm/arch-ixp23xx/dma.h + */ diff --git a/include/asm-arm/arch-ixp23xx/entry-macro.S b/include/asm-arm/arch-ixp23xx/entry-macro.S new file mode 100644 index 000000000000..0ef4e6016ac4 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/entry-macro.S @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ixp23xx/entry-macro.S + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET) + ldr \irqnr, [\irqnr] @ get interrupt number + cmp \irqnr, #0x0 @ suprious interrupt ? + movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits + subne \irqnr, \irqnr, #1 @ convert to 0 based + +#if 0 + cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH + bne 1001f + mov \irqnr, #IRQ_IXP23XX_INTA + + ldr \irqnr, =0xf5000030 + + mov \tmp, #(1<<26) + tst \irqnr, \tmp + movne \irqnr, #IRQ_IXP23XX_INTB + + mov \tmp, #(1<<27) + tst \irqnr, \tmp + movne \irqnr, #IRQ_IXP23XX_INTA +1001: +#endif + .endm diff --git a/include/asm-arm/arch-ixp23xx/hardware.h b/include/asm-arm/arch-ixp23xx/hardware.h new file mode 100644 index 000000000000..c0010d21a684 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/hardware.h @@ -0,0 +1,37 @@ +/* + * include/asm-arm/arch-ixp23xx/hardware.h + * + * Copyright (C) 2002-2004 Intel Corporation. + * Copyricht (C) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Hardware definitions for IXP23XX based systems + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* PCI IO info */ +#define PCIO_BASE IXP23XX_PCI_IO_VIRT +#define PCIBIOS_MIN_IO 0x00000000 +#define PCIBIOS_MIN_MEM 0xe0000000 + +#include "ixp23xx.h" + +#define pcibios_assign_all_busses() 0 + +/* + * Platform helper functions + */ +#include "platform.h" + +/* + * Platform-specific headers + */ +#include "ixdp2351.h" + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/io.h b/include/asm-arm/arch-ixp23xx/io.h new file mode 100644 index 000000000000..18415a81ac74 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/io.h @@ -0,0 +1,54 @@ +/* + * include/asm-arm/arch-ixp23xx/io.h + * + * Original Author: Naeem M Afzal + * Maintainer: Deepak Saxena + * + * Copyright (C) 2003-2005 Intel Corp. + * Copyright (C) 2005 MontaVista Software, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT)) +#define __mem_pci(a) (a) + +#include /* For BUG */ + +static inline void __iomem * +ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned long flags) +{ + if (addr >= IXP23XX_PCI_MEM_START && + addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) { + if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) + return NULL; + + return (void __iomem *) + ((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT); + } + + return __ioremap(addr, size, flags); +} + +static inline void +ixp23xx_iounmap(void __iomem *addr) +{ + if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) && + (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE)) + return; + + __iounmap(addr); +} + +#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f) +#define __arch_iounmap(a) ixp23xx_iounmap(a) + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/irqs.h b/include/asm-arm/arch-ixp23xx/irqs.h new file mode 100644 index 000000000000..e69639585721 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/irqs.h @@ -0,0 +1,223 @@ +/* + * include/asm-arm/arch-ixp23xx/irqs.h + * + * IRQ definitions for IXP23XX based systems + * + * Author: Naeem Afzal + * + * Copyright (C) 2003-2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1 +#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS + + +#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */ +#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */ +#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */ +#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */ +#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */ +#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */ +#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */ +#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */ +#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */ +#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */ +#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */ +#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */ +#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */ +#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */ +#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */ +#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */ +#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */ +#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */ +#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */ +#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */ +#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */ +#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */ +#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */ +#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */ +#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */ +#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */ +#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */ +#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */ +#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */ +#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */ +#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */ +#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */ +#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */ +#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */ +#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */ +#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */ +#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */ +#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */ +#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */ +#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */ +#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */ +#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */ +#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */ +#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */ +#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */ +#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */ +#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */ +#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */ + +#define NUM_IXP23XX_RAW_IRQS 120 + +#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */ +#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */ + +#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1) + +/* + * We default to 32 per-board IRQs. Increase this number if you need + * more, but keep it realistic. + */ +#define NR_IXP23XX_MACH_IRQS 32 + +#define NR_IRQS NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS + +#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq)) + + +/* + * IXDP2351-specific interrupts + */ + +/* + * External PCI interrupts signaled through INTB + * + */ +#define IXDP2351_INTB_IRQ_BASE 0 +#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0) +#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1) +#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2) +#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3) +#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4) +#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5) +#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6) +#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7) +#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8) + +#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0)) +#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq)) +#define