w1: w1_therm: fix locking behavior in convert_t

[ Upstream commit dca5480ab7 ]

The commit 67b392f7b8 ("w1_therm: optimizing temperature read timings")
accidentially inverted the logic for lock handling of the bus mutex.

Before:
  pullup -> release lock before sleep
  no pullup -> release lock after sleep

After:
  pullup -> release lock after sleep
  no pullup -> release lock before sleep

This cause spurious measurements of 85 degree (powerup value) on the
Tarragon board with connected 1-w temperature sensor
(w1_therm.w1_strong_pull=0).

In the meantime a new feature for polling the conversion
completion has been integrated in these branches with
commit 021da53e65 ("w1: w1_therm: Add sysfs entries to control
conversion time and driver features"). But this feature isn't
available for parasite power mode, so handle this separately.

Link: https://lore.kernel.org/regressions/2023042645-attentive-amends-7b0b@gregkh/T/
Fixes: 67b392f7b8 ("w1_therm: optimizing temperature read timings")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230427112152.12313-1-stefan.wahren@i2se.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/w1/slaves/w1_therm.c

@@ -1093,29 +1093,26 @@ static int convert_t(struct w1_slave *sl, struct therm_info *info)
 
 			w1_write_8(dev_master, W1_CONVERT_TEMP);
 
-			if (strong_pullup) { /*some device need pullup */
+			if (SLAVE_FEATURES(sl) & W1_THERM_POLL_COMPLETION) {
+				ret = w1_poll_completion(dev_master, W1_POLL_CONVERT_TEMP);
+				if (ret) {
+					dev_dbg(&sl->dev, "%s: Timeout\n", __func__);
+					goto mt_unlock;
+				}
+				mutex_unlock(&dev_master->bus_mutex);
+			} else if (!strong_pullup) { /*no device need pullup */
 				sleep_rem = msleep_interruptible(t_conv);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
 					goto mt_unlock;
 				}
 				mutex_unlock(&dev_master->bus_mutex);
-			} else { /*no device need pullup */
-				if (SLAVE_FEATURES(sl) & W1_THERM_POLL_COMPLETION) {
-					ret = w1_poll_completion(dev_master, W1_POLL_CONVERT_TEMP);
-					if (ret) {
-						dev_dbg(&sl->dev, "%s: Timeout\n", __func__);
-						goto mt_unlock;
-					}
-					mutex_unlock(&dev_master->bus_mutex);
-				} else {
-					/* Fixed delay */
-					mutex_unlock(&dev_master->bus_mutex);
-					sleep_rem = msleep_interruptible(t_conv);
-					if (sleep_rem != 0) {
-						ret = -EINTR;
-						goto dec_refcnt;
-					}
+			} else { /*some device need pullup */
+				mutex_unlock(&dev_master->bus_mutex);
+				sleep_rem = msleep_interruptible(t_conv);
+				if (sleep_rem != 0) {
+					ret = -EINTR;
+					goto dec_refcnt;
 				}
 			}
 			ret = read_scratchpad(sl, info);