drm/i915: fixup interlaced vertical timings confusion, part 1

We have a pretty decent confusion about vertical timings of interlaced
modes. Peter Ross has written a patch that makes interlace modes work
on a lot more platforms/output combinations by doubling the vertical
timings.

The issue with that patch is that core drm _does_ support specifying
whether we want these vertical timings in fields or frames, we just
haven't managed to consistently use this facility. The relavant
function is drm_mode_set_crtcinfo, which fills in the crtc timing
information.

The first thing to note is that the drm core keeps interlaced modes in
frames, but displays modelines in fields. So when the crtc modeset
helper copies over the mode into adjusted_mode it will already contain
vertical timings in half-frames. The result is that the fixup code in
intel_crtc_mode_fixup doesn't actually do anything (in most cases at
least).

Now gen3+ natively supports interlaced modes and wants the vertical
timings in frames. Which is what sdvo already fixes up, at least under
some conditions.

There are a few other place that demand vertical timings in fields
but never actually deal with interlaced modes, so use frame timings
for consistency, too. These are:
- lvds panel,
- dvo encoders - dvo is the only way gen2 could support interlaced
  mode, but currently we don't support any encoders that do.
- tv out - despite that the tv dac sends out an interlaced signal it
  expects a progressive mode pipe configuration.
All these encoders enforce progressive modes by resetting
interlace_allowed.

Hence we always want crtc vertical timings in frames. Enforce this in
our crtc mode_fixup function and rip out any redudant timing
computations from the encoders' mode_fixup function.

v2-4: Adjust the vertical timings a bit.

v5: Split out the 'subtract-one for interlaced' fixes.

v6: Clarify issues around tv-out and gen2.

Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Christopher Egert <cme3000@gmail.com>
Tested-by: Alfonso Fiore <alfonso.fiore@gmail.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This commit is contained in:
Daniel Vetter 2012-01-28 14:49:20 +01:00
Родитель d442ae181b
Коммит ca9bfa7eed
6 изменённых файлов: 5 добавлений и 10 удалений

Просмотреть файл

@ -3437,11 +3437,8 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
return false;
}
/* XXX some encoders set the crtcinfo, others don't.
* Obviously we need some form of conflict resolution here...
*/
if (adjusted_mode->crtc_htotal == 0)
drm_mode_set_crtcinfo(adjusted_mode, 0);
/* All interlaced capable intel hw wants timings in frames. */
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}

Просмотреть файл

@ -157,7 +157,6 @@ static bool intel_dvo_mode_fixup(struct drm_encoder *encoder,
C(vsync_end);
C(vtotal);
C(clock);
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
#undef C
}

Просмотреть файл

@ -264,7 +264,7 @@ i830_activate_pipe_a(struct drm_device *dev)
DRM_DEBUG_DRIVER("Enabling pipe A in order to enable overlay\n");
mode = drm_mode_duplicate(dev, &vesa_640x480);
drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
drm_mode_set_crtcinfo(mode, 0);
if (!drm_crtc_helper_set_mode(&crtc->base, mode,
crtc->base.x, crtc->base.y,
crtc->base.fb))

Просмотреть файл

@ -48,7 +48,7 @@ intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
adjusted_mode->clock = fixed_mode->clock;
drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
drm_mode_set_crtcinfo(adjusted_mode, 0);
}
/* adjusted_mode has been preset to be the panel's fixed mode */

Просмотреть файл

@ -944,7 +944,6 @@ intel_sdvo_set_input_timings_for_mode(struct intel_sdvo *intel_sdvo,
intel_sdvo_get_mode_from_dtd(adjusted_mode, &intel_sdvo->input_dtd);
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
}

Просмотреть файл

@ -1240,7 +1240,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
int type;
mode = reported_modes[0];
drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V);
drm_mode_set_crtcinfo(&mode, 0);
if (intel_tv->base.base.crtc && intel_tv->base.base.crtc->enabled) {
type = intel_tv_detect_type(intel_tv, connector);