DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
 choice and optimizes the DMA ISR by removing unnecessary register reads.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJPqq+jAAoJEGFBu2jqvgRNs1MP/R1z0/h7nrN26aspSS9kxIJr
 M8HpG+qSmfLg+h6RSpQYY8SoMJ5mN7vA1AJQr9M2zUZXDYMy+AXYXdlJ2Q9p5ene
 A3Iz4yTfHgosrj9fd6fY7vH/Bd9v2T7H366SKPdk0gsSufzkSzEHvVkIROGLIQF2
 2kKgBdp94Vdgi+9nimePePIE5EyLxsMW3BNcFLVNkcdfZTFGlbtSav5zT4OCJoIm
 d/WI1Xh34nvzkHZptLqUwPF0u62YTcGY+Z6n6KhYk6mSJ2JHWfycwGOf7V9CFVkZ
 k7wdSaGfZbPrGQbKjK66Oahq+RN5kIklVB/GIyF5ZectxX+E+Mr8XLO8wKtCMxnf
 SvB9jy/LBIqPQlzodEy2FWryzh5gRB/KnDC3sYonpm81scYLEr9T1sw1k4yzR0cS
 ZgV2WfaqgfY9HoHzhoxwNB7hCo7VVHGL3r6BsB/30NUk8rnN/SGcDHdu5cTPT7gW
 qFfz4uGRC40kvUm2gq3yJh95r3iAnKmawFGjqhBSSMjHcPEVhEgsa913uSclR99w
 uKDWqsbhJN7h+W3nLPU7H4qq1PA+d3UGm7eWI8FBXxwf7qng00XJINBAssfxVRvJ
 xR0jC7/VeVypcvICPiKdDt2wxl80ptTF80461P0ieXKZsu/PXltLJXd+m7U/gq1u
 mhkE90gNGeSH7EsKC2A2
 =/we3
 -----END PGP SIGNATURE-----

Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into next/drivers

DaVinci SoC updates for v3.5

This pull request updates the DaVinci SoC support to implement DEBUG_LL port
choice and optimizes the DMA ISR by removing unnecessary register reads.

* tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci:
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  + sync with Linux 3.4-rc6

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -1,10 +1,10 @@
-* Calxeda SATA Controller
+* AHCI SATA Controller
 
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci"
+- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
@@ -14,4 +14,3 @@ Example:
                 reg = <0xffe08000 0x1000>;
                 interrupts = <115>;
         };
-

Documentation/devicetree/bindings/sound/sgtl5000.txt

@@ -3,6 +3,8 @@
 Required properties:
 - compatible : "fsl,sgtl5000".
 
+- reg : the I2C address of the device
+
 Example:
 
 codec: sgtl5000@0a {

Documentation/networking/ip-sysctl.txt

@@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
 	Possible values are [-31, 31], inclusive.
-	Default: 2
+	Default: 1
 
 tcp_allowed_congestion_control - STRING
 	Show/set the congestion control choices available to non-privileged
@@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
 	net.core.rmem_max.  Calling setsockopt() with SO_RCVBUF disables
 	automatic tuning of that socket's receive buffer size, in which
 	case this value is ignored.
-	Default: between 87380B and 4MB, depending on RAM size.
+	Default: between 87380B and 6MB, depending on RAM size.
 
 tcp_sack - BOOLEAN
 	Enable select acknowledgments (SACKS).

Documentation/power/freezing-of-tasks.txt

@@ -9,7 +9,7 @@ architectures).
 
 II. How does it work?
 
-There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE
+There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN
 and PF_FREEZER_SKIP (the last one is auxiliary).  The tasks that have
 PF_NOFREEZE unset (all user space processes and some kernel threads) are
 regarded as 'freezable' and treated in a special way before the system enters a
@@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows
 we only consider hibernation, but the description also applies to suspend).
 
 Namely, as the first step of the hibernation procedure the function
-freeze_processes() (defined in kernel/power/process.c) is called.  It executes
-try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and
-either wakes them up, if they are kernel threads, or sends fake signals to them,
-if they are user space processes.  A task that has TIF_FREEZE set, should react
-to it by calling the function called __refrigerator() (defined in
-kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state
-to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it.
-Then, we say that the task is 'frozen' and therefore the set of functions
-handling this mechanism is referred to as 'the freezer' (these functions are
-defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h).
-User space processes are generally frozen before kernel threads.
+freeze_processes() (defined in kernel/power/process.c) is called.  A system-wide
+variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate
+whether the system is to undergo a freezing operation. And freeze_processes()
+sets this variable.  After this, it executes try_to_freeze_tasks() that sends a
+fake signal to all user space processes, and wakes up all the kernel threads.
+All freezable tasks must react to that by calling try_to_freeze(), which
+results in a call to __refrigerator() (defined in kernel/freezer.c), which sets
+the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes
+it loop until PF_FROZEN is cleared for it. Then, we say that the task is
+'frozen' and therefore the set of functions handling this mechanism is referred
+to as 'the freezer' (these functions are defined in kernel/power/process.c,
+kernel/freezer.c & include/linux/freezer.h). User space processes are generally
+frozen before kernel threads.
 
 __refrigerator() must not be called directly.  Instead, use the
 try_to_freeze() function (defined in include/linux/freezer.h), that checks
-the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the
-flag is set.
+if the task is to be frozen and makes the task enter __refrigerator().
 
 For user space processes try_to_freeze() is called automatically from the
 signal-handling code, but the freezable kernel threads need to call it
 explicitly in suitable places or use the wait_event_freezable() or
 wait_event_freezable_timeout() macros (defined in include/linux/freezer.h)
-that combine interruptible sleep with checking if TIF_FREEZE is set and calling
-try_to_freeze().  The main loop of a freezable kernel thread may look like the
-following one:
+that combine interruptible sleep with checking if the task is to be frozen and
+calling try_to_freeze().  The main loop of a freezable kernel thread may look
+like the following one:
 
 	set_freezable();
 	do {
@@ -53,7 +54,7 @@ following one:
 (from drivers/usb/core/hub.c::hub_thread()).
 
 If a freezable kernel thread fails to call try_to_freeze() after the freezer has
-set TIF_FREEZE for it, the freezing of tasks will fail and the entire
+initiated a freezing operation, the freezing of tasks will fail and the entire
 hibernation operation will be cancelled.  For this reason, freezable kernel
 threads must call try_to_freeze() somewhere or use one of the
 wait_event_freezable() and wait_event_freezable_timeout() macros.

Documentation/security/keys.txt

@@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW
 
 The key service provides a number of features besides keys:
 
- (*) The key service defines two special key types:
+ (*) The key service defines three special key types:
 
      (+) "keyring"
 
@@ -137,6 +137,18 @@ The key service provides a number of features besides keys:
 	 blobs of data. These can be created, updated and read by userspace,
 	 and aren't intended for use by kernel services.
 
