MIPS: Alchemy: Add basic support for the GPR board
From: Wolfgang Grandegger <wg@denx.de> Add basic support for the General Purpose Router (GPR) board from Trapeze ITS. Signed-off-by: Wolfgang Grandegger <wg@denx.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Wolfgang Grandegger
Ralf Baechle
Родитель
f66736532a
Коммит
cb8f55b920
|
|
@ -128,6 +128,15 @@ config MIPS_XXS1500
|
|||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_GPR
|
||||
bool "Trapeze ITS GPR board"
|
||||
select SOC_AU1550
|
||||
select HW_HAS_PCI
|
||||
select DMA_NONCOHERENT
|
||||
select MIPS_DISABLE_OBSOLETE_IDE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
endchoice
|
||||
|
||||
config SOC_AU1000
|
||||
|
|
|
|||
|
|
@ -100,6 +100,11 @@ load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
|
|||
platform-$(CONFIG_MIPS_XXS1500) += alchemy/xxs1500/
|
||||
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Trapeze ITS GRP board
|
||||
#
|
||||
platform-$(CONFIG_MIPS_GPR) += alchemy/gpr/
|
||||
load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000
|
||||
|
||||
# boards can specify their own <gpio.h> in one of their include dirs.
|
||||
# If they do, placing this line here at the end will make sure the
|
||||
|
|
|
|||
|
|
@ -0,0 +1,8 @@
|
|||
#
|
||||
# Copyright 2003 MontaVista Software Inc.
|
||||
# Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
#
|
||||
# Makefile for Trapeze ITS GPR board.
|
||||
#
|
||||
|
||||
obj-y += board_setup.o init.o platform.o
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
/*
|
||||
* Copyright 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* Copyright 2000-2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR)
|
||||
#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR)
|
||||
|
||||
char irq_tab_alchemy[][5] __initdata = {
|
||||
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
|
||||
};
|
||||
|
||||
static void gpr_reset(char *c)
|
||||
{
|
||||
/* switch System-LED to orange (red# and green# on) */
|
||||
alchemy_gpio_direction_output(4, 0);
|
||||
alchemy_gpio_direction_output(5, 0);
|
||||
|
||||
/* trigger watchdog to reset board in 200ms */
|
||||
printk(KERN_EMERG "Triggering watchdog soft reset...\n");
|
||||
raw_local_irq_disable();
|
||||
alchemy_gpio_direction_output(1, 0);
|
||||
udelay(1);
|
||||
alchemy_gpio_set_value(1, 1);
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
static void gpr_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
printk(KERN_INFO "Tarpeze ITS GPR board\n");
|
||||
|
||||
pm_power_off = gpr_power_off;
|
||||
_machine_halt = gpr_power_off;
|
||||
_machine_restart = gpr_reset;
|
||||
|
||||
/* Enable UART3 */
|
||||
au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
|
||||
au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
|
||||
/* Enable UART1 */
|
||||
au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
|
||||
au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
|
||||
|
||||
/* Take away Reset of UMTS-card */
|
||||
alchemy_gpio_direction_output(215, 1);
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
#if defined(__MIPSEB__)
|
||||
au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
|
||||
#else
|
||||
au_writel(0xf, Au1500_PCI_CFG);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* Copyright 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "GPR";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str)
|
||||
memsize = 0x04000000;
|
||||
else
|
||||
strict_strtoul(memsize_str, 0, &memsize);
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
|
@ -0,0 +1,183 @@
|
|||
/*
|
||||
* GPR board platform device registration
|
||||
*
|
||||
* Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
/*
|
||||
* Watchdog
