PCI/ACPI: Tidy up MCFG quirk whitespace

With no blank lines, it's not obvious where the macro definitions end and
the uses begin.  Add some blank lines and reorder the ThunderX definitions.
No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v4.10+

drivers/acpi/pci_mcfg.c

@@ -54,6 +54,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
 
 #define QCOM_ECAM32(seg) \
 	{ "QCOM  ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
+
 	QCOM_ECAM32(0),
 	QCOM_ECAM32(1),
 	QCOM_ECAM32(2),
@@ -68,6 +69,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	{ "HISI  ", table_id, 0, (seg) + 1, MCFG_BUS_ANY, ops }, \
 	{ "HISI  ", table_id, 0, (seg) + 2, MCFG_BUS_ANY, ops }, \
 	{ "HISI  ", table_id, 0, (seg) + 3, MCFG_BUS_ANY, ops }
+
 	HISI_QUAD_DOM("HIP05   ",  0, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP06   ",  0, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ",  0, &hisi_pcie_ops),
@@ -77,6 +79,7 @@ static struct mcfg_fixup mcfg_quirks[] = {
 
 #define THUNDER_PEM_RES(addr, node) \
 	DEFINE_RES_MEM((addr) + ((u64) (node) << 44), 0x39 * SZ_16M)
+
 #define THUNDER_PEM_QUIRK(rev, node) \
 	{ "CAVIUM", "THUNDERX", rev, 4 + (10 * (node)), MCFG_BUS_ANY,	    \
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88001f000000UL, node) },  \
@@ -90,13 +93,15 @@ static struct mcfg_fixup mcfg_quirks[] = {
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) },  \
 	{ "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY,	    \
 	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) }
-	/* SoC pass2.x */
-	THUNDER_PEM_QUIRK(1, 0),
-	THUNDER_PEM_QUIRK(1, 1),
 
 #define THUNDER_ECAM_QUIRK(rev, seg)					\
 	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY,			\
 	&pci_thunder_ecam_ops }
+
+	/* SoC pass2.x */
+	THUNDER_PEM_QUIRK(1, 0),
+	THUNDER_PEM_QUIRK(1, 1),
+
 	/* SoC pass1.x */
 	THUNDER_PEM_QUIRK(2, 0),	/* off-chip devices */
 	THUNDER_PEM_QUIRK(2, 1),	/* off-chip devices */
@@ -112,9 +117,11 @@ static struct mcfg_fixup mcfg_quirks[] = {
 #define XGENE_V1_ECAM_MCFG(rev, seg) \
 	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
 		&xgene_v1_pcie_ecam_ops }
+
 #define XGENE_V2_ECAM_MCFG(rev, seg) \
 	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
 		&xgene_v2_pcie_ecam_ops }
+
 	/* X-Gene SoC with v1 PCIe controller */
 	XGENE_V1_ECAM_MCFG(1, 0),
 	XGENE_V1_ECAM_MCFG(1, 1),