From cf8fb73c23aa806c990c8b926f61e60cf6a7bda9 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 6 Mar 2013 09:03:02 +0000 Subject: [PATCH] e1000e: add support for LTR on I217/I218 Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like" GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed when link is up (which must not exceed the maximum latency supported by the platform), otherwise specify there is no LTR requirement. Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop latencies in the LTR Extended Capability Structure in the PCIe Extended Capability register set, on this device LTR is set by writing the equivalent snoop/no-snoop latencies in the LTRV register in the MAC and set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB) message to the PMC. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 97 +++++++++++++++++++++ 1 file changed, 97 insertions(+) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 56c4935b2578..ad9d8f2dd868 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -838,6 +838,94 @@ release: return ret_val; } +/** + * e1000_platform_pm_pch_lpt - Set platform power management values + * @hw: pointer to the HW structure + * @link: bool indicating link status + * + * Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like" + * GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed + * when link is up (which must not exceed the maximum latency supported + * by the platform), otherwise specify there is no LTR requirement. + * Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop + * latencies in the LTR Extended Capability Structure in the PCIe Extended + * Capability register set, on this device LTR is set by writing the + * equivalent snoop/no-snoop latencies in the LTRV register in the MAC and + * set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB) + * message to the PMC. + **/ +static s32 e1000_platform_pm_pch_lpt(struct e1000_hw *hw, bool link) +{ + u32 reg = link << (E1000_LTRV_REQ_SHIFT + E1000_LTRV_NOSNOOP_SHIFT) | + link << E1000_LTRV_REQ_SHIFT | E1000_LTRV_SEND; + u16 lat_enc = 0; /* latency encoded */ + + if (link) { + u16 speed, duplex, scale = 0; + u16 max_snoop, max_nosnoop; + u16 max_ltr_enc; /* max LTR latency encoded */ + s64 lat_ns; /* latency (ns) */ + s64 value; + u32 rxa; + + if (!hw->adapter->max_frame_size) { + e_dbg("max_frame_size not set.\n"); + return -E1000_ERR_CONFIG; + } + + hw->mac.ops.get_link_up_info(hw, &speed, &duplex); + if (!speed) { + e_dbg("Speed not set.\n"); + return -E1000_ERR_CONFIG; + } + + /* Rx Packet Buffer Allocation size (KB) */ + rxa = er32(PBA) & E1000_PBA_RXA_MASK; + + /* Determine the maximum latency tolerated by the device. + * + * Per the PCIe spec, the tolerated latencies are encoded as + * a 3-bit encoded scale (only 0-5 are valid) multiplied by + * a 10-bit value (0-1023) to provide a range from 1 ns to + * 2^25*(2^10-1) ns. The scale is encoded as 0=2^0ns, + * 1=2^5ns, 2=2^10ns,...5=2^25ns. + */ + lat_ns = ((s64)rxa * 1024 - + (2 * (s64)hw->adapter->max_frame_size)) * 8 * 1000; + if (lat_ns < 0) + lat_ns = 0; + else + do_div(lat_ns, speed); + + value = lat_ns; + while (value > PCI_LTR_VALUE_MASK) { + scale++; + value = DIV_ROUND_UP(value, (1 << 5)); + } + if (scale > E1000_LTRV_SCALE_MAX) { + e_dbg("Invalid LTR latency scale %d\n", scale); + return -E1000_ERR_CONFIG; + } + lat_enc = (u16)((scale << PCI_LTR_SCALE_SHIFT) | value); + + /* Determine the maximum latency tolerated by the platform */ + pci_read_config_word(hw->adapter->pdev, E1000_PCI_LTR_CAP_LPT, + &max_snoop); + pci_read_config_word(hw->adapter->pdev, + E1000_PCI_LTR_CAP_LPT + 2, &max_nosnoop); + max_ltr_enc = max_t(u16, max_snoop, max_nosnoop); + + if (lat_enc > max_ltr_enc) + lat_enc = max_ltr_enc; + } + + /* Set Snoop and No-Snoop latencies the same */ + reg |= lat_enc | (lat_enc << E1000_LTRV_NOSNOOP_SHIFT); + ew32(LTRV, reg); + + return 0; +} + /** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure @@ -911,6 +999,15 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + if (hw->mac.type == e1000_pch_lpt) { + /* Set platform power management values for + * Latency Tolerance Reporting (LTR) + */ + ret_val = e1000_platform_pm_pch_lpt(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0;