media: ov8865: Disable only enabled regulators on error path

If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.

Fix this by disabling only clocks and regulators that were enabled
previously.

Fixes: 11c0d8fdcc ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/i2c/ov8865.c

@@ -2407,27 +2407,27 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable DOVDD regulator\n");
-			goto disable;
+			return ret;
 		}
 
 		ret = regulator_enable(sensor->avdd);
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable AVDD regulator\n");
-			goto disable;
+			goto disable_dovdd;
 		}
 
 		ret = regulator_enable(sensor->dvdd);
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable DVDD regulator\n");
-			goto disable;
+			goto disable_avdd;
 		}
 
 		ret = clk_prepare_enable(sensor->extclk);
 		if (ret) {
 			dev_err(sensor->dev, "failed to enable EXTCLK clock\n");
-			goto disable;
+			goto disable_dvdd;
 		}
 
 		gpiod_set_value_cansleep(sensor->reset, 0);
@@ -2436,14 +2436,16 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
 		/* Time to enter streaming mode according to power timings. */
 		usleep_range(10000, 12000);
 	} else {
-disable:
 		gpiod_set_value_cansleep(sensor->powerdown, 1);
 		gpiod_set_value_cansleep(sensor->reset, 1);
 
 		clk_disable_unprepare(sensor->extclk);
 
+disable_dvdd:
 		regulator_disable(sensor->dvdd);
+disable_avdd:
 		regulator_disable(sensor->avdd);
+disable_dovdd:
 		regulator_disable(sensor->dovdd);
 	}