net: phy: meson-gxl: add interrupt support

Enable interrupt support in meson-gxl PHY driver

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/meson-gxl.c

@@ -33,6 +33,14 @@
 #define  TSTCNTL_WRITE_ADDRESS	GENMASK(4, 0)
 #define TSTREAD1	21
 #define TSTWRITE	23
+#define INTSRC_FLAG	29
+#define  INTSRC_ANEG_PR		BIT(1)
+#define  INTSRC_PARALLEL_FAULT	BIT(2)
+#define  INTSRC_ANEG_LP_ACK	BIT(3)
+#define  INTSRC_LINK_DOWN	BIT(4)
+#define  INTSRC_REMOTE_FAULT	BIT(5)
+#define  INTSRC_ANEG_COMPLETE	BIT(6)
+#define INTSRC_MASK	30
 
 #define BANK_ANALOG_DSP		0
 #define BANK_WOL		1
@@ -193,16 +201,43 @@ read_status_continue:
 	return genphy_read_status(phydev);
 }
 
+static int meson_gxl_ack_interrupt(struct phy_device *phydev)
+{
+	int ret = phy_read(phydev, INTSRC_FLAG);
+
+	return ret < 0 ? ret : 0;
+}
+
+static int meson_gxl_config_intr(struct phy_device *phydev)
+{
+	u16 val;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		val = INTSRC_ANEG_PR
+			| INTSRC_PARALLEL_FAULT
+			| INTSRC_ANEG_LP_ACK
+			| INTSRC_LINK_DOWN
+			| INTSRC_REMOTE_FAULT
+			| INTSRC_ANEG_COMPLETE;
+	} else {
+		val = 0;
+	}
+
+	return phy_write(phydev, INTSRC_MASK, val);
+}
+
 static struct phy_driver meson_gxl_phy[] = {
 	{
 		.phy_id		= 0x01814400,
 		.phy_id_mask	= 0xfffffff0,
 		.name		= "Meson GXL Internal PHY",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_IS_INTERNAL,
+		.flags		= PHY_IS_INTERNAL | PHY_HAS_INTERRUPT,
 		.config_init	= meson_gxl_config_init,
 		.aneg_done      = genphy_aneg_done,
 		.read_status	= meson_gxl_read_status,
+		.ack_interrupt	= meson_gxl_ack_interrupt,
+		.config_intr	= meson_gxl_config_intr,
 		.suspend        = genphy_suspend,
 		.resume         = genphy_resume,
 	},