IXDP2351_INTB_IRQ_VALID 0x01FF +#define IXDP2351_INTB_IRQ_NUM 16 + +/* + * Other external interrupts signaled through INTA + */ +#define IXDP2351_INTA_IRQ_BASE 16 +#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16) +#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17) +#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18) +#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19) +#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20) +#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21) +#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24) +#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25) +#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26) +#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27) +#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28) +#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29) +#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30) +#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31) + +#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16)) +#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq)) +#define IXDP2351_INTA_IRQ_VALID 0xFF3F +#define IXDP2351_INTA_IRQ_NUM 16 + + +/* + * ADI RoadRunner IRQs + */ +#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA +#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB +#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11 +#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12 + +/* + * Put new board definitions here + */ + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/ixdp2351.h b/include/asm-arm/arch-ixp23xx/ixdp2351.h new file mode 100644 index 000000000000..4a24f8f15655 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/ixdp2351.h @@ -0,0 +1,89 @@ +/* + * include/asm-arm/arch-ixp23xx/ixdp2351.h + * + * Register and other defines for IXDP2351 + * + * Copyright (c) 2002-2004 Intel Corp. + * Copytight (c) 2005 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_IXDP2351_H +#define __ASM_ARCH_IXDP2351_H + +/* + * NP module memory map + */ +#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE) +#define IXDP2351_NP_PHYS_SIZE 0x00100000 +#define IXDP2351_NP_VIRT_BASE 0xeff00000 + +#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE) +#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16) + +#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000) + +#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg)) + +#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00) +#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02) +#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04) + +/* + * Base board module memory map + */ + +#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE) +#define IXDP2351_BB_SIZE 0x01000000 +#define IXDP2351_BB_BASE_VIRT (0xee000000) + +#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset) + +#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0) +#define IXDP2351_NVRAM_SIZE (0x20000) + +#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP3251_BB_AREA_BASE(0x00020000) +#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0) +#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000) +#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000) +#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000) +#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000) + +/* + * On board CPLD registers + */ +#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg)) + +#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00) +#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04) + +#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA +#define IXDP2351_CPLD_RESET1_ENABLE 0x8000 + +#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08) +#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10) +#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14) +#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18) +#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C) +#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */ +#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */ +#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */ +#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */ +#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28) +#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C) + /* Interrupt bits are defined in irqs.h */ +#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30) +#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34) + +/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */ +/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */ +/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */ +/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */ +/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */ + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/ixp23xx.h b/include/asm-arm/arch-ixp23xx/ixp23xx.h new file mode 100644 index 000000000000..e49e1ca61b1a --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/ixp23xx.h @@ -0,0 +1,306 @@ +/* + * include/asm-arm/arch-ixp23xx/ixp23xx.h + * + * Register definitions for IXP23XX + * + * Copyright (C) 2003-2005 Intel Corporation. + * Copyright (C) 2005 MontaVista Software, Inc. + * + * Maintainer: Deepak Saxena + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IXP23XX_H +#define __ASM_ARCH_IXP23XX_H + +/* + * IXP2300 linux memory map: + * + * virt phys size + * fffd0000 a0000000 64K XSI2CPP_CSR + * fffc0000 c4000000 4K EXP_CFG + * fff00000 c8000000 64K PERIPHERAL + * fe000000 1c0000000 16M CAP_CSR + * fd000000 1c8000000 16M MSF_CSR + * fb000000 16M --- + * fa000000 1d8000000 32M PCI_IO + * f8000000 1da000000 32M PCI_CFG + * f6000000 1de000000 32M PCI_CREG + * f4000000 32M --- + * f0000000 1e0000000 64M PCI_MEM + * e[c-f]000000 per-platform mappings + */ + + +/**************************************************************************** + * Static mappings. + ****************************************************************************/ +#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000 +#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000 +#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000 + +#define IXP23XX_EXP_CFG_PHYS 0xc4000000 +#define IXP23XX_EXP_CFG_VIRT 0xfffc0000 +#define IXP23XX_EXP_CFG_SIZE 0x00001000 + +#define IXP23XX_PERIPHERAL_PHYS 0xc8000000 +#define IXP23XX_PERIPHERAL_VIRT 0xfff00000 +#define IXP23XX_PERIPHERAL_SIZE 0x00010000 + +#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL +#define IXP23XX_CAP_CSR_VIRT 0xfe000000 +#define IXP23XX_CAP_CSR_SIZE 0x01000000 + +#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL +#define IXP23XX_MSF_CSR_VIRT 0xfd000000 +#define IXP23XX_MSF_CSR_SIZE 0x01000000 + +#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL +#define IXP23XX_PCI_IO_VIRT 0xfa000000 +#define IXP23XX_PCI_IO_SIZE 0x02000000 + +#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL +#define IXP23XX_PCI_CFG_VIRT 0xf8000000 +#define IXP23XX_PCI_CFG_SIZE 0x02000000 +#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT +#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000) + +#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL +#define IXP23XX_PCI_CREG_VIRT 0xf6000000 +#define IXP23XX_PCI_CREG_SIZE 0x02000000 +#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000) + +#define IXP23XX_PCI_MEM_START 0xe0000000 +#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL +#define IXP23XX_PCI_MEM_VIRT 0xf0000000 +#define IXP23XX_PCI_MEM_SIZE 0x04000000 + + +/**************************************************************************** + * XSI2CPP CSRs. + ****************************************************************************/ +#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x))) +#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8) +#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19) +#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20) +#define IXP23XX_CPP2XSI_COH_OFF (1 << 21) + + +/**************************************************************************** + * Expansion Bus Config. + ****************************************************************************/ +#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x))) +#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00) +#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04) +#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08) +#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c) +#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10) +#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14) +#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18) +#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c) +#define IXP23XX_FLASH_WRITABLE (0x2) +#define IXP23XX_FLASH_BUS8 (0x1) + +#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20) +#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24) +#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31) +#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22) +#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21) +#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19) +#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18) +#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16) +#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14) +#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13) +#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12) +#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5) +#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4) +#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3) +#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2) +#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1) +#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0) + +#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28) +#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30) + +#define IXP23XX_EXP_BUS_PHYS 0x90000000 +#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000 + +#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000) +#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000) +#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000) +#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000) +#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000) +#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000) +#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000) +#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000) + + +/**************************************************************************** + * Peripherals. + ****************************************************************************/ +#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000) +#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000) +#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000) +#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000) +#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000) +#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000) +#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000) +#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000) +#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000) +#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000) +#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000) +#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000) +#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000) +#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000) + +#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000) +#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000) +#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000) +#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000) +#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000) +#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000) +#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000) +#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000) +#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000) +#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000) +#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000) +#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000) +#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000) +#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000) + + +/**************************************************************************** + * Interrupt controller. + ****************************************************************************/ +#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x))) +#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00) +#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04) +#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08) +#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c) +#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10) +#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14) +#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18) +#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c) +#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20) +#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24) +#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28) +#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c) +#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30) +#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34) +#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38) +#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c) +#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54 + + +/**************************************************************************** + * GPIO. + ****************************************************************************/ +#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x))) +#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00) +#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04) +#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08) +#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c) +#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10) +#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14) +#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18) +#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c) + +#define IXP23XX_GPIO_STYLE_MASK 0x7 +#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0 +#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1 +#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2 +#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3 +#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4 + +#define IXP23XX_GPIO_STYLE_SIZE 3 + + +/**************************************************************************** + * Timer. + ****************************************************************************/ +#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x))) +#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00) +#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04) +#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08) +#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c) +#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10) +#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14) +#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18) +#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c) +#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e +#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20) +#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24) +#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28) + +#define IXP23XX_TIMER_ENABLE (1 << 0) +#define IXP23XX_TIMER_ONE_SHOT (1 << 1) +/* Low order bits of reload value ignored */ +#define IXP23XX_TIMER_RELOAD_MASK (0x3) +#define IXP23XX_TIMER_DISABLED (0x0) +#define IXP23XX_TIMER1_INT_PEND (1 << 0) +#define IXP23XX_TIMER2_INT_PEND (1 << 1) +#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2) +#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3) +#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4) + + +/**************************************************************************** + * CAP CSRs. + ****************************************************************************/ +#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x))) +#define IXP23XX_PROD_IDG IXP23XX_GLOBAL_REG(0x00) +#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04) +#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08) +#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c) +#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10) +#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18) + +#define IXP23XX_ENABLE_WATCHDOG (1 << 24) +#define IXP23XX_SHPC_INIT_COMP (1 << 21) +#define IXP23XX_RST_ALL (1 << 16) +#define IXP23XX_RESET_PCI (1 << 2) +#define IXP23XX_PCI_UNIT_RESET (1 << 1) +#define IXP23XX_XSCALE_RESET (1 << 0) + + +/**************************************************************************** + * PCI CSRs. + ****************************************************************************/ +#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x))) +#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04) +#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14) +#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18) + + +#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x))) +#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030) +#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034) +#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc) +#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100) +#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c) +#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140) +#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148) +#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c) +#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150) +#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150) +#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154) +#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158) +#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c) +#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160) + + +#ifndef __ASSEMBLY__ +/* + * Is system memory on the XSI or CPP bus? + */ +static inline unsigned ixp23xx_cpp_boot(void) +{ + return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES); +} +#endif + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h new file mode 100644 index 000000000000..bebcf0aa0d72 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -0,0 +1,46 @@ +/* + * include/asm-arm/arch-ixp23xx/memory.h + * + * Copyright (c) 2003-2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET (0x00000000) + + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#ifndef __ASSEMBLY__ + +#define __virt_to_bus(v) \ + ({ unsigned int ret; \ + ret = ((__virt_to_phys(v) - 0x00000000) + \ + (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ + ret; }) + +#define __bus_to_virt(b) \ + ({ unsigned int data; \ + data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ + __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) + +#endif + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/platform.h b/include/asm-arm/arch-ixp23xx/platform.h new file mode 100644 index 000000000000..f85b4685a491 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/platform.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ixp23xx/platform.h + * + * Various bits of code used by platform-level code. + * + * Author: Deepak Saxena + * + * Copyright 2005 (c) MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASSEMBLY__ + +struct pci_sys_data; + +void ixp23xx_map_io(void); +void ixp23xx_init_irq(void); +void ixp23xx_sys_init(void); +int ixp23xx_pci_setup(int, struct pci_sys_data *); +void ixp23xx_pci_preinit(void); +struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*); + +extern struct sys_timer ixp23xx_timer; + +#define IXP23XX_UART_XTAL 14745600 + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/system.h b/include/asm-arm/arch-ixp23xx/system.h new file mode 100644 index 000000000000..925e6b0c338b --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/system.h @@ -0,0 +1,33 @@ +/* + * include/asm-arm/arch-ixp23xx/system.h + * + * Copyright (C) 2003 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +static inline void arch_idle(void) +{ +#if 0 + if (!hlt_counter) + cpu_do_idle(); +#endif +} + +static inline void arch_reset(char mode) +{ + /* First try machine specific support */ + if (machine_is_ixdp2351()) { + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; + (void) *IXDP2351_CPLD_RESET1_REG; + *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; + } + + /* Use on-chip reset capability */ + *IXP23XX_RESET0 |= IXP23XX_RST_ALL; +} diff --git a/include/asm-arm/arch-ixp23xx/time.h b/include/asm-arm/arch-ixp23xx/time.h new file mode 100644 index 000000000000..f6828fdd2883 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/time.h @@ -0,0 +1,3 @@ +/* + * include/asm-arm/arch-ixp23xx/time.h + */ diff --git a/include/asm-arm/arch-ixp23xx/timex.h b/include/asm-arm/arch-ixp23xx/timex.h new file mode 100644 index 000000000000..516f72fe6082 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/timex.h @@ -0,0 +1,7 @@ +/* + * include/asm-arm/arch-ixp23xx/timex.h + * + * XScale architecture timex specifications + */ + +#define CLOCK_TICK_RATE 75000000 diff --git a/include/asm-arm/arch-ixp23xx/uncompress.h b/include/asm-arm/arch-ixp23xx/uncompress.h new file mode 100644 index 000000000000..62623fa9b2f7 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/uncompress.h @@ -0,0 +1,45 @@ +/* + * include/asm-arm/arch-ixp23xx/uncompress.h + * + * Copyright (C) 2002-2004 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include +#include + +#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS) + +static __inline__ void putc(char c) +{ + int j; + + for (j = 0; j < 0x1000; j++) { + if (UART_BASE[UART_LSR] & UART_LSR_THRE) + break; + } + + UART_BASE[UART_TX] = c; +} + +static void putstr(const char *s) +{ + while (*s) { + putc(*s); + if (*s == '\n') + putc('\r'); + s++; + } +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + + +#endif diff --git a/include/asm-arm/arch-ixp23xx/vmalloc.h b/include/asm-arm/arch-ixp23xx/vmalloc.h new file mode 100644 index 000000000000..9f2566658541 --- /dev/null +++ b/include/asm-arm/arch-ixp23xx/vmalloc.h @@ -0,0 +1,10 @@ +/* + * include/asm-arm/arch-ixp23xx/vmalloc.h + * + * Copyright (c) 2005 MontaVista Software, Inc. + * + * NPU mappings end at 0xf0000000 and we allocate 64MB for board + * specific static I/O. + */ + +#define VMALLOC_END (0xec000000)