[media] s5p-csis: Replace phy_enable platform data callback with direct call

The phy_enable callback is common for all Samsung SoC platforms,
replace it with direct function call so the MIPI-CSI2 DPHY control
is also possible on device tree instantiated platforms.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/platform/s5p-fimc/mipi-csis.c

@@ -160,6 +160,7 @@ struct csis_pktbuf {
  *        protecting @format and @flags members
  * @pads: CSIS pads array
  * @sd: v4l2_subdev associated with CSIS device instance
+ * @index: the hardware instance index
  * @pdev: CSIS platform device
  * @regs: mmaped I/O registers memory
  * @supplies: CSIS regulator supplies
@@ -176,6 +177,7 @@ struct csis_state {
 	struct mutex lock;
 	struct media_pad pads[CSIS_PADS_NUM];
 	struct v4l2_subdev sd;
+	u8 index;
 	struct platform_device *pdev;
 	void __iomem *regs;
 	struct regulator_bulk_data supplies[CSIS_NUM_SUPPLIES];
@@ -666,14 +668,15 @@ static int __devinit s5pcsis_probe(struct platform_device *pdev)
 	spin_lock_init(&state->slock);
 
 	state->pdev = pdev;
+	state->index = max(0, pdev->id);
 
 	pdata = pdev->dev.platform_data;
-	if (pdata == NULL || pdata->phy_enable == NULL) {
+	if (pdata == NULL) {
 		dev_err(&pdev->dev, "Platform data not fully specified\n");
 		return -EINVAL;
 	}
 
-	if ((pdev->id == 1 && pdata->lanes > CSIS1_MAX_LANES) ||
+	if ((state->index == 1 && pdata->lanes > CSIS1_MAX_LANES) ||
 	    pdata->lanes > CSIS0_MAX_LANES) {
 		dev_err(&pdev->dev, "Unsupported number of data lanes: %d\n",
 			pdata->lanes);
@@ -756,7 +759,6 @@ e_clkput:
 
 static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 {
-	struct s5p_platform_mipi_csis *pdata = dev->platform_data;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
 	struct csis_state *state = sd_to_csis_state(sd);
@@ -768,7 +770,7 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 	mutex_lock(&state->lock);
 	if (state->flags & ST_POWERED) {
 		s5pcsis_stop_stream(state);
-		ret = pdata->phy_enable(state->pdev, false);
+		ret = s5p_csis_phy_enable(state->index, false);
 		if (ret)
 			goto unlock;
 		ret = regulator_bulk_disable(CSIS_NUM_SUPPLIES,
@@ -787,7 +789,6 @@ static int s5pcsis_pm_suspend(struct device *dev, bool runtime)
 
 static int s5pcsis_pm_resume(struct device *dev, bool runtime)
 {
-	struct s5p_platform_mipi_csis *pdata = dev->platform_data;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct v4l2_subdev *sd = platform_get_drvdata(pdev);
 	struct csis_state *state = sd_to_csis_state(sd);
@@ -805,7 +806,7 @@ static int s5pcsis_pm_resume(struct device *dev, bool runtime)
 					    state->supplies);
 		if (ret)
 			goto unlock;
-		ret = pdata->phy_enable(state->pdev, true);
+		ret = s5p_csis_phy_enable(state->index, true);
 		if (!ret) {
 			state->flags |= ST_POWERED;
 		} else {

include/linux/platform_data/mipi-csis.h

@@ -11,8 +11,6 @@
 #ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_
 #define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__
 
-struct platform_device;
-
 /**
  * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver
  * @clk_rate: bus clock frequency
@@ -34,10 +32,11 @@ struct s5p_platform_mipi_csis {
 
 /**
  * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control
- * @pdev: MIPI-CSIS platform device
- * @on: true to enable D-PHY and deassert its reset
- *	false to disable D-PHY
+ * @id:     MIPI-CSIS harware instance index (0...1)
+ * @on:     true to enable D-PHY and deassert its reset
+ *          false to disable D-PHY
+ * @return: 0 on success, or negative error code on failure
  */
-int s5p_csis_phy_enable(struct platform_device *pdev, bool on);
+int s5p_csis_phy_enable(int id, bool on);
 
 #endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */