From cd529af7eefae90b97fa90a24f1ad8ccef6ae41a Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Wed, 1 Oct 2014 04:25:32 -0500 Subject: [PATCH] mmc: sdhci-esdhc-imx: don't exit in case of no pinctrl states The commit ad93220de7da ("mmc: sdhci-esdhc-imx: change pinctrl state according to uhs mode") exits the probe in case there are no valid pinctrl states found. As there are configurations doing the pin mux properly in the boot loader, don't exit. Just warn, but go on in case if there are no pinctrl states in the device tree. Signed-off-by: Dirk Behme Signed-off-by: Andrew Gabbasov Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 587ee0edeb57..0135f00f826f 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1031,11 +1031,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl, PINCTRL_STATE_DEFAULT); - if (IS_ERR(imx_data->pins_default)) { - err = PTR_ERR(imx_data->pins_default); - dev_err(mmc_dev(host->mmc), "could not get default state\n"); - goto disable_clk; - } + if (IS_ERR(imx_data->pins_default)) + dev_warn(mmc_dev(host->mmc), "could not get default state\n"); host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; @@ -1123,7 +1120,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) } /* sdr50 and sdr104 needs work on 1.8v signal voltage */ - if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) { + if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) && + !IS_ERR(imx_data->pins_default)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,