+     (+) "logon"
+
+	 Like a "user" key, a "logon" key has a payload that is an arbitrary
+	 blob of data. It is intended as a place to store secrets which are
+	 accessible to the kernel but not to userspace programs.
+
+	 The description can be arbitrary, but must be prefixed with a non-zero
+	 length string that describes the key "subclass". The subclass is
+	 separated from the rest of the description by a ':'. "logon" keys can
+	 be created and updated from userspace, but the payload is only
+	 readable from kernel space.
+
  (*) Each process subscribes to three keyrings: a thread-specific keyring, a
      process-specific keyring, and a session-specific keyring.
 

MAINTAINERS

@@ -1968,10 +1968,7 @@ S:	Maintained
 F:	drivers/net/ethernet/ti/cpmac.c
 
 CPU FREQUENCY DRIVERS
-M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
-W:	http://www.codemonkey.org.uk/projects/cpufreq/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
 S:	Maintained
 F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
@@ -3592,6 +3589,7 @@ S:	Supported
 F:	drivers/net/wireless/iwlegacy/
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
+M:	Johannes Berg <johannes.berg@intel.com>
 M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
@@ -5891,11 +5889,11 @@ F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Vlad Yasevich <vyasevich@gmail.com>
 M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
-S:	Supported
+S:	Maintained
 F:	Documentation/networking/sctp.txt
 F:	include/linux/sctp.h
 F:	include/net/sctp/
@@ -7578,8 +7576,8 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX AXI ETHERNET DRIVER
-M:	Ariane Keller <ariane.keller@tik.ee.ethz.ch>
-M:	Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch>
+M:	Anirudha Sarangi <anirudh@xilinx.com>
+M:	John Linn <John.Linn@xilinx.com>
 S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -477,7 +477,7 @@ config ALPHA_BROKEN_IRQ_MASK
 
 config VGA_HOSE
 	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI
+	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
 	default y
 	help
 	  Support VGA on an arbitrary hose; needed for several platforms

arch/alpha/include/asm/rtc.h

@@ -1,14 +1,10 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-#if defined(CONFIG_ALPHA_GENERIC)
+#if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP) \
+ || defined(CONFIG_ALPHA_GENERIC)
 # define get_rtc_time		alpha_mv.rtc_get_time
 # define set_rtc_time		alpha_mv.rtc_set_time
-#else
-# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
-#  define get_rtc_time		marvel_get_rtc_time
-#  define set_rtc_time		marvel_set_rtc_time
-# endif
 #endif
 
 #include <asm-generic/rtc.h>

arch/alpha/kernel/core_tsunami.c

@@ -11,6 +11,7 @@
 #include <asm/core_tsunami.h>
 #undef __EXTERN_INLINE
 
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/sched.h>

arch/alpha/kernel/sys_marvel.c

@@ -317,7 +317,7 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;

arch/arm/Kconfig

@@ -1186,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K

arch/arm/Kconfig.debug

@@ -103,6 +103,35 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DAVINCI_DA8XX_UART1
+		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+		depends on ARCH_DAVINCI_DA8XX
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 serial port on DaVinci DA8XX devices.
+
+	config DEBUG_DAVINCI_DA8XX_UART2
+		bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+		depends on ARCH_DAVINCI_DA8XX
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART2 serial port on DaVinci DA8XX devices.
+
+	config DEBUG_DAVINCI_DMx_UART0
+		bool "Kernel low-level debugging on DaVinci DMx using UART0"
+		depends on ARCH_DAVINCI_DMx
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 serial port on DaVinci DMx devices.
+
+	config DEBUG_DAVINCI_TNETV107X_UART1
+		bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
+		depends on ARCH_DAVINCI_TNETV107X
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 serial port on DaVinci TNETV107X
+		  devices.
+
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE

arch/arm/boot/dts/msm8660-surf.dts

@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };

arch/arm/boot/dts/versatile-ab.dts

@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};

arch/arm/configs/mini2440_defconfig

@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y

arch/arm/include/asm/thread_info.h

@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*

arch/arm/include/asm/tls.h

@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 

arch/arm/kernel/irq.c

@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }

arch/arm/kernel/signal.c

@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
+	if (err)
+		return -EFAULT;
 
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif

arch/arm/kernel/smp.c

@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/kernel/smp_twd.c

@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
-	 *
-	 * Only wait for it to finish, if the cpu is active to avoid
-	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
-	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-					 NULL, cpu_active(freqs->cpu));
+			NULL, 1);
 
 	return NOTIFY_OK;
 }

arch/arm/mach-davinci/dma.c

@@ -353,9 +353,10 @@ static int irq2ctlr(int irq)
  *****************************************************************************/
 static irqreturn_t dma_irq_handler(int irq, void *data)
 {
-	int i;
 	int ctlr;
-	unsigned int cnt = 0;
+	u32 sh_ier;
+	u32 sh_ipr;
+	u32 bank;
 
 	ctlr = irq2ctlr(irq);
 	if (ctlr < 0)
@@ -363,41 +364,39 @@ static irqreturn_t dma_irq_handler(int irq, void *data)
 
 	dev_dbg(data, "dma_irq_handler\n");
 
-	if ((edma_shadow0_read_array(ctlr, SH_IPR, 0) == 0) &&
-	    (edma_shadow0_read_array(ctlr, SH_IPR, 1) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j;
-		if (edma_shadow0_read_array(ctlr, SH_IPR, 0) &
-				edma_shadow0_read_array(ctlr, SH_IER, 0))
-			j = 0;
-		else if (edma_shadow0_read_array(ctlr, SH_IPR, 1) &
-				edma_shadow0_read_array(ctlr, SH_IER, 1))
-			j = 1;
-		else
-			break;
-		dev_dbg(data, "IPR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_IPR, j));
-		for (i = 0; i < 32; i++) {
-			int k = (j << 5) + i;
-			if ((edma_shadow0_read_array(ctlr, SH_IPR, j) & BIT(i))
-					&& (edma_shadow0_read_array(ctlr,
-							SH_IER, j) & BIT(i))) {
-				/* Clear the corresponding IPR bits */
-				edma_shadow0_write_array(ctlr, SH_ICR, j,
-							BIT(i));
-				if (edma_cc[ctlr]->intr_data[k].callback)
-					edma_cc[ctlr]->intr_data[k].callback(
-						k, DMA_COMPLETE,
-						edma_cc[ctlr]->intr_data[k].
-						data);
-			}
-		}
-		cnt++;
-		if (cnt > 10)
-			break;
+	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
+	if (!sh_ipr) {
+		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
+		if (!sh_ipr)
+			return IRQ_NONE;
+		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
+		bank = 1;
+	} else {
+		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
+		bank = 0;
 	}
+
+	do {
+		u32 slot;
+		u32 channel;
+
+		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
+
+		slot = __ffs(sh_ipr);
+		sh_ipr &= ~(BIT(slot));
+
+		if (sh_ier & BIT(slot)) {
+			channel = (bank << 5) | slot;
+			/* Clear the corresponding IPR bits */
+			edma_shadow0_write_array(ctlr, SH_ICR, bank,
+					BIT(slot));
+			if (edma_cc[ctlr]->intr_data[channel].callback)
+				edma_cc[ctlr]->intr_data[channel].callback(
+					channel, DMA_COMPLETE,
+					edma_cc[ctlr]->intr_data[channel].data);
+		}
+	} while (sh_ipr);
+
 	edma_shadow0_write(ctlr, SH_IEVAL, 1);
 	return IRQ_HANDLED;
 }

