Merge branch 'thinkpad-acpi' into for-next

thinkpad-acpi: acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-12-10 20:49:57 -08:00 · 2014-12-10 20:49:57 -08:00 · cc888de2c3
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@ -304,60 +304,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 	 * Linux ignores it, except for the machines enumerated below.
 	 */

-	/*
-	 * Lenovo has a mix of systems OSI(Linux) situations
-	 * and thus we can not wildcard the vendor.
-	 *
-	 * _OSI(Linux) helps sound
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
-	 * T400, T500
-	 * _OSI(Linux) has Linux specific hooks
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
-	 * _OSI(Linux) is a NOP:
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
-	 * DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
-	 */
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad R61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad X61",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T400",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T400"),
-		},
-	},
-	{
-	.callback = dmi_enable_osi_linux,
-	.ident = "Lenovo ThinkPad T500",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"),
-		},
-	},
 	/*
 	 * Without this this EEEpc exports a non working WMI interface, with
 	 * this it exports a working "good old" eeepc_laptop interface, fixing
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@ -6559,6 +6559,17 @@ static struct ibm_struct brightness_driver_data = {
 * bits 3-0 (volume).  Other bits in NVRAM may have other functions,
 * such as bit 7 which is used to detect repeated presses of MUTE,
 * and we leave them unchanged.
+ *
+ * On newer Lenovo ThinkPads, the EC can automatically change the volume
+ * in response to user input.  Unfortunately, this rarely works well.
+ * The laptop changes the state of its internal MUTE gate and, on some
+ * models, sends KEY_MUTE, causing any user code that responds to the
+ * mute button to get confused.  The hardware MUTE gate is also
+ * unnecessary, since user code can handle the mute button without
+ * kernel or EC help.
+ *
+ * To avoid confusing userspace, we simply disable all EC-based mute
+ * and volume controls when possible.
 */

 #ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
@ -6613,11 +6624,21 @@ enum tpacpi_volume_capabilities {
 	TPACPI_VOL_CAP_MAX
 };

+enum tpacpi_mute_btn_mode {
+	TP_EC_MUTE_BTN_LATCH  = 0,	/* Mute mutes; up/down unmutes */
+	/* We don't know what mode 1 is. */
+	TP_EC_MUTE_BTN_NONE   = 2,	/* Mute and up/down are just keys */
+	TP_EC_MUTE_BTN_TOGGLE = 3,	/* Mute toggles; up/down unmutes */
+};
+
 static enum tpacpi_volume_access_mode volume_mode =
 	TPACPI_VOL_MODE_MAX;

 static enum tpacpi_volume_capabilities volume_capabilities;
 static bool volume_control_allowed;
+static bool software_mute_requested = true;
+static bool software_mute_active;
+static int software_mute_orig_mode;

 /*
 * Used to syncronize writers to TP_EC_AUDIO and
@ -6635,6 +6656,8 @@ static void tpacpi_volume_checkpoint_nvram(void)
 		return;
 	if (!volume_control_allowed)
 		return;
+	if (software_mute_active)
+		return;

 	vdbg_printk(TPACPI_DBG_MIXER,
 		"trying to checkpoint mixer state to NVRAM...\n");
@ -6696,6 +6719,12 @@ static int volume_set_status_ec(const u8 status)

 	dbg_printk(TPACPI_DBG_MIXER, "set EC mixer to 0x%02x\n", status);

+	/*
+	 * On X200s, and possibly on others, it can take a while for
+	 * reads to become correct.
+	 */
+	msleep(1);
+
 	return 0;
 }

@ -6778,6 +6807,57 @@ unlock:
 	return rc;
 }

+static int volume_set_software_mute(bool startup)
+{
+	int result;
+
+	if (!tpacpi_is_lenovo())
+		return -ENODEV;
+
+	if (startup) {
+		if (!acpi_evalf(ec_handle, &software_mute_orig_mode,
+				"HAUM", "qd"))
+			return -EIO;
+
+		dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
+			    "Initial HAUM setting was %d\n",
+			    software_mute_orig_mode);
+	}
+
+	if (!acpi_evalf(ec_handle, &result, "SAUM", "qdd",
+			(int)TP_EC_MUTE_BTN_NONE))
+		return -EIO;
+
+	if (result != TP_EC_MUTE_BTN_NONE)
+		pr_warn("Unexpected SAUM result %d\n",
+			result);
+
+	/*
+	 * In software mute mode, the standard codec controls take
+	 * precendence, so we unmute the ThinkPad HW switch at
+	 * startup.  Just on case there are SAUM-capable ThinkPads
+	 * with level controls, set max HW volume as well.
+	 */
+	if (tp_features.mixer_no_level_control)
+		result = volume_set_mute(false);
+	else
+		result = volume_set_status(TP_EC_VOLUME_MAX);
+
+	if (result != 0)
+		pr_warn("Failed to unmute the HW mute switch\n");
+
+	return 0;
+}
+
+static void volume_exit_software_mute(void)
+{
+	int r;
+
+	if (!acpi_evalf(ec_handle, &r, "SAUM", "qdd", software_mute_orig_mode)
+	    || r != software_mute_orig_mode)
+		pr_warn("Failed to restore mute mode\n");
+}
+
 static int volume_alsa_set_volume(const u8 vol)
 {
 	dbg_printk(TPACPI_DBG_MIXER,
@ -6885,7 +6965,12 @@ static void volume_suspend(void)

 static void volume_resume(void)
 {
-	volume_alsa_notify_change();
+	if (software_mute_active) {
+		if (volume_set_software_mute(false) < 0)
+			pr_warn("Failed to restore software mute\n");
+	} else {
+		volume_alsa_notify_change();
+	}
 }

 static void volume_shutdown(void)
@ -6901,6 +6986,9 @@ static void volume_exit(void)
 	}

 	tpacpi_volume_checkpoint_nvram();
+
+	if (software_mute_active)
+		volume_exit_software_mute();
 }

 static int __init volume_create_alsa_mixer(void)
@ -7085,16 +7173,20 @@ static int __init volume_init(struct ibm_init_struct *iibm)
 			"mute is supported, volume control is %s\n",
 			str_supported(!tp_features.mixer_no_level_control));

-	rc = volume_create_alsa_mixer();
-	if (rc) {
-		pr_err("Could not create the ALSA mixer interface\n");
-		return rc;
-	}
+	if (software_mute_requested && volume_set_software_mute(true) == 0) {
+		software_mute_active = true;
+	} else {
+		rc = volume_create_alsa_mixer();
+		if (rc) {
+			pr_err("Could not create the ALSA mixer interface\n");
+			return rc;
+		}

-	pr_info("Console audio control enabled, mode: %s\n",
-		(volume_control_allowed) ?
-			"override (read/write)" :
-			"monitor (read only)");
+		pr_info("Console audio control enabled, mode: %s\n",
+			(volume_control_allowed) ?
+				"override (read/write)" :
+				"monitor (read only)");
+	}

 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_MIXER,
 		"registering volume hotkeys as change notification\n");
@ -9091,6 +9183,10 @@ MODULE_PARM_DESC(volume_control,
 		 "Enables software override for the console audio "
 		 "control when true");

+module_param_named(software_mute, software_mute_requested, bool, 0444);
+MODULE_PARM_DESC(software_mute,
+		 "Request full software mute control");
+
 /* ALSA module API parameters */
 module_param_named(index, alsa_index, int, 0444);
 MODULE_PARM_DESC(index, "ALSA index for the ACPI EC Mixer");