|
||||
*/
|
||||
static struct resource gpr_wdt_resource[] = {
|
||||
[0] = {
|
||||
.start = 1,
|
||||
.end = 1,
|
||||
.name = "gpr-adm6320-wdt",
|
||||
.flags = IORESOURCE_IRQ,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device gpr_wdt_device = {
|
||||
.name = "adm6320-wdt",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(gpr_wdt_resource),
|
||||
.resource = gpr_wdt_resource,
|
||||
};
|
||||
|
||||
/*
|
||||
* FLASH
|
||||
*
|
||||
* 0x00000000-0x00200000 : "kernel"
|
||||
* 0x00200000-0x00a00000 : "rootfs"
|
||||
* 0x01d00000-0x01f00000 : "config"
|
||||
* 0x01c00000-0x01d00000 : "yamon"
|
||||
* 0x01d00000-0x01d40000 : "yamon env vars"
|
||||
* 0x00000000-0x00a00000 : "kernel+rootfs"
|
||||
*/
|
||||
static struct mtd_partition gpr_mtd_partitions[] = {
|
||||
{
|
||||
.name = "kernel",
|
||||
.size = 0x00200000,
|
||||
.offset = 0,
|
||||
},
|
||||
{
|
||||
.name = "rootfs",
|
||||
.size = 0x00800000,
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
{
|
||||
.name = "config",
|
||||
.size = 0x00200000,
|
||||
.offset = 0x01d00000,
|
||||
},
|
||||
{
|
||||
.name = "yamon",
|
||||
.size = 0x00100000,
|
||||
.offset = 0x01c00000,
|
||||
},
|
||||
{
|
||||
.name = "yamon env vars",
|
||||
.size = 0x00040000,
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
},
|
||||
{
|
||||
.name = "kernel+rootfs",
|
||||
.size = 0x00a00000,
|
||||
.offset = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct physmap_flash_data gpr_flash_data = {
|
||||
.width = 4,
|
||||
.nr_parts = ARRAY_SIZE(gpr_mtd_partitions),
|
||||
.parts = gpr_mtd_partitions,
|
||||
};
|
||||
|
||||
static struct resource gpr_mtd_resource = {
|
||||
.start = 0x1e000000,
|
||||
.end = 0x1fffffff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
};
|
||||
|
||||
static struct platform_device gpr_mtd_device = {
|
||||
.name = "physmap-flash",
|
||||
.dev = {
|
||||
.platform_data = &gpr_flash_data,
|
||||
},
|
||||
.num_resources = 1,
|
||||
.resource = &gpr_mtd_resource,
|
||||
};
|
||||
|
||||
/*
|
||||
* LEDs
|
||||
*/
|
||||
static struct gpio_led gpr_gpio_leds[] = {
|
||||
{ /* green */
|
||||
.name = "gpr:green",
|
||||
.gpio = 4,
|
||||
.active_low = 1,
|
||||
},
|
||||
{ /* red */
|
||||
.name = "gpr:red",
|
||||
.gpio = 5,
|
||||
.active_low = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data gpr_led_data = {
|
||||
.num_leds = ARRAY_SIZE(gpr_gpio_leds),
|
||||
.leds = gpr_gpio_leds,
|
||||
};
|
||||
|
||||
static struct platform_device gpr_led_devices = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &gpr_led_data,
|
||||
}
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C
|
||||
*/
|
||||
static struct i2c_gpio_platform_data gpr_i2c_data = {
|
||||
.sda_pin = 209,
|
||||
.sda_is_open_drain = 1,
|
||||
.scl_pin = 210,
|
||||
.scl_is_open_drain = 1,
|
||||
.udelay = 2, /* ~100 kHz */
|
||||
.timeout = HZ,
|
||||
};
|
||||
|
||||
static struct platform_device gpr_i2c_device = {
|
||||
.name = "i2c-gpio",
|
||||
.id = -1,
|
||||
.dev.platform_data = &gpr_i2c_data,
|
||||
};
|
||||
|
||||
static struct i2c_board_info gpr_i2c_info[] __initdata = {
|
||||
{
|
||||
I2C_BOARD_INFO("lm83", 0x18),
|
||||
.type = "lm83"
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device *gpr_devices[] __initdata = {
|
||||
&gpr_wdt_device,
|
||||
&gpr_mtd_device,
|
||||
&gpr_i2c_device,
|
||||
&gpr_led_devices,
|
||||
};
|
||||
|
||||
static int __init gpr_dev_init(void)
|
||||
{
|
||||
i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
|
||||
|
||||
return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
|
||||
}
|
||||
device_initcall(gpr_dev_init);
|
||||
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
Загрузка…
Ссылка в новой задаче