mwifiex: add platform specific wakeup interrupt support

On some arm-based platforms, we need to configure platform specific
parameters by device tree node and also define our node as a child
node of parent SDIO host controller.
This patch parses these parameters from device tree. It includes
calibration data dowoload to firmware, wakeup pin configured to firmware,
and soc specific wake up gpio, which will be set as wakeup interrupt pin.

Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/marvell/mwifiex/main.h

@@ -37,6 +37,17 @@
 #include <linux/idr.h>
 #include <linux/inetdevice.h>
 #include <linux/devcoredump.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
 
 #include "decl.h"
 #include "ioctl.h"

drivers/net/wireless/marvell/mwifiex/sdio.c

@@ -73,6 +73,66 @@ static struct memory_type_mapping mem_type_mapping_tbl[] = {
 	{"EXTLAST", NULL, 0, 0xFE},
 };
 
+static const struct of_device_id mwifiex_sdio_of_match_table[] = {
+	{ .compatible = "marvell,sd8897" },
+	{ .compatible = "marvell,sd8997" },
+	{ }
+};
+
+static irqreturn_t mwifiex_wake_irq_wifi(int irq, void *priv)
+{
+	struct mwifiex_plt_wake_cfg *cfg = priv;
+
+	if (cfg->irq_wifi >= 0) {
+		pr_info("%s: wake by wifi", __func__);
+		cfg->wake_by_wifi = true;
+		disable_irq_nosync(irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* This function parse device tree node using mmc subnode devicetree API.
+ * The device node is saved in card->plt_of_node.
+ * if the device tree node exist and include interrupts attributes, this
+ * function will also request platform specific wakeup interrupt.
+ */
+static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
+{
+	struct mwifiex_plt_wake_cfg *cfg;
+	int ret;
+
+	if (!dev->of_node ||
+	    !of_match_node(mwifiex_sdio_of_match_table, dev->of_node)) {
+		pr_err("sdio platform data not available");
+		return -1;
+	}
+
+	card->plt_of_node = dev->of_node;
+	card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card->plt_wake_cfg),
+					  GFP_KERNEL);
+	cfg = card->plt_wake_cfg;
+	if (cfg && card->plt_of_node) {
+		cfg->irq_wifi = irq_of_parse_and_map(card->plt_of_node, 0);
+		if (!cfg->irq_wifi) {
+			dev_err(dev, "fail to parse irq_wifi from device tree");
+		} else {
+			ret = devm_request_irq(dev, cfg->irq_wifi,
+					       mwifiex_wake_irq_wifi,
+					       IRQF_TRIGGER_LOW,
+					       "wifi_wake", cfg);
+			if (ret) {
+				dev_err(dev,
+					"Failed to request irq_wifi %d (%d)\n",
+					cfg->irq_wifi, ret);
+			}
+			disable_irq(cfg->irq_wifi);
+		}
+	}
+
+	return 0;
+}
+
 /*
  * SDIO probe.
  *
@@ -127,6 +187,9 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		return -EIO;
 	}
 
+	/* device tree node parsing and platform specific configuration*/
+	mwifiex_sdio_probe_of(&func->dev, card);
+
 	if (mwifiex_add_card(card, &add_remove_card_sem, &sdio_ops,
 			     MWIFIEX_SDIO)) {
 		pr_err("%s: add card failed\n", __func__);
@@ -183,6 +246,13 @@ static int mwifiex_sdio_resume(struct device *dev)
 	mwifiex_cancel_hs(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA),
 			  MWIFIEX_SYNC_CMD);
 
+	/* Disable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_wifi >= 0) {
+		disable_irq_wake(card->plt_wake_cfg->irq_wifi);
+		if (!card->plt_wake_cfg->wake_by_wifi)
+			disable_irq(card->plt_wake_cfg->irq_wifi);
+	}
+
 	return 0;
 }
 
@@ -262,6 +332,13 @@ static int mwifiex_sdio_suspend(struct device *dev)
 
 	adapter = card->adapter;
 
+	/* Enable platform specific wakeup interrupt */
+	if (card->plt_wake_cfg && card->plt_wake_cfg->irq_wifi >= 0) {
+		card->plt_wake_cfg->wake_by_wifi = false;
+		enable_irq(card->plt_wake_cfg->irq_wifi);
+		enable_irq_wake(card->plt_wake_cfg->irq_wifi);
+	}
+
 	/* Enable the Host Sleep */
 	if (!mwifiex_enable_hs(adapter)) {
 		mwifiex_dbg(adapter, ERROR,

drivers/net/wireless/marvell/mwifiex/sdio.h

@@ -154,6 +154,11 @@
 	a->mpa_rx.start_port = 0;					\
 } while (0)
 
+struct mwifiex_plt_wake_cfg {
+	int irq_wifi;
+	bool wake_by_wifi;
+};
+
 /* data structure for SDIO MPA TX */
 struct mwifiex_sdio_mpa_tx {
 	/* multiport tx aggregation buffer pointer */
@@ -237,6 +242,8 @@ struct mwifiex_sdio_card_reg {
 struct sdio_mmc_card {
 	struct sdio_func *func;
 	struct mwifiex_adapter *adapter;
+	struct device_node *plt_of_node;
+	struct mwifiex_plt_wake_cfg *plt_wake_cfg;
 
 	const char *firmware;
 	const struct mwifiex_sdio_card_reg *reg;

drivers/net/wireless/marvell/mwifiex/sta_cmd.c

@@ -2162,6 +2162,7 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 	enum state_11d_t state_11d;
 	struct mwifiex_ds_11n_tx_cfg tx_cfg;
 	u8 sdio_sp_rx_aggr_enable;
+	int data;
 
 	if (first_sta) {
 		if (priv->adapter->iface_type == MWIFIEX_PCIE) {
@@ -2182,9 +2183,16 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 		 * The cal-data can be read from device tree and/or
 		 * a configuration file and downloaded to firmware.
 		 */
-		adapter->dt_node =
-				of_find_node_by_name(NULL, "marvell_cfgdata");
-		if (adapter->dt_node) {
+		if (priv->adapter->iface_type == MWIFIEX_SDIO &&
+		    adapter->dev->of_node) {
+			adapter->dt_node = adapter->dev->of_node;
+			if (of_property_read_u32(adapter->dt_node,
+						 "marvell,wakeup-pin",
+						 &data) == 0) {
+				pr_debug("Wakeup pin = 0x%x\n", data);
+				adapter->hs_cfg.gpio = data;
+			}
+
 			ret = mwifiex_dnld_dt_cfgdata(priv, adapter->dt_node,
 						      "marvell,caldata");
 			if (ret)