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -22,46 +22,28 @@
 
 #define UART_SHIFT	2
 
-		.pushsection .data
-davinci_uart_phys:	.word	0
-davinci_uart_virt:	.word	0
-		.popsection
+#if defined(CONFIG_DEBUG_DAVINCI_DMx_UART0)
+#define UART_BASE	DAVINCI_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART0)
+#define UART_BASE	DA8XX_UART0_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART1)
+#define UART_BASE	DA8XX_UART1_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_DA8XX_UART2)
+#define UART_BASE	DA8XX_UART2_BASE
+#elif defined(CONFIG_DEBUG_DAVINCI_TNETV107X_UART1)
+#define UART_BASE	TNETV107X_UART2_BASE
+#define UART_VIRTBASE	TNETV107X_UART2_VIRT
+#else
+#error "Select a specifc port for DEBUG_LL"
+#endif
+
+#ifndef UART_VIRTBASE
+#define UART_VIRTBASE	IO_ADDRESS(UART_BASE)
+#endif
 
 		.macro addruart, rp, rv, tmp
-
-		/* Use davinci_uart_phys/virt if already configured */
-10:		adr	\rp, 99f		@ get effective addr of 99f
-		ldr	\rv, [\rp]		@ get absolute addr of 99f
-		sub	\rv, \rv, \rp		@ offset between the two
-		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
-		sub	\tmp, \rp, \rv		@ make it effective
-		ldr	\rp, [\tmp, #0]		@ davinci_uart_phys
-		ldr	\rv, [\tmp, #4]		@ davinci_uart_virt
-		cmp	\rp, #0			@ is port configured?
-		cmpne	\rv, #0
-		bne	100f			@ already configured
-
-		/* Check the debug UART address set in uncompress.h */
-		and	\rp, pc, #0xff000000
-		ldr	\rv, =DAVINCI_UART_INFO_OFS
-		add	\rp, \rp, \rv
-
-		/* Copy uart phys address from decompressor uart info */
-		ldr	\rv, [\rp, #0]
-		str	\rv, [\tmp, #0]
-
-		/* Copy uart virt address from decompressor uart info */
-		ldr	\rv, [\rp, #4]
-		str	\rv, [\tmp, #4]
-
-		b	10b
-
-		.align
-99:		.word	.
-		.word	davinci_uart_phys
-		.ltorg
-
-100:
+		ldr	\rp, =UART_BASE
+		ldr	\rv, =UART_VIRTBASE
 		.endm
 
 		.macro	senduart,rd,rx

arch/arm/mach-davinci/include/mach/hardware.h

@@ -22,7 +22,7 @@
 /*
  * I/O mapping
  */
-#define IO_PHYS				0x01c00000UL
+#define IO_PHYS				UL(0x01c00000)
 #define IO_OFFSET			0xfd000000 /* Virtual IO = 0xfec00000 */
 #define IO_SIZE				0x00400000
 #define IO_VIRT				(IO_PHYS + IO_OFFSET)

arch/arm/mach-davinci/include/mach/serial.h

@@ -15,16 +15,6 @@
 
 #include <mach/hardware.h>
 
-/*
- * Stolen area that contains debug uart physical and virtual addresses.  These
- * addresses are filled in by the uncompress.h code, and are used by the debug
- * macros in debug-macro.S.
- *
- * This area sits just below the page tables (see arch/arm/kernel/head.S).
- * We define it as a relative offset from start of usable RAM.
- */
-#define DAVINCI_UART_INFO_OFS	0x3ff8
-
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)
 #define DAVINCI_UART2_BASE	(IO_PHYS + 0x20800)

arch/arm/mach-davinci/include/mach/uncompress.h

@@ -43,37 +43,27 @@ static inline void flush(void)
 		barrier();
 }
 
-static inline void set_uart_info(u32 phys, void * __iomem virt)
+static inline void set_uart_info(u32 phys)
 {
-	/*
-	 * Get address of some.bss variable and round it down
-	 * a la CONFIG_AUTO_ZRELADDR.
-	 */
-	u32 ram_start = (u32)&uart & 0xf8000000;
-	u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
-
 	uart = (u32 *)phys;
-	uart_info[0] = phys;
-	uart_info[1] = (u32)virt;
 }
 
-#define _DEBUG_LL_ENTRY(machine, phys, virt)			\
-	if (machine_is_##machine()) {				\
-		set_uart_info(phys, virt);			\
-		break;						\
+#define _DEBUG_LL_ENTRY(machine, phys)				\
+	{							\
+		if (machine_is_##machine()) {			\
+			set_uart_info(phys);			\
+			break;					\
+		}						\
 	}
 
 #define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE,	\
-			IO_ADDRESS(DAVINCI_UART##port##_BASE))
+	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
 
 #define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE,	\
-			IO_ADDRESS(DA8XX_UART##port##_BASE))
+	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
 
 #define DEBUG_LL_TNETV107X(machine, port)			\
-	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE,	\
-			TNETV107X_UART##port##_VIRT)
+	_DEBUG_LL_ENTRY(machine, TNETV107X_UART##port##_BASE)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {

arch/arm/mach-exynos/clock-exynos4.c

@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),

arch/arm/mach-exynos/clock-exynos5.c

@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),

arch/arm/mach-exynos/common.c

@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),

arch/arm/mach-exynos/dev-dwmci.c

@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {

arch/arm/mach-exynos/mach-nuri.c

@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };

arch/arm/mach-exynos/mach-universal_c210.c

@@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };

arch/arm/mach-msm/board-msm8x60.c

@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();

arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h

@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
 	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
+	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}

arch/arm/mach-pxa/pxa27x.c

@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 

arch/arm/mach-s3c24xx/Kconfig

@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help

arch/arm/mach-s5pv210/mach-goni.c

@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 

arch/arm/mach-sa1100/generic.c

@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };

arch/arm/mach-u300/core.c

@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 

arch/arm/mach-u300/i2c.c

@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},

arch/arm/mach-u300/include/mach/irqs.h

@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif

arch/arm/mach-ux500/mbox-db5500.c

@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {

arch/arm/mm/abort-ev6.S

@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
-	tst	r5, #PSR_J_BIT			@ Java?
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
+	bne	do_DataAbort
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort

arch/arm/mm/cache-l2x0.c

@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",

arch/arm/mm/init.c

@@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 

arch/arm/mm/mmu.c

@@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;

arch/arm/plat-omap/dma.c

@@ -916,6 +916,13 @@ void omap_start_dma(int lch)
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,6 +972,13 @@ void omap_stop_dma(int lch)
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[dma_lch_count];

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { }
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */

arch/arm/vfp/vfpmodule.c

@@ -17,6 +17,8 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -528,6 +530,103 @@ void vfp_flush_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
+/*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+
+	/*
+	 * Disable VFP in the hwstate so that we can detect if it gets
+	 * used.
+	 */
+	hwstate->fpexc &= ~FPEXC_EN;
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/*
+	 * If VFP has been used, then disable it to avoid corrupting
+	 * the new thread state.
+	 */
+	if (hwstate->fpexc & FPEXC_EN)
+		vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
 /*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -38,7 +38,7 @@ static struct platform_device rtc_device = {
 	.name = "rtc-bfin",
 	.id   = -1,
 };
-#endif
+#endif	/* CONFIG_RTC_DRV_BFIN */
 
 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_UART0
@@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = {
 		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART0 */
 #ifdef CONFIG_SERIAL_BFIN_UART1
 static struct resource bfin_uart1_resources[] = {
 	{
@@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = {
 		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART1 */
 #ifdef CONFIG_SERIAL_BFIN_UART2
 static struct resource bfin_uart2_resources[] = {
 	{
@@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = {
 		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_UART2 */
+#endif	/* CONFIG_SERIAL_BFIN */
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 #ifdef CONFIG_BFIN_SIR0
@@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
 	.resource = bfin_sir0_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR0 */
 #ifdef CONFIG_BFIN_SIR1
 static struct resource bfin_sir1_resources[] = {
 	{
@@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
 	.resource = bfin_sir1_resources,
 };
-#endif
+#endif	/* CONFIG_BFIN_SIR1 */
 #ifdef CONFIG_BFIN_SIR2
 static struct resource bfin_sir2_resources[] = {
 	{
@@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = {
 	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
 	.resource = bfin_sir2_resources,
 };
-#endif
-#endif
+#endif	/* CONFIG_BFIN_SIR2 */
+#endif	/* CONFIG_BFIN_SIR */
 
 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
@@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = {
 		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 static struct resource bfin_sport1_uart_resources[] = {
 	{
@@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = {
 		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
 static struct resource bfin_sport2_uart_resources[] = {
 	{
@@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = {
 		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
 #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
 static struct resource bfin_sport3_uart_resources[] = {
 	{
@@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = {
 		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
 	},
 };
-#endif
-#endif
+#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
+#endif	/* CONFIG_SERIAL_BFIN_SPORT */
 
 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 static unsigned short bfin_can_peripherals[] = {
@@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = {
 		.platform_data = &bfin_can_peripherals, /* Passed to driver */
 	},
 };
-#endif
+#endif	/* CONFIG_CAN_BFIN */
 
 /*
  *  USB-LAN EzExtender board
@@ -488,7 +488,7 @@ static struct platform_device smc91x_device = {
 		.platform_data	= &smc91x_info,
 	},
 };
-#endif
+#endif	/* CONFIG_SMC91X */
 
 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
 /* all SPI peripherals info goes here */
@@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = {
 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
 };
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
+#endif	/* CONFIG_SPI_BFIN5XX */
 
 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 #include <linux/spi/ad7879.h>
@@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.gpio_export		= 1,	/* Export GPIO to gpiolib */
 	.gpio_base		= -1,	/* Dynamic allocation */
 };
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
 
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 #include <asm/bfin-lq035q1.h>
@@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = {
 		.platform_data = &bfin_lq035q1_data,
 	},
 };
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 
 static struct spi_board_info bf538_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) \
@@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
-#endif
+#endif	/* CONFIG_MTD_M25P80 */
 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 	{
 		.modalias = "ad7879",
@@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 1,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 	{
 		.modalias = "bfin-lq035q1-spi",
@@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.chip_select = 2,
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
-#endif
+#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 	{
 		.modalias = "spidev",
@@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 1,
 	},
-#endif
+#endif	/* CONFIG_SPI_SPIDEV */
 };
 
 /* SPI (0) */
@@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = {
 		},
 };
 
-#endif  /* spi master and devices */
-
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
 	[0] = {
@@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = {
 	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
 	.resource = bfin_twi1_resource,
 };
-#endif
-#endif
+#endif	/* CONFIG_BF542 */
+#endif	/* CONFIG_I2C_BLACKFIN_TWI */
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/gpio_keys.h>

arch/hexagon/kernel/dma.c

@@ -22,6 +22,7 @@
 #include <linux/bootmem.h>
 #include <linux/genalloc.h>
 #include <asm/dma-mapping.h>
+#include <linux/module.h>
 
 struct dma_map_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);

arch/hexagon/kernel/process.c

@@ -1,7 +1,7 @@
 /*
  * Process creation support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle;
 void cpu_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick(1);
+		tick_nohz_idle_enter();
 		local_irq_disable();
 		while (!need_resched()) {
 			idle_sleep();
@@ -97,7 +97,7 @@ void cpu_idle(void)
 			local_irq_disable();
 		}
 		local_irq_enable();
-		tick_nohz_restart_sched_tick();
+		tick_nohz_idle_exit();
 		schedule();
 	}
 }

arch/hexagon/kernel/ptrace.c

@@ -28,6 +28,7 @@
 #include <linux/ptrace.h>
 #include <linux/regset.h>
 #include <linux/user.h>
+#include <linux/elf.h>
 
 #include <asm/user.h>
 

arch/hexagon/kernel/smp.c

@@ -1,7 +1,7 @@
 /*
  * SMP support for Hexagon
  *
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/spinlock.h>
+#include <linux/cpu.h>
 
 #include <asm/time.h>    /*  timer_interrupt  */
 #include <asm/hexagon_vm.h>
@@ -177,7 +178,12 @@ void __cpuinit start_secondary(void)
 
 	printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
 
+	notify_cpu_starting(cpu);
+
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
+	ipi_call_unlock();
+
 	local_irq_enable();
 
 	cpu_idle();

arch/hexagon/kernel/time.c

@@ -28,6 +28,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/module.h>
 
 #include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>

arch/hexagon/kernel/vdso.c

@@ -21,6 +21,7 @@
 #include <linux/err.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
+#include <linux/binfmts.h>
 
 #include <asm/vdso.h>
 

arch/mips/ath79/dev-wmac.c

@@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(void)
 
 static int ar933x_wmac_reset(void)
 {
-	ath79_device_reset_clear(AR933X_RESET_WMAC);
 	ath79_device_reset_set(AR933X_RESET_WMAC);
+	ath79_device_reset_clear(AR933X_RESET_WMAC);
 
 	return 0;
 }

arch/mips/include/asm/mach-jz4740/irq.h

@@ -45,7 +45,7 @@
 #define JZ4740_IRQ_LCD		JZ4740_IRQ(30)
 
 /* 2nd-level interrupts */
-#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (X))
+#define JZ4740_IRQ_DMA(x)	(JZ4740_IRQ(32) + (x))
 
 #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x))
 #define JZ4740_IRQ_GPIO(x)	(JZ4740_IRQ(48) + (x))

arch/mips/include/asm/mmu_context.h

@@ -37,12 +37,6 @@ extern void tlbmiss_handler_setup_pgd(unsigned long pgd);
 		write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
 	} while (0)
 
-
-static inline unsigned long get_current_pgd(void)
-{
-	return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
-}
-
 #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using  pgd_current*/
 
 /*

arch/mips/kernel/signal.c

@@ -257,11 +257,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -286,11 +283,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -362,10 +356,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -401,10 +392,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)
@@ -580,12 +568,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	if (ret)
 		return ret;
 
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	block_sigmask(ka, sig);
 
 	return ret;
 }

arch/mips/kernel/signal32.c

@@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 		return -EFAULT;
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&blocked);
 
 	sig = restore_sigcontext32(&regs, &frame->sf_sc);
 	if (sig < 0)
@@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext32(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/mips/kernel/signal_n32.c

@@ -93,11 +93,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
 	sigset_from_compat(&newset, &uset);
 	sigdelsetmask(&newset, ~_BLOCKABLE);
 
-	spin_lock_irq(&current->sighand->siglock);
 	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&newset);
 
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
@@ -121,10 +118,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs)
 		goto badframe;
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	set_current_blocked(&set);
 
 	sig = restore_sigcontext(&regs, &frame->rs_uc.uc_mcontext);
 	if (sig < 0)

arch/parisc/kernel/pdc_cons.c

@@ -104,7 +104,7 @@ static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
 
 static void pdc_console_tty_close(struct tty_struct *tty, struct file *filp)
 {
-	if (!tty->count) {
+	if (tty->count == 1) {
 		del_timer_sync(&pdc_console_timer);
 		tty_port_tty_set(&tty_port, NULL);
 	}

arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi

@@ -0,0 +1,43 @@
+/*
+ * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+message@42400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x42400 0x200>;
+	interrupts = <
+		0xb4 2 0 0
+		0xb5 2 0 0
+		0xb6 2 0 0
+		0xb7 2 0 0>;
+};

arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi

@@ -53,6 +53,16 @@ timer@41100 {
 		      3 0 3 0>;
 };
 
+message@41400 {
+	compatible = "fsl,mpic-v3.1-msgr";
+	reg = <0x41400 0x200>;
+	interrupts = <
+		0xb0 2 0 0
+		0xb1 2 0 0
+		0xb2 2 0 0
+		0xb3 2 0 0>;
+};
+
 msi@41600 {
 	compatible = "fsl,mpic-msi";
 	reg = <0x41600 0x80>;

arch/powerpc/include/asm/irq.h

@@ -18,10 +18,6 @@
 #include <linux/atomic.h>
 
 
-/* Define a way to iterate across irqs. */
-#define for_each_irq(i) \
-	for ((i) = 0; (i) < NR_IRQS; ++(i))
-
 extern atomic_t ppc_n_lost_interrupts;
 
 /* This number is used when no interrupt has been assigned */

arch/powerpc/include/asm/mpic.h

@@ -275,9 +275,6 @@ struct mpic
 	unsigned int		isu_mask;
 	/* Number of sources */
 	unsigned int		num_sources;
-	/* default senses array */
-	unsigned char		*senses;
-	unsigned int		senses_count;
 
 	/* vector numbers used for internal sources (ipi/timers) */
 	unsigned int		ipi_vecs[4];
@@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node,
 extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 			    phys_addr_t phys_addr);
 
-/* Set default sense codes
- *
- * @mpic:	controller
- * @senses:	array of sense codes
- * @count:	size of above array
- *
- * Optionally provide an array (indexed on hardware interrupt numbers
- * for this MPIC) of default sense codes for the chip. Those are linux
- * sense codes IRQ_TYPE_*
- *
- * The driver gets ownership of the pointer, don't dispose of it or
- * anything like that. __init only.
- */
-extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
-
 
 /* Initialize the controller. After this has been called, none of the above
  * should be called again for this mpic

arch/powerpc/include/asm/mpic_msgr.h

@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/spinlock.h>
+#include <asm/smp.h>
 
 struct mpic_msgr {
 	u32 __iomem *base;

arch/powerpc/include/asm/reg_booke.h

@@ -15,11 +15,6 @@
 #ifndef __ASM_POWERPC_REG_BOOKE_H__
 #define __ASM_POWERPC_REG_BOOKE_H__
 
-#ifdef CONFIG_BOOKE_WDT
-extern u32 booke_wdt_enabled;
-extern u32 booke_wdt_period;
-#endif /* CONFIG_BOOKE_WDT */
-
 /* Machine State Register (MSR) Fields */
 #define MSR_GS		(1<<28) /* Guest state */
 #define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */

arch/powerpc/kernel/irq.c

@@ -330,14 +330,10 @@ void migrate_irqs(void)
 
 	alloc_cpumask_var(&mask, GFP_KERNEL);
 
-	for_each_irq(irq) {
+	for_each_irq_desc(irq, desc) {
 		struct irq_data *data;
 		struct irq_chip *chip;
 
-		desc = irq_to_desc(irq);
-		if (!desc)
-			continue;
-
 		data = irq_desc_get_irq_data(desc);
 		if (irqd_is_per_cpu(data))
 			continue;

arch/powerpc/kernel/machine_kexec.c

@@ -23,14 +23,11 @@
 
 void machine_kexec_mask_interrupts(void) {
 	unsigned int i;
+	struct irq_desc *desc;
 
-	for_each_irq(i) {
-		struct irq_desc *desc = irq_to_desc(i);
+	for_each_irq_desc(i, desc) {
 		struct irq_chip *chip;
 
-		if (!desc)
-			continue;
-
 		chip = irq_desc_get_chip(desc);
 		if (!chip)
 			continue;

arch/powerpc/kernel/setup_32.c

@@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr)
 }
 
 #ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+
 /* Checks wdt=x and wdt_period=xx command-line option */
 notrace int __init early_parse_wdt(char *p)
 {

arch/powerpc/net/bpf_jit.h

@@ -48,7 +48,13 @@
 /*
  * Assembly helpers from arch/powerpc/net/bpf_jit.S:
  */
-extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[];
+#define DECLARE_LOAD_FUNC(func)	\
+	extern u8 func[], func##_negative_offset[], func##_positive_offset[]
+
+DECLARE_LOAD_FUNC(sk_load_word);
+DECLARE_LOAD_FUNC(sk_load_half);
+DECLARE_LOAD_FUNC(sk_load_byte);
+DECLARE_LOAD_FUNC(sk_load_byte_msh);
 
 #define FUNCTION_DESCR_SIZE	24
 

arch/powerpc/net/bpf_jit_64.S

@@ -31,14 +31,13 @@
  * then branch directly to slow_path_XXX if required.  (In fact, could
  * load a spare GPR with the address of slow_path_generic and pass size
  * as an argument, making the call site a mtlr, li and bllr.)
- *
- * Technically, the "is addr < 0" check is unnecessary & slowing down
- * the ABS path, as it's statically checked on generation.
  */
 	.globl	sk_load_word
 sk_load_word:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_word_neg
+	.globl	sk_load_word_positive_offset
+sk_load_word_positive_offset:
 	/* Are we accessing past headlen? */
 	subi	r_scratch1, r_HL, 4
 	cmpd	r_scratch1, r_addr
@@ -51,7 +50,9 @@ sk_load_word:
 	.globl	sk_load_half
 sk_load_half:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_half_neg
+	.globl	sk_load_half_positive_offset
+sk_load_half_positive_offset:
 	subi	r_scratch1, r_HL, 2
 	cmpd	r_scratch1, r_addr
 	blt	bpf_slow_path_half
@@ -61,7 +62,9 @@ sk_load_half:
 	.globl	sk_load_byte
 sk_load_byte:
 	cmpdi	r_addr, 0
-	blt	bpf_error
+	blt	bpf_slow_path_byte_neg
+	.globl	sk_load_byte_positive_offset
+sk_load_byte_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte
 	lbzx	r_A, r_D, r_addr
@@ -69,22 +72,20 @@ sk_load_byte:
 
 /*
  * BPF_S_LDX_B_MSH: ldxb  4*([offset]&0xf)
- * r_addr is the offset value, already known positive
+ * r_addr is the offset value
  */
 	.globl sk_load_byte_msh
 sk_load_byte_msh:
+	cmpdi	r_addr, 0
+	blt	bpf_slow_path_byte_msh_neg
+	.globl sk_load_byte_msh_positive_offset
+sk_load_byte_msh_positive_offset:
 	cmpd	r_HL, r_addr
 	ble	bpf_slow_path_byte_msh
 	lbzx	r_X, r_D, r_addr
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
 
-bpf_error:
-	/* Entered with cr0 = lt */
-	li	r3, 0
-	/* Generated code will 'blt epilogue', returning 0. */
-	blr
-
 /* Call out to skb_copy_bits:
  * We'll need to back up our volatile regs first; we have
  * local variable space at r1+(BPF_PPC_STACK_BASIC).
@@ -136,3 +137,84 @@ bpf_slow_path_byte_msh:
 	lbz	r_X, BPF_PPC_STACK_BASIC+(2*8)(r1)
 	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
 	blr
+
+/* Call out to bpf_internal_load_pointer_neg_helper:
+ * We'll need to back up our volatile regs first; we have
+ * local variable space at r1+(BPF_PPC_STACK_BASIC).
+ * Allocate a new stack frame here to remain ABI-compliant in
+ * stashing LR.
+ */
+#define sk_negative_common(SIZE)				\
+	mflr	r0;						\
+	std	r0, 16(r1);					\
+	/* R3 goes in parameter space of caller's frame */	\
+	std	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	std	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	std	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	stdu	r1, -BPF_PPC_SLOWPATH_FRAME(r1);		\
+	/* R3 = r_skb, as passed */				\
+	mr	r4, r_addr;					\
+	li	r5, SIZE;					\
+	bl	bpf_internal_load_pointer_neg_helper;		\
+	/* R3 != 0 on success */				\
+	addi	r1, r1, BPF_PPC_SLOWPATH_FRAME;			\
+	ld	r0, 16(r1);					\
+	ld	r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1);		\
+	ld	r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1);		\
+	mtlr	r0;						\
+	cmpldi	r3, 0;						\
+	beq	bpf_error_slow;	/* cr0 = EQ */			\
+	mr	r_addr, r3;					\
+	ld	r_skb, (BPF_PPC_STACKFRAME+48)(r1);		\
+	/* Great success! */
+
+bpf_slow_path_word_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_word_negative_offset
+sk_load_word_negative_offset:
+	sk_negative_common(4)
+	lwz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_half_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_half_negative_offset
+sk_load_half_negative_offset:
+	sk_negative_common(2)
+	lhz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_negative_offset
+sk_load_byte_negative_offset:
+	sk_negative_common(1)
+	lbz	r_A, 0(r_addr)
+	blr
+
+bpf_slow_path_byte_msh_neg:
+	lis     r_scratch1,-32	/* SKF_LL_OFF */
+	cmpd	r_addr, r_scratch1	/* addr < SKF_* */
+	blt	bpf_error	/* cr0 = LT */
+	.globl	sk_load_byte_msh_negative_offset
+sk_load_byte_msh_negative_offset:
+	sk_negative_common(1)
+	lbz	r_X, 0(r_addr)
+	rlwinm	r_X, r_X, 2, 32-4-2, 31-2
+	blr
+
+bpf_error_slow:
+	/* fabricate a cr0 = lt */
+	li	r_scratch1, -1
+	cmpdi	r_scratch1, 0
+bpf_error:
+	/* Entered with cr0 = lt */
+	li	r3, 0
+	/* Generated code will 'blt epilogue', returning 0. */
+	blr

arch/powerpc/net/bpf_jit_comp.c

@@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	PPC_BLR();
 }
 
+#define CHOOSE_LOAD_FUNC(K, func) \
+	((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset)
+
 /* Assemble the body code between the prologue & epilogue. */
 static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			      struct codegen_context *ctx,
@@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 
 			/*** Absolute loads from packet header/data ***/
 		case BPF_S_LD_W_ABS:
-			func = sk_load_word;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_word);
 			goto common_load;
 		case BPF_S_LD_H_ABS:
-			func = sk_load_half;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_half);
 			goto common_load;
 		case BPF_S_LD_B_ABS:
-			func = sk_load_byte;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte);
 		common_load:
-			/*
-			 * Load from [K].  Reference with the (negative)
-			 * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported.
-			 */
+			/* Load from [K]. */
 			ctx->seen |= SEEN_DATAREF;
-			if ((int)K < 0)
-				return -ENOTSUPP;
 			PPC_LI64(r_scratch1, func);
 			PPC_MTLR(r_scratch1);
 			PPC_LI32(r_addr, K);
@@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 		common_load_ind:
 			/*
 			 * Load from [X + K].  Negative offsets are tested for
-			 * in the helper functions, and result in a 'ret 0'.
+			 * in the helper functions.
 			 */
 			ctx->seen |= SEEN_DATAREF | SEEN_XREG;
 			PPC_LI64(r_scratch1, func);
@@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image,
 			break;
 
 		case BPF_S_LDX_B_MSH:
-			/*
-			 * x86 version drops packet (RET 0) when K<0, whereas
-			 * interpreter does allow K<0 (__load_pointer, special
-			 * ancillary data).  common_load returns ENOTSUPP if K<0,
-			 * so we fall back to interpreter & filter works.
-			 */
-			func = sk_load_byte_msh;
+			func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh);
 			goto common_load;
 			break;
 

arch/powerpc/platforms/85xx/common.c

@@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
 	{ .compatible = "fsl,qe", },
 	{ .compatible = "fsl,cpm2", },
 	{ .compatible = "fsl,srio", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
+	/* For the PMC driver */
+	{ .compatible = "fsl,mpc8548-guts", },
+	/* Probably unnecessary? */
+	{ .compatible = "gpio-leds", },
 	{},
 };
 

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -399,12 +399,6 @@ static int __init board_fixups(void)
 machine_arch_initcall(mpc8568_mds, board_fixups);
 machine_arch_initcall(mpc8569_mds, board_fixups);
 
-static struct of_device_id mpc85xx_ids[] = {
-	{ .compatible = "fsl,mpc8548-guts", },
-	{ .compatible = "gpio-leds", },
-	{},
-};
-
 static int __init mpc85xx_publish_devices(void)
 {
 	if (machine_is(mpc8568_mds))
@@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
-	mpc85xx_common_publish_devices();
-	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
-
-	return 0;
+	return mpc85xx_common_publish_devices();
 }
 
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void)
 	pr_info("Freescale P1022 DS reference board\n");
 }
 
-static struct of_device_id __initdata p1022_ds_ids[] = {
-	/* So that the DMA channel nodes can be probed individually: */
-	{ .compatible = "fsl,eloplus-dma", },
-	{},
-};
-
-static int __init p1022_ds_publish_devices(void)
-{
-	mpc85xx_common_publish_devices();
-	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
-}
-machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
 
 machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
 

arch/powerpc/platforms/cell/axon_msi.c

@@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc)
 		pr_devel("axon_msi: woff %x roff %x msi %x\n",
 			  write_offset, msic->read_offset, msi);
 
-		if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) {
+		if (msi < nr_irqs && irq_get_chip_data(msi) == msic) {
 			generic_handle_irq(msi);
 			msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
 		} else {
@@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	if (rc)
 		return rc;
 
-	/* We rely on being able to stash a virq in a u16 */
-	BUILD_BUG_ON(NR_IRQS > 65536);
-
 	list_for_each_entry(entry, &dev->msi_list, list) {
 		virq = irq_create_direct_mapping(msic->irq_domain);
 		if (virq == NO_IRQ) {
@@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device)
 	}
 	memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
 
-	msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic);
+	/* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */
+	msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic);
 	if (!msic->irq_domain) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n",
 		       dn->full_name);

arch/powerpc/platforms/cell/beat_interrupt.c

@@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void)
 {
 	int	i;
 
-	for (i = 1; i < NR_IRQS; i++)
+	for (i = 1; i < nr_irqs; i++)
 		beat_destruct_irq_plug(i);
 }

arch/powerpc/platforms/powermac/low_i2c.c

@@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data)
 	unsigned long flags;
 
 	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * If the timer is pending, that means we raced with the
+	 * irq, in which case we just return
+	 */
+	if (timer_pending(&host->timeout_timer))
+		goto skip;
+
 	kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 	if (host->state != state_idle) {
 		host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 		add_timer(&host->timeout_timer);
 	}
+ skip:
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 

arch/powerpc/platforms/powermac/pic.c

@@ -57,9 +57,9 @@ static int max_real_irqs;
 
 static DEFINE_RAW_SPINLOCK(pmac_pic_lock);
 
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-static unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+/* The max irq number this driver deals with is 128; see max_irqs */
+static DECLARE_BITMAP(ppc_lost_interrupts, 128);
+static DECLARE_BITMAP(ppc_cached_irq_mask, 128);
 static int pmac_irq_cascade = -1;
 static struct irq_domain *pmac_pic_host;
 

arch/powerpc/platforms/pseries/Kconfig

@@ -30,9 +30,9 @@ config PPC_SPLPAR
 	  two or more partitions.
 
 config EEH
-	bool "PCI Extended Error Handling (EEH)" if EXPERT
+	bool
 	depends on PPC_PSERIES && PCI
-	default y if !EXPERT
+	default y
 
 config PSERIES_MSI
        bool

arch/powerpc/platforms/pseries/eeh.c

@@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev)
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
 
 	dn = pci_device_to_OF_node(dev);
-	edev = pci_dev_to_eeh_dev(dev);
+	edev = of_node_to_eeh_dev(dn);
 	if (edev->pdev == dev) {
 		pr_debug("EEH: Already referenced !\n");
 		return;

arch/powerpc/sysdev/cpm2_pic.c

@@ -51,8 +51,7 @@
 static intctl_cpm2_t __iomem *cpm2_intctl;
 
 static struct irq_domain *cpm2_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */
 
 static const u_char irq_to_siureg[] = {
 	1, 1, 1, 1, 1, 1, 1, 1,

arch/powerpc/sysdev/mpc8xx_pic.c

@@ -18,69 +18,45 @@
 extern int cpm_get_irq(struct pt_regs *regs);
 
 static struct irq_domain *mpc8xx_pic_host;
-#define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
-static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
+static unsigned long mpc8xx_cached_irq_mask;
 static sysconf8xx_t __iomem *siu_reg;
 
-int cpm_get_irq(struct pt_regs *regs);
+static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d)
+{
+	return 0x80000000 >> irqd_to_hwirq(d);
+}
 
 static void mpc8xx_unmask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_mask_irq(struct irq_data *d)
 {
-	int	bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static void mpc8xx_ack(struct irq_data *d)
 {
-	int	bit;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	out_be32(&siu_reg->sc_sipend, 1 << (31-bit));
+	out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d));
 }
 
 static void mpc8xx_end_irq(struct irq_data *d)
 {
-	int bit, word;
-	unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d);
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]);
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
 }
 
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
-		irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d);
+	/* only external IRQ senses are programmable */
+	if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) {
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
-
-		/* only external IRQ senses are programmable */
-		if ((hw & 1) == 0) {
-			siel |= (0x80000000 >> hw);
-			out_be32(&siu_reg->sc_siel, siel);
-			__irq_set_handler_locked(d->irq, handle_edge_irq);
-		}
+		siel |= mpc8xx_irqd_to_bit(d);
+		out_be32(&siu_reg->sc_siel, siel);
+		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	}
 	return 0;
 }
@@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
 		IRQ_TYPE_EDGE_FALLING,
 	};
 
+	if (intspec[0] > 0x1f)
+		return 0;
+
 	*out_hwirq = intspec[0];
 	if (intsize > 1 && intspec[1] < 4)
 		*out_flags = map_pic_senses[intspec[1]];

arch/powerpc/sysdev/mpic.c

@@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq)
 }
 
 /* Determine if the linux irq is an IPI */
-static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
 }
 
 /* Determine if the linux irq is a timer */
-static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
+static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src)
 {
-	unsigned int src = virq_to_hw(irq);
-
 	return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
 }
 
@@ -876,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	if (src >= mpic->num_sources)
 		return -EINVAL;
 
-	if (flow_type == IRQ_TYPE_NONE)
-		if (mpic->senses && src < mpic->senses_count)
-			flow_type = mpic->senses[src];
-	if (flow_type == IRQ_TYPE_NONE)
-		flow_type = IRQ_TYPE_LEVEL_LOW;
+	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 
+	/* We don't support "none" type */
+	if (flow_type == IRQ_TYPE_NONE)
+		flow_type = IRQ_TYPE_DEFAULT;
+
+	/* Default: read HW settings */
+	if (flow_type == IRQ_TYPE_DEFAULT) {
+		switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+			       MPIC_INFO(VECPRI_SENSE_MASK))) {
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_EDGE_RISING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_EDGE) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_EDGE_FALLING;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_POSITIVE):
+				flow_type = IRQ_TYPE_LEVEL_HIGH;
+				break;
+			case MPIC_INFO(VECPRI_SENSE_LEVEL) |
+			     MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
+				flow_type = IRQ_TYPE_LEVEL_LOW;
+				break;
+		}
+	}
+
+	/* Apply to irq desc */
 	irqd_set_trigger_type(d, flow_type);
 
+	/* Apply to HW */
 	if (mpic_is_ht_interrupt(mpic, src))
 		vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
 			MPIC_VECPRI_SENSE_EDGE;
 	else
 		vecpri = mpic_type_to_vecpri(mpic, flow_type);
 
-	vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
 	vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
 			MPIC_INFO(VECPRI_SENSE_MASK));
 	vnew |= vecpri;
@@ -1026,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
 	irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq);
 
 	/* Set default irq type */
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+	irq_set_irq_type(virq, IRQ_TYPE_DEFAULT);
 
 	/* If the MPIC was reset, then all vectors have already been
 	 * initialized.  Otherwise, a per source lazy initialization
@@ -1417,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
 		mpic->num_sources = isu_first + mpic->isu_size;
 }
 
-void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
-{
-	mpic->senses = senses;
-	mpic->senses_count = count;
-}
-
 void __init mpic_init(struct mpic *mpic)
 {
 	int i, cpu;
@@ -1555,12 +1569,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 		return;
 
 	raw_spin_lock_irqsave(&mpic_lock, flags);
-	if (mpic_is_ipi(mpic, irq)) {
+	if (mpic_is_ipi(mpic, src)) {
 		reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_ipi_write(src - mpic->ipi_vecs[0],
 			       reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
-	} else if (mpic_is_tm(mpic, irq)) {
+	} else if (mpic_is_tm(mpic, src)) {
 		reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
 			~MPIC_VECPRI_PRIORITY_MASK;
 		mpic_tm_write(src - mpic->timer_vecs[0],

arch/powerpc/sysdev/mpic_msgr.c

@@ -27,6 +27,7 @@
 
 static struct mpic_msgr **mpic_msgrs;
 static unsigned int mpic_msgr_count;
+static DEFINE_RAW_SPINLOCK(msgrs_lock);
 
 static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
 {
@@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num)
 	if (reg_num >= mpic_msgr_count)
 		return ERR_PTR(-ENODEV);
 
-	raw_spin_lock_irqsave(&msgr->lock, flags);
-	if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
-		msgr = mpic_msgrs[reg_num];
+	raw_spin_lock_irqsave(&msgrs_lock, flags);
+	msgr = mpic_msgrs[reg_num];
+	if (msgr->in_use == MSGR_FREE)
 		msgr->in_use = MSGR_INUSE;
-	}
-	raw_spin_unlock_irqrestore(&msgr->lock, flags);
+	raw_spin_unlock_irqrestore(&msgrs_lock, flags);
 
 	return msgr;
 }
@@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev)
 
 		reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
 		msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
-		msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
+		msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET);
 		msgr->in_use = MSGR_FREE;
 		msgr->num = i;
 		raw_spin_lock_init(&msgr->lock);

arch/powerpc/sysdev/scom.c

@@ -22,6 +22,7 @@
 #include <linux/debugfs.h>
 #include <linux/slab.h>
 #include <linux/export.h>
+#include <asm/debug.h>
 #include <asm/prom.h>
 #include <asm/scom.h>
 

arch/powerpc/sysdev/xics/xics-common.c

@@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void)
 {
 	int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id();
 	unsigned int irq, virq;
+	struct irq_desc *desc;
 
 	/* If we used to be the default server, move to the new "boot_cpuid" */
 	if (hw_cpu == xics_default_server)
@@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void)
 	/* Allow IPIs again... */
 	icp_ops->set_priority(DEFAULT_PRIORITY);
 
-	for_each_irq(virq) {
-		struct irq_desc *desc;
+	for_each_irq_desc(virq, desc) {
 		struct irq_chip *chip;
 		long server;
 		unsigned long flags;
@@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void)
 		/* We can't set affinity on ISA interrupts */
 		if (virq < NUM_ISA_INTERRUPTS)
 			continue;
-		desc = irq_to_desc(virq);
 		/* We only need to migrate enabled IRQS */
-		if (!desc || !desc->action)
+		if (!desc->action)
 			continue;
 		if (desc->irq_data.domain != xics_host)
 			continue;

arch/sh/include/asm/atomic.h

@@ -11,7 +11,7 @@
 #include <linux/types.h>
 #include <asm/cmpxchg.h>
 
-#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+#define ATOMIC_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)		((v)->counter = (i))

arch/sh/mm/fault_32.c

@@ -86,7 +86,7 @@ static noinline int vmalloc_fault(unsigned long address)
 	pte_t *pte_k;
 
 	/* Make sure we are in vmalloc/module/P3 area: */
-	if (!(address >= VMALLOC_START && address < P3_ADDR_MAX))
+	if (!(address >= P3SEG && address < P3_ADDR_MAX))
 		return -1;
 
 	/*

arch/tile/include/asm/pci.h

@@ -47,8 +47,8 @@ struct pci_controller {
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-int __devinit tile_pci_init(void);
-int __devinit pcibios_init(void);
+int __init tile_pci_init(void);
+int __init pcibios_init(void);
 
 static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
 

arch/tile/kernel/pci.c

@@ -141,7 +141,7 @@ static int __devinit tile_init_irqs(int controller_id,
  *
  * Returns the number of controllers discovered.
  */
-int __devinit tile_pci_init(void)
+int __init tile_pci_init(void)
 {
 	int i;
 
@@ -287,7 +287,7 @@ static void __devinit fixup_read_and_payload_sizes(void)
  * The controllers have been set up by the time we get here, by a call to
  * tile_pci_init.
  */
-int __devinit pcibios_init(void)
+int __init pcibios_init(void)
 {
 	int i;
 

arch/x86/Kconfig

@@ -81,7 +81,7 @@ config X86
 	select CLKEVT_I8253
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_IOMAP
-	select DCACHE_WORD_ACCESS if !DEBUG_PAGEALLOC
+	select DCACHE_WORD_ACCESS
 
 config INSTRUCTION_DECODER
 	def_bool (KPROBES || PERF_EVENTS)

arch/x86/boot/compressed/head_32.S

@@ -33,6 +33,9 @@
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
+	jmp	preferred_addr
+
+	.balign	0x10
 	/*
 	 * We don't need the return address, so set up the stack so
 	 * efi_main() can find its arugments.
@@ -41,12 +44,17 @@ ENTRY(startup_32)
 
 	call	efi_main
 	cmpl	$0, %eax
-	je	preferred_addr
 	movl	%eax, %esi
-	call	1f
+	jne	2f
 1:
+	/* EFI init failed, so hang. */
+	hlt
+	jmp	1b
+2:
+	call	3f
+3:
 	popl	%eax
-	subl	$1b, %eax
+	subl	$3b, %eax
 	subl	BP_pref_address(%esi), %eax
 	add	BP_code32_start(%esi), %eax
 	leal	preferred_addr(%eax), %eax