x86/retpoline: Fix retpoline unwind

Currently objtool cannot understand retpolines, and thus cannot
generate ORC unwind information for them. This means that we cannot
unwind from the middle of a retpoline.

The recent ANNOTATE_INTRA_FUNCTION_CALL and UNWIND_HINT_RET_OFFSET
support in objtool enables it to understand the basic retpoline
construct. A further problem is that the ORC unwind information is
alternative invariant; IOW. every alternative should have the same
ORC, retpolines obviously violate this. This means we need to
out-of-line them.

Since all GCC generated code already uses out-of-line retpolines, this
should not affect performance much, if anything.

This will enable objtool to generate valid ORC data for the
out-of-line copies, which means we can correctly and reliably unwind
through a retpoline.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200428191700.210835357@infradead.org

arch/x86/include/asm/asm-prototypes.h

@@ -21,8 +21,15 @@ extern void cmpxchg8b_emu(void);
 #define DECL_INDIRECT_THUNK(reg) \
 	extern asmlinkage void __x86_indirect_thunk_ ## reg (void);
 
+#define DECL_RETPOLINE(reg) \
+	extern asmlinkage void __x86_retpoline_ ## reg (void);
+
 #undef GEN
 #define GEN(reg) DECL_INDIRECT_THUNK(reg)
 #include <asm/GEN-for-each-reg.h>
 
+#undef GEN
+#define GEN(reg) DECL_RETPOLINE(reg)
+#include <asm/GEN-for-each-reg.h>
+
 #endif /* CONFIG_RETPOLINE */

arch/x86/include/asm/nospec-branch.h

@@ -12,15 +12,6 @@
 #include <asm/msr-index.h>
 #include <asm/unwind_hints.h>
 
-/*
- * This should be used immediately before a retpoline alternative. It tells
- * objtool where the retpolines are so that it can make sense of the control
- * flow by just reading the original instruction(s) and ignoring the
- * alternatives.
- */
-#define ANNOTATE_NOSPEC_ALTERNATIVE \
-	ANNOTATE_IGNORE_ALTERNATIVE
-
 /*
  * Fill the CPU return stack buffer.
  *
@@ -82,34 +73,6 @@
 	.popsection
 .endm
 
-/*
- * These are the bare retpoline primitives for indirect jmp and call.
- * Do not use these directly; they only exist to make the ALTERNATIVE
- * invocation below less ugly.
- */
-.macro RETPOLINE_JMP reg:req
-	call	.Ldo_rop_\@
-.Lspec_trap_\@:
-	pause
-	lfence
-	jmp	.Lspec_trap_\@
-.Ldo_rop_\@:
-	mov	\reg, (%_ASM_SP)
-	ret
-.endm
-
-/*
- * This is a wrapper around RETPOLINE_JMP so the called function in reg
- * returns to the instruction after the macro.
- */
-.macro RETPOLINE_CALL reg:req
-	jmp	.Ldo_call_\@
-.Ldo_retpoline_jmp_\@:
-	RETPOLINE_JMP \reg
-.Ldo_call_\@:
-	call	.Ldo_retpoline_jmp_\@
-.endm
-
 /*
  * JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
  * indirect jmp/call which may be susceptible to the Spectre variant 2
@@ -117,10 +80,9 @@
  */
 .macro JMP_NOSPEC reg:req
 #ifdef CONFIG_RETPOLINE
-	ANNOTATE_NOSPEC_ALTERNATIVE
-	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg),	\
-		__stringify(RETPOLINE_JMP %\reg), X86_FEATURE_RETPOLINE,\
-		__stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_AMD
+	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
+		      __stringify(jmp __x86_retpoline_\reg), X86_FEATURE_RETPOLINE, \
+		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_AMD
 #else
 	jmp	*%\reg
 #endif
@@ -128,10 +90,9 @@
 
 .macro CALL_NOSPEC reg:req
 #ifdef CONFIG_RETPOLINE
-	ANNOTATE_NOSPEC_ALTERNATIVE
-	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg),\
-		__stringify(RETPOLINE_CALL %\reg), X86_FEATURE_RETPOLINE,\
-		__stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_AMD
+	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
+		      __stringify(call __x86_retpoline_\reg), X86_FEATURE_RETPOLINE, \
+		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_AMD
 #else
 	call	*%\reg
 #endif
@@ -165,16 +126,16 @@
  * which is ensured when CONFIG_RETPOLINE is defined.
  */
 # define CALL_NOSPEC						\
-	ANNOTATE_NOSPEC_ALTERNATIVE				\
 	ALTERNATIVE_2(						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
-	"call __x86_indirect_thunk_%V[thunk_target]\n",		\
+	"call __x86_retpoline_%V[thunk_target]\n",		\
 	X86_FEATURE_RETPOLINE,					\
 	"lfence;\n"						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
 	X86_FEATURE_RETPOLINE_AMD)
+
 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)
 
 #else /* CONFIG_X86_32 */
@@ -184,7 +145,6 @@
  * here, anyway.
  */
 # define CALL_NOSPEC						\
-	ANNOTATE_NOSPEC_ALTERNATIVE				\
 	ALTERNATIVE_2(						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\

arch/x86/lib/retpoline.S

@@ -7,15 +7,31 @@
 #include <asm/alternative-asm.h>
 #include <asm/export.h>
 #include <asm/nospec-branch.h>
+#include <asm/unwind_hints.h>
+#include <asm/frame.h>
 
 .macro THUNK reg
 	.section .text.__x86.indirect_thunk
 
+	.align 32
 SYM_FUNC_START(__x86_indirect_thunk_\reg)
-	CFI_STARTPROC
-	JMP_NOSPEC %\reg
-	CFI_ENDPROC
+	JMP_NOSPEC \reg
 SYM_FUNC_END(__x86_indirect_thunk_\reg)
+
+SYM_FUNC_START_NOALIGN(__x86_retpoline_\reg)
+	ANNOTATE_INTRA_FUNCTION_CALL
+	call	.Ldo_rop_\@
+.Lspec_trap_\@:
+	UNWIND_HINT_EMPTY
+	pause
+	lfence
+	jmp	.Lspec_trap_\@
+.Ldo_rop_\@:
+	mov	%\reg, (%_ASM_SP)
+	UNWIND_HINT_RET_OFFSET
+	ret
+SYM_FUNC_END(__x86_retpoline_\reg)
+
 .endm
 
 /*
@@ -32,6 +48,7 @@ SYM_FUNC_END(__x86_indirect_thunk_\reg)
 
 #define __EXPORT_THUNK(sym)	_ASM_NOKPROBE(sym); EXPORT_SYMBOL(sym)
 #define EXPORT_THUNK(reg)	__EXPORT_THUNK(__x86_indirect_thunk_ ## reg)
+#define EXPORT_RETPOLINE(reg)  __EXPORT_THUNK(__x86_retpoline_ ## reg)
 
 #undef GEN
 #define GEN(reg) THUNK reg
@@ -41,3 +58,6 @@ SYM_FUNC_END(__x86_indirect_thunk_\reg)
 #define GEN(reg) EXPORT_THUNK(reg)
 #include <asm/GEN-for-each-reg.h>
 
+#undef GEN
+#define GEN(reg) EXPORT_RETPOLINE(reg)
+#include <asm/GEN-for-each-reg.h>