nvme: Add quirk for LiteON CL1 devices running FW 22301111

One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.

When this situation occurs the drive doesn't resume properly from
suspend-to-idle.

LiteON has confirmed this problem and fixed in the next firmware
version.  As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.

Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drivers/nvme/host/core.c

@@ -2257,6 +2257,16 @@ static const struct nvme_core_quirk_entry core_quirks[] = {
 		.vid = 0x1179,
 		.mn = "THNSF5256GPUK TOSHIBA",
 		.quirks = NVME_QUIRK_NO_APST,
+	},
+	{
+		/*
+		 * This LiteON CL1-3D*-Q11 firmware version has a race
+		 * condition associated with actions related to suspend to idle
+		 * LiteON has resolved the problem in future firmware
+		 */
+		.vid = 0x14a4,
+		.fr = "22301111",
+		.quirks = NVME_QUIRK_SIMPLE_SUSPEND,
 	}
 };
 

drivers/nvme/host/nvme.h

@@ -92,6 +92,11 @@ enum nvme_quirks {
 	 * Broken Write Zeroes.
 	 */
 	NVME_QUIRK_DISABLE_WRITE_ZEROES		= (1 << 9),
+
+	/*
+	 * Force simple suspend/resume path.
+	 */
+	NVME_QUIRK_SIMPLE_SUSPEND		= (1 << 10),
 };
 
 /*

drivers/nvme/host/pci.c

@@ -2876,7 +2876,8 @@ static int nvme_suspend(struct device *dev)
 	 * state (which may not be possible if the link is up).
 	 */
 	if (pm_suspend_via_firmware() || !ctrl->npss ||
-	    !pcie_aspm_enabled(pdev)) {
+	    !pcie_aspm_enabled(pdev) ||
+	    (ndev->ctrl.quirks & NVME_QUIRK_SIMPLE_SUSPEND)) {
 		nvme_dev_disable(ndev, true);
 		return 0;